REPURCHASE OF TRUST STUDENT LOANS; REIMBURSEMENT (A) Each party to these Master Terms shall give notice to the other parties promptly, in writing, upon the discovery of any breach of SLM ECFC’s representations and warranties made pursuant to Sections 5(A) and (B) hereof which has a materially adverse effect on the interest of Funding in any Trust Student Loan. In the event of such a material breach which is not curable by reinstatement of the applicable Guarantor’s guarantee of such Trust Student Loan, SLM ECFC shall repurchase any affected Trust Student Loan not later than 120 days following the earlier of the date of discovery of such material breach and the date of receipt of the Guarantor reject transmittal form with respect to such Trust Student Loan. In the event of such a material breach which is curable by reinstatement of the Guarantor’s guarantee of such Trust Student Loan, unless the material breach shall have been cured within 360 days following the earlier of the date of discovery of such material breach and the date of receipt of the Guarantor reject transmittal form with respect to such Trust Student Loan, SLM ECFC shall purchase such Trust Student Loan not later than the sixtieth day following the end of such 360-day period. SLM ECFC shall also remit as provided in Section 2.6 of the Administration Agreement on the date of repurchase of any Trust Student Loan pursuant to this Section 6(A) an amount equal to all non-guaranteed interest amounts and forfeited Interest Subsidy Payments and Special Allowance Payments with respect to such Trust Student Loan. In consideration of the purchase of any such Trust Student Loan pursuant to this Section 6(A), SLM ECFC shall remit the Purchase Amount in the manner specified in Section 2.6 of the Administration Agreement. In addition, if any breach of Sections 5(A) and (B) hereof by SLM ECFC does not trigger such repurchase obligation but does result in the refusal by a Guarantor to guarantee all or a portion of the accrued interest (or any obligation of Funding to repay such interest to a Guarantor), or the loss (including any obligation of Funding to repay the Department) of Interest Subsidy Payments and Special Allowance Payments, with respect to any Trust Student Loan affected by such breach, then SLM ECFC shall reimburse Funding by remitting an amount equal to the sum of all such non-guaranteed interest amounts and such forfeited Interest Subsidy Payments or Special Allowance Payments in the manner specified in Section 2.6 of the Administration Agreement not later than (i) the last day of the next Collection Period ending not less than 60 days from the date of the Guarantor’s refusal to guarantee all or a portion of accrued interest or loss of Interest Subsidy Payments or Special Allowance Payments, or (ii) in the case where SLM ECFC reasonably believes such losses are likely to be collected, not later than the last day of the next Collection Period ending not less than 360 days from the date of the Guarantor’s refusal to guarantee all or a portion of accrued interest or loss of Interest Subsidy Payments or Special Allowance Payments. At the time such payment is made, SLM ECFC shall not be required to reimburse Funding for interest that is then capitalized, however, such amounts shall be reimbursed if the borrower subsequently defaults and such capitalized interest is not paid by the Guarantor. Anything in this Section 6(A) to the contrary notwithstanding, if as of the last Business Day of any month the aggregate outstanding principal amount of Trust Student Loans with respect to which claims have been filed with and rejected by a Guarantor or with respect to which the Servicer determines that claims cannot be filed pursuant to the Higher Education Act as a result of a breach by SLM ECFC or the Servicer, exceeds 1% of the Pool Balance, SLM ECFC (or the Servicer as provided in the Servicing Agreement) shall purchase, within 30 days of a written request of the Eligible Lender Trustee or the Indenture Trustee, such affected Trust Student Loans in an aggregate principal amount such that after such purchase the aggregate principal amount of such affected Trust Student Loans is less than 1% of the Pool Balance. The Trust Student Loans to be purchased by SLM ECFC and the Servicer pursuant to the preceding sentence shall be based on the date of claim rejection (or the date of notice referred to in the first sentence of this Section 6(A)) with Trust Student Loans with the earliest such date to be repurchased first.
Purchase of Trust Student Loans; Reimbursement A. The Servicer, the Administrator, the Eligible Lender Trustee and the Indenture Trustee shall give notice to the other parties promptly, in writing, upon the discovery of any breach of the provisions of Section 3.1, 3.2, 3.3 or 3.4 which has a materially adverse effect on the interest of the Issuer. In the event of such a material breach which is not curable by reinstatement of the Guarantor's guarantee of such Trust Student Loan, the Servicer shall purchase the affected Trust Student Loan not later than 120 days following the earlier of the date of discovery of such material breach and the date of receipt of the Guarantor reject transmittal form with respect to such Trust Student Loan. In the event of a material breach with respect to such Trust Student Loan which is curable by reinstatement of the Guarantor's guarantee of such Trust Student Loan, unless the material breach shall have been cured within 360 days following the earlier of the date of discovery of such material breach and the date of receipt of the Guarantor reject transmittal form with respect to such Trust Student Loan, the Servicer shall purchase such Trust Student Loan not later than the sixtieth day following the end of such 360-day period. The purchase price hereunder will be the unpaid principal amount of such Trust Student Loan plus accrued interest (calculated using the applicable percentage that would have been insured pursuant to Section 428(b)(1)(G) of the Higher Education Act) plus an amount equal to all forfeited Interest Subsidy Payments and Special Allowance Payments with respect to such Trust Student Loan. The Servicer shall remit the purchase price to the Administrator as provided in Section 2.6 of the Administration Agreement on the date of purchase of any Trust Student Loan pursuant to this Section 3.5. In consideration of the purchase of any such Trust Student Loan pursuant to this Section 3.5, the Servicer shall remit the Purchase Amount in the manner specified in Section 2.6 of the Administration Agreement. Any breach that relates to compliance with the requirements of the Higher Education Act or of the applicable Guarantor but that does not affect such Guarantor's obligation to guarantee payments of a Trust Student Loan will not be considered to have a material adverse effect for purposes of this Section 3.5A.
