HealthStream Owned Courseware. A fee equal to * per course for all HealthStream Courseware that is not Regulatory Courseware or Content Partner Courseware.
HealthStream Owned Courseware Sample Clauses
Related to HealthStream Owned Courseware
Foreign-Owned Companies in Connection with Critical Infrastructure If Texas Government Code, Section 2274.0102(a)(1) (relating to prohibition on contracts with certain foreign-owned companies in connection with critical infrastructure) is applicable to this Contract, pursuant to Government Code Section 2274.0102, Contractor certifies that neither it nor its parent company, nor any affiliate of Contractor or its parent company, is: (1) majority owned or controlled by citizens or governmental entities of China, Iran, North Korea, Russia, or any other country designated by the Governor under Government Code Section 2274.0103, or (2) headquartered in any of those countries.
Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters). 2.4.2.2 A UCL-D will be 18,000 feet or less in length and is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 Ohms of resistance. 2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Telepak Networks. 2.4.2.4 These Loops are not intended to support any particular services and may be utilized by Telepak Networks to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire. 2.4.2.5 Upon the Effective Date of this Agreement, Unbundled Copper Loop – Long (UCL-L) elements will no longer be offered by BellSouth and no new orders for UCL-L will be accepted. Any existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement will be grandfathered at the rates set forth in the Parties’ interconnection agreement that was in effect immediately prior to the Effective Date of this Agreement. Existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement may remain connected, maintained and repaired according to BellSouth’s TR73600 and may remain connected until such time as they are disconnected by Telepak Networks or BellSouth provides ninety
Company Intellectual Property The Executive agrees to promptly disclose to the Company any and all work product, inventions, artistic works, works of authorship, designs, methods, processes, technology, patterns, techniques, data, Confidential Information, patents, trade secrets, trademarks, domain names, copyrights, and the like, and all other intellectual property relating to the business of the Company and any of its affiliates which are created, authored, composed, invented, discovered, performed, perfected, or learned by the Executive (either solely or jointly with others) during the Employment Term (collectively, together with such intellectual property as may be owned or acquired by the Company, the “Company Intellectual Property”). The Company Intellectual Property shall be the sole and absolute property of the Company and its affiliates. All work performed by the Executive in authoring, composing, inventing, creating, developing or modifying Company Intellectual Property and/or other work product to which copyright protection may attach during the course of the Executive’s employment with the Company shall be considered “works made for hire” to the extent permitted under applicable copyright law and will be considered the sole property of the Company. To the extent such works, work product or Company Intellectual Property are not considered “works made for hire,” all right, title, and interest to such works, work product and Company Intellectual Property, including, but not limited to, all copyrights, patents, trademarks, rights of publicity, and trade secrets, is hereby assigned to the Company and the Executive agrees, at the Company’s expense, to execute any documents requested by the Company or any of its affiliates at any time in relation to such assignment. The Executive acknowledges and agrees that the Company is and will be the sole and absolute owner of all trademarks, service marks, domain names, patents, copyrights, trade dress, trade secrets, business names, rights of publicity, inventions, proprietary know-how and information of any type, whether or not in writing, and all other intellectual property used by the Company or held for use in the business of the Company, including all Company Intellectual Property. The Executive further acknowledges and agrees that any and all derivative works, developments, or improvements based on intellectual property, materials and assets subject to this Section 6 created during the Employment Term (including, without limitation, Company Intellectual Property) shall be exclusively owned by the Company. The Executive will cooperate with the Company and any of its affiliates, at no additional cost to such parties (whether during or after the Employment Term), in the confirmation, registration, protection and enforcement of the rights and property of the Company and its affiliates in such intellectual property, materials and assets, including, without limitation, the Company Intellectual Property.
Contractor Intellectual Property Contractor shall retain all right, title and interest in and to any work, ideas, inventions, discoveries, tools, methodology, computer programs, processes and improvements and any other intellectual property, tangible or intangible, that has been created by Contractor prior to entering into this Contract (“Contractor Intellectual Property”). Should the State require a license for the use of Contractor Intellectual Property in connection with the development or use of the items that Contractor is required to deliver to the State under this Contract, including Work Product (“Deliverables”), the Contractor shall grant the State a royalty-free license for such development and use. For the avoidance of doubt, Work Product shall not be deemed to include Contractor Intellectual Property, provided the State shall be granted an irrevocable, perpetual, non-exclusive royalty-free license to use any such Contractor Intellectual Property that is incorporated into Work Product.
Intellectual Property Ownership We, our affiliates and our licensors will own all right, title and interest in and to all Products. You will be and remain the owner of all rights, title and interest in and to Customer Content. Each party will own and retain all rights in its trademarks, logos and other brand elements (collectively, “Trademarks”). To the extent a party grants any rights or licenses to its Trademarks to the other party in connection with this Agreement, the other party’s use of such Trademarks will be subject to the reasonable trademark guidelines provided in writing by the party that owns the Trademarks.
Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Lightyear can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Lightyear may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Lightyear to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Lightyear may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.
