INTENTS AND PURPOSES Sample Clauses

INTENTS AND PURPOSES. 1. This Agreement is for the joint use and benefit of the contracting parties, and the provisions herein defined and set forth shall be construed as binding upon and effective in determining the relations between the parties and/or subordinate sub-divisions thereof signing hereto: and to set forth herein the basic Agreement covering the rates of pay, hours of work, and conditions of employment to be observed by the parties hereto. It is mutually understood that the following terms and conditions relating to the employment of workers covered by this Agreement have been decided upon by means of collective bargaining and that the following provisions will be binding upon the Contractor and the Unions during the terms of this Agreement and any renewal thereafter. It is further agreed that the employees working under this Agreement shall constitute a bargaining unit separate and distinct from all others. This Agreement covers all terms and conditions of employment for work being performed hereunder, except for all work that may be performed under the NTD Articles of Agreement; the National Stack/ Chimney Agreement; the National Cooling Tower Agreement; the National Refractory Agreement; the National Agreement of the International Union of Elevator Constructors; the UA National Specialty Agreement for the United States of America (as it applies to welding); the IBB National Specialty Agreement for the United States of America (as it applies to welding); or any other such National Agreement approved for use by the parties. However, all instrument calibration work and loop checking shall be performed under the terms of the UA/IBEW Joint National Industrial Agreement for Instrument and Control Systems Technicians. The procedures regarding work stoppages and lockouts of the GPPMA shall apply to all work performed under the above referenced agreements. Contractors signed to the General Presidents’ Project Maintenance Agreement, which is a national agreement, are not required to become signatory to a local collective bargaining agreement. This Agreement may be modified by mutual consent in writing by the parties signatory hereto. 2. Amendments to this Agreement, for a specific project or projects, which are required to make a contractor competitive, may be added by vote of the General Presidents’ Committee. When approved by the General Presidents’ Committee, the Amendment shall be considered a part of the General Presidents’ Project Maintenance Agreement for that spec...
Sample 1Sample 2Sample 3See All (7)
AutoNDA by SimpleDocs
INTENTS AND PURPOSES. 1. This Agreement is for the joint use and benefit of the contracting parties, and the provisions herein defined and set forth shall be construed as binding upon and effective in determining the relations between the parties and to set forth herein the basic Agreement covering the rates of pay, hours of work, and conditions of employment to be observed by the parties hereto. It is mutually understood that the following terms and conditions relating to the employment of workers covered by this Agreement have been decided upon by means of collective bargaining and that the following provisions will be binding upon the Contractor, the Unions and the affiliates of the Unions, including but not limited to their Local Unions, during the term of this Agreement and any renewal thereafter. It is further agreed that the employees working under this Agreement shall constitute a bargaining unit separate and distinct from all others. This Agreement covers all terms and conditions of employment for work being performed hereunder. Contractors signatory to an LOA are not required to become signatory to a local collective bargaining agreement. This Agreement may be modified by mutual consent in writing by the parties hereto. 2. Amendments to this Agreement, for a project or projects, which are required to make a contractor competitive, may be added by majority vote of the General Presidents’ Committee on Contract Maintenance (sometimes referred to herein as the “General Presidents’ Committee”). When approved by the General Presidents’ Committee, the Amendment shall be considered a part of this Agreement for that specific project.
Sample 1Sample 2Sample 3
INTENTS AND PURPOSES. This Pantex Trades Agreement, hereinafter is referred as the "Agreement" is for the joint use and benefit of the contracting parties, and the provisions herein defined and set forth shall be construed as binding upon and effective in determining the relations between the parties and/or subordinate sub-divisions hereof signing hereto; and to set forth herein the basic Agreement covering the rates of pay, hours of work and conditions of employment to be observed by the parties hereto. It is mutually understood that the following terms and conditions relating to the employment of workers covered by this Agreement have been decided upon by means of collective bargaining and that the following provisions will be binding upon the Company and the Unions during the term of this Agreement and any renewal thereafter. It is further agreed that the Direct Hires working under this Agreement shall constitute a bargaining unit separate and distinct from all others. This Agreement may be modified by mutual consent in writing by the parties' signatory hereto.
Sample 1
INTENTS AND PURPOSES. ‌ 1. This Agreement is for the joint use and benefit of the contracting parties, and the provisions herein defined and set forth shall be construed as binding upon and effective in determining the relations between the parties and/or subordinate subdivisions thereof signing hereto, and to set forth herein the basic Agreement covering the rates of pay, hours of work, and conditions of employment to be observed by the parties hereto. 2. It is mutually understood that the following terms and conditions relating to the employment of workers covered by this Agreement have been decided upon by means of collective bargaining and that the following provisions will be binding upon the Contractor and the Unions during the term of this Agreement and any renewal thereafter. It is further agreed that the employees working under this Agreement shall constitute a bargaining unit separate and distinct from all others. This Agreement may be modified by mutual consent, in writing, of the Signatory Contractors and North America’s Building Trades Unions (NABTU), in consultation with the Co-Chairs of the LMCCs, subject to the policies and criteria established pursuant to this Agreement. 3. Any craft not party to this Agreement will not receive any benefits or conditions other than those outlined in this Agreement. The trades party hereto agree that they will not support in any manner, pressure, or request the Employer to use unsigned crafts on the job and will perform the work of that craft if requested to do so by the Employer. The Owner has the right to contract the work of an unsigned Union, utilizing Contractor and employees of his choice.
