Items for Which JUMPCO Sample Clauses

Items for Which JUMPCO is Not Liable The following replaces Items 10.2b and 10.2c:
Sample 1
AutoNDA by SimpleDocs

Related to Items for Which JUMPCO

  • Items for Which IBM May Be Liable The following replaces the first sentence: Circumstances may arise where, because of a default by IBM in the performance of its obligations under this Agreement or other liability, Customer is entitled to recover damages from IBM. In the second sentence of the first paragraph, delete entirely the parenthetical phrase “(including fundamental breach, negligence, misrepresentation, or other contract or tort claim).”

  • What Are the Qualifications for Charitable Donations The Pension Protection Act of 2006 allows Xxxx XXX holders who are RMD age or older at the time of a distribution to annually exclude qualified charitable distribution amounts up to $100,000 per year from gross income. The provision was made permanent by the PATH Act of 2015. A qualified charitable distribution must be made payable directly to the qualified charity as described in Section 170(b) of the Internal Revenue Code. Distributions from SEP or SIMPLE IRAs do not qualify for this type of designation.

  • CAUTIONS FOR GLOBAL USE AND EXPORT AND IMPORT COMPLIANCE Due to the global nature of the internet, through the use of our network you hereby agree to comply with all local rules relating to online conduct and that which is considered acceptable Content. Uploading, posting and/or transferring of software, technology and other technical data may be subject to the export and import laws of the United States and possibly other countries. Through the use of our network, you thus agree to comply with all applicable export and import laws, statutes and regulations, including, but not limited to, the Export Administration Regulations (xxxx://xxx.xxxxxx.xxx.xxx/bis/ear/ear_data.html), as well as the sanctions control program of the United States (xxxx://xxx.xxxxxxxx.xxx/resource- center/sanctions/Programs/Pages/Programs.aspx). Furthermore, you state and pledge that you:

  • Items for Which Lenovo May Be Liable Circumstances may arise where, because of a default on Lenovo’s part or other liability, Licensee is entitled to recover damages from Lenovo. Regardless of the basis on which Licensee is entitled to claim damages from Lenovo (including fundamental breach, negligence, misrepresentation, or other contract or tort claim), Lenovo’s entire liability for all claims in the aggregate arising from or related to each Program or otherwise arising under this Agreement will not exceed the amount of any 1) damages for bodily injury (including death) and damage to real property and tangible personal property and 2) other actual direct damages up to the charges (if the Program is subject to fixed term charges, up to twelve months‘ charges) Licensee paid for the Program that is the subject of the claim. This limit also applies to any of Lenovo’s Program developers and suppliers. It is the maximum for which Lenovo and its Program developers and suppliers are collectively responsible.

  • Conditions for International Processing SAP shall be entitled to process Personal Data, including by using Subprocessors, in accordance with this DPA outside the country in which the Customer is located as permitted under Data Protection Law.

  • Required Qualifications for Surety The Contract provides that the surety and insurance companies must be acceptable to the Owner. Only those sureties listed in the Department of Treasury’s Listing of Approved Sureties (Department Circular 570) are acceptable to the Owner. All bonds at the time of issuance must be issued by a company authorized by the Insurance Commissioner to transact the business of suretyship in the State of Georgia, and shall have a Best Policyholders Rating of "A-" or better and with a financial size rating of Class V or larger.

  • Public Contracts for Services [Not applicable to agreements relating to the offer, issuance, or sale of securities, investment advisory services or fund management services, sponsored projects, intergovernmental agreements, or information technology services or products and services] Contractor certifies, warrants, and agrees that it does not knowingly employ or contract with a worker without authorization who will perform work under this Agreement and will confirm the employment eligibility of all employees who are newly hired for employment in the United States to perform work under this Agreement, through participation in the E-Verify Program or the Department program established pursuant to C.R.S. §8-17.5-102(5)(c). Contractor shall not knowingly employ or contract with a worker without authorization to perform work under this Agreement or enter into a contract with a subcontractor that fails to certify to Contractor that the subcontractor shall not knowingly employ or contract with a worker without authorization to perform work under this Agreement. Contractor (a) shall not use E-Verify Program or Department program procedures to undertake pre-employment screening of job applicants while this Agreement is being performed, (b) shall notify the subcontractor and County within three days if Contractor has actual knowledge that a subcontractor is employing or contracting with a worker without authorization for work under this Agreement, (c) shall terminate the subcontract if a subcontractor does not stop employing or contracting with the worker without authorization within three days of receiving the notice, and (d) shall comply with reasonable requests made in the course of an investigation, undertaken pursuant to C.R.S. §8-17.5-102(5), by the Colorado Department of Labor and Employment. If Contractor participates in the Department program, Contractor shall deliver to County a written, notarized affirmation, affirming that Contractor has examined the legal work status of such employee, and shall comply with all of the other requirements of the Department program. If Contractor fails to comply with any requirement of this provision or C.R.S. §8-17.5-102 et seq., County may terminate this Agreement for breach and, if so terminated, Contractor shall be liable for damages.

