Common use of Human Readable Information Clause in Contracts

Human Readable Information. (HRI) markings shall be applied to ammunition, explosives containers and units loads IAW the applicable provisions of MIL-STD-129. a. At a minimum, inner container markings for CLIN 0001 shall include: National Stock Number and (DoD) Code: (see Section “B” for applicable CLIN) Item Nomenclature: (see Section “B” for applicable CLIN) Item Assembly Drawing Number: (see Section “B” for applicable CLIN) Quantity: As Applicable Lot Number: IAW MIL-STD-1168 Serial Number: Required ( x ) N/A ( ) b. At a minimum, outer container markings for CLIN 0001 shall include: National Stock Number and (DoD) Code: (see Section “B” for applicable CLIN) Item Nomenclature: (see section “B” for applicable CLIN) Item Assembly Drawing Number: (see Section “B” for applicable CLIN) Quantity: As Applicable Lot Number: IAW MIL-STD-1168 Serial Number: Required ( x) N/A ( ) Gross Weight and Cube: As Applicable DoD Contract Number: As Applicable NOTE: For IDIQ contracts, if contractor chooses to include contract number, the following format shall be used: a. N00104CK111/0003 (for older contracts) b. N00104CK111/N0010417FE001 (for newer contracts) POP Markings: (see Section “D” – Packaging & Marking paragraph 6 – below.) UN Proper Shipping Name, UN Number, Hazard Class, Compatibility Code, Net Explosive Weight, and EX Number: (see TABLE 1 below for applicable CLIN) CAA: USG DOT 'EX NUMBER' (see TABLE 1 EX NUMBER COLUMN below for applicable CLIN) Example CAA: USG DOT 880832 CLIN NUM UN PROPER SHIPPING NAME UN NUMBER HAZARD CLASS COMPA. CODE NET EXPLOSIVE EX NUMBER WT (lbs)

Human Readable Information. (HRI) markings shall be applied to ammunition, explosives containers and units loads IAW the applicable provisions of MIL-STD-129. a. At a minimum, inner container markings for CLIN 0001 shall include: National Stock Number and (DoD) Code: (see Section “B” for applicable CLIN) Item Nomenclature: (see Section “B” for applicable CLIN) Item Assembly Drawing Number: (see Section “B” for applicable CLIN) Quantity: As Applicable Lot Number: IAW MIL-STD-1168 Serial Number: Required ( x ) N/A ( ) b. At a minimum, outer container markings for CLIN 0001 shall include: National Stock Number and (DoD) Code: (see Section “B” for applicable CLIN) Item Nomenclature: (see section “B” for applicable CLIN) Item Assembly Drawing Number: (see Section “B” for applicable CLIN) Quantity: As Applicable Lot Number: IAW MIL-STD-1168 Serial Number: Required ( x) N/A ( ) Gross Weight and Cube: As Applicable DoD Contract Number: As Applicable NOTE: For IDIQ contracts, if contractor chooses to include contract number, the following format shall be used: a. N00104CK111/0003 (for older contracts) b. N00104CK111/N0010417FE001 (for newer contracts) POP Markings: (see Section “D” – Packaging & Marking paragraph 6 3 – below.) UN Proper Shipping Name, UN Number, Hazard Class, Compatibility Code, Net Explosive Weight, and EX Number: (see TABLE 1 below for applicable CLIN) CAA: USG DOT 'EX NUMBER' (see TABLE 1 EX NUMBER COLUMN below for applicable CLINCLIN ) Example CAA: USG DOT 880832 TABLE 1: United Nations Shipping / Storage Information CLIN NUM UN PROPER SHIPPING NAME UN NUMBER NUMBE R HAZARD CLASS COMPA. CODE NET EXPLOSIVE EX NUMBER WT (lbs)) EX NUMBER 0001 Rocket Motor 0186 1.3 C 2.70 1987100758

