Common use of Margin of Preference and Reservations Clause in Contracts

Margin of Preference and Reservations. 32.1 A margin of preference may be allowed on locally manufactured goods only when the contract is open to international tendering, where the tender is likely to attract foreign goods and where the contract exceeds the threshold specified in the Regulations. 32.2 For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity shall not subject the items listed below to international tender and hence no margin of preference shall be allowed. The affected items are: a) motor vehicles, plant and equipment which are assembled in Kenya; b) furniture, textile, foodstuffs, oil and gas, information communication technology, steel, cement, leather agro-processing, sanitary products, and other goods made in Kenya; or c) goods manufactured, mined, extracted or grown in Kenya. 32.3 A margin of preference shall not be allowed unless it is specified so in the TDS. 32.4 Contracts procured on basis of international competitive tendering shall not be subject to reservations to specific groups s as provided in ITT 32.5. 32.5 Where it is intended to reserve a contract to a specific group of businesses (these groups are Small and Medium Enterprises, Women Enterprises, Youth Enterprises and Enterprises of persons living with disability, as the case may be), and who are appropriately registered as such by the authority to be specified in the TDS, a procuring entity shall ensure that the invitation to tender specifically indicates that only businesses or firms belonging to the specified group are eligible to tender as specified in the TDS. No tender shall be reserved to more than one group. If not so stated in the Tender documents, the invitation to tender will be open to all interested tenderers.

Margin of Preference and Reservations. 32.1 ‌ A margin of preference may be allowed on locally manufactured goods only when the contract is open to international tendering, where the tender is likely to attract foreign goods and where the contract exceeds the threshold specified in the Regulations. 32.2 . For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity shall not subject the items listed below to international tender and hence no margin of preference shall be allowed. The affected items are: a) motor vehicles, plant and equipment which are assembled in Kenya; b) furniture, textile, foodstuffs, oil and gas, information communication technology, steel, cement, leather agro-processing, sanitary products, and other goods made in Kenya; or c) goods manufactured, mined, extracted or grown in Kenya. 32.3 . A margin of preference shall not be allowed unless it is specified so in the TDS. 32.4 . Contracts procured on basis of international competitive tendering shall not be subject to reservations to specific groups s as provided in ITT 32.5. 32.5 . Where it is intended to reserve a contract to a specific group of businesses (these groups are Small and Medium Enterprises, Women Enterprises, Youth Enterprises and Enterprises of persons living with disability, as the case may be), and who are appropriately registered as such by the authority to be specified in the TDS, a procuring entity shall ensure that the invitation to tender specifically indicates that only businesses or firms belonging to the specified group are eligible to tender as specified in the TDS. No tender shall be reserved to more than one group. If not so stated in the Tender documents, the invitation to tender will be open to all interested tenderers.

Margin of Preference and Reservations. 32.1 A margin of preference may be allowed on locally manufactured goods only when the contract is open to international tendering, where the tender is likely to attract foreign goods and where the contract exceeds the threshold specified in the Regulations. 32.2 . For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity shall not subject the items listed below to international tender and hence no margin of preference shall be allowed. The affected items are: a) motor vehicles, plant and equipment which are assembled in Kenya; b) furniture, textile, foodstuffs, oil and gas, information communication technology, steel, cement, leather agro-processing, sanitary products, and other goods made in Kenya; or c) goods manufactured, mined, extracted or grown in Kenya. 32.3 . A margin of preference shall not be allowed unless it is specified so in the TDS. 32.4 . Contracts procured on basis of international competitive tendering shall not be subject to reservations to specific groups s as provided in ITT 32.5. 32.5 . Where it is intended to reserve a contract to a specific group of businesses (these groups are Small and Medium Enterprises, Women Enterprises, Youth Enterprises and Enterprises of persons living with disability, as the case may be), and who are appropriately registered as such by the authority to be specified in the TDS, a procuring entity shall ensure that the invitation to tender specifically indicates that only businesses or firms belonging to the specified group are eligible to tender as specified in the TDS. No tender shall be reserved to more than one group. If not so stated in the Tender documents, the invitation to tender will be open to all interested tenderers.

