Provisional Application Upon signature of this Compact, and until this Compact has entered into force in accordance with Section 7.3, the Parties will provisionally apply the terms of this Compact; provided that, no MCC Funding, other than Compact Implementation Funding, will be made available or disbursed before this Compact enters into force.
Patent Applications It is understood by the parties that, pursuant to the Baylor Technology Transfer Agreement, MAS has the initial responsibility for filing, prosecution and maintenance of Patents and Patent Applications covering the Baylor Technology. The parties agree that, as between MAS and CTI, MAS shall be responsible for deciding whether and how to file, prosecute and maintain the Patents and Patent Applications, provided that:
(a) all decisions of MAS (whether substantive or procedural) concerning whether and how to file, prosecute and/or maintain any Patents and Patent Applications shall be acceptable to CTI, such acceptance not to be unreasonably withheld;
(b) with respect to any action permitted under Section 5.5 of the Baylor Technology Transfer Agreement or Section 5.5 of this Agreement, MAS will use legal counsel reasonably acceptable to CTI;
(c) MAS will provide CTI with (i) drafts of all filings relating to the Patents and Patent Applications and (ii) drafts of all correspondence to be sent by MAS to Baylor, the Patent and Trademark Office (the “PTO”) or any third party relating to the Patents and Patent Applications. Final versions of all such filings and correspondence shall be acceptable to CTI, such acceptance not to be unreasonably withheld;
(d) MAS will promptly provide CTI with copies of any notices and other correspondence received by CTI from Baylor, the PTO or any other third party relating to the Patents and Patent Applications, including, but not limited to, any notices received by MAS pursuant to Section 5.5 of the Baylor Technology Transfer Agreement;
(e) MAS will, if requested by CTI, provide notice to Baylor under any of the circumstances permitting notice pursuant to Section 5.5 of the Baylor Technology Transfer Agreement;
(f) MAS agrees to cooperate with CTI to whatever extent is reasonably necessary to procure patent protection of any rights regarding the Licensed Technology and agrees to execute any and all documents to give CTI the full benefit of the sublicenses and licenses granted herein;
(g) MAS represents and warrants that, as of the Effective Date, it has not received any notices from Baylor pursuant to Section 5.5(c) or Section 5.5(d) of the Baylor Technology Transfer Agreement. In the event MAS receives any notices from Baylor pursuant to Section 5.5(c) or Section 5.5(d) of the Baylor Technology Transfer Agreement after the Effective Date. MAS will provide a copy of such notice to CTI within five (5) business days of receipt of such notice by MAS. MAS will then take all actions requested by CTI to allow CTI to retain its rights granted under this Agreement, including, but not limited to, promptly notifying Baylor in the event CTI wishes MAS to proceed with any actions in connection with the Patents or Patent Applications.
New Application for Licensure Any time after the three-month period has lapsed from the Effective Date of this Agreement and Respondent has paid the Administrative Penalty set forth in Section III, Paragraph 1 of this Order, Respondent may apply for a new mortgage loan originator license or, as applicable, petition for the reinstatement of an MLO Activity Endorsement in any or all of the Participating States with the understanding that each State Mortgage Regulator reserves the rights to fully investigate such application for licensure or petition for reinstatement of an MLO Activity Endorsement and may either approve or deny such application or petition pursuant to the normal process for such licensing or endorsement investigations. No license application or petition described in this paragraph will be denied solely based on the facts, circumstances, or consensual resolution provided for in this Agreement. Respondent further agrees that Respondent must satisfy the Administrative Penalty provision prior to submitting an application for a new mortgage loan originator license or, as applicable, petition for the reinstatement of an MLO Activity Endorsement.