Human Readable Information. (HRI) markings shall be applied to ammunition, explosives containers and units loads IAW the applicable provisions of MIL-STD-129. a. At a minimum, inner container markings for CLIN 0001 - 0005 shall include: National Stock Number and (DoD) Code: (see Section “B” for applicable CLIN) Item Nomenclature: (see Section “B” for applicable CLIN) Item Assembly Drawing Number: (see Section “B” for applicable CLIN) Quantity: As Applicable Lot Number: IAW MIL-STD-1168 Serial Number: Required ( x ) N/A ( ) b. At a minimum, outer container markings for CLIN 0001 - 0005 shall include: National Stock Number and (DoD) Code: (see Section “B” for applicable CLIN) Item Nomenclature: (see section “B” for applicable CLIN) Item Assembly Drawing Number: (see Section “B” for applicable CLIN) Quantity: As Applicable Lot Number: IAW MIL-STD-1168 Serial Number: Required ( x) N/A ( ) Gross Weight and Cube: As Applicable DoD Contract Number: As Applicable NOTE: For IDIQ contracts, if contractor chooses to include contract number, the following format shall be used: a. N00104CK111/0003 (for older contracts) b. N00104CK111/N0010417FE001 (for newer contracts) POP Markings: (see Section “D” – Packaging & Marking paragraph 6 3 – below.) UN Proper Shipping Name, UN Number, Hazard Class, Compatibility Code, Net Explosive Weight, and EX Number: (see TABLE 1 below for applicable CLIN) CAA: USG DOT 'EX NUMBER' (see TABLE 1 EX NUMBER COLUMN below for applicable CLINCLIN ) Example CAA: USG DOT 880832 TABLE 1: United Nations Shipping / Storage Information CLIN NUM UN PROPER SHIPPING NAME UN NUMBER NUMBE R HAZARD CLASS COMPA. CODE NET EXPLOSIVE EX NUMBER WT (lbs)) EX NUMBER 0001 FUZES, 0367 1.4 S .0016 1988090904 DETONATING .0012 1988090904A .0011 1988090904B

Human Readable Information. (HRI) markings shall be applied to ammunition, explosives containers and units loads IAW the applicable provisions of MIL-STD-129. a. At a minimum, inner container markings for CLIN 0001 - 0014 shall include: National Stock Number and (DoD) Code: (see Section “B” for applicable CLIN) Item Nomenclature: (see Section “B” for applicable CLIN) Item Assembly Drawing Number: (see Section “B” for applicable CLIN) Quantity: As Applicable Lot Number: IAW MIL-STD-1168 Serial Number: Required ( x ) N/A ( ) b. At a minimum, outer container markings for CLIN 0001 - 0014 shall include: National Stock Number and (DoD) Code: (see Section “B” for applicable CLIN) Item Nomenclature: (see section “B” for applicable CLIN) Item Assembly Drawing Number: (see Section “B” for applicable CLIN) Quantity: As Applicable Lot Number: IAW MIL-STD-1168 Serial Number: Required ( x) N/A ( ) Gross Weight and Cube: As Applicable DoD Contract Number: As Applicable NOTE: For IDIQ contracts, if contractor chooses to include contract number, the following format shall be used: a. N00104CK111/0003 (for older contracts) b. N00104CK111/N0010417FE001 (for newer contracts) POP Markings: (see Section “D” – Packaging & Marking paragraph 6 3 – below.) UN Proper Shipping Name, UN Number, Hazard Class, Compatibility Code, Net Explosive Weight, and EX Number: (see TABLE 1 below for applicable CLIN) CAA: USG DOT 'EX NUMBER' (see TABLE 1 EX NUMBER COLUMN below for applicable CLINCLIN ) Example CAA: USG DOT 880832 TABLE 1: United Nations Shipping / Storage Information CLIN NUM UN PROPER SHIPPING NAME UN NUMBER NUMBE R HAZARD CLASS COMPA. CODE NET EXPLOSIVE EX NUMBER WT (lbs)) EX NUMBER 0001 Fuzes Detonating 367 1.4 S .000400 2001120273 0002 Fuzes Detonating 367 1.4 S .000420 2001120274 0003 Fuzes Detonating 367 1.4 S .000410 2001120275 0004 Fuzes Detonating 367 1.4 S .000410 2001120276 0005 Fuzes Detonating 367 1.4 S .000400 2001120277 0006 Fuzes Detonating 367 1.4 S .000450 2001120278 0007 Fuzes Detonating 367 1.4 S .000350 2001050029 0008 Cartridges, Power Devices 276 1.4 C .001000 2007080147 0009 Chargers, Shaped Flexible, Linear 0237 1.4 D 0.019460 2001120290 0010 Chargers, Shaped Flexible, Linear 0237 1.4 D 0.019460 2001120289 0011 Chargers, Shaped Flexible, Linear 0237 1.4 D 0.011920 2001120292 0012 Chargers, Shaped Flexible, Linear 0237 1.4 D 0.012400 2001120294 0013 Chargers, Shaped Flexible, Linear 0237 1.4 D 0.012400 2001120293 0014 Chargers, Shaped Flexible, Linear 0237 1.4 D 0.016150 2001120291