  • Please see the current Washtenaw Community College catalog for up-to-date program requirements Secondary / Post-Secondary Program Alignment Welding HIGH SCHOOL COURSE SEQUENCE 9th Grade 10th Grade 11th Grade 12th Grade English 9 Algebra I World History/Geography Biology World Language Phys Ed/Health English 10 Geometry U.S. History/Geography Physics or Chemistry World Language Visual/Performing/Applied Arts English 11 Algebra II Civics/Economics Welding English 12 Math Credit Science Credit Welding WASHTENAW COMMUNITY COLLEGE Welding Associate in Applied Science Semester 1 Math Elective(s)* 3 WAF 105 Introduction to Welding Processes 2 WAF 111 Oxy-fuel Welding 4 WAF 112 Shielded Metal Arc Welding 4 Semester Total 13 Semester 2 Speech Elective(s) 3 WAF 106 Blueprint Reading for Welders 3 WAF 123 Advanced Oxy-fuel Welding 4 WAF 124 Advanced Shielded Metal Arc Welding 4 Semester Total 14 Semester 3 Arts/Human. Elective(s) 3 Computer Lit. Elective(s) 3 WAF 215 Advanced Gas Tungsten Arc Welding 4 WAF 288 Gas Metal Arc Welding 4 Semester Total 14 Semester 4 WAF 200 Layout Theory Welding 3 WAF 210 Welding Metallurgy 3 Soc. Sci. Elective(s) 3 WAF 226 Specialized Welding Procedures 4 Semester Total 13 Semester 5 Nat. Sci. Elective(s) 4 WAF 227 Basic Fabrication 3 WAF 229 Shape Cutting Operations 3 Writing Elective(s) 3 Semester Total 13 Program Totals 67

  • Audits by The District and Correction of Accounts During the term of this Agreement and for a period of six (6) years following the termination of this Agreement, the District may begin an audit of Contractor’s provision of goods and/or services under this Agreement. Contractor agrees to retain and make available for inspection all of its records pertaining to its performance of this Agreement, including billing records and any banking records that may reflect proceeds from any transactions with the District, during the term of this Agreement and for at least six (6) years following the termination of this Agreement. If Contractor receives notice that The District is auditing its performance under this Agreement or litigation results from this Agreement, then Contractor agrees to retain and make available for inspection all of its records pertaining to its performance of this Agreement, including billing records and any banking records that may reflect proceeds from any transactions with the District, for an additional three (3) years following the conclusion of the audit or the entry of a final judgment in any such litigation and the final resolution of any possible appeals of a final judgment in any such litigation. If the District determines as result of its audit, that Contractor has failed to satisfy the invoicing or documentation requirements of this Agreement, has improperly billed the District for goods and/or services that were not actually provided, or has overcharged the District for goods and/or services that were actually provided by Contractor, then Contractor shall repay the District, without interest, for any improper payments or overpayments made by the District to Contractor within thirty (30) days of a written demand by the District. If Contractor fails to repay the District for any improper payments or overpayments within thirty (30) days of the District’s written demand, then Contractor will owe the District interest accrued daily at the rate of 7.0% per annum from the date of the District’s written demand until the improper payment and/or overpayment is repaid in full by Contractor. Conversely, if an audit initiated by the District reveals that the District owes additional compensation to Contractor pursuant to the terms of this Agreement, then the District will pay the additional compensation to Contractor, without interest, within thirty (30) days of the completion of its audit. If the District fails to pay Contractor for any additional compensation owed under this Agreement within thirty (30) days after completion of its audit, then the District will pay Contractor interest on the additional compensation accrued daily at the rate of 7.0% per annum from the date of the completion of the District’s audit.

  • CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes

Time is Money Join Law Insider Premium to draft better contracts faster.