Margin of Preference and Reservations. 32.1 A margin of preference may be allowed on locally manufactured goods only when the contract is open to international tendering, where the tender is likely to attract foreign goods and where the contract exceeds the threshold specified in the Regulations. 32.2 For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity shall not subject the items listed below to international tender and hence no margin of preference shall be allowed. The affected items are: a) motor vehicles, plant and equipment which are assembled in Kenya; b) furniture, textile, foodstuffs, oil and gas, information communication technology, steel, cement, leather agro-processing, sanitary products, and other goods made in Kenya; or c) goods manufactured, mined, extracted or grown in Kenya. 32.3 A margin of preference shall not be allowed unless it is specified so in the TDS. 32.4 Contracts procured on basis of international competitive tendering shall not be subject to reservations to specific groups s as provided in ITT 32.5. 32.5 Where it is intended to reserve a contract to a specific group of businesses (these groups are Small and Medium Enterprises, Women Enterprises, Youth Enterprises and Enterprises of persons living with disability, as the case may be), and who are appropriately registered as such by the authority to be specified in the TDS, a procuring entity shall ensure that the invitation to tender specifically indicates that only businesses or firms belonging to the specified group are eligible to tender as specified in the TDS. No tender shall be reserved to more than one group. If not so stated in the Tender documents, the invitation to tender will be open to all interested tenderers.

Margin of Preference and Reservations. 32.1 A margin of preference may be allowed on locally manufactured goods only when the contract is open to international tendering, where the tender is likely to attract foreign goods and where the contract exceeds the threshold specified specified in the Regulations. 32.2 For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity shall not subject the items listed below to international tender and hence no margin of preference shall be allowed. The affected items are: a) motor vehicles, plant and equipment which are assembled in Kenya; b) furniture, textile, foodstuffs, oil and gas, information communication technology, steel, cement, leather agro-processing, sanitary products, and other goods made in Kenya; or c) goods manufactured, mined, extracted or grown in Kenya. 32.3 A margin of preference shall not be allowed unless it is specified specified so in the TDS. 32.4 Contracts procured on basis of international competitive tendering shall not be subject to reservations to specific specific groups s as provided in ITT 32.5. 32.5 Where it is intended to reserve a contract to a specific specific group of businesses (these groups are Small and Medium Enterprises, Women Enterprises, Youth Enterprises and Enterprises of persons living with disability, as the case may be), and who are appropriately registered as such by the authority to be specified specified in the TDS, a procuring entity shall ensure that the invitation to tender specifically specifically indicates that only businesses or firms firms belonging to the specified specified group are eligible to tender as specified specified in the TDS. No tender shall be reserved to more than one group. If not so stated in the Tender documents, the invitation to tender will be open to all interested tenderers.

Margin of Preference and Reservations. ‌ 32.1 A margin of preference may be allowed on locally manufactured goods only when the contract is open to international tendering, where the tender is likely to attract foreign goods and where the contract exceeds the threshold specified in the Regulations. 32.2 For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity shall not subject the items listed below to international tender and hence no margin of preference shall be allowed. The affected items are: a) motor vehicles, plant and equipment which are assembled in Kenya; b) furniture, textile, foodstuffs, oil and gas, information communication technology, steel, cement, leather agro-processing, sanitary products, and other goods made in Kenya; or c) goods manufactured, mined, extracted or grown in Kenya. 32.3 A margin of preference shall not be allowed unless it is specified so in the TDS. 32.4 Contracts procured on basis of international competitive tendering shall not be subject to reservations to specific groups s as provided in ITT 32.5. 32.5 Where it is intended to reserve a contract to a specific group of businesses (these groups are Small and Medium Enterprises, Women Enterprises, Youth Enterprises and Enterprises of persons living with disability, as the case may be), and who are appropriately registered as such by the authority to be specified in the TDS, a procuring entity shall ensure that the invitation to tender specifically indicates that only businesses or firms belonging to the specified group are eligible to tender as specified in the TDS. No tender shall be reserved to more than one group. If not so stated in the Tender documents, the invitation to tender will be open to all interested tenderers.