Realization upon Trust Student Loans For the benefit of the Issuer, the Servicer shall use reasonable efforts consistent with its servicing practices and procedures that it utilizes with respect to comparable student loans that it services on behalf of SLM Corporation or any of its Affiliates and including all efforts that may be specified under the Higher Education Act or Guarantee Agreement in its servicing of any delinquent Trust Student Loans.
Manufactured Housing Loans Only See Coding 1 = Owned 2 = Short-term lease 3 = Long-term lease 99 = Unavailable MH-2 Community Ownership Structure If the manufactured home is situated in a community, a means of classifying ownership of the community. Manufactured Housing Numeric – Integer 2 99 Manufactured Housing Loans Only See Coding 1 = Public Institutional 2 = Public Non-Institutional 3 = Private Institutional 4 = Private Non-Institutional 5 = HOA-Owned 6 = Non-Community 99 = Unavailable MH-3 Year of Manufacture The year in which the home was manufactured (Model Year — YYYY Format). Required only in cases where a full appraisal is not provided. Manufactured Housing Numeric – Integer 2006 YYYY Manufactured Housing Loans Only 1901 = Unavailable MH-4 HUD Code Compliance Indicator (Y/N) Indicates whether the home was constructed in accordance with the 1976 HUD code. In general, homes manufactured after 1976 comply with this code. Manufactured Housing Numeric – Integer 1 9 Manufactured Housing Loans Only See Codes 0 = No 1 = Yes 99 = Unavailable MH-5 Gross Manufacturer’s Invoice Price The total amount that appears on the manufacturer’s invoice (typically includes intangible costs such as transportation, association, on-site setup, service and warranty costs, taxes, dealer incentives, and other fees). Manufactured Housing Numeric – Decimal 72570.62 9(10).99 Manufactured Housing Loans Only >= 0 MH-6 LTI (Loan-to-Invoice) Gross The ratio of the loan amount divided by the Gross Manufacturer’s Invoice Price (Field MH-5). Manufactured Housing Numeric – Decimal 0.75 9.999999 Manufactured Housing Loans Only >= 0 to <= 1 MH-7 Net Manufacturer’s Invoice Price The Gross Manufacturer’s Invoice Price (Field MH-5) minus intangible costs, including: transportation, association, on-site setup, service, and warranty costs, taxes, dealer incentives, and other fees. Manufactured Housing Numeric – Decimal 61570.62 9(10).99 Manufactured Housing Loans Only >= 0 MH-8 LTI (Net) The ratio of the loan amount divided by the Net Manufacturer’s Invoice Price (Field MH-7). Manufactured Housing Numeric – Decimal 0.62 9.999999 Manufactured Housing Loans Only >= 0 to <= 1 MH-9 Manufacturer Name The manufacturer of the subject property. (To be applied only in cases where no appraised value/other type of property valuation is available.) Manufactured Housing Text “XYZ Corp” Char (100) Manufactured Housing Loans Only (where no appraised value is provided) MH Manufacturer name in double quotation mxxxx XX-10 Model Name The model name of the subject property. (To be applied only in cases where no appraised value/other type of property valuation is available.) Manufactured Housing Text “DX5-916-X” Char (100) Manufactured Housing Loans Only (where no appraised value is provided) MH Model name in double quotation mxxxx XX-11 Down Payment Source An indicator of the source of the down payment used by the borrower to acquire the property and qualify for the mortgage. Manufactured Housing Numeric – Integer 2 99 Manufactured Housing Loans Only See Codes 1 = Cash 2 = Proceeds from trade in 3 = Land in Lieu 4 = Other 99 = Unavailable MH-12 Community/Related Party Lender (Y/N) An indicator of whether the loan was made by the community owner, an affiliate of the community owner or the owner of the real estate upon which the collateral is located. Manufactured Housing Numeric – Integer 1 99 Manufactured Housing Loans Only See Codes 0 = No 1 = Yes 99 = Unavailable MH-13 Defined Underwriting Criteria (Y/N) An indicator of whether the loan was made in accordance with a defined and/or standardized set of underwriting criteria. Manufactured Housing Numeric – Integer 1 99 Manufactured Housing Loans Only See Codes 0 = No 1 = Yes 99 = Unavailable MH-14 Chattel Indicator An Indicator of whether the secured property is classified as chattel or Real Estate. Manufactured Housing Numeric – Integer 1 99 Manufactured Housing Loans Only See Codes 0 = Real Estate 1 = Chattel 99 = Unavailable PURCHASE AGREEMENT
