No Infringement or Breach Sample Clauses

No Infringement or Breach. Except as disclosed in Exhibit 4.1.7, neither the signature of this Agreement by each Company nor the implementation of the transactions and performance of the obligations established herein: (i) shall result in infringement to any applicable law upon which the Companies may be bound or by which the Companies may be affected; (ii) shall give rise to infringement to, noncompliance with, default in relation to or termination of any instrument, commitment or covenant entered into by any of the Companies; (iii) shall result in the creation of any Lien or limitation of the capacity of any of the Companies to own, operate or dispose their property and assets and conduct their activities in the Regular Course of Business; or (iv) shall require any payment, or give rise to any termination, acceleration, creation or imposition of any Liens, or another Claim related to any of the Companies and to the Companies’ Bonds, at any time and for any reason, according to any (a) agreement, settlement, commitment, promise, authorization, promissory note, securitized debt, mortgage, license; or (b) by-laws, articles of association, award, decision or order from any Governmental Authority to which any of the Companies is subject or to which the Companies’ Bonds are subject.
AutoNDA by SimpleDocs

Related to No Infringement or Breach

  • No Infringement To the best of the Company's knowledge, the Company has not violated or infringed and is not currently violating or infringing, and the Company has not received any communications alleging that the Company (or any of its employees or consultants) has violated or infringed, any Intellectual Property of any other person or entity, to the extent that any such violation or infringement, either individually or together with all other such violations and infringements, would have a Material Adverse Effect.

  • REMEDY FOR BREACH OF WARRANTY 3.1. Subject to the exclusions and limitations set out above, if the Product fails to comply with the Limited Warranty in clauses 1.2 or 1.3, BYD will repair or replace the non-conforming Product or parts thereof within the warranty term at no charge (or provide a partial refund) on the following conditions. 3.2. Whether to repair or replace the Product will be determined by BYD in its sole discretion. 3.3. The Product or any of its parts to be replaced will have the same performance and reliability as the original Product. If the Production of the relevant type of the Product or any of its parts has been discontinued, withdrawn from the market, or are otherwise unavailable, BYD may replace the Product or parts with a similar Product or part (which may include previously used parts that are equivalent to new in performance and reliability). 3.4. If BYD does not repair or replace the defective Product or parts, BYD will refund You an amount of money calculated as follows: a) If the Product fails to comply with the Limited Performance Warranty in clause 1.3, BYD may calculate the refund using one of the two refund formulas below: i) Refund = maximum claim amount* x (warranted Minimum Throughput Energy - output energy of the Product recorded in the control module of the Product)/ warranted Minimum Throughput Energy; or ii) Refund = maximum claim amount* x (warranted remaining Useable Energy - remaining Useable Energy)/ warranted Usable Energy; and b) If the Product cannot be operated, BYD will calculate the refund as follows: Refund = (maximum claim amount*/120) x (120 - number of months since Warranty Start Date). *The maximum claim amount is the market value of the Product (or an equivalent Product) determined by BYD if it were purchased new with no defects. 3.5. The remedies as set out above are the sole and exclusive obligations of BYD to You under this Limited Warranty, and BYD will have no other liability to You if the Product fails to comply with the Limited Warranty.