Margin of Preference and Reservations. 32.1 31.1 A margin of preference may be allowed on locally manufactured goods only when the contract is open to international tendering, where the tender is likely to attract foreign goods and where the contract exceeds the threshold specified in the Regulations. 32.2 31.2 For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity shall not subject the items listed below to international tender and hence no margin of preference shall be allowed. The affected items are: a) 31.2.1 motor vehicles, plant and equipment which are assembled in Kenya; b) 31.2.2 furniture, textile, foodstuffs, oil and gas, information communication technology, steel, cement, leather agro-processing, sanitary products, and other goods made in Kenya; or c) 31.2.3 goods manufactured, mined, extracted or grown in Kenya. 32.3 31.3 A margin of preference shall not be allowed unless it is specified so in the TDS. 32.4 31.4 Contracts procured on basis of international competitive tendering shall not be subject to reservations to specific groups s as provided in ITT 32.5. 32.5 31.5 Where it is intended to reserve a contract to a specific group of businesses (these groups are Small and Medium Enterprises, Women Enterprises, Youth Enterprises and Enterprises of persons living with disability, as the case may be), and who are appropriately registered as such by the authority to be specified in the TDS, a procuring entity shall ensure that the invitation to tender specifically indicates that only businesses or firms belonging to the specified group are eligible to tender as specified in the TDS. No tender shall be reserved to more than one group. If not so stated in the Tender documents, the invitation to tender will be open to all interested tenderers.

Margin of Preference and Reservations. 32.1 A margin of preference may be allowed on locally manufactured goods only when the contract is open to international tendering, where the tender is likely to attract foreign goods and where the contract exceeds the threshold specified in the Regulations. 32.2 For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity shall not subject the items listed below to international tender and hence no margin of preference shall be allowed. The affected items are: a) motor vehicles, plant and equipment which are assembled in Kenya; b) furniture, textile, foodstuffs, oil and gas, information communication technology, steel, cement, leather agro-processing, sanitary products, and other goods made in Kenya; or c) goods manufactured, mined, extracted or grown in Kenya. 32.3 A margin Amargin of preference shall not be allowed unless it is specified so in the TDS. 32.4 Contracts procured on basis of international competitive tendering shall not be subject to reservations to specific groups s as provided in ITT 32.5. 32.5 Where it is intended to reserve a contract to a specific group of businesses (these groups are Small and Medium Enterprises, Women Enterprises, Youth Enterprises and Enterprises of persons living with disability, as the case may be), and who are appropriately registered as such by the authority to be specified in the TDS, a procuring entity shall ensure that the invitation to tender specifically indicates that only businesses or firms belonging to the specified group are eligible to tender as specified in the TDS. No tender shall be reserved to more than one group. If not so stated in the Tender documents, the invitation to tender will be open to all interested tenderers.

Margin of Preference and Reservations. 32.1 A margin of preference may be allowed on locally manufactured goods only when the contract is open to international tendering, where the tender is likely to attract foreign goods and where the contract exceeds the threshold specified specified in the Regulations. 32.2 For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity shall not subject the items listed below to international tender and hence no margin of preference shall be allowed. The affected items are: a) motor vehicles, plant and equipment which are assembled in Kenya; b) furniture, textile, foodstuffs, oil and gas, information communication technology, steel, cement, leather agro-agro- processing, sanitary products, and other goods made in Kenya; or c) goods manufactured, mined, extracted or grown in Kenya. 32.3 A margin of preference shall not be allowed unless it is specified specified so in the TDS. 32.4 Contracts procured on basis of international competitive tendering shall not be subject to reservations to specific specific groups s as provided in ITT 32.5. 32.5 Where it is intended to reserve a contract to a specific specific group of businesses (these groups are Small and Medium Enterprises, Women Enterprises, Youth Enterprises and Enterprises of persons living with disability, as the case may be), and who are appropriately registered as such by the authority to be specified specified in the TDS, a procuring entity shall ensure that the invitation to tender specifically specifically indicates that only businesses or firms firms belonging to the specified specified group are eligible to tender as specified specified in the TDS. No tender shall be reserved to more than one group. If not so stated in the Tender documents, the invitation to tender will be open to all interested tenderers.

