Inversion Contexts. Another interesting commentary on the analysis set forward here is the presence of complementizer agreement in certain inversion contexts, as shown in (91) (Xxx Xxxxx and Xxxxxxx Xxxxxx, p.c.).
Inversion Contexts Sample Clauses
Related to Inversion Contexts
200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, glass, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
Conversion of Multiple Notes by a Single Holder If a Holder converts more than one (1) Note on a single Conversion Date, then the Conversion Consideration due in respect of such conversion will (in the case of any Global Note, to the extent permitted by, and practicable under, the Depositary Procedures) be computed based on the total principal amount of Notes converted on such Conversion Date by such Holder.
DOMESTIC PREFERENCES FOR PROCUREMENTS To the extent applicable, Supplier certifies that during the term of this Contract will comply with applicable requirements of 2 C.F.R. § 200.322.
Conversion/Continuation (a) Subject to Section 2.17 and so long as no Default or Event of Default shall have occurred and then be continuing, Lead Borrower shall have the option: (i) to convert at any time all or any part of any Term Loan equal to $5,000,000 and integral multiples of $1,000,000 in excess of that amount from one Type of Loan to another Type of Loan; provided, that a LIBOR Rate Loan may only be converted on the expiration of the Interest Period applicable to such LIBOR Rate Loan unless the Loan Parties pay all amounts due under Section 2.17 in connection with any such conversion, or (ii) upon the expiration of any Interest Period applicable to any LIBOR Rate Loan, to continue all or any portion of such Loan equal to $5,000,000 and integral multiples of $1,000,000 in excess of that amount as a LIBOR Rate Loan. (b) Lead Borrower shall deliver a Conversion/Continuation Notice to Administrative Agent no later than noon (New York time) at least two Business Days in advance of the proposed conversion date (in the case of a conversion to a Base Rate Loan) and at least three (3) Business Days in advance of the proposed conversion/continuation date (in the case of a conversion to, or a continuation of, a LIBOR Rate Loan). Except as otherwise provided herein, a Conversion/Continuation Notice for conversion to, or continuation of, any LIBOR Rate Loans (or telephonic notice in lieu thereof) shall be irrevocable on and after the related Interest Rate Determination Date, and Lead Borrower shall be bound to effect a conversion or continuation in accordance therewith.
Margin of Preference and Reservations 32.1 A margin of preference may be allowed on locally manufactured goods only when the contract is open to international tendering, where the tender is likely to attract foreign goods and where the contract exceeds the threshold specified in the Regulations. 32.2 For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity shall not subject the items listed below to international tender and hence no margin of preference shall be allowed. The affected items are: a) motor vehicles, plant and equipment which are assembled in Kenya; b) furniture, textile, foodstuffs, oil and gas, information communication technology, steel, cement, leather agro-processing, sanitary products, and other goods made in Kenya; or c) goods manufactured, mined, extracted or grown in Kenya. 32.3 A margin of preference shall not be allowed unless it is specified so in the TDS.
Conversion to Single Currency 31.1 For evaluation and comparison purposes, the currency(ies) of the Tender shall be converted in a single currency as specified in the TDS.
CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
Preference Issues If any Senior Secured Party is required in any Insolvency or Liquidation Proceeding or otherwise to disgorge, turn over or otherwise pay any amount to the estate of the Company or any other Grantor (or any trustee, receiver or similar Person therefor), because the payment of such amount was declared to be fraudulent or preferential in any respect or for any other reason, any amount (a “Recovery”), whether received as proceeds of security, enforcement of any right of setoff or otherwise, then the Senior Obligations shall be reinstated to the extent of such Recovery and deemed to be outstanding as if such payment had not occurred and the Senior Secured Parties shall be entitled to the benefits of this Agreement until a Discharge of Senior Obligations with respect to all such recovered amounts. If this Agreement shall have been terminated prior to such Recovery, this Agreement shall be reinstated in full force and effect, and such prior termination shall not diminish, release, discharge, impair or otherwise affect the obligations of the parties hereto. Each Second Priority Representative, for itself and on behalf of each Second Priority Debt Party under its Second Priority Debt Facility, hereby agrees that none of them shall be entitled to benefit from any avoidance action affecting or otherwise relating to any distribution or allocation made in accordance with this Agreement, whether by preference or otherwise, it being understood and agreed that the benefit of such avoidance action otherwise allocable to them shall instead be allocated and turned over for application in accordance with the priorities set forth in this Agreement.
When Securities Presented for Repayment Become Due and Payable If Securities of any series providing for repayment at the option of the Holders thereof shall have been surrendered as provided in this Article Thirteen and as provided by or pursuant to the terms of such Securities, such Securities or the portions thereof, as the case may be, to be repaid shall become due and payable and shall be paid by the Company on the Repayment Date therein specified, and on and after such Repayment Date (unless the Company shall default in the payment of such Securities on such Repayment Date) such Securities shall, if the same were interest- bearing, cease to bear interest and the coupons for such interest appertaining to any Bearer Securities so to be repaid, except to the extent provided below, shall be void. Upon surrender of any such Security for repayment in accordance with such provisions, together with all coupons, if any, appertaining thereto maturing after the Repayment Date, the principal amount of such Security so to be repaid shall be paid by the Company, together with accrued interest (if any) to the Repayment Date; provided, however, that coupons whose Stated Maturity is on or prior to the Repayment Date shall be payable only at an office or agency located outside the United States (except as otherwise provided in Section 10.02) and, unless otherwise specified pursuant to Section 3.01, only upon presentation and surrender of such coupons; provided further that, in the case of Registered Securities, installments of interest (if any) whose Stated Maturity is on or prior to the Repayment Date shall be payable to the Holders of such Securities, or one or more Predecessor Securities, registered as such at the close of business on the relevant Record Dates according to their terms and the provisions of Section 3.07. If any Bearer Security surrendered for repayment shall not be accompanied by all appurtenant coupons maturing after the Repayment Date, such Security may be paid after deducting from the amount payable therefor as provided in Section 13.02 an amount equal to the face amount of all such missing coupons, or the surrender of such missing coupon or coupons may be waived by the Company and the Trustees if there be furnished to them such security or indemnity as they may require to save each of them and any Paying Agent harmless. If thereafter the Holder of such Security shall surrender to the Trustees or any Paying Agent any such missing coupon in respect of which a deduction shall have been made as provided in the preceding sentence, such Holder shall be entitled to receive the amount so deducted; provided, however, that interest represented by coupons shall be payable only at an office or agency located outside the United States (except as otherwise provided in Section 10.02) and, unless otherwise specified as contemplated by Section 3.01, only upon presentation and surrender of those coupons. If any Security surrendered for repayment shall not be so repaid upon surrender thereof for repayment, the principal amount and premium (if any) shall, until paid, bear interest from the Repayment Date at the rate of interest or Yield to Maturity (in the case of Original Issue Discount Securities) set forth in such Security.
Warrant Exchangeable for Different Denominations This Warrant is exchangeable, upon the surrender hereof by the holder hereof at the office or agency of the Company referred to in Paragraph 7(e) below, for new Warrants of like tenor representing in the aggregate the right to purchase the number of shares of Common Stock which may be purchased hereunder, each of such new Warrants to represent the right to purchase such number of shares as shall be designated by the holder hereof at the time of such surrender.