  • Breach by Licensee a. The licensee shall have five (5) business days from its receipt of written notice by Producer and/or Producer’s authorized representative to cure any alleged breach of this Agreement by Licensee. Licensee’s failure to cure the alleged breach within five (5) business days shall result in Licensee’s default of its obligations, its breach of this Agreement, and at Producer's sole discretion, the termination of Licensee’s rights hereunder. b. If Licensee engages in the commercial exploitation and/or sale of the Beat or New Song outside of the manner and amount expressly provided for in this Agreement, Licensee shall be liable to Producer for monetary damages in an amount equal to any and all monies paid, collected by, or received by Licensee, or any third party on its behalf, in connection with such unauthorized commercial exploitation of the Beat and/or New Song. c. Licensee recognizes and agrees that a breach or threatened breach of this Agreement by Licensee give rise to irreparable injury to Producer, which may not be adequately compensated by damages. Accordingly, in the event of a breach or threatened breach by the Licensee of the provisions of this Agreement, Producer may seek and shall be entitled to a temporary restraining order and a preliminary injunction restraining the Licensee from violating the provisions of this Agreement. Nothing herein shall prohibit Producer from pursuing any other available legal or equitable remedy from such breach or threatened breach, including but not limited to the recovery of damages from the Licensee. The Licensee shall be responsible for all costs, expenses or damages that Producer incurs as a result of any violation by the Licensee of any provision of this Agreement. Licensee’ obligation shall include court costs, litigation expenses, and reasonable attorneys' fees.

  • Liability for Breach of Contract 1. Party A and Party B shall strictly perform the terms stipulated in the agreement. If one party breaches the contract, the breaching party shall bear the liability for breach of contract according to the contract. 2. If the product is delivered by Party A to Party B and Party B fails to raise any objection to the product quality within the acceptance period, Party B shall not apply for return or replacement; If the product quality problems caused by Party B due to Party B's reasons or the intervention of a third party, which are not caused by the product itself, and caused by Party B's failure to raise any objection within the time limit since the date of acceptance, Party A can repair and rework the products, and Party B shall bear the rework service fee, material fee, processing fee, labor wages and other expenses incurred by Party A; 3. If the payment is not made in advance and then delivered, the ownership of the goods stipulated in this agreement still belongs to Party A before Party B pays off the payment, and Party A has the right to take back the goods at any time. Meanwhile, before this, Party B shall properly keep the goods and ensure that they are intact. If there is any damage, Party B shall compensate Party A according to the price of the goods agreed in the agreement. If the amount is not enough to make up for the losses, it shall also compensate Party A for all losses. 4. If Party B violates the agreement or refuses to perform the cooperation content during the cooperation period of this agreement, and refuses to perform or even withdraws from the cooperation after being urged by Party A, Party A has the right not to return the initial fee paid by Party B as a security deposit; At the same time, Party B shall cooperate with Party A to return all cooperation materials such as cooperation project materials and trademark product authorization documents, and compensate all economic losses suffered by Party A; 5. If Party B violates this agreement and causes losses to Party A, all expenses (including but not limited to attorney fees, legal fees, arbitration fees, announcement fees, preservation fees, guarantee fees, appraisal fees and auction evaluation fees) incurred by Party A for safeguarding its own legitimate rights and interests shall be borne by Party B; 6. If Party B cancels or changes the order without authorization, it shall pay 20% of the order price as liquidated damages and compensate Party A for all losses such as stocking, labor and profit.

  • Liability for Breach of Agreement Upon the effectiveness of this Agreement, the Parties hereto shall perform their respective obligations under the Agreement. Any failure to perform the obligations stipulated in the Agreement, in part or in whole, shall be deemed as breach of contract and the breaching party shall compensate the non-breaching party for the loss incurred as a result of the breach.

