Common use of Loop Provisioning Involving IDLC Clause in Contracts

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhone. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhone, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone AFN has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneAFN. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone AFN (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneAFN, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone AFN will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone CCI has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneCCI. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone CCI (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneCCI, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone CCI will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone MRC has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneMRC. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone MRC (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneMRC, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone MRC will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone PLI has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhonePLI. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone PLI (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhonePLI, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone PLI will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone Micro-Comm has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneMicro-Comm. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone Micro-Comm (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneMicro-Comm, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone Micro-Comm will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone InterGlobe has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneInterGlobe. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone InterGlobe (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneInterGlobe, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone InterGlobe will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone Preferred has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhonePreferred. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone Preferred (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhonePreferred, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone Preferred will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone Sprint has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneSprint. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone Sprint (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneSprint, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone Sprint will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone Cinergy has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneCinergy. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone Cinergy (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneCinergy, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone Cinergy will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone Quality Telephone has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneQuality Telephone. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone Quality Telephone (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneQuality Telephone, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone Quality Telephone will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone BCFL has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneBCFL. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone BCFL (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneBCFL, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone BCFL will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone Spectrotel has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneSpectrotel. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone Spectrotel (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneSpectrotel, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone Spectrotel will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone NationNET has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneNationNET. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone NationNET (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneNationNET, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone NationNET will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone Think 12 has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneThink 12. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone Think 12 (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneThink 12, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone Think 12 will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone ONS has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneONS. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone ONS (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneONS, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone ONS will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone Xxxx has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneXxxx. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone Xxxx (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneXxxx, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone Xxxx will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone GSC has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneGSC. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone GSC (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneGSC, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone GSC will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone VarTec has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneVarTec. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone VarTec (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 2.6.2.1 If no alternate facility is available, and upon request from NewPhoneVarTec, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone VarTec will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone Lightning has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneLightning. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone Lightning (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneLightning, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone Lightning will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone US LEC has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneUS LEC. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone US LEC (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneUS LEC, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone US LEC will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone BTI has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneBTI. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone BTI (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneBTI, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone BTI will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone OnFiber has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneOnFiber. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone OnFiber (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneOnFiber, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone OnFiber will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone OnePoint has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneOnePoint. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone OnePoint (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneOnePoint, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone OnePoint will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone U-Dial has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneU-Dial. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone U-Dial (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneU-Dial, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone U-Dial will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone DSL has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneDSL. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone DSL (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneDSL, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone DSL will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone FLATEL has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneFLATEL. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone FLATEL (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneFLATEL, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone FLATEL will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone ProNet has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneProNet. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone ProNet (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneProNet, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone ProNet will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone Trinity Connect has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneTrinity Connect. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone Trinity Connect (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneTrinity Connect, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone Trinity Connect will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone Charter has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneCharter. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone Charter (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneCharter, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone Charter will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone NGTelecom has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneNGTelecom. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone NGTelecom (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneNGTelecom, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone NGTelecom will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone INET has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneINET. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone INET (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneINET, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone INET will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone CommuniGroup has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneCommuniGroup. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone CommuniGroup (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneCommuniGroup, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone CommuniGroup will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone Kinetix has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneKinetix. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone Kinetix (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneKinetix, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone Kinetix will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone Network PTS has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneNetwork PTS. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone Network PTS (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneNetwork PTS, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone Network PTS will then have the option of paying the one-time SC rates to place the Loop.

Loop Provisioning Involving IDLC. 2.6.1 Where NewPhone Grande has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the customer End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to NewPhoneGrande. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for NewPhone Grande (e.g., hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross-Connect System (DACS)-door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non-designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from NewPhoneGrande, and if agreed to by both Parties, BellSouth may utilize its SC process to determine the additional costs required to provision facilities. NewPhone Grande will then have the option of paying the one-time SC rates to place the Loop.