Mortgage Loans As of the Closing Date, in consideration of the Issuer’s delivery of the Notes and the Ownership Certificate to the Depositor or its designee, and concurrently with the execution and delivery of this Agreement, the Depositor does hereby transfer, assign, set over, deposit with and otherwise convey to the Issuer, without recourse, subject to Section 3.01, in trust, all the right, title and interest of the Depositor in and to all accounts, accounts receivable, contract rights, general intangibles, chattel paper, instruments, documents, money, deposit accounts, certificates of deposit, goods, notes, drafts, letters of credit, advices of credit, investment property, uncertificated securities claims and rights to payment of any and every kind consisting of, arising from or relating to any of the following: (a) the Mortgage Loans listed in the Mortgage Loan Schedule, and principal due and payable after the Cut-off Date, but not including interest and principal due and payable on any Mortgage Loans on or before the Cut-off Date, together with the Mortgage Files relating to such Mortgage Loans, (b) any Insurance Proceeds, REO Property, Liquidation Proceeds and other recoveries (in each case, subject to clause (a) above), (c) all Escrow Payments, (d) any Insurance Policies, (e) the rights of the Depositor under the Mortgage Loan Purchase Agreement, (f) the Depositor’s security interest in any collateral pledged to secure the Mortgage Loans, including the Mortgaged Properties, and (g) all income, revenues, issues, products, revisions, substitutions, replacements, profits, rents and all cash and non-cash proceeds of the foregoing to have and to hold, in trust; and the Indenture Trustee declares that, subject to the review provided for in Section 2.02, it has received and shall hold the Trust Estate, as Indenture Trustee, in trust, for the benefit and use of the Noteholders and for the purposes and subject to the terms and conditions set forth in this Agreement, and, concurrently with such receipt, the Issuer has issued and delivered the Notes and the Ownership Certificate to or upon the order of the Depositor, in exchange for the Mortgage Loans and the other property of the Trust Estate. Concurrently with the execution and delivery of this Agreement, the Depositor does hereby assign to the Issuer all of its rights and interest under the Mortgage Loan Purchase Agreement but without delegation of any of its obligations thereunder. The Issuer hereby accepts such assignment, and shall be entitled to exercise all the rights of the Depositor under the Mortgage Loan Purchase Agreement as if, for such purpose, it were the Depositor. Upon the issuance of the Notes, ownership in the Trust Estate shall be vested in the Issuer, subject to the lien created by the Indenture in favor of the Indenture Trustee, for the benefit of the Noteholders. The foregoing sale, transfer, assignment, set-over, deposit and conveyance does not and is not intended to result in creation or assumption by the Indenture Trustee of any obligation of the Depositor, the Seller, or any other Person in connection with the Mortgage Loans or any other agreement or instrument relating thereto except as specifically set forth herein. It is agreed and understood by the Seller, the Depositor and the Issuer (and the Depositor so represents and recognizes) that it is not intended that any Mortgage Loan to be included in the Trust Estate be (i) a "High-Cost Home Loan" as defined in the New Jersey Home Ownership Act effective November 27, 2003, (ii) a "High-Cost Home Loan" as defined in the New Mexico Home Loan Protection Act effective January 1, 2004, (iii) a "High-Cost Home Mortgage Loan" as defined in the Massachusetts Predatory Home Loan Practices Act effective November 7, 2004 or (iv) a "High Cost Home Loan" as defined in the Indiana Home Loan Practices Act effective January 1, 2005.
ADMINISTRATION AND SERVICING OF THE MORTGAGE LOANS Section 3.01 The Master Servicer to act as Master Servicer.
Collection of Trust Student Loan Payments A. The Servicer shall make reasonable efforts (including all efforts that may be specified under the Higher Education Act or any Guarantee Agreement) to collect all payments called for under the terms and provisions of the Trust Student Loans as and when the same shall become due and shall follow such collection procedures as it follows with respect to similar student loans that it services on behalf of SLM Corporation or any of its Affiliates. The Servicer shall allocate collections with respect to the Trust Student Loans between principal, interest and fees in accordance with Section 2.5 of the Administration Agreement. The Servicer may in its discretion waive any late payment charge or any other fees that may be collected in the ordinary course of servicing a Trust Student Loan. The Servicer may, at its option, retain any late payment charges that it collects.
Servicing of the Mortgage Loans Section 3.01.
Acquisition Loans The proceeds of the Acquisition Loans may be used only for the following purposes: (i) for working capital and general corporate purposes, including, without limitation, the issuance of Letters of Credit and to pay outstanding Floor Plan Loans; and (ii) to make Permitted Acquisitions.
Mortgage Loan repurchased (The Master Servicer hereby certifies that the Purchase Price has been credited to the Collection Account or the Certificate Account (whichever is applicable) pursuant to the Trust Agreement.)