Common use of Final Design Construction Plans Clause in Contracts

Final Design Construction Plans. Engineer shall submit final design construction plans for review and approval by the City. Engineer shall prepare final design construction plans at a horizontal scale of 1"=20' and a vertical scale of 1"=5' (horizontal scale of 1"=40' and a vertical scale of 1"=4' may be used with prior permission by the City) on 22" x 34" sheets (each sheet shall be sealed, dated, and signed by a Registered Professional Engineer in the State of Texas), specifications and special provisions and abutting property attachment. Final design construction plans shall include the following: 1. Standard City title page with location map and revision block in the lower right corner showing date of revision, description of revision and initials of the revisor. 2. Plan and profile sheets of water and/or sanitary sewer improvements incorporating existing improvements as outlined in Sections III.A. and III.D. (A breakdown of the pay quantities shall be indicated for each plan and profile sheet. The breakdown may be shown on a summary of quantities sheet or may be indicated on the individual plan profile sheets.) 3. Detail and standard sheets. 4. Proposals, final opinion of probable cost, special provisions and specifications and contract document booklet. 5. All plans, documents, provisions, specifications, attachments and correspondence that leave Engineer’s office shall be dated. 6. Street addresses and legal description. 7. Provide Storm Water Pollution Prevention Plan including provisions for erosion control and waste management for compliance with the Clean Water Act. 8. Provide the final design construction plans on a CD with the formats as listed below. (Rev. 10/2014) • The AutoCad 2012 files, including survey • The Black and White Drawings (bi-tonal/single bit) o 300 DPI Tiff o CCITT Group 4 compression • Color or Grey Scale o 300 DPI Tiff o LZW compression

Final Design Construction Plans. Engineer shall submit final design construction plans for review and approval by the City. Engineer shall prepare final design construction plans at a horizontal scale of 1"=20' and a vertical scale of 1"=5' (horizontal scale of 1"=40' and a vertical scale of 1"=4' may be used with prior permission by the City) on 22" x 34" sheets (each sheet shall be sealed, dated, and signed by a Registered Professional Engineer in the State of Texas), specifications and special provisions and abutting property attachment. Final design construction plans shall include the following: 1. Standard City title page with location map and revision block in the lower right corner showing date of revision, description of revision and initials of the revisor. 2. Plan and profile sheets of water and/or sanitary sewer improvements incorporating existing improvements as outlined in Sections III.A. and III.D. (A breakdown of the pay quantities shall be indicated for each plan and profile sheet. The breakdown may be shown on a summary of quantities sheet or may be indicated on the individual plan profile sheets.) 3. Detail and standard sheets. 4. Proposals, final opinion of probable cost, special provisions and specifications and contract document booklet. 5. All plans, documents, provisions, specifications, attachments and correspondence that leave Engineer’s office shall be dated. 6. Street addresses and legal description. 7. Provide Storm Water Pollution Prevention Plan including provisions for erosion control and waste management plan for compliance with the Clean Water Act. 8. Provide the final design construction plans on a CD with the formats as listed below. (Rev. 10/2014) • The AutoCad 2012 files, including survey • The Black and White Drawings (bi-tonal/single bit) o 300 DPI Tiff o CCITT Group 4 compression • Color or Grey Scale o 300 DPI Tiff o LZW compression

Final Design Construction Plans. Engineer shall submit final design construction plans for review and approval by the City. Engineer shall prepare final design construction plans at a horizontal scale of 1"=20' and a vertical scale of 1"=5' (horizontal scale of 1"=40' and a vertical scale of 1"=4' may be used with prior permission by the City) on 22" x 34" sheets (each sheet shall be sealed, dated, and signed by a Registered Professional Engineer in the State of Texas), specifications and special provisions and abutting property attachment. Final design construction plans shall include the following: 1. Standard City title page with location map and revision block in the lower right corner showing date of revision, description of revision and initials of the revisor. 2. Plan and profile sheets of water and/or sanitary sewer improvements incorporating existing improvements as outlined in Sections III.A. and III.D. (A breakdown of the pay quantities shall be indicated for each plan and profile sheet. The breakdown may be shown on a summary of quantities sheet or may be indicated on the individual plan profile sheets.) 3. Detail and standard sheets. 4. Proposals, final opinion of probable cost, special provisions and specifications and contract document booklet. 5. All plans, documents, provisions, specifications, attachments and correspondence that leave Engineer’s office shall be dated. 6. Street addresses and legal description. 7. Provide Storm Water Pollution Prevention Plan including provisions for erosion control and waste management for compliance with the Clean Water Act. 8. Provide the final design construction plans on a CD with the formats as listed below. (Rev. 10/2014) • The AutoCad 2012 files, including survey • The Black and White Drawings (bi-tonal/single bit) o 300 DPI Tiff o CCITT Group 4 compression • Color or Grey Scale o 300 DPI Tiff o LZW compression