Human Readable Information. (HRI) markings shall be applied to ammunition, explosives containers and units loads IAW the applicable provisions of MIL-STD-129. a. At a minimum, inner container markings for CLIN 0001 - 0002 shall include: National Stock Number and (DoD) Code: (see Section “B” for applicable CLIN) Item Nomenclature: (see Section “B” for applicable CLIN) Item Assembly Drawing Number: (see Section “B” for applicable CLIN) Quantity: As Applicable Lot Number: IAW MIL-STD-1168 Serial Number: Required ( x ) N/A ( ) b. At a minimum, outer container markings for CLIN 0001 - 0002 shall include: National Stock Number and (DoD) Code: (see Section “B” for applicable CLIN) Item Nomenclature: (see section “B” for applicable CLIN) Item Assembly Drawing Number: (see Section “B” for applicable CLIN) Quantity: As Applicable Lot Number: IAW MIL-STD-1168 Serial Number: Required ( x) N/A ( ) Gross Weight and Cube: As Applicable DoD Contract Number: As Applicable NOTE: For IDIQ contracts, if contractor chooses to include contract number, the following format shall be used: a. N00104CK111/0003 (for older contracts) b. N00104CK111/N0010417FE001 (for newer contracts) POP Markings: (see Section “D” – Packaging & Marking paragraph 6 – below.) UN Proper Shipping Name, UN Number, Hazard Class, Compatibility Code, Net Explosive Weight, and EX Number: (see TABLE 1 below for applicable CLIN) CAA: USG DOT 'EX NUMBER' (see TABLE 1 EX NUMBER COLUMN below for applicable CLIN) Example CAA: USG DOT 880832 TABLE 1: United Nations Shipping / Storage Information CLIN NUM UN PROPER SHIPPING NAME UN NUMBER NUMBE R HAZARD CLASS COMPA. CODE NET EXPLOSIVE EX NUMBER WT (lbs)) EX NUMBER 0001 Articles, Explosive N.O.S. 0349 1.4 S .001100 1987100963 0002 Articles, Explosive N.O.S. 0349 1.4 S .000900 1987100964

Human Readable Information. (HRI) markings shall be applied to ammunition, explosives containers and units loads IAW the applicable provisions of MIL-STD-129. a. At a minimum, inner container markings for CLIN 0001 - 0002 shall include: National Stock Number and (DoD) Code: (see Section “B” for applicable CLIN) Item Nomenclature: (see Section “B” for applicable CLIN) Item Assembly Drawing Number: (see Section “B” for applicable CLIN) Quantity: As Applicable Lot Number: IAW MIL-STD-1168 Serial Number: Required ( x ) N/A ( ) b. At a minimum, outer container markings for CLIN 0001 - 0002 shall include: National Stock Number and (DoD) Code: (see Section “B” for applicable CLIN) Item Nomenclature: (see section “B” for applicable CLIN) Item Assembly Drawing Number: (see Section “B” for applicable CLIN) Quantity: As Applicable Lot Number: IAW MIL-STD-1168 Serial Number: Required ( x) N/A ( ) Gross Weight and Cube: As Applicable DoD Contract Number: As Applicable NOTE: For IDIQ contracts, if contractor chooses to include contract number, the following format shall be used: a. N00104CK111/0003 (for older contracts) b. N00104CK111/N0010417FE001 (for newer contracts) POP Markings: (see Section “D” – Packaging & Marking paragraph 6 3 – below.) UN Proper Shipping Name, UN Number, Hazard Class, Compatibility Code, Net Explosive Weight, and EX Number: (see TABLE 1 below for applicable CLIN) CAA: USG DOT 'EX NUMBER' (see TABLE 1 EX NUMBER COLUMN below for applicable CLINCLIN ) Example CAA: USG DOT 880832 CLIN TABLE 1: United Nations Shipping / Storage Information NSN NUM UN PROPER SHIPPING NAME UN NUMBER NUMBE R HAZARD CLASS COMPA. CODE NET EXPLOSIVE EX NUMBER WT (lbs)) EX NUMBER 1377-01- 364-4089 Cartridges, Power Device 0323 1.4 S .000420 1994090138 1377-01- NR NR NR NS .000040 2011031791 1377-01- 454-9864 Release Devices, Explosive 1.4S UN0173 PG II 0173 1.4 S .000200 1993080450B 1377-01- 590-0158 NR NR NR S .000040 2011031792