Margin of Preference and Reservations. 32.1 30.1 A margin of preference may be allowed on locally manufactured goods only when the contract is open to international tendering, where the tender is likely to attract foreign goods and where the contract exceeds the threshold specified in the Regulations. 32.2 30.2 For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity shall not subject the items listed below to international tender and hence no margin of preference shall be allowed. The affected items are: a) motor vehicles, plant and equipment which are assembled in Kenya; b) furniture, textile, foodstuffs, oil and gas, information communication technology, steel, cement, leather agro-agro- processing, sanitary products, and other goods made in Kenya; or c) goods Goods manufactured, mined, extracted or grown in Kenya. 32.3 30.3 A margin of preference shall not be allowed unless it is specified so in the TDS. 32.4 30.4 Contracts procured on basis of international competitive tendering shall not be subject to reservations to specific groups s as provided in ITT 32.5.ITT 32.5 30.5 Where it is intended to reserve a contract to a specific group of businesses (these groups are Small and Medium Enterprises, Women Enterprises, Youth Enterprises and Enterprises of persons living with disability, as the case may be), and who are appropriately registered as such by the authority to be specified in the TDS, a procuring entity shall ensure that the invitation to tender specifically indicates that only businesses or firms belonging to the specified group are eligible to tender as specified in the TDS. No tender shall be reserved to more than one group. If not so stated in the Tender documents, the invitation to tender will be open to all interested tenderers.

Margin of Preference and Reservations. 32.1 A margin of preference may be allowed on locally manufactured goods only when the contract is open to international tendering, where the tender is likely to attract foreign goods and where the contract exceeds the threshold specified in the Regulations. 32.2 . For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity shall not subject the items listed below to international tender and hence no margin of preference shall be allowed. The affected items are: a) motor vehicles, plant and equipment which are assembled in Kenya; b) furniture, textile, foodstuffs, oil and gas, information communication technology, steel, cement, leather agro-processing, sanitary products, and other goods made in Kenya; or c) goods manufactured, mined, extracted or grown in Kenya. 32.3 . A margin of preference shall not be allowed unless it is specified so in the TDS. 32.4 . Contracts procured on basis of international competitive tendering shall not be subject to reservations toreservations to specific groups s as provided in ITT 32.5. 32.5 . Where it is intended to reserve a contract to a specific group of businesses (these groups are Small and Medium Enterprises, Women Enterprises, Youth Enterprises and Enterprises of persons living with disability, as the case may be), and who are appropriately registered as such by the authority to be specified in the TDS, a procuring entity shall ensure that the invitation to tender specifically indicates that only businesses or firms belonging to the specified group are eligible to tender as specified in the TDS. No tender shall be reserved to more than one group. If not so stated in the Tender documents, the invitation to tender will be open to all interested tenderers.

Margin of Preference and Reservations. 32.1 A margin of preference may be allowed on locally manufactured goods only when the contract is open to international tendering, where the tender is likely to attract foreign goods and where the contract exceeds the threshold specified in the Regulations. 32.2 For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity shall not subject the items listed below to international tender and hence no margin of preference shall be allowed. The affected items are: a) 32.2.1 motor vehicles, plant and equipment which are assembled in Kenya; b) 32.2.2 furniture, textile, foodstuffs, oil and gas, information communication technology, steel, cement, leather agro-processing, sanitary products, and other goods made in Kenya; or c) 32.2.3 goods manufactured, mined, extracted or grown in Kenya. 32.3 32.2.4 A margin of preference shall not be allowed unless it is specified so in the TDS. 32.4 32.3 Contracts procured on basis of international competitive tendering shall not be subject to reservations to specific groups s as provided in ITT 32.5. 32.5 32.4 Where it is intended to reserve a contract to a specific group of businesses (these groups are Small and Medium Enterprises, Women Enterprises, Youth Enterprises and Enterprises of persons living with disability, as the case may be), and who are appropriately registered as such by the authority to be specified in the TDS, a procuring entity shall ensure that the invitation to tender specifically indicates that only businesses or firms belonging to the specified group are eligible to tender as specified in the TDS. No tender shall be reserved to more than one group. If not so stated in the Tender documents, the invitation to tender will be open to all interested tenderers.