Sample 1
INTENTS AND PURPOSES. ‌ 1.1. This Agreement is for the joint use and benefit of the parties. The various provisions herein defined and set forth shall be construed as binding upon and effective in determining the relations between the parties and/ or subordinate subdivisions thereof. This Agreement sets forth herein the parties’ joint agreements covering wages and benefits, classifications, hours of work, areas of scope coverage, and all other terms and conditions of employment to be observed by the parties. This Agreement is executed to promote maximum work and job opportunities for the parties. 1.2. It is mutually understood that this Agreement represents all proposals brought forth in negotiations and that the following terms and conditions relating to the employment of craft labor covered by this Agreement have been decided upon by means of collective bargaining. It is also understood that the following provisions will be binding upon the Contractor and the Unions during the term of this Agreement and any renewal thereafter. It is further agreed that the employees working under this Agreement shall constitute a bargaining unit separate and distinct from all others. This Agreement may be modified in writing by mutual consent of the Signatory Contractors and North America’s Building Trades Unions (NABTU), in consultation with the Co- Chairs of the Labor Management Cooperation Committees (LMCCs), subject to the policies and criteria established pursuant to this Agreement.
Sample 1
INTENTS AND PURPOSES. This Agreement is for the joint use and benefit of the contracting parties, and the provisions herein defined and set forth shall be construed as bind- ing upon and effective in determining the relations between the parties and/or subordinate subdivisions thereof signing hereto and to set forth herein the basic Agreement covering the rates of pay, hours of work, and conditions of employment to be observed by the parties hereto. It is agreed that the Contractor shall sign, accept, and be bound by the terms and conditions of this Project Agreement. It is further agreed that the terms and conditions of this Project Agreement shall supersede and over- ride terms and conditions of any and all other national, area, or local col- lective bargaining agreements and that the Contractor will not be obligated to sign any other local, area, or national agreement. Each covered Contractor shall also ensure that its Subcontractors become signatory to and be required to follow the provisions of this Agreement while performing work on the project site, unless the onsite work is incidental to the overall work of the subordinate contracts. This shall not apply to Sub- contractors performing specialty work or to Subcontractors whose contracts are for $100,000 or less. Under no circumstances will multiple applications of subcontracts be used to circumvent the basic intent of this Agreement. It is mutually understood that the following terms and conditions relating to the employment of workers covered by this Agreement have been decided upon by means of collective bargaining and that the following provisions will be binding upon the Contractor and the Council Unions during the term of this Agreement and any renewal thereafter. It is further agreed that the em- ployees working under this Agreement shall constitute a bargaining unit separate and distinct from all others.
Sample 1
INTENTS AND PURPOSES. 1. This Agreement is for the joint use and benefit of the contracting parties, and the provisions herein defined and set forth shall be construed as binding upon and effective in determining the relations between the parties and/or subordinate sub-divisions thereof signing hereto: and to set forth herein the basic Agreement covering the rates of pay, hours of work, and conditions of employment to be observed by the parties hereto. It is mutually understood that the following terms and conditions relating to the employment of workers covered by this Agreement have been decided upon by means of collective bargaining and that the following provisions will be binding upon the Contractor and the Unions during the terms of this Agreement and any renewal thereafter. It is further agreed that the employees working under this Agreement shall constitute a bargaining unit separate and distinct from all others. This Agreement covers all terms and conditions of employment for work being performed hereunder. Contractors signed to the General Presidents’ Ship Maintenance Agreement (GPSMA), which is a national agreement, are not required to become signatory to a local collective bargaining agreement. This Agreement may be modified by mutual consent in writing by the parties signatory hereto. 2. Amendments to this Agreement, for a specific project or projects, which are required to make a contractor competitive, may be added by vote of the General Presidents’ Committee. When approved by the General Presidents’ Committee, the Amendment shall be considered a part of the GPSMA for that specific project.
Sample 1
AutoNDA by SimpleDocs
INTENTS AND PURPOSES. 1. This Special Project Agreement is for the joint use and 2. It is mutually understood that the following terms and
Sample 1
INTENTS AND PURPOSES. This Agreement is for the joint use and benefit of the contracting parties, and the provisions herein defined and set forth shall be construed as binding upon and effective in determining the relations between the parties and/or subordinate subdivision thereof signing hereto, and to set forth herein the basic Agreement covering the rates of pay, hours of work, and conditions of employment to be observed by the parties hereto. It is mutually understood that the following terms and conditions relating to the employment of workmen covered by this Agreement have been decided upon by means of collective bargaining and that the following provisions will be binding upon the Company the Unions during the term of this Agreement and any renewal thereafter. It is further agreed that the employees working under Agreement shall constitute a bargaining unit separate and distinct from all others. This Agreement may be modified by mutual consent and in writing by the parties signatory hereto.
Sample 1