Human Readable Information. (HRI) markings shall be applied to ammunition, explosives containers and units loads IAW the applicable provisions of MIL-STD-129. a. At a minimum, inner container markings for CLIN 0001 shall include: National Stock Number and (DoD) Code: (see Section “B” for applicable CLIN) Item Nomenclature: (see Section “B” for applicable CLIN) Item Assembly Drawing Number: (see Section “B” for applicable CLIN) Quantity: As Applicable Lot Number: IAW MIL-STD-1168 Serial Number: Required ( x ) N/A ( ) b. At a minimum, outer container markings for CLIN 0001 shall include: National Stock Number and (DoD) Code: (see Section “B” for applicable CLIN) Item Nomenclature: (see section “B” for applicable CLIN) Item Assembly Drawing Number: (see Section “B” for applicable CLIN) Quantity: As Applicable Lot Number: IAW MIL-STD-1168 Serial Number: Required ( x) N/A ( ) Gross Weight and Cube: As Applicable DoD Contract Number: As Applicable NOTE: For IDIQ contracts, if contractor chooses to include contract number, the following format shall be used: a. N00104CK111/0003 (for older contracts) b. N00104CK111/N0010417FE001 (for newer contracts) POP Markings: (see Section “D” – Packaging & Marking paragraph 6 3 – below.) UN Proper Shipping Name, UN Number, Hazard Class, Compatibility Code, Net Explosive Weight, and EX Number: (see TABLE 1 below for applicable CLIN) CAA: USG DOT 'EX NUMBER' (see TABLE 1 EX NUMBER COLUMN below for applicable CLINCLIN ) Example CAA: USG DOT 880832 TABLE 1: United Nations Shipping / Storage Information CLIN NUM UN PROPER SHIPPING NAME UN NUMBER NUMBE R HAZARD CLASS COMPA. CODE NET EXPLOSIVE EX NUMBER WT (lbs)) EX NUMBER 0001 Articles, Explosive NOS 0349 1.4 S 0.0001499 1987100929 * Exception to Net Explosive Weight: Request for Variance FY17- V062.

Human Readable Information. (HRI) markings shall be applied to ammunition, explosives containers and units loads IAW the applicable provisions of MIL-STD-129. a. At a minimum, inner container markings for CLIN 0001 shall include: National Stock Number and (DoD) Code: (see Section “B” for applicable CLIN) Item Nomenclature: (see Section “B” for applicable CLIN) Item Assembly Drawing Number: (see Section “B” for applicable CLIN) Quantity: As Applicable Lot Number: IAW MIL-STD-1168 Serial Number: Required ( x ) N/A ( ) b. At a minimum, outer container markings for CLIN 0001 shall include: National Stock Number and (DoD) Code: (see Section “B” for applicable CLIN) Item Nomenclature: (see section “B” for applicable CLIN) Item Assembly Drawing Number: (see Section “B” for applicable CLIN) Quantity: As Applicable Lot Number: IAW MIL-STD-1168 Serial Number: Required ( x) N/A ( ) Gross Weight and Cube: As Applicable DoD Contract Number: As Applicable NOTE: For IDIQ contracts, if contractor chooses to include contract number, the following format shall be used: a. N00104CK111/0003 (for older contracts) b. N00104CK111/N0010417FE001 (for newer contracts) POP Markings: (see Section “D” – Packaging & Marking paragraph 6 3 – below.) UN Proper Shipping Name, UN Number, Hazard Class, Compatibility Code, Net Explosive Weight, and EX Number: (see TABLE 1 below for applicable CLIN) CAA: USG DOT 'EX NUMBER' (see TABLE 1 EX NUMBER COLUMN below for applicable CLINCLIN ) Example CAA: USG DOT 880832 TABLE 1: United Nations Shipping / Storage Information CLIN NUM UN PROPER SHIPPING NAME UN NUMBER NUMBE R HAZARD CLASS COMPA. CODE NET EXPLOSIVE EX NUMBER WT (lbs)) EX NUMBER 0001 Rocket Motor 0186 1.3 C .221150 lbs 1987100979