Margin of Preference and Reservations. ‌ 32.1 A margin of preference may be allowed on locally manufactured goods only when the contract is open to international tendering, where the tender is likely to attract foreign goods and goodsand where the contract exceeds the threshold specified in the Regulations. 32.2 For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity shall not subject the items listed below to belowto international tender and hence no margin of preference shall be allowed. The affected items are: a) motor vehicles, plant and equipment which are assembled in Kenya; b) furniture, textile, foodstuffs, oil and gas, information communication technology, steel, cement, leather agro-processing, sanitary products, and other goods made in Kenya; or c) goods manufactured, mined, extracted or grown in Kenya. 32.3 A margin of preference shall not be allowed unless it is specified so in the TDS. 32.4 Contracts procured on basis of international competitive tendering shall not be subject to reservations to specific groups s as provided in ITT 32.5. 32.5 Where it is intended to reserve a contract to a specific group of businesses (these groups are Small and Medium Enterprises, Women Enterprises, Youth Enterprises and Enterprises of persons living with disability, as the case may be), and who are appropriately registered as such by the authority to be specified in the TDS, a procuring entity shall ensure that the invitation to tender specifically indicates that only businesses or firms belonging to the specified group are eligible to tender as specified in the TDS. No tender shall be reserved to more than one group. If not so stated in the Tender documents, the invitation to tender will be open to all interested tenderers.

Margin of Preference and Reservations. ‌ 32.1 A margin of preference may be allowed on locally manufactured goods only when the contract Framework Agreement is open to international tendering, where the tender is likely to attract foreign goods and where the contract Framework Agreement exceeds the threshold specified in the Regulations. 32.2 For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity shall not subject the items listed below to international tender and hence no margin of preference shall be allowed. The affected items are: a) motor vehicles, plant and equipment which are assembled in Kenya; b) furniture, textile, foodstuffs, oil and gas, information communication technology, steel, cement, leather agro-processing, sanitary products, and other goods made in Kenya; or c) goods manufactured, mined, extracted or grown in Kenya. 32.3 A margin of preference shall not be allowed unless it is specified so in the TDS. 32.4 Contracts Framework Agreement procured on basis of international competitive tendering shall not be subject to reservations to specific groups s as provided in ITT 32.5. 32.5 Where it is intended to reserve a contract Framework Agreement to a specific group of businesses (these groups are Small and Medium Enterprises, Women Enterprises, Youth Enterprises and Enterprises of persons living with disability, as the case may be), and who are appropriately registered as such by the authority to be specified in the TDS, a procuring entity shall ensure that the invitation to tender specifically indicates that only businesses or firms belonging to the specified group are eligible to tender as specified in the TDS. No tender shall be reserved to more than one group. If not so stated in the Tender documents, the invitation to tender will be open to all interested tenderers.

Margin of Preference and Reservations. 32.1 ‌ A margin of preference may be allowed on locally manufactured goods only when the contract is open to international tendering, where the tender is likely to attract foreign goods and where the contract exceeds the threshold specified in the Regulations. 32.2 . For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity shall not subject the items listed below to international tender and hence no margin of preference shall be allowed. The affected items are: a) motor vehicles, plant and equipment which are assembled in Kenya; b) furniture, textile, foodstuffs, oil and gas, information communication technology, steel, cement, leather agro-processing, sanitary products, and other goods made in Kenya; or c) goods manufactured, mined, extracted or grown in Kenya. 32.3 . A margin of preference shall not be allowed unless it is specified so in the TDS. 32.4 . Contracts procured on basis of international competitive tendering shall not be subject to reservations to specific groups s as provided in ITT 32.5. 32.5 . Where it is intended to reserve a contract to a specific group of businesses (these groups are Small and Smalland Medium Enterprises, Women Enterprises, Youth Enterprises and Enterprises of persons living with disability, as the case may be), and who are appropriately registered as such by the authority to be specified in the TDS, a procuring entity shall ensure that the invitation to tender specifically indicates that only businesses or firms belonging to the specified group are eligible to tender as specified in the TDS. No tender shall be reserved to more than one group. If not so stated in the Tender documents, the invitation to tender will be open to all interested tenderers.