Related to INTENTS AND PURPOSES

  • INTENT AND PURPOSE The Employer and the Union each represent that the purpose and the intent of this Agreement is to promote cooperation and harmony, to recognize mutual interests, to provide a channel through which information and problems may be transmitted from one to the other, to formulate rules to govern the relationship between the Union and the Employer, to promote efficiency and service, and to set forth herein the basic agreements covering rates of pay, hours of work, and conditions of employment.

  • Formation and Purpose Promptly following the Effective Date, the Parties shall confer and then create the JSC and the IPC, and, optionally, create one or more of the other Committees listed in the chart below. Each Committee shall have the purpose indicated in the chart. To the extent that after conferring both Parties agree to not create a Committee (other than the JSC and the IPC), the creation of such Committee shall be deferred until one Party informs the other Party of its then desire to create the so-deferred Committee, at which point the Parties will thereafter promptly create the so-deferred Committee. Joint Steering Committee (“JSC”) Establish projects for the Bacteriophage Program and establish the priorities, as well as approve budgets for such projects. Approve all subcommittee projects and plans (except for decisions of the IPC). The JSC shall establish budgets not less than on a quarterly basis. Chemistry, Manufacturing and Controls Committee (“CMCC”) Establish project plans and review and approve activities and budgets for chemistry, manufacturing, and controls under the Bacteriophage Program. Regulatory Committee (“RC”) Review and approve all research and development plans and projects, including clinical projects, associated with any necessary regulatory approvals, all associated publications, and all regulatory filings and correspondence relating to gaining regulatory approval for new Ampliphi Products under the Bacteriophage Program; and review and approve itemized budgets with respect to the foregoing. Commercialization Committee (“CC”) Establish project plans and review and approve activities and budgets for Commercialization activities under the Bacteriophage Program. Portions herein identified by [*****] have been omitted pursuant to a request for confidential treatment under Rule 24b-2 of the Securities Exchange Act of 1934, as amended. A complete copy of this document has been filed separately with the Securities and Exchange Commission. Intellectual Property Committee (“IPC”) Evaluate all intellectual property issues in connection with the Bacteriophage Program; review and approve itemized budgets with respect to the foregoing.