Documents & Data; Licensing of Intellectual Property This Agreement creates a non-exclusive and perpetual license for City to copy, use, modify, reuse, or sublicense any and all copyrights, designs, and other intellectual property embodied in plans, specifications, studies, drawings, estimates, and other documents or works of authorship fixed in any tangible medium of expression, including but not limited to, physical drawings or data magnetically, electronically or otherwise recorded or stored, which are prepared or caused to be prepared by Consultant under this Agreement (“Documents & Data”). All Documents & Data shall be and remain the property of City, and shall not be used in whole or in substantial part by Consultant on other projects without the City's express written permission. Within thirty (30) days following the completion, suspension, abandonment or termination of this Agreement, Consultant shall provide to City reproducible copies of all Documents & Data, in a form and amount required by City. City reserves the right to select the method of document reproduction and to establish where the reproduction will be accomplished. The reproduction expense shall be borne by City at the actual cost of duplication. In the event of a dispute regarding the amount of compensation to which the Consultant is entitled under the termination provisions of this Agreement, Consultant shall provide all Documents & Data to City upon payment of the undisputed amount. Consultant shall have no right to retain or fail to provide to City any such documents pending resolution of the dispute. In addition, Consultant shall retain copies of all Documents & Data on file for a minimum of five (5) years following completion of the Project, and shall make copies available to City upon the payment of actual reasonable duplication costs. In addition, before destroying the Documents & Data following this retention period, Consultant shall make a reasonable effort to notify City and provide City with the opportunity to obtain the documents.
Owned Intellectual Property Schedule 5.11 is a complete list of all patents, applications for patents, trademarks, applications to register trademarks, service marks, applications to register service marks, mask works, trade dress and copyrights for which the Borrower is the owner of record (the “Owned Intellectual Property”). Except as disclosed on Schedule 5.11, (i) the Borrower owns the Owned Intellectual Property free and clear of all restrictions (including covenants not to xxx a third party), court orders, injunctions, decrees, writs or Liens, whether by written agreement or otherwise, (ii) no Person other than the Borrower owns or has been granted any right in the Owned Intellectual Property, (iii) all Owned Intellectual Property is valid, subsisting and enforceable and (iv) the Borrower has taken all commercially reasonable action necessary to maintain and protect the Owned Intellectual Property.
TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES The goal of this task is to develop a plan to make the knowledge gained, experimental results, and lessons learned available to the public and key decision makers. • Prepare an Initial Fact Sheet at start of the project that describes the project. Use the format provided by the CAM. • Prepare a Final Project Fact Sheet at the project’s conclusion that discusses results. Use the format provided by the CAM. • Prepare a Technology/Knowledge Transfer Plan that includes: o An explanation of how the knowledge gained from the project will be made available to the public, including the targeted market sector and potential outreach to end users, utilities, regulatory agencies, and others. o A description of the intended use(s) for and users of the project results. o Published documents, including date, title, and periodical name. o Copies of documents, fact sheets, journal articles, press releases, and other documents prepared for public dissemination. These documents must include the Legal Notice required in the terms and conditions. Indicate where and when the documents were disseminated. o A discussion of policy development. State if project has been or will be cited in government policy publications, or used to inform regulatory bodies. o The number of website downloads or public requests for project results. o Additional areas as determined by the CAM. • Conduct technology transfer activities in accordance with the Technology/Knowledge Transfer Plan. These activities will be reported in the Progress Reports. • When directed by the CAM, develop Presentation Materials for an Energy Commission- sponsored conference/workshop(s) on the project. • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the California Energy Commission. • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. • Prepare a Technology/Knowledge Transfer Report on technology transfer activities conducted during the project. • Initial Fact Sheet (draft and final) • Final Project Fact Sheet (draft and final) • Presentation Materials (draft and final) • High Quality Digital Photographs • Technology/Knowledge Transfer Plan (draft and final) • Technology/Knowledge Transfer Report (draft and final)
Intellectual Property/Work Product Ownership All data, technical information, materials first gathered, originated, developed, prepared, or obtained as a condition of this agreement and used in the performance of this agreement -- including, but not limited to all reports, surveys, plans, charts, literature, brochures, mailings, recordings (video or audio), pictures, drawings, analyses, graphic representations, software computer programs and accompanying documentation and printouts, notes and memoranda, written procedures and documents, which are prepared for or obtained specifically for this agreement, or are a result of the services required under this grant -- shall be considered "work for hire" and remain the property of the State of Vermont, regardless of the state of completion unless otherwise specified in this agreement. Such items shall be delivered to the State of Vermont upon 30- days notice by the State. With respect to software computer programs and / or source codes first developed for the State, all the work shall be considered "work for hire,” i.e., the State, not the Party (or subcontractor or sub-grantee), shall have full and complete ownership of all software computer programs, documentation and/or source codes developed. Party shall not sell or copyright a work product or item produced under this agreement without explicit permission from the State of Vermont. If Party is operating a system or application on behalf of the State of Vermont, Party shall not make information entered into the system or application available for uses by any other party than the State of Vermont, without prior authorization by the State. Nothing herein shall entitle the State to pre-existing Party’s materials. Party acknowledges and agrees that should this agreement be in support of the State's implementation of the Patient Protection and Affordable Care Act of 2010, Party is subject to the certain property rights provisions of the Code of Federal Regulations and a Grant from the Department of Health and Human Services, Centers for Medicare & Medicaid Services. Such agreement will be subject to, and incorporates here by reference, 45 CFR 74.36, 45 CFR 92.34 and 45 CFR 95.617 governing rights to intangible property.