Filing of Patent Applications Each Party will make timely decisions regarding the filing of Patent Applications on the CRADA Subject Inventions made solely by its employee(s), and will notify the other Party in advance of filing. Collaborator will have the first opportunity to file a Patent Application on joint CRADA Subject Inventions and will notify PHS of its decision within sixty (60) days of an Invention being reported or at least thirty (30) days before any patent filing deadline, whichever occurs sooner. If Collaborator fails to notify PHS of its decision within that time period or notifies PHS of its decision not to file a Patent Application, then PHS has the right to file a Patent Application on the joint CRADA Subject Invention. Neither Party will be obligated to file a Patent Application. Collaborator will place the following statement in any Patent Application it files on a CRADA Subject Invention: “This invention was created in the performance of a Cooperative Research and Development Agreement with the [INSERT into Agency’s model as appropriate: National Institutes of Health, Food and Drug Administration, Centers for Disease Control and Prevention], an Agency of the Department of Health and Human Services. The Government of the United States has certain rights in this invention.” If either Party files a Patent Application on a joint CRADA Subject Invention, then the filing Party will include a statement within the Patent Application that clearly identifies the Parties and states that the joint CRADA Subject Invention was made under this CRADA.
General Application The rules set forth below in this Article VI shall apply for the purposes of determining each Member’s allocable share of the items of income, gain, loss and expense of the Company comprising Net Income or Net Loss for each Fiscal Year, determining special allocations of other items of income, gain, loss and expense, and adjusting the balance of each Member’s Capital Account to reflect the aforementioned general and special allocations. For each Fiscal Year, the special allocations in Section 6.03 hereof shall be made immediately prior to the general allocations of Section 6.02 hereof.
Application Form To apply for a pole attachment or conduit occupancy license under this Agreement, Applicant shall submit to SWBT two signed copies of the appropriate application forms. SWBT represents that the forms specified in subsections (a)-(b) are forms in use prior to the effective date of this Agreement and that SWBT is in the process of revising such forms to conform to the provisions of this Agreement and to streamline the application process. The parties therefore agree that the forms specified in subsections (a) and (b) will be interim forms only. SWBT reserves the right to change the format and content of these forms upon 60 days written notice to Applicant.
(a) To apply for a pole attachment license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make- Ready Authorization”) together with completed Form SW-9433 (“Pole Attachments”). An application for a pole attachment license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9433 and SW-9434 are attached to this Agreement as parts of APPENDIX III.
(b) To apply for a conduit occupancy license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make-Ready Authorization”) together with completed Form SW-9435 (“Conduit Occupancy”). An application for a conduit occupancy license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9434 and SW-9435 are attached to this Agreement as parts of APPENDIX III.
(c) Each application for a license under this Agreement shall include, at a minimum, the following information:
(1) the poles, ducts, and conduits (including all manholes) along Applicant’s proposed route to or within which Applicant desires to attach or place its facilities;
(2) a description of the facilities to be attached to SWBT’s poles and a description of the facilities to be placed within each component of SWBT’s conduit system (including but not limited to ducts, conduits, manholes, and handholes) along the proposed route;
(3) for poles, the proposed points of attachment;
(4) for building entrance or building distribution ducts or conduits or other space within a building, a conspicuous statement, as required by Section 5.06 of this Agreement, that the application pertains to a building entrance or building distribution duct or conduit or other space within a building;
(5) if applicable, a conspicuous notation that the space requested is not to be assigned (or billed) to Applicant until SWBT has received Applicant’s written instruction to make such assignment or issued a license authorizing Applicant to occupy the space requested; and
(6) if applicable, a conspicuous statement that Applicant intends to occupy the space before the issuance of a license, as provided in Section 8.03 of this Agreement.
(d) Facilities descriptions which apply to multiple pole attachments or conduit occupancies need only be described once on any form. Facilities descriptions shall include, at a minimum, the following information:
(1) the number and types of cables, including the physical size (diameter) and weight (weight per foot);
(2) the number and types of strands, if any, which will be used to support the cables, including the rated holding capacity expressed in thousand pound increments (e.g., 2.2M) of such strands; and
(3) sufficient information to identify and describe the physical characteristics (size, dimensions, and weight) of apparatus enclosures and other facilities to be attached to SWBT’s poles or placed in SWBT’s conduit system.
