Manufacturing Sources Sample Clauses

Manufacturing Sources. SMI represents that, as of the Effective Date, it has a fully CE Marking certified and functioning manufacturing source for the Products capable of producing sufficient Product to meet CryoLife’s needs under this Agreement. SMI agrees to maintain such manufacturing source or procure other sources, facilities and/or equipment in order to replace such manufacturing source that are reasonably acceptable to CryoLife and CE Marking certified in the event that SMI’s then-active manufacturing facility becomes unable or unwilling to supply Products in a timely manner. SMI further agrees to establish a second CE Marking certified and fully functioning manufacturing facility for Products that is reasonably acceptable to CryoLife on or before December 31, 2012.
Sample 1Sample 2Sample 3
AutoNDA by SimpleDocs
Manufacturing Sources. To maintain delivery schedules, Seller reserves the right to have all or any part of the Buyer's order manufactured at any of Sellers', sellers' licensees or sub contractors' plants, globally.
Sample 1Sample 2Sample 3
Manufacturing Sources. SMI represents that, as of the Effective Date, it has a fully certified and functioning ISO 9000 manufacturing source for the Modified Starch. In addition, SMI represents that, as of the Effective Date, its sources of raw materials used in the Modified Starch are ISO certified sources that would allow SMI to manufacture the Modified Starch as required by CryoLife. 4.3.1 SMI agrees to maintain such manufacturing source or procure other sources, facilities and/or equipment in order to replace such manufacturing source that are reasonably acceptable to CryoLife and meet ISO 13485 requirements in the event that SMI’s then-active manufacturing facility becomes unable or unwilling to supply Modified Starch in a timely manner. 4.3.2 SMI shall have an approved second source for Modified Starch within thirty-six (36) months from the Effective Date of this License Agreement. Further, SMI will grant CryoLife an option, for a period of thirty-six (36) months from the Effective Date of this License Agreement, to acquire the full Modified Starch production technology for a negotiated sum not to exceed One Million U.S. dollars ($1,000,000.00).
Sample 1Sample 2Sample 3
Manufacturing Sources. To maintain delivery schedules, Seller reservplants on a world-wide basis.
Sample 1Sample 2
Manufacturing Sources. Unless otherwise agreed in writing by Somanetics and CORrestore, during the term of the Licenses, Somanetics shall engage St. Jude Medical, Edwaxxx Xxxe Sciences, Inc., Medtronic, Bio Vascular, Shelhigh, PM Devices, Inc., one of their affiliates or any combination of the foregoing (collectively, the "Manufacturers"), to manufacture the Products.
Sample 1

Related to Manufacturing Sources

  • Manufacturing Services Jabil will manufacture the Product in accordance with the Specifications and any applicable Build Schedules. Jabil will reply to each proposed Build Schedule that is submitted in accordance with the terms of this Agreement by notifying Company of its acceptance or rejection within three (3) business days of receipt of any proposed Build Schedule. In the event of Jabil’s rejection of a proposed Build Schedule, Jabil’s notice of rejection will specify the basis for such rejection. When requested by Company, and subject to appropriate fee and cost adjustments, Jabil will provide Additional Services for existing or future Product manufactured by Jabil. Company shall be solely responsible for the sufficiency and adequacy of the Specifications [***].

  • Manufacture of Products All Products marketed through Grantor's Web ------------------------- Site shall be manufactured, packaged, prepared, and shipped in accordance with the specifications and requirements described on Exhibit A hereto as it may be modified from time to time. Quality control standards relating to the Product's weight, color, consistency, micro-biological content, labeling and packaging are also set forth on Exhibit A. In the event that Exhibit A is incomplete, Products shall be manufactured and shipped in accordance with industry standards.

  • Recipient Products Updated Project Schedule (if applicable) • Updated List of Match Funds (if applicable) • Updated List of Permits (if applicable) • Kick-off Meeting Agenda

  • SHOP DRAWINGS, PRODUCT DATA AND SAMPLES 4.12.1 Shop Drawings are drawings, diagrams, schedules and other, data specially prepared for the Work by the Contractor or any Subcontractor, manufacturer, supplier or distributor to illustrate some portion of the Work. 4.12.2 Product Data are illustrations, standard schedules, performance charts, instructions, brochures, diagrams and other information furnished by the Contractor to illustrate a material, product or system for some portion of the Work. 4.12.3 Samples are physical examples which illustrate materials, equipment or workmanship and establish standards by which the Work will be judged. 4.12.4 The Contractor shall review, approve and submit, with reasonable promptness and in such sequence as to cause no delay in the Work or in the work of the State or any separate contractor, all Shop Drawings, Product Data and Samples required by the Contract Documents. 4.12.5 By approving and submitting Shop Drawings, Product Data and Samples, the Contractor represents that he / she has determined and verified all materials, field measurements, and field construction criteria related thereto, or will do so, and that he / she has checked and coordinated the information contained within such submittals with the requirements of the Work and of the Contract Documents. 4.12.6 The Contractor shall not be relieved of responsibility for any deviation from the requirements of the Contract Documents by the Architect's approval of Shop Drawings, Product Data or Samples under Subparagraph 2.2.7 of these General Conditions unless the Contractor has specifically informed the Architect and the State in writing of such deviation at the time of sub- mission and the Architect and the State has given written approval to the specific deviation. The Contractor shall not be relieved from responsibility for errors or omissions in the Shop Drawings, Product Data or Samples by the Architect's approval thereof. 4.12.7 The Contractor shall direct specific attention, in writing or on resubmitted Shop Drawings, Product Data or Samples, to revisions other than those requested by the Architect on previous submittals. 4.12.8 No portion of the Work requiring submission of a Shop Drawing, Product Data or Sample shall be commenced until the submittal has been approved by the Architect as provided in Subparagraph 2.2.7 of these General Conditions. All such portions of the Work shall be in accordance with approved submittals.

  • Manufacturing (a) The Supplier shall without limitation be responsible, at no additional cost to the Purchaser, for: sourcing and procuring all raw materials for the Products; obtaining all necessary approvals, permits and licenses for the manufacturing of the Products; providing sufficient qualified staff and workers to perform the obligations under this Purchase Agreement; implementing and maintaining effective inventory and production control procedures with respect to the Products; and handling other matters as reasonably requested by the Purchaser from time to time. (b) The Supplier shall not change any process, material, component, packaging or manufacturing location without the Purchaser’s express prior written approval.

  • Manufacturing License Subject to the terms of this Agreement, including without limitation Section 2.2, Theravance grants to GSK an exclusive license under the Theravance Patents and Theravance Know-How to make and have made API Compound or formulated Alliance Product in the Territory.

  • New Products You agree to comply with NASD Notice to Members 5-26 recommending best practices for reviewing new products.

  • API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.

  • PRODUCT MANUFACTURER'S SUPPLIERS Only those dealers/distributors listed by the manufacturer will be considered authorized to act on behalf of the Product Manufacturer.

  • Commercialization Intrexon shall have the right to develop and Commercialize the Reverted Products itself or with one or more Third Parties, and shall have the right, without obligation to Fibrocell, to take any such actions in connection with such activities as Intrexon (or its designee), at its discretion, deems appropriate.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!