  • Parties and Purpose This agreement (the “Agreement”) is entered by and between certain portfolios and classes thereof, specified below and in Schedule C, of Franklin Xxxxxxxxx Variable Insurance Products Trust, an open-end management investment company organized as a statutory trust under Delaware law (the “Trust”), Franklin/Xxxxxxxxx Distributors, Inc., a California corporation which is the principal underwriter for the Trust (the “Underwriter,” and together with the Trust, “we” or “us”), the insurance company identified on Schedule A (together “you”) and your distributor, on your own behalf and on behalf of each segregated asset account maintained by you that is listed on Schedule B, as that schedule may be amended from time to time (“Account” or “Accounts”). The purpose of this Agreement is to entitle you, on behalf of the Accounts, to purchase the shares, and classes of shares, of portfolios of the Trust (“Portfolios”) that are identified on Schedule C, consistent with the terms of the prospectuses of the Portfolios, solely for the purpose of funding benefits of your variable life insurance policies or variable annuity contracts (“Contracts”) that are identified on Schedule D. This Agreement does not authorize any other purchases or redemptions of shares of the Trust.

  • Introduction and Purpose Introduction • Neighbourhood Development Plans • Neighbourhood Development Orders

  • Scope and Purpose 1.01 This document is intended to set out general guidelines and principles regarding child welfare sector integrations during the term of this agreement which are mandated by the Ministry and for which local Human Resources Adjustment Plans (HRAP) are required to be negotiated. Subject to the following terms, these principles will serve as the framework for the treatment of bargaining unit employees and will apply to subsequent negotiations with unions, as may be required, as part of an integration arising within the context of the Ontario Labour Relations Act (OLRA) or PSLRTA, whichever is applicable. 1.02 Employees who may be impacted by an integration are valued and are to be treated fairly and respectfully. The parties agree that they will make reasonable efforts to reduce any negative affect on employees as a result of an integration in accordance with the following.

  • Intention of the Parties Definitions 1.1 Intention of the Parties (a) This Agreement sets out the terms on which Bank will be providing custodial, settlement and other associated services to the Customer. Bank will be responsible for the performance of only those duties set forth in this Agreement. (b) Investing in Financial Assets and cash in foreign jurisdictions may involve risks of loss or other special features. The Customer acknowledges that Bank is not providing any legal, tax or investment advice in providing the services under this Agreement and will not be liable for any losses resulting from Country Risk.

  • Background and Purpose Executive was employed by the Company. Executive's employment is ending effective __________ under the conditions described in Section 3.1 of the Executive Change of Control Agreement ("Agreement") by and between Executive and the Company dated _____________, 2012. The purpose of this Release is to settle, and the parties hereby settle, fully and finally, any and all claims the Releasing Parties may have against the Released Parties, whether asserted or not, known or unknown, including, but not limited to, claims arising out of or related to Executive's employment, any claim for reemployment, or any other claims whether asserted or not, known or unknown, past or future, that relate to Executive's employment, reemployment, or application for reemployment.

  • NOW THEREFORE THE PARTIES AGREE AS FOLLOWS The employee is paid 100% of their earnings during the working period.

  • NOW THIS AGREEMENT WITNESSETH AS FOLLOWS In this Agreement words and expressions shall have the same meanings as are respectively assigned to them in the Conditions of Contract referred to.

  • Purposes The Company was formed for the object and purpose of, and the nature of the business to be conducted by the Company is, engaging in any lawful act or activity for which limited liability companies may be formed under the Act.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!