  • Infringement Indemnification If notified promptly in writing of any judicial action brought against City based on an allegation that City’s use of the Licensed Software infringes a patent, copyright, or any right of a third party or constitutes misuse or misappropriation of a trade secret or any other right in intellectual property (Infringement), Contractor will hold City harmless and defend such action at its own expense. Contractor will pay the costs and damages awarded in any such action or the cost of settling such action, provided that Contractor shall have sole control of the defense of any such action and all negotiations or its settlement or compromise. If notified promptly in writing of any informal claim (other than a judicial action) brought against City based on an allegation that City’s use of the Licensed Software constitutes Infringement, Contractor will pay the costs associated with resolving such claim and will pay the settlement amount (if any), provided that Contractor shall have sole control of the resolution of any such claim and all negotiations for its settlement. In the event a final injunction is obtained against City’s use of the Licensed Software by reason of Infringement, or in Contractor’s opinion City’s use of the Licensed Software is likely to become the subject of Infringement, Contractor may at its option and expense: (a) procure for City the right to continue to use the Licensed Software as contemplated hereunder, (b) replace the Licensed Software with a non-infringing, functionally equivalent substitute Licensed Software, or (c) suitably modify the Licensed Software to make its use hereunder non-infringing while retaining functional equivalency to the unmodified version of the Licensed Software. If none of these options is reasonably available to Contractor, then the Agreement may be terminated at the option of either Party hereto and Contractor shall refund to City all amounts paid under this Agreement for the license of such infringing Licensed Software. Any unauthorized modification or attempted modification of the Licensed Software by City or any failure by City to implement any improvements or updates to the Licensed Software, as supplied by Contractor, shall void this indemnity unless City has obtained prior written authorization from Contractor permitting such modification, attempted modification or failure to implement. Contractor shall have no liability for any claim of Infringement based on City’s use or combination of the Licensed Software with products or data of the type for which the Licensed Software was neither designed nor intended to be used.

  • Claim of Infringement In the event that use of any facilities or equipment (including software), becomes, or in the reasonable judgment of the Party who owns the affected network is likely to become, the subject of a claim, action, suit, or proceeding based on intellectual property infringement, then said Party shall promptly and at its sole expense and sole option, but subject to the limitations of liability set forth below: 9.4.1 modify or replace the applicable facilities or equipment (including software) while maintaining form and function, or 9.4.2 obtain a license sufficient to allow such use to continue. 9.4.3 In the event 9.4.1 or 9.4.2 are commercially unreasonable, then said Party may, terminate, upon reasonable notice, this contract with respect to use of, or services provided through use of, the affected facilities or equipment (including software), but solely to the extent required to avoid the infringement claim.

  • Liabilities for Breach of Contract 11.1 The Parties agree and acknowledge that, if any Party (“Defaulting Party”) is materially in breach of any provision of this Agreement, or materially fails to perform or delays in performing any of its obligations hereunder, such breach, failure or delay shall constitute a default hereunder (the “Default”), and the non-defaulting Party shall be entitled to demand the Defaulting Party to rectify such Default or take remedial actions within a reasonable period of time. If the Defaulting Party fails to rectify such Default or take remedial actions within such reasonable period of time or ten (10) days from the receipt of the written notice from the non-defaulting Party requiring such rectification, the non-defaulting Party shall be entitled to make a decision at its sole discretion: 11.1.1 the WFOE shall be entitled to terminate this Agreement and claim from the Defaulting Party for damages if the Defaulting Party is any of the Existing Shareholders or the Company; 11.1.2 the non-defaulting Party shall be entitled to claim from the Defaulting Party for damages if the Defaulting party is the WFOE, provided that under no circumstances shall the Non-defaulting Party be entitled to terminate or rescind this Agreement unless otherwise provided by laws. 11.2 Notwithstanding anything to the contrary in this Agreement, this Article shall survive the termination of this Agreement.