Margin of Preference and Reservations. 32.1 A margin of preference may be allowed on locally manufactured goods only when the contract is open to international tendering, where the tender is likely to attract foreign goods foreigngoods and where the contract exceeds the threshold specified in the Regulations. 32.2 For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity MCG shall not subject the items listed below to international tender and hence no margin of preference shall be allowed. The affected items affecteditems are: a) motor vehicles, plant and equipment which are assembled in Kenya; b) furniture, textile, foodstuffs, oil and gas, information communication technology, steel, ,cement, leather agro-processing, sanitary products, and other goods made in Kenya; or c) goods manufactured, mined, extracted or grown in Kenya. 32.3 A margin of preference shall not be allowed unless it is specified so in the TDS. 32.4 Contracts procured on basis of international competitive tendering shall not be subject to subjectto reservations to specific groups s as provided in ITT 32.5. 32.5 Where it is intended to reserve a contract to a specific group of businesses (these groups are Small and Medium Enterprises, Women Enterprises, Youth Enterprises and Enterprises andEnterprises of persons living with disability, as the case may be), and who are appropriately registered as such by the authority to be specified in the TDS, a procuring entity shall ensure that the invitation to tender specifically indicates that only businesses or businessesor firms belonging to the specified group are eligible to tender as specified in the TDS. No tender shall be reserved to more than one group. If not so stated in the Tender documents, the invitation to tender will be open to all interested tenderers.

Margin of Preference and Reservations. 32.1 31.1 A margin of preference may be allowed on locally manufactured goods only when the contract is open to international tendering, where the tender is likely to attract foreign goods and where the contract exceeds the threshold specified specified in the Regulations. 32.2 31.2 For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity shall not subject the items listed below to international tender and hence no margin of preference shall be allowed. The affected items are: a) 31.2.1 motor vehicles, plant and equipment which are assembled in Kenya; b) 31.2.2 furniture, textile, foodstuffs, oil and gas, information communication technology, steel, cement, leather agro-processing, sanitary products, and other goods made in Kenya; or c) 31.2.3 goods manufactured, mined, extracted or grown in Kenya. 32.3 31.3 A margin of preference shall not be allowed unless it is specified specified so in the TDS. 32.4 31.4 Contracts procured on basis of international competitive tendering shall not be subject to reservations to specific specific groups s as provided in ITT 32.5. 32.5 31.5 Where it is intended to reserve a contract to a specific specific group of businesses (these groups are Small and Medium Enterprises, Women Enterprises, Youth Enterprises and Enterprises of persons living with disability, as the case may be), and who are appropriately registered as such by the authority to be specified specified in the TDS, a procuring entity shall ensure that the invitation to tender specifically specifically indicates that only businesses or firms firms belonging to the specified specified group are eligible to tender as specified specified in the TDS. No tender shall be reserved to more than one group. If not so stated in the Tender documents, the invitation to tender will be open to all interested tenderers.

Margin of Preference and Reservations. ‌ 32.1 A margin of preference may be allowed on locally manufactured goods only when the contract is open to international tendering, where the tender is likely to attract foreign goods and where the contract exceeds the exceedsthe threshold specified in the Regulations. 32.2 For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity shall not subject the items listed below to international tender and hence no margin of preference shall be allowed. The affected items are: a) motor vehicles, plant and equipment which are assembled in Kenya; b) furniture, textile, foodstuffs, oil and gas, information communication technology, steel, cement, leather agro-processing, sanitary products, and other goods made in Kenya; or c) goods manufactured, mined, extracted or grown in Kenya. 32.3 A margin of preference shall not be allowed unless it is specified so in the TDS.the 32.4 Contracts procured on basis of international competitive tendering shall not be subject to reservations to specific groups s as provided in ITT 32.5. 32.5 Where it is intended to reserve a contract to a specific group of businesses (these groups are Small and Medium Enterprises, Women Enterprises, Youth Enterprises and Enterprises of persons living with disability, as the case may be), and who are appropriately registered as such by the authority to be specified in the TDS, a procuring entity shall ensure that the invitation to tender specifically indicates that only businesses or firms belonging to the specified group are eligible to tender as specified in the TDS. No tender shall be reserved to more than one thanone group. If not so stated in the Tender documents, the invitation to tender will be open to all interested tenderers.

