Modifications, etc Any renewal, extension, modification, increase, decrease, alteration, rearrangement, exchange or reissuance of all or any part of the Liabilities or the Credit Agreement or any instrument executed in connection therewith, or any contract or understanding between Borrower and any of the Lenders, or any other Person, pertaining to the Liabilities;
Amendments, Modifications, etc This Agreement may not be amended or modified except by an agreement in writing executed by Exchangeco, Patch and the Trustee and approved by the Shareholders in accordance with section 11.2 of the Exchangeable Share Provisions.
Unbundled Loop Modifications (Line Conditioning 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Subloop that may diminish the capability of the Loop or Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the BellSouth’s TR 73600 Unbundled Local Loop Technical Specification.
2.5.2 BellSouth will remove load coils only on copper Loops and Subloops that are less than eighteen thousand (18,000) feet in length.
2.5.3 For any copper loop being ordered by NewPhone which has over six thousand (6,000) feet of combined bridged tap will be modified, upon request from NewPhone, so that the loop will have a maximum of six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to NewPhone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper Loop that will result in a combined total of bridged tap between two thousand five hundred (2,500) and six thousand (6,000) feet will be performed at the rates set forth in Exhibit A.
2.5.4 NewPhone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0) and two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s SC Process as mutually agreed to by the Parties.
2.5.5 Rates for ULM are as set forth in Exhibit A.
2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered.
2.5.7 If NewPhone requests ULM on a reserved facility for a new Loop order, BellSouth may perform a pair change and provision a different Loop facility in lieu of the reserved facility with ULM if feasible. The Loop provisioned will meet or exceed specifications of the requested Loop facility as modified. NewPhone will not be charged for ULM if a different Loop is provisioned. For Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the Loop provisioned.
2.5.8 NewPhone shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that NewPhone desires BellSouth to condition.
2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for NewPhone, NewPhone will submit a SI to BellSouth. If a spare Loop facility that meets the Loop modification specifications requested by NewPhone is available at the location for which the ULM was requested, NewPhone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, NewPhone will not be charged for ULM but will only be charged the service order charges for submitting an order.
Cost Modifications The parties may agree to a reduction in the cost of the Contract at any time during which the Contract is in effect. Without intending to impose a limitation on the nature of the reduction, the reduction may be to hourly, staffing or unit costs, the total cost of the Contract or the reduction may take such other form as the State deems to be necessary or appropriate.
Limitation on Changes in Fiscal Periods Permit the fiscal year of the Borrower to end on a day other than December 31 or change the Borrower's method of determining fiscal quarters.
Reallocation of Pro Rata Share; Amendments For purposes of determining Lenders’ obligations to fund or participate in Loans or Letters of Credit, Agent may exclude the Commitments and Loans of any Defaulting Lender(s) from the calculation of Pro Rata shares. A Defaulting Lender shall have no right to vote on any amendment, waiver or other modification of a Loan Document, except as provided in Section 14.1.1(c).
Alterations, Modifications and Additions Company will, or will cause a Permitted Lessee to, make (or cause to be made) such alterations and modifications in and additions to the Airframe and the Engines as are required from time to time to meet the applicable requirements of the FAA or any applicable government of any other jurisdiction in which the Aircraft is then registered; except for (i) immaterial and non-recurring violations with respect to which corrective measures are being taken promptly by Company (or, if a Lease is then in effect, any Permitted Lessee) upon discovery thereof and (ii) any law, rule, regulation or order the validity or application of which is being contested in good faith by Company (or, if a Lease is then in effect, any Permitted Lessee) in any manner which does not involve any material risk of sale, loss or forfeiture of the Aircraft and does not materially adversely affect Loan Trustee’s interest in the Aircraft. In addition, Company (or any Permitted Lessee), at its own expense, may from time to time add further parts or accessories and make or cause to be made such alterations and modifications in and additions to the Airframe or any Engine as Company (or any Permitted Lessee) deems desirable in the proper conduct of its business, including, without limitation, removal (without replacement) of Parts; provided that no such alteration, modification or addition shall materially diminish the value or utility of the Airframe or such Engine below its value or utility immediately prior to such alteration, modification or addition, assuming that the Airframe or such Engine was then in the condition required to be maintained by the terms of this Indenture, except that the value (but not the utility) of the Airframe or any Engine may be reduced by the value of any such Parts that are removed that Company (or such Permitted Lessee) deems obsolete or no longer suitable or appropriate for use on the Airframe or any Engine. For the avoidance of doubt, Company may make alterations in the passenger configuration of the Aircraft and such alterations shall not be subject to the immediately preceding sentence. All Parts incorporated or installed in or attached or added to the Airframe or any Engine as the result of such alteration, modification or addition shall, without further act, be subject to the Lien of this Indenture. Notwithstanding the foregoing, Company (or any Permitted Lessee) may, at any time, remove any Part from the Airframe or any Engine if such Part: (i) is in addition to, and not in replacement of or substitution for, any Part originally incorporated or installed in or attached to the Airframe or such Engine at the time of delivery thereof to Company or any Part in replacement of, or substitution for, any such Part, (ii) is not required to be incorporated or installed in or attached or added to the Airframe or such Engine pursuant to the first sentence of this Section 7.04(c) and (iii) can be removed from the Airframe or such Engine without materially diminishing the value or utility required to be maintained by the terms of this Indenture that the Airframe or such Engine would have had had such Part never been installed on the Airframe or such Engine. Upon the removal by Company (or any Permitted Lessee) of any Part as permitted by this Section 7.04(c), such removed Part shall, without further act, be free and clear of all rights and interests of Loan Trustee and the Lien of this Indenture and shall no longer be deemed a Part hereunder. Upon request of Company from time to time, Loan Trustee shall execute and deliver to Company instruments reasonably requested by Company confirming the release of any such removed Part from the Lien of this Indenture. Loan Trustee acknowledges that it has no interest in the Excluded Equipment. Notwithstanding the provisions of this Section 7.04(c) or any other term or condition of this Indenture, Company (or any Permitted Lessee) may from time to time install on, and remove from, the Aircraft equipment that is owned by, leased to or conditionally sold to Company (or any Permitted Lessee) (and title to such equipment shall remain vested in Company, such Permitted Lessee, or the lessor or the conditional vendor thereof) if (1) such equipment is Excluded Equipment and (2) the location affected by any such removal, if damaged, is repaired prior to return, in a workmanlike manner, to a condition suitable for commercial passenger service; provided that all costs of installation, removal and replacement shall be the responsibility of Company.