Human Readable Information. (HRI) markings shall be applied to ammunition, explosives containers and units loads IAW the applicable provisions of MIL-STD-129. a. At a minimum, inner container markings for CLIN 0001 shall include: National Stock Number and (DoD) Code: (see Section “B” for applicable CLIN) Item Nomenclature: (see Section “B” for applicable CLIN) Item Assembly Drawing Number: (see Section “B” for applicable CLIN) Quantity: As Applicable Lot Number: IAW MIL-STD-1168 Serial Number: Required ( x ) N/A ( ) b. At a minimum, outer container markings for CLIN 0001 shall include: National Stock Number and (DoD) Code: (see Section “B” for applicable CLIN) Item Nomenclature: (see section “B” for applicable CLIN) Item Assembly Drawing Number: (see Section “B” for applicable CLIN) Quantity: As Applicable Lot Number: IAW MIL-STD-1168 Serial Number: Required ( x) N/A ( ) Gross Weight and Cube: As Applicable DoD Contract Number: As Applicable NOTE: For IDIQ contracts, if contractor chooses to include contract number, the following format shall be used: a. N00104CK111/0003 (for older contracts) b. N00104CK111/N0010417FE001 (for newer contracts) POP Markings: (see Section “D” – Packaging & Marking paragraph 6 – below.) UN Proper Shipping Name, UN Number, Hazard Class, Compatibility Code, Net Explosive Weight, and EX Number: (see TABLE 1 below for applicable CLIN) CAA: USG DOT 'EX NUMBER' (see TABLE 1 EX NUMBER COLUMN below for applicable CLIN) Example CAA: USG DOT 880832 TABLE 1: United Nations Shipping / Storage Information CLIN NUM UN PROPER SHIPPING NAME UN NUMBER NUMBE R HAZARD CLASS COMPA. CODE NET EXPLOSIVE EX NUMBER WT (lbs)) EX NUMBER

Human Readable Information. (HRI) markings shall be applied to ammunition, explosives containers and units loads IAW the applicable provisions of MIL-STD-129. a. At a minimum, inner container markings for CLIN 0001 shall include: National Stock Number and (DoD) Code: (see Section “B” for applicable CLIN) Item Nomenclature: (see Section “B” for applicable CLIN) Item Assembly Drawing Number: (see Section “B” for applicable CLIN) Quantity: As Applicable Lot Number: IAW MIL-STD-1168 Serial Number: Required ( x ) N/A ( ) b. At a minimum, outer container markings for CLIN 0001 shall include: National Stock Number and (DoD) Code: (see Section “B” for applicable CLIN) Item Nomenclature: (see section “B” for applicable CLIN) Item Assembly Drawing Number: (see Section “B” for applicable CLIN) Quantity: As Applicable Lot Number: IAW MIL-STD-1168 Serial Number: Required ( x) N/A ( ) Gross Weight and Cube: As Applicable DoD Contract Number: As Applicable NOTE: For IDIQ contracts, if contractor chooses to include contract number, the following format shall be used: a. N00104CK111/0003 (for older contracts) b. N00104CK111/N0010417FE001 (for newer contracts) POP Markings: (see Section “D” – Packaging & Marking paragraph 6 – below.) UN Proper Shipping Name, UN Number, Hazard Class, Compatibility Code, Net Explosive Weight, and EX Number: (see TABLE 1 below for applicable CLIN) CAA: USG DOT 'EX NUMBER' (see TABLE 1 EX NUMBER COLUMN below for applicable CLIN) Example CAA: USG DOT 880832 CLIN NUM UN PROPER SHIPPING NAME UN NUMBER HAZARD CLASS COMPA. NET EX NAME NUMBE R CLASS CODE NET EXPLOSIVE EX NUMBER WT (lbs)) NUMBER 0001 Rocket Motor 0186 1.3 C 2.70 1987100758