Interconnection to Others Sample Clauses

Interconnection to Others. 11.7.1 Within a contiguous area within the eligible structure, the AT&T-13STATE will permit Collocators to construct their own direct connection (cross-connect) facilities to other physical Collocators using copper or optical facilities between collocated equipment located within the same Eligible Structure, subject only to the same reasonable safety requirements that AT&T-13STATE imposes on its own equipment. AT&T-13STATE shall not require physical-to-physical Collocators to purchase any equipment or cross-connect capabilities solely from AT&T-13STATE. If requested by the Collocator, AT&T-13STATE will provide only the installation of physical structure(s) and the associated labor necessary for the Collocator(s) to pull its facilities from its equipment space to the equipment space of another Collocator. However if the Collocators cannot physically pull the cable themselves (i.e. located on different floors), AT&T-13STATE will perform the necessary construction on a standard Custom Work Order basis and perform the cable pull. AT&T-13STATE (1) will not make any physical connection within the Collocator’s dedicated space; (2) will not have any liability for the cable or the connections, or the traffic carried thereon; and (3) will not maintain any records concerning these connections. 11.7.2 If a physical Collocator and a virtual Collocator both have purchased dedicated appearances not then in use on a DSX-1 panel, DSX-3 panel, or FDF located within contiguous areas within the eligible structure, then AT&T-13STATE will permit the interconnection of physically and virtually collocated equipment by connection of copper or optical facilities to the Collocators’ dedicated appearances on the DSX-1 panel, DSX-3 panel, or FDF, subject only to the same reasonable safety requirements that AT&T-13STATE imposes on its own equipment. The connections shall be made within ten (10) days of a joint request by the Collocators. At AT&T-13STATE’s option, the connection may be made either by AT&T-13STATE or by the Collocators’ installers, who shall be on the list of approved installation vendors.
Sample 1Sample 2Sample 3See All (12)
AutoNDA by SimpleDocs
Interconnection to Others. The Interconnector may directly connect to -------------------------- other Interconnectors' facilities within the Physical Collocation Site. USWC agrees to provide to Interconnector, upon its receipt of the Interconnector's written request, any facilities necessary for such interconnection wherever such facilities exist or can be made available and USWC shall provide any such facilities pursuant to 4.3 preceding and Exhibits A and B. Further, USWC agrees to provide to the Interconnector, upon its receipt of the Interconnector's written request, unbundled network transmission elements at rates specified in Exhibits A and B, and USWC will facilitate interconnection of the Interconnector's collocation equipment to other services offered in USWC's tariffs or other Agreements (e.g.,
Sample 1

Related to Interconnection to Others

  • Interconnection 2.1 This section applies to linking with suppliers providing public telecommunications transport networks or services in order to allow the users of one supplier to communicate with users of another supplier and to access services provided by another supplier, where specific commitments are undertaken.

  • Electrical connections Equipment requiring electrical connections for operation shall either be hard wired to the Authorized User's provided connections or the Contractor shall be responsible for a male electrical union. All connections shall be made by the Contractor and accomplished in accordance with National Electrical Code requirements. Electrically operated equipment shall be available in the following volts and phases: 208 volt 1 or 3 phase, 60 HZ 220 volt 1 or 3 phase, 60 HZ 440 volt 1 or 3 phase, 60 HZ

  • Interconnection Service Interconnection Service allows the Interconnection Customer to connect the Large Generating Facility to the Participating TO’s Transmission System and be eligible to deliver the Large Generating Facility’s output using the available capacity of the CAISO Controlled Grid. To the extent the Interconnection Customer wants to receive Interconnection Service, the Participating TO shall construct facilities identified in Appendices A and C that the Participating TO is responsible to construct.

  • Network Interconnection Architecture Each Party will plan, design, construct and maintain the facilities within their respective systems as are necessary and proper for the provision of traffic covered by this Agreement. These facilities include but are not limited to, a sufficient number of trunks to the point of interconnection with the tandem company, and sufficient interoffice and interexchange facilities and trunks between its own central offices to adequately handle traffic between all central offices within the service areas at a P.01 grade of service or better. The provisioning and engineering of such services and facilities will comply with generally accepted industry methods and practices, and will observe the rules and regulations of the lawfully established tariffs applicable to the services provided.

  • NETWORK INTERCONNECTION METHODS 3.1 The Interconnection provided herein may not be used solely for the purpose of originating a Party’s own interexchange traffic.

  • Interconnection Customer’s Interconnection Facilities The Interconnection Customer shall design, procure, construct, install, own and/or control the Interconnection Customer’s Interconnection Facilities described in Appendix A at its sole expense.

  • Interconnection Facilities 4.1.1 The Interconnection Customer shall pay for the cost of the Interconnection Facilities itemized in Attachment 2 of this Agreement. The NYISO, in consultation with the Connecting Transmission Owner, shall provide a best estimate cost, including overheads, for the purchase and construction of its Interconnection Facilities and provide a detailed itemization of such costs. Costs associated with Interconnection Facilities may be shared with other entities that may benefit from such facilities by agreement of the Interconnection Customer, such other entities, the NYISO, and the Connecting Transmission Owner. 4.1.2 The Interconnection Customer shall be responsible for its share of all reasonable expenses, including overheads, associated with (1) owning, operating, maintaining, repairing, and replacing its own Interconnection Facilities, and

  • Interconnection Customer Provided Services The services provided by Interconnection Customer under this LGIA are set forth in Article 9.6 and Article 13.5. 1. Interconnection Customer shall be paid for such services in accordance with Article 11.6.

  • Interconnection Customer (1) Interconnection Customer shall construct and, unless otherwise indicated, shall own, the following Interconnection Facilities: None (2) In the event that, in accordance with the Interconnection Construction Service Agreement, Interconnection Customer has exercised the Option to Build, it is hereby permitted to build in accordance with and subject to the conditions and limitations set forth in that Section, the following portions of the Transmission Owner Interconnection Facilities which constitute or are part of the Customer Facility: None Ownership of the facilities built by Interconnection Customer pursuant to the Option to Build shall be as provided in the Interconnection Construction Service Agreement.

  • Interconnection Agreement Seller shall comply with the terms and conditions of the Interconnection Agreement.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!