From AMYRIS Clause Samples

From AMYRIS. Upon the Joint Steering Committee’s determination that the final milestone under a Development Project Plan has been achieved with respect to a particular Lead Compound, subject to Section 3.2(d), AMYRIS shall automatically grant to the JV Company, an exclusive worldwide, irrevocable (except upon the unwinding of the JV Company, material breach or as otherwise provided in the Agreement or the definitive documents establishing the JV Company), right and license, with the right to sublicense, to (i) AMYRIS Background IP, (ii) AMYRIS Included IP, (iii) AMYRIS-Owned Collaboration IP and (iv) AMYRIS’ interest in Jointly-Owned Collaboration IP, in each case solely to Make and Sell such JV Company’s Product(s) consistent with the Agreement and the documents establishing the JV Company; provided, however, that such licenses will only permit further optimization of the Commercial Strain by means of mutagenesis, and not any strain engineering or method of genetic manipulation. This is in addition to the license granted in Section 6.5(b).
View SourceView Similar (3)
From AMYRIS. Amyris grants to Ginkgo a royalty-free, sublicensable, fully paid-up, perpetual (i.e., surviving any termination and extending after the Term) license to its Background Intellectual Property and Foreground Intellectual Property for the purposes of strain engineering and process development, scale-up and production within the Field with respect to the small molecule compound identified below in (A), subject to the following conditions: (A) Ginkgo grants Amyris a right of first refusal (“ROFR”) pursuant to the process described in Section 2.3(c)(iii) for scale-up and production (including strain engineering and optimization but only if necessary for scale-up and production) for any new chemical small molecule compound in the Field (other than an Excluded Product) developed by Ginkgo for a Third Party that requires third-party manufacturing after the Term; (B) in the event Amyris declines to exercise its ROFR, such license shall be subject to the Supplier Restrictions; (C) if Amyris exercises its ROFR, the Net Profits will be split between the parties in accordance with Section 6.2(a)(i) as though such molecule or ingredient were a “Product” hereunder; if Amyris declines its ROFR, then the Net Profits will be split as though such molecule or ingredient were a “Refused Product” hereunder where such molecule or ingredient uses the other Party’s Intellectual Property that is licensed under this Agreement; and (D) Ginkgo provides prompt written notice to Amyris for any such small molecule compounds for which Ginkgo will provide a ROFR pursuant to Section 2.3(c)(i)(A).
View Source

Related to From AMYRIS

  • Cooling Off Period You may terminate this Contract with immediate effect at any time within the period of 14 days after the date this Contract is entered into without incurring any liability to DFMC.

  • Additional Acceptable Uses of Student Data Contractor is prohibited from using Student Data for any secondary use not described in this agreement except: a. for adaptive learning or customized student learning purposes; b. to market an educational application or product to a parent or legal guardian of a student if Contractor did not use Data, shared by or collected per this Contract, to market the educational application or product; c. to use a recommendation engine to recommend to a student i. content that relates to learning or employment, within the third-party contractor's internal application, if the recommendation is not motivated by payment or other consideration from another party; or

  • Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters). The UCL-D will be offered in two versions - Short and Long. 2.4.2.2 A short UCL-D (18,000 feet or less) is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 ohms of resistance. 2.4.2.3 The long UCL-D (beyond 18,000 feet) is provisioned as a dry copper twisted pair longer than 18,000 feet and may have up to 12,000 feet of bridged tap and up to 2800 ohms of resistance. 2.4.2.4 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Granite. 2.4.2.5 These loops are not intended to support any particular services and may be utilized by Granite to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.2.6 BellSouth will make available the following UCL-Ds:

  • Reverse ADSL Loops If a CLEC’s ADSL Transmission Unit (including those integrated into DSLAMs) is attached to Sprint’s Network and if an ADSL Copper Loop should start at an outside location, and is looped through a host or remote, and then to the subscriber, the copper plant from the outside location to the Sprint host or remote central office must be a facility dedicated to ADSL transmission only and not part of Sprint’s regular feeder or distribution plant.

  • Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (DAMLs), and may have up to 6,000 feet of bridged tap between the End User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For Loops less than 18,000 feet and with less than 1300 Ohms resistance, the Loop will provide a voice grade transmission channel suitable for Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Makeup (LMU) process is not required to order and provision the UCL-ND. However, CBX One-Stop can request LMU for which additional charges would apply. 2.4.3.3 For an additional charge, BellSouth also will make available Loop Testing so that CBX One-Stop may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit A of this Attachment. 2.4.3.4 UCL-ND Loops are not intended to support any particular service and may be utilized by CBX One-Stop to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. The UCL- ND will include a NID at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire. 2.4.3.5 OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. OC-TS does not apply to this product. 2.4.3.6 CBX One-Stop may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.