Margin of Preference and Reservations. 32.1 A margin of preference may be allowed on locally manufactured goods only when the contract is open to international tendering, where the tender is likely to attract foreign goods and where the contract exceeds the threshold specified in the Regulations. 32.2 For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity County Government of Narok shall not subject the items listed below to international tender and hence no margin of preference shall be allowed. The affected items are: a) motor vehicles, plant and equipment which are assembled in Kenya; b) furniture, textile, foodstuffs, oil and gas, information communication technology, steel, cement, leather agro-processing, sanitary products, and other goods made in Kenya; or c) goods manufactured, mined, extracted or grown in Kenya. 32.3 A margin of preference shall not be allowed unless it is specified so in the TDS. 32.4 Contracts procured on basis of international competitive tendering shall not be subject to reservations to specific groups s as provided in ITT 32.5. 32.5 Where it is intended to reserve a contract to a specific group of businesses (these groups are Small and Medium Enterprises, Women Enterprises, Youth Enterprises and Enterprises of persons living with disability, as the case may be), and who are appropriately registered as such by the authority to be specified in the TDS, a procuring entity shall ensure that the invitation to tender specifically indicates that only businesses or firms belonging to the specified group are eligible to tender as specified in the TDS. No tender shall be reserved to more than one group. If not so stated in the Tender documents, the invitation to tender will be open to all interested tenderers.

Margin of Preference and Reservations. 32.1 ‌ A margin of preference may be allowed on locally manufactured goods only when the contract is open to international tendering, where the tender is likely to attract foreign goods and where the contract exceeds the threshold specified in the Regulations. 32.2 . For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity shall not subject the items listed below to international tender and hence no margin of preference shall be allowed. The affected items are: a) motor vehicles, plant and equipment which are assembled in Kenya; b) furniture, textile, foodstuffs, oil and gas, information communication technology, steel, cement, leather agro-processing, sanitary products, and other goods made in Kenya; or c) goods manufactured, mined, extracted or grown in Kenya. 32.3 . A margin of preference shall not be allowed unless it is specified so in the TDS. 32.4 . Contracts procured on basis of international competitive tendering shall not be subject to reservations toreservations to specific groups s as provided in ITT 32.5. 32.5 . Where it is intended to reserve a contract to a specific group of businesses (these groups are Small and Medium Enterprises, Women Enterprises, Youth Enterprises and Enterprises of persons living with disability, as the case may be), and who are appropriately registered as such by the authority to be specified in the TDS, a procuring entity shall ensure that the invitation to tender specifically indicates that only businesses or firms belonging to the specified group are eligible to tender as specified in the TDS. No tender shall be reserved to more than one group. If not so stated in the Tender documents, the invitation to tender will be open to all interested tenderers.

Margin of Preference and Reservations. 32.1 A margin of preference may be allowed on locally manufactured goods only when the contract is open to international tendering, where the tender is likely to attract foreign goods and where the contract exceeds the threshold specified specified in the Regulations. 32.2 For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity shall not subject the items listed below to international tender and hence no margin of preference shall be allowed. The affected items are: a) motor vehicles, plant and equipment which are assembled in Kenya; b) furniture, textile, foodstuffs, oil and gas, information communication technology, steel, cement, leather agro-processing, sanitary products, and other goods made in Kenya; or c) goods Goods manufactured, mined, extracted or grown in Kenya. 32.3 A margin of preference shall not be allowed unless it is specified specified so in the TDS. 32.4 Contracts procured on basis of international competitive tendering shall not be subject to reservations to specific specific groups s as provided in ITT 32.5. 32.5 Where it is intended to reserve a contract to a specific specific group of businesses (these groups are Small and Medium Enterprises, Women Enterprises, Youth Enterprises and Enterprises of persons living with disability, as the case may be), and who are appropriately registered as such by the authority to be specified specified in the TDS, a procuring entity shall ensure that the invitation to tender specifically specifically indicates that only businesses or firms firms belonging to the specified specified group are eligible to tender as specified specified in the TDS. No tender shall be reserved to more than one group. If not so stated in the Tender documents, the invitation to tender will be open to all interested tenderers.