Final Design Construction Plans. Engineer shall submit final design construction plans for review and approval by the City. Engineer shall prepare final design construction plans at a horizontal scale of 1"=20' and a vertical scale of 1"=5' (horizontal scale of 1"=40' and a vertical scale of 1"=4' may be used with prior permission by the City) on 22" x 34" sheets (each sheet shall be sealed, dated, and signed by a Registered Professional Engineer in the State of Texas), specifications and special provisions and abutting property attachment. Final design construction plans shall include the following: 1. Standard City title page with location map and revision block in the lower right corner showing date of revision, description of revision and initials of the revisor. 2. Plan and profile sheets of water and/or sanitary sewer improvements incorporating existing improvements as outlined in Sections III.A. and III.D. (A breakdown of the pay quantities shall be indicated for each plan and profile sheet. The breakdown may be shown on a summary of quantities sheet or may be indicated on the individual plan profile sheets.) 3. Detail and standard sheets. 4. Proposals, final opinion of probable cost, special provisions and specifications and contract document booklet. 5. All plans, documents, provisions, specifications, attachments and correspondence that leave Engineer’s office shall be dated. 6. Street addresses and legal description. 7. Provide Storm Water Pollution Prevention Plan including provisions for erosion control and waste management for plan in compliance with the Clean Water Act, if necessary. 8. Provide the final design construction plans on a CD with the formats as listed below. (Rev. 10/2014) •  The AutoCad 2012 files, including survey •  The Black and White Drawings (bi-tonal/single bit) o 300 DPI Tiff o CCITT Group 4 compression •  Color or Grey Scale o 300 DPI Tiff o LZW compression

Final Design Construction Plans. Engineer shall submit final design construction plans for review and approval by the City. Engineer shall prepare final design construction plans at a horizontal scale of 1"=20' and a vertical scale of 1"=5' (horizontal scale of 1"=40' and a vertical scale of 1"=4' may be used with prior permission by the City) on 22" x 34" sheets (each sheet shall be sealed, dated, and signed by a Registered Professional Engineer in the State of Texas), specifications and special provisions and abutting property attachment. Final design construction plans shall include the following: 1. Standard City title page with location map and revision block in the lower right corner showing date of revision, description of revision and initials of the revisor. 2. Plan and profile sheets of water and/or sanitary sewer improvements incorporating existing improvements as outlined in Sections III.A. and III.D. (A breakdown of the pay quantities shall be indicated for each plan and profile sheet. The breakdown may be shown on a summary of quantities sheet or may be indicated on the individual plan profile sheets.) 3. Detail and standard sheets. 4. Proposals, final opinion of probable cost, special provisions and specifications and contract document booklet. 5. All plans, documents, provisions, specifications, attachments and correspondence that leave Engineer’s office shall be dated. 6. Street addresses and legal description. 7. Provide Storm Water Pollution Prevention Plan including provisions for erosion control and waste management for compliance with the Clean Water Act. 8. Provide the final design construction plans on a CD with the formats as listed below. (Rev. 10/2014) • The AutoCad 2012 files, including survey • The Black and White Drawings (bi-tonal/single bit) o 300 DPI Tiff o CCITT Group 4 compression • Color or Grey Scale o 300 DPI Tiff o LZW compression

Final Design Construction Plans. Engineer shall submit final design construction plans for review and approval by the City. Engineer shall prepare final design construction plans at a horizontal scale of 1"=20' and a vertical scale of 1"=5' (horizontal scale of 1"=40' and a vertical scale of 1"=4' may be used with prior permission by the City) on 22" x 34" sheets (each sheet shall be sealed, dated, and signed by a Registered Professional Engineer in the State of Texas), specifications and special provisions and abutting property attachment. Final design construction plans shall include the following: 1. Standard City title page with location map and revision block in the lower right corner showing date of revision, description of revision and initials of the revisor. 2. Plan and profile sheets of water and/or sanitary sewer improvements incorporating existing improvements as outlined in Sections III.A. and III.D. (A breakdown of the pay quantities shall be indicated for each plan and profile sheet. The breakdown may be shown on a summary of quantities sheet or may be indicated on the individual plan profile sheets.) 3. Detail and standard sheets. 4. Proposals, final opinion of probable cost, special provisions and specifications and contract document booklet. 5. All plans, documents, provisions, specifications, attachments and correspondence that leave Engineer’s office shall be dated. 6. Street addresses and legal description. 7. Provide Storm Water Pollution Prevention Plan including provisions for erosion control and waste management for plan in compliance with the Clean Water Act. 8. Provide the final design construction plans on a CD with the formats as listed below. (Rev. 10/2014) •  The AutoCad 2012 files, including survey •  The Black and White Drawings (bi-tonal/single bit) o 300 DPI Tiff o CCITT Group 4 compression •  Color or Grey Scale o 300 DPI Tiff o LZW compressioncompression H. Drainage Evaluation 1. Evaluate topographic survey along Xxxxxxxxx Dr. corridor from Center St. to the northernmost driveway of the Meditation Center of Texas. 2. Determine if a proposed ditch can be constructed for approximately 650’ on both sides along Xxxxxxxxx Dr. to provide positive drainage from Center St. to the existing drainage channel southeast of Xxxxxx Ct. 3. Prepare an 11”x17” exhibit showing results of the topographic survey prepared in Section III-A. The exhibit will indicate the longitudinal slope of the ditch, a typical section of the ditch, the construction limits, and identified any known constraints or conflicts. 4. Meet with City staff to discuss drainage options. 5. Provide grading plan for improvements to existing ditches. 6. This scope does not include preparing a drainage area map and performing any drainage analysis or calculations. 7. This scope does not include a public meeting, tree survey beyond what is described in Section III-A, structural design, and design of outfalls.