Notice of Adjustments and Certain Other Events (a) Whenever the Fixed Settlement Rates are adjusted as herein provided, the Company shall, as soon as practicable following the occurrence of an event that requires an adjustment pursuant to Section 5.05 (or if the Company is not aware of such occurrence, as soon as practicable after becoming so aware):
(i) compute each adjusted Fixed Settlement Rate in accordance with Section 5.05 and prepare and transmit to the Purchase Contract Agent an Officers’ Certificate setting forth each adjusted Fixed Settlement Rate, the method of calculation thereof in reasonable detail, and the facts requiring such adjustment and upon which such adjustment is based; and
(ii) provide a written notice to the Holders of the Units of the occurrence of such event and a statement in reasonable detail setting forth the method by which the adjustment to each Fixed Settlement Rate was determined and setting forth each adjusted Fixed Settlement Rate.
(b) The Purchase Contract Agent shall not at any time be under any duty or responsibility to any Holder to determine whether any facts exist which may require any adjustment of each Fixed Settlement Rate, or with respect to the nature or extent or calculation of any such adjustment when made, or with respect to the method employed in making the same. The Purchase Contract Agent shall be fully authorized and protected in relying on any Officers’ Certificate delivered pursuant to Section 5.06(a)(i) and any adjustment contained therein and the Purchase Contract Agent shall not be deemed to have knowledge of any adjustment unless and until it has received such certificate. The Purchase Contract Agent shall not be accountable with respect to the validity or value (or the kind or amount) of any shares of Common Stock, or of any securities or property, which may at the time be issued or delivered with respect to any Purchase Contract; and the Purchase Contract Agent makes no representation with respect thereto. The Purchase Contract Agent shall not be responsible for any failure of the Company to issue, transfer or deliver any shares of Common Stock pursuant to a Purchase Contract or to comply with any of the duties, responsibilities or covenants of the Company contained in this Article 5.
Modification of Allocations The provisions of Articles X and XI and other provisions of this Agreement are intended to comply with Treasury Regulations Section 1.704 and shall be interpreted and applied in a manner consistent with such section of the Treasury Regulations. In the event that the General Partner determines, in its sole discretion, that it is prudent to modify the manner in which the Capital Accounts of the Partners, or any debit or credit thereto, are computed in order to comply with such section of the Treasury Regulations, the General Partner may make such modification, but only with the Consent of the Special Limited Partner, to the minimum extent necessary, to effect the plan of allocations and Distributions provided for elsewhere in this Agreement. Further, the General Partner shall make any appropriate modifications, but only with the Consent of the Special Limited Partner, in the event it appears that unanticipated events (e.g., the existence of a Partnership election pursuant to Code Section 754) might otherwise cause this Agreement not to comply with Treasury Regulation Section 1.704.
Amendments - Changes/Extra Work The Subrecipient shall make no changes to this Contract without the County’s written consent. In the event that there are new or unforeseen requirements, the County has the discretion with the Subrecipient’s concurrence, to make changes at any time without changing the scope or price of the Contract. If County-initiated changes or changes in laws or government regulations affect price, the Subrecipient’s ability to deliver services, or the project schedule, the Subrecipient will give County written notice no later ten (10) days from the date the law or regulation went into effect or the date the change was proposed and Subrecipient was notified of the change. Such changes shall be agreed to in writing and incorporated into a Contract amendment. Said amendment shall be issued by the County-assigned Contract Administrator, shall require the mutual consent of all Parties, and may be subject to approval by the County Board of Supervisors. Nothing herein shall prohibit the Subrecipient from proceeding with the work as originally set forth or as previously amended in this Contract.