Margin of Preference and Reservations. 32.1 31.1 A margin of preference may be allowed on locally manufactured goods only when the contract is open to international tendering, where the tender is likely to attract foreign goods and where the contract exceeds the threshold specified in the Regulations. 32.2 31.2 For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity shall not subject the items listed below to international tender and hence no margin of preference shall be allowed. The affected items are: a) motor vehicles, plant and equipment which are assembled in Kenya; b) furniture, textile, foodstuffs, oil and gas, information communication technology, steel, cement, leather agro-processing, sanitary products, and other goods made in Kenya; or c) goods manufactured, mined, extracted or grown in Kenya. 32.3 31.3 A margin of preference shall not be allowed unless it is specified so in the TDS. 32.4 31.4 Contracts procured on basis of international competitive tendering shall not be subject to reservations to specific groups s as provided in ITT 32.5. 32.5 31.5 Where it is intended to reserve a contract to a specific group of businesses (these groups are Small and Medium Enterprises, Women Enterprises, Youth Enterprises and Enterprises of persons living with disability, as the case may be), and who are appropriately registered as such by the authority to be specified in the TDS, a procuring entity shall ensure that the invitation to tender specifically indicates that only businesses or firms belonging to the specified group are eligible to tender as specified in the TDS. No tender shall be reserved to more than one group. If not so stated in the Tender documents, the invitation to tender will be open to all interested tenderers.

Margin of Preference and Reservations. 32.1 A margin of preference may be allowed on locally manufactured goods only when the contract is open to international tendering, where the tender is likely to attract foreign goods and where the contract exceeds the threshold specified in the Regulations. 32.2 For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity shall not subject the items listed below to international tender and hence no margin of preference shall be allowed. The affected items are:no a) motor vehicles, plant and equipment which are assembled in Kenya; b) furniture, textile, foodstuffs, oil and gas, information communication technology, steel, cement, ,leather agro-agro- processing, sanitary products, and other goods made in Kenya; or c) goods manufactured, mined, extracted or grown in Kenya. 32.3 A margin of preference shall not be allowed unless it is specified so in the TDS. 32.4 Contracts procured on basis of international competitive tendering shall not be subject to reservations toreservations to specific groups s as provided in ITT 32.5. 32.5 Where it is intended to reserve a contract to a specific group of businesses (these groups are Small and Smalland Medium Enterprises, Women Enterprises, Youth Enterprises and Enterprises of persons living with disability, as the case may be), and who are appropriately registered as such by the authority to be specified in the TDS, a procuring entity shall ensure that the invitation to tender specifically indicates that only businesses or firms belonging to the specified group are eligible to tender as specified in the TDS. No tender shall be reserved to more than one group. If not so stated in the Tender documents, the invitation to tender will be open to all interested tenderers.

Margin of Preference and Reservations. 32.1 A margin of preference may be allowed on locally manufactured goods only when the contract is open to international tendering, where the tender is likely to attract foreign goods and where the contract exceeds the threshold specified in the Regulations. 32.2 For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity shall not subject the items listed below to international tender and hence no margin of preference shall be allowed. The affected items are: a) motor vehicles, plant and equipment which are assembled in Kenya; b) furniture, textile, foodstuffs, oil and gas, information communication technology, steel, cement, leather agro-agro- processing, sanitary products, and other goods made in Kenya; or c) goods manufactured, mined, extracted or grown in Kenya. 32.3 A margin of preference shall not be allowed unless it is specified so in the TDS. 32.4 Contracts procured on basis of international competitive tendering shall not be subject to reservations to specific groups s as provided in ITT 32.5. 32.5 Where it is intended to reserve a contract to a specific group of businesses (these groups are Small and Medium Enterprises, Women Enterprises, Youth Enterprises and Enterprises of persons living with disability, as the case may be), and who are appropriately registered as such by the authority to be specified in the TDS, a procuring entity shall ensure that the invitation to tender specifically indicates that only businesses or firms belonging to the specified group are eligible to tender as specified in the TDS. No tender shall be reserved to more than one group. If not so stated in the Tender documents, the invitation to tender will be open to all interested tenderers.