Meter software Sample Clauses

The 'Meter software' clause defines the terms under which software is used to monitor, measure, or track usage of a particular service or product. Typically, this clause outlines the rights and obligations regarding the installation, access, and operation of metering software, specifying who is responsible for maintaining the software and how data collected will be used. Its core practical function is to ensure accurate measurement of usage for billing, compliance, or performance purposes, thereby preventing disputes and ensuring transparency between parties.
Meter software. 6.1. The meter’s software shall be supplied with the meters with open license and security keys and programing cable for at least 15 users, this software should be user-friendly including all controllable parameterization features such as multi-level of security for down loading and up loading the data USB key is required . The software module could be upgraded or modified upon to IDECO requests without extra charges while (IDECO) owns all software management properties. The software shall be submitted with very detailed user manual along with the sample which should be submitted with the offer this software should have individual user accounts and it should communicate with the meters using IR and also remotely communication with free license for the all supplied meter quantity. (The vendor should make any required modification on the software within 24 months after delivery with maximum 30 days to complete any requested modification after IDECO send it to his official address (email or fax)). 6.2. The meter software is preferred to have the ability of programing number of meters connected to the system remotely at once, monitor and configured at same time. 6.3. The meter shall be able to store all events happened with their time stamp in the log book such as (power up, power down, tampering events, over voltage... etc.). This event parameter should be programmable for the value and the duration (for some event like over voltage or sag …. etc.) which should be up to 60 minutes interval. 6.4. The features in the Special Requirements are required. 6.5. The vendor shall provide IDECO with any needed support to program IDECO HHU to control the meter. Upon to IDECO request with the same modification condition in point 6.1. 6.6. The software shall be compatible to connect to the meters remotely through GPRS and RF the tenderer should supply all the required to run the software using IDECO servers to support all the supplied quantity of meters. 6.7. The software and the meter shall have a log, where it shall store the user information, meter number, date & time, and the type of modification accrued.
View SourceView Similar (6)
Meter software. Item Approved Deviation 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8
View SourceView Similar (3)
Meter software. 5.1. The meter’s software shall be supplied with the meters with full lifetime open license and should be user-friendly including all controllable parameterization features such as multi-level of security for down loading and up loading the data. 5.2. The software module preferred to be upgraded or modified upon to IDECO requests without extra charges while (IDECO) owns all software management properties. 5.3. The software shall be submitted with very detailed user manual along with the sample which should be submitted with the offer this software should have individual user accounts and it should communicate with the meters using IR 5.4. The meter software is preferred to have the ability of programing number of meters connected to the system remotely at once, monitor and configured at same time. 5.5. The meter shall be able to store all events happened with their time stamp in the log book such as (power up, power down, tampering events, over voltage... etc.). This event parameter should be programmable for the value and the duration (for some event like over voltage or sag …. etc.) which should be up to 60 minutes interval. 5.6. The vendor shall provide IDECO with any needed support to program IDECO HHU to control the meter upon to IDECO request with the same modification condition in point 6.1. 5.7. If the vendor didn’t provide AMI service with the meters The PC software must has the capability to connect be to the meters remotely through GPRS, and the tenderer should supply all the required to run the software using IDECO servers to support all the supplied quantity of meters , if the PC software didn’t support this feature the vendor should provide other remote solution 5.8. The meter firmware preferred to be upgrade remotely with all required security stages
View Source
Meter software. The meter’s software shall be supplied with the meters with open license and security keys and programing cable for at least 30 users, this software should be user-friendly including all controllable parameterization features such as multi-level of security for down loading and up loading .
View Source
Meter software. 6.1. The meter’s software shall be supplied with the meters with open license and security keys and programing cable for at least 15 users, this software should be user-friendly including all controllable parameterization features such as multi-level of security for down loading and up loading the data USB key is required . The software module could be upgraded or modified upon to IDECO requests without extra charges while (IDECO) owns all software management properties. The software shall be submitted with very detailed user manual along with the sample which should be submitted with the offer this software should have individual user accounts and it should communicate with the meters using IR and also remotely communication with free license for the all supplied meter quantity. (The vendor should make any required modification on the software within 24 months after delivery with maximum 30 days to complete any requested modification after IDECO send it to his official address (email or fax)). 6.2. The meter shall be able to store all events happened with their time stamp in the log book such as (power up, power down, tampering events, over voltage... etc.). This event parameter should be programmable for the value and the duration (for some event like over voltage or sag …. etc.) which should be up to 60 minutes interval. 6.3. The software features in the Special Requirements are required. 6.4. The software shall be compatible to connect to the meters remotely through cellular, and the tenderer should supply all the required to run the software using IDECO servers to support all the supplied quantity of meters. 6.5. Its highly prefferd to have an independent security level in the software (with a separate password) regarding the CT and VT ratio. The default password shall be hard to remember and the manufacturer should provide IDECO with the password upon delivery. 6.6. The software and the meter are preferred to have a log, where it shall store the user, meter number, date & time, and the type of modification accrued.
View Source
Meter software. Item Approved Deviation 6.1.1 6.1.2 6.1.3 6.1.4 6.1.5 6.1.6 6.2.1 6.2.2
View Source
Meter software. 6.1. The meter’s software shall be supplied with the meters with open license and security keys and programing cable for at least 15 users, this software should be user-friendly including all controllable parameterization features such as multi-level of security for down loading and up loading the data USB key is required . The software module could be upgraded or modified upon to IDECO requests without extra charges while (IDECO) owns all software management properties. The software shall be submitted with very detailed user manual along with the sample which should be submitted with the offer this software should have individual user accounts and it should communicate with the meters using IR and also remotely communication with free license for the all supplied meter quantity. (The vendor should make any required modification on the software within 24 months after delivery with maximum 30 days to complete any requested modification after IDECO send it to his official address (email or fax)). 6.2. The meter shall be able to store all events happened with their time stamp in the log book such as (power up, power down, tampering events, over voltage... etc.). This event parameter should be programmable for the value and the duration (for some event like over voltage or sag …. etc.) which should be up to 60 minutes interval. 6.3. The software features in the Special Requirements are required. 6.4. The software shall be compatible to connect to the meters remotely through cellular, and the tenderer should supply all the required to run the software using IDECO servers to support all the supplied quantity of meters. 6.5. Its highly prefferd to have an independent security level in the software (with a separate password) regarding the CT and VT ratio. The default password shall be hard to remember and the manufacturer should provide IDECO with the password upon delivery. 6.6. The software and the meter are preferred to have a log, where it shall store the user, meter number, date & time, and the type of modification accrued.
View Source