  • Infringement (a) For Xxxxxx Products, only, and subject to the limitations of liability stated in Section 13, Xxxxxx agrees to: (1) defend any suit or proceeding against Customer, insofar as it is based on a claim or action by third parties alleging that a Xxxxxx Product delivered to Customer directly infringes a U.S. trademark, copyright, mask works right or patent of a third party, and (2) pay all damages and costs, including legal fees, which may be assessed against Customer in such action that are attributable to such claim; provided, however, that Customer shall give Xxxxxx prompt notice, in writing, of all such claims or actions instituted against it, and an opportunity to elect to take over, settle or defend the same through counsel of Xxxxxx’ own choice and under Xxxxxx’ sole discretion and at Xxxxxx’ own expense, and will make available to Xxxxxx in the event of such election, all defenses against such claims or actions, known or available to Customer. If a Xxxxxx Product become (or in Xxxxxx’ reasonable opinion is likely to become) the subject of any such action or claim, Xxxxxx shall, at its option and expense, pursue one or more of the following options: (i) Procure for Customer the right to continue using such Xxxxxx Product; or (ii) Replace or modify such Xxxxxx Product so that it becomes non-infringing while providing equivalent performance; or (iii) Grant a refund for the payments made by Customer to Xxxxxx for all units of such Xxxxxx Product then in Customer’s possession (upon Xxxxxx’ receipt of such units within ninety (90) days after notifying Customer of the granting of such refund), and terminate this Agreement with respect to such Xxxxxx Product. Notwithstanding the above, Xxxxxx shall not be obligated to indemnify or hold harmless Customer if the alleged infringement arises out of : (1) any combination of Xxxxxx Products with products not supplied or approved in writing by Xxxxxx, where such infringement would not have occurred but for such combination; (2) the modification or customization of Xxxxxx Products not performed by Xxxxxx, where such infringement would not have occurred but for such modification or customization; (3) the use of a Xxxxxx Product in an application for which it was not designed or intended, where such infringement would not have occurred but for such use; (4) a claim based on intellectual property rights owned by Customer or any of companies controlled by, controlling or under common control with Customer; or (5) where the Xxxxxx Products were designed by Xxxxxx to Customer’s specification. Contributory infringement is specifically excluded from this indemnity. (a) states Customer’s sole and exclusive remedy in the event that a Xxxxxx Product infringes on the intellectual property right of any third party. (b) In the event a claim is based partially on an indemnified claim described in Article 11(a) above and partially on a non-indemnified claim , any payments and reasonable attorney fees incurred in connection with such claims are to be apportioned between the parties in accordance with the degree of cause attributable to each party. (c) Obligations related to Third Party Products are expressly excluded from Xxxxxx’ obligations to Customer under this Section 11.

  • Non-Infringement To the knowledge of the Company, there is no unauthorized use, unauthorized disclosure, infringement or misappropriation of any Company-Owned Intellectual Property by any third party. The Company has not brought any Legal Proceeding for infringement or misappropriation of any Company-Owned Intellectual Property. The Company does not have any Liability for infringement or misappropriation of any Third-Party Intellectual Property. The operation of the Business, including (i) the design, development, manufacturing, reproduction, marketing, licensing, sale, offer for sale, importation, distribution, provision and/or use of any Company Product and/or Company-Owned Intellectual Property and (ii) the Company’s import or use of any product, device, process or service used in the Business as previously conducted and currently conducted by the Company and any product, device, process or service currently in development by the Company, has not, does not, and will not infringe (directly or indirectly, including via contribution or inducement), misappropriate or violate any Third-Party Intellectual Property, breach any terms of service, click-through agreement or any other agreement (including any rules or policies incorporated into any terms of service, click-through agreement or any other agreement legally binding the Company) applicable to use of such Third-Party Intellectual Property, and does not constitute unfair competition or unfair trade practices under the Applicable Law of any jurisdiction in which the Company conducts the Business or in which Company Products are imported, manufactured, marketed, distributed, used, licensed or sold and there is no basis for any such claims. The Company has not been sued in any Legal Proceeding or received any written communications (including any third-party reports by users) alleging that the Company has infringed, misappropriated, or violated or, by conducting the Business, would infringe, misappropriate, or violate any Intellectual Property of any other Person or entity. No Company-Owned Intellectual Property or Company Product is subject to any Legal Proceeding, Order, or settlement agreement that restricts in any manner the use, transfer or licensing thereof by the Company, or that may affect the validity, use or enforceability of any Company Intellectual Property. The Company has not sought or received any opinion of counsel regarding any actual or potential infringement or misappropriation of any Third-Party Intellectual Property arising from or relating to design, development, manufacturing, reproduction, marketing, licensing, sale, offer for sale, importation, distribution, provision and/or use of any Company Product or Company-Owned Intellectual Property or the operation of the Business, as previously or currently conducted, or as currently proposed to be conducted.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!