Common use of Exterior Doors and Frames Clause in Contracts

Exterior Doors and Frames. Doors and frames at new main entrances shall be aluminum entrances or storefront material equal to systems designed and engineered by Kawneer Company, Inc. or Tubelite Division, Indal, Inc. Finish is to be dark bronze (M10-C22-A44). Exterior pedestrian door frames (that open directly into the Leased premises) and those doorframes of adjacent airlock vestibules shall be constructed to accept electric strike hardware for buzzer access, and prepped for intrusion alarm system contacts. All exterior doors and frames, except at main entrance, shall be custom hollow metal construction provided with heavy-duty commercial grade hardware. Door face sheets shall be commercial quality, roller leveled, cold rolled, 16 gauge steel with 18 gauge stiffeners at 6” on center. Provide polystyrene or urethane insulation core filler. All exposed steel surfaces shall be cleaned, bonded and coated with a baked on zinc chromate based prime paint. Frames shall be prefabricated combination buck, frame, and trim type. Mitered joints shall have locking tabs at frame rabbets and backboards. All interior door frames shall be furnished with rubber bumpers. All exterior doors shall be weather-stripped, have commercial quality aluminum threshold of low profile (beveled) design to meet ADA and BFD specifications. Bevel angle shall not exceed 300. Exterior doors shall be protected from water by metal flashing over the door heads. Interior vestibule exit doors shall be equipped with the Xxxx Rite door locking hardware: #4590 or # 4591 Latch Paddle or approved equal.

Exterior Doors and Frames. Doors and frames at new main entrances shall be aluminum entrances or storefront material equal to systems designed and engineered by Kawneer Company, Inc. or Tubelite Division, Indal, Inc. Finish is to be dark bronze (M10-C22-A44). Exterior pedestrian door frames (that open directly into the Leased premises) and those doorframes of adjacent airlock vestibules shall be constructed to accept electric strike hardware for buzzer access, and prepped for intrusion alarm system contacts. All exterior doors and frames, except at main entrance, shall be custom hollow metal construction provided with heavy-duty commercial grade hardware. Door face sheets shall be commercial quality, roller leveled, cold rolled, 16 gauge steel with 18 gauge stiffeners at 6” on center. Provide polystyrene or urethane insulation core filler. All exposed steel surfaces shall be cleaned, bonded and coated with a baked on zinc chromate based prime paint. Frames shall be prefabricated combination buck, frame, and trim type. Mitered joints shall have locking tabs at frame rabbets and backboards. All interior door frames shall be furnished with rubber bumpers. All exterior doors shall be weather-stripped, have commercial quality aluminum threshold of low profile (beveled) design to meet ADA XXX and BFD specifications. Bevel angle shall not exceed 300. Exterior doors shall be protected from water by metal flashing over the door heads. Interior vestibule exit doors shall be equipped with the Xxxx Rite door locking hardware: #4590 or # 4591 Latch Paddle or approved equal.

Exterior Doors and Frames. Doors and frames at new main entrances shall be aluminum entrances or storefront material equal to systems designed and engineered by Kawneer Company, Inc. or Tubelite Division, Indal, Inc. Finish is to be dark bronze (M10-C22-A44). Exterior pedestrian door frames (that open directly into the Leased premises) and those doorframes of adjacent airlock vestibules shall be constructed to accept electric strike hardware (for swipe card access or buzzer access), and prepped for intrusion alarm system contacts. All exterior doors and frames, except at main entrance, shall be custom hollow metal construction provided with heavy-duty commercial grade hardware. Door face sheets shall be commercial quality, roller leveled, cold rolled, 16 gauge steel with 18 gauge stiffeners at 6” on center. Provide polystyrene or urethane insulation core filler. All exposed steel surfaces shall be cleaned, bonded and coated with a baked on zinc chromate based prime paint. Frames shall be prefabricated combination buck, frame, and trim type. Mitered joints shall have locking tabs at frame rabbets and backboards. All interior door frames shall be furnished with rubber bumpers. All exterior doors shall be weather-stripped, have commercial quality aluminum threshold of low profile (beveled) design to meet ADA XXX and BFD specifications. Bevel angle shall not exceed 300. Exterior doors shall be protected from water by metal flashing over the door heads. Interior vestibule exit doors shall be equipped with the Xxxx Rite door locking hardware: #4590 or # 4591 Latch Paddle or approved equal.