Related to Meter software

  • Server Software Subject to the terms and conditions of this ▇▇▇▇, Vocera grants you the non-exclusive right to (i) install and run (“Use”) the Server Software on computer systems (each, a “Server Computer”) located at End User’s Facilities in the geographic territory designated above (“Territory”); (ii) to Use the Client Software in conjunction with Authorized Client Devices and such Server Computers; and (iii) for pilot licenses for certain Software provided on a trial basis, use such Software for the limited term specified by Vocera in writing. You may Use the standard Server Software on one primary Server Computer (or a primary cluster of computers suitably configured for productive use of the Server Software). You may install backup copies of the Server Software on backup Server Computers to provide redundancy in the event of failure of the primary Server Computer(s) but, unless you have acquired additional licenses or a failover license from Vocera, you may not run such backup or additional copies concurrently with the primary copies. Vocera grants you the right to use the applicable License Key issued by Vocera only to enable Use of the Server Software in conjunction with the licensed Server Computers. Server Software may be licensed for a Subscription Term as specified in the Quote.

  • Embedded Software To the extent any goods contain Embedded Software (defined below) that is not Buyer’s Property, no title to such Embedded Software shall pass to Buyer, and Supplier shall grant Buyer, its customers and all other users a non-exclusive worldwide, irrevocable, perpetual, royalty-free right to use, load, install, execute, demonstrate, market, test, resell, sublicense and distribute such Embedded Software as an integral part of such goods or for servicing the goods (the “Buyer-Required License”). If such Embedded Software or any part thereof is owned by a third party, prior to delivery, Supplier shall obtain the Buyer-Required License from such third-party owner. “Embedded Software” means software necessary for operation of goods and embedded in and delivered as an integral part of goods.

  • Licensed Software Computer program(s) provided by Contractor in connection with the Deliverables, subject to Section 14 of this Contract.

  • Computer Software The Grantee certifies that it has appropriate systems and controls in place to ensure that state funds will not be used in the performance of this Grant Agreement for the acquisition, operation, or maintenance of computer software in violation of copyright laws.

  • Antivirus software All workstations, laptops and other systems that process and/or store PHI COUNTY discloses to CONTRACTOR or CONTRACTOR creates, receives, maintains, or transmits on behalf of COUNTY must have installed and actively use comprehensive anti-virus software solution with automatic updates scheduled at least daily.