(e) When it appears to Applicant that facilities modification, capacity expansion, or make-ready work may be required to accommodate Applicant’s access requests, Applicant shall describe the facilities modification, capacity expansion, or make-ready work which Applicant proposes. Applicant shall also describe its plans, if any, to use any infrequent construction technique or connectivity solution authorized under Section 6.03 to avoid high or unusual expenditures and state its reasons for the use of such technique or solution.
(f) Applicant acknowledges that the poles along a particular pole line or route may include poles owned by firms (such as electric utilities) other than SWBT, that it may be necessary for SWBT to rearrange its facilities or perform other make-ready work on poles other than poles it owns or controls in order to accommodate Applicant’s request for access to SWBT’s poles and that, at the time an application is submitted, it may be difficult for Applicant to determine with certainty whether a particular pole is owned or controlled by SWBT or by another entity. Accordingly, the application shall, to the extent feasible, identify all poles utilized by SWBT (without regard to ownership) along Applicant’s proposed route.
(g) Each application for a license under this Agreement shall be accompanied by a construction schedule showing Applicant’s projected dates for beginning and completing construction at the sites specified in the application. Information on this schedule may be used by SWBT’s engineering and outside plant construction personnel in scheduling work required to process Applicant’s applications and scheduling such capacity expansions, make- ready work, and facilities modifications, if any, as may be necessary to accommodate Applicant’s facilities.
(h) Applicant may include multiple cables in a single license application and may provide multiple services (e.g., CATV and non-CATV services) under the same cable sheath or jacket. When both CATV and non-CATV services are provided under the same cable sheath or jacket, or CATV and non-CATV services are provided using different cables attached or lashed to the same strand or otherwise occupying the same space on a pole or the same duct or inner duct within a conduit, Applicant will so advise SWBT and SWBT shall, if permitted by law, adjust its charges to enable SWBT to charge Applicant the rate applicable to telecommunications carriers rather than the rate applicable to cable television systems solely to provide cable service.
Listing Application If shares of any class of stock of the Company shall be listed on a national securities exchange, the Company shall, at its expense, include in its listing application all of the shares of the listed class then owned by any Investor.
Application Submission Submissions of a rental application does not guarantee approval or acceptance. It does not bind us to accept the application or to sign a Lease contact.
Application of Funding Techniques to Programs 6.3.1 The State shall apply the following funding techniques when requesting Federal funds for the component cash flows of the programs listed in sections 4.2 and 4.3 of this Agreement.
6.3.2 Programs Below are programs listed in Section 4.2 and Section 4.3.
How to get a TIN If you do not have a TIN, apply for one immediately. To apply for an SSN, get Form SS-5, Application for a Social Security Card, from your local SSA office or get this form online at xxx.XXX.xxx. You may also get this form by calling 0-000-000-0000. Use Form W-7, Application for IRS Individual Taxpayer Identification Number, to apply for an ITIN, or Form SS-4, Application for Employer Identification Number, to apply for an EIN. You can apply for an EIN online by accessing the IRS website at xxx.xxx.xxx/Xxxxxxxxxx and clicking on Employer Identification Number (EIN) under Starting a Business. Go to xxx.xxx.xxx/Xxxxx to view, download, or print Form W-7 and/or Form SS-4. Or, you can go to xxx.xxx.xxx/XxxxxXxxxx to place an order and have Form W-7 and/or SS-4 mailed to you within 10 business days. If you are asked to complete Form W-9 but do not have a TIN, apply for a TIN and write “Applied For” in the space for the TIN, sign and date the form, and give it to the requester. For interest and dividend payments, and certain payments made with respect to readily tradable instruments, generally you will have 60 days to get a TIN and give it to the requester before you are subject to backup withholding on payments. The 60-day rule does not apply to other types of payments. You will be subject to backup withholding on all such payments until you provide your TIN to the requester.
