Common use of Non-Price Proposal Binder Clause in Contracts

Non-Price Proposal Binder. 4 (1 original and 3 copies) copies of the non-price proposal. With the non-price proposal, submit the following: a. Identify the company names, CAGE Code, and Entity Identifier for all team members and identify their role (prime, joint venture partner, significant subcontractor, subcontractor, etc.). b. Submit all Non-Price factor requirements divided. Each Non-Price factor must have an individual tab divider. c. Submit two copies of the entire Non-Price Proposal on CD in readable/searchable electronic format and filed inside the cover of the "Original" hard copy Non-Price Proposal binder. Acceptable readable/searchable formats include Word, Excel, and searchable PDF. Note: do NOT submit a USB flash/jump drive in lieu of CD. For the JL-1 Attachment, ensure data is submitted in hard copy and in Excel (Microsoft Office Version 2016 compatible) format on the above mentioned CD. In the event of a discrepancy between the JL-1 Attachment hard copies and the JL-1 Attachment electronic copies, the JL-1 Attachment electronic copies will take precedence. For the remainder of the Non-Price Proposal, in the event of a discrepancy between the hard copies and the electronic copies, the Non-Price proposal hard copies will take precedence. d. State a clear acknowledgement within the beginning of the binder that nothing in the following proposal is meant to supersede or reduce any of the individual requirements to which the offer addresses. It is the Government’s intent to incorporate the offeror’s proposal into the final contract while at the same time eliminating any contradictory or conflicting requirements between the two. In the event of a conflict between any part or parts of the offer and part or parts of the requirement, the government has the right to selectively choose that part or those parts which are the more advantageous of the two. e. Paper should be white, 8 ½ by 11 inches and have margins of 1 inch on all four sides. NOTE: Margins in forms and attachments provided by the Government are exempt from the margin size requirement and shall be submitted in the format provided. All text (including text in all graphics, exhibits, tables, and headers/footers) will be in a font no smaller than 11 point, Times New Roman or Courier. Colored font may be used for headers/footers, section headings, and subheadings only; all other text will be black. Double-side printing is permitted; however, each side will be counted as one page. f. Foldouts are permitted only for the organization charts and Xxxxx charts for phase-in/out schedules. Foldouts are limited to 11 by 17 inch white paper that must be folded to fit within the binder, with printing on one side only. 11 by 17 foldouts are considered one page; g. Offerors shall put company name on every Non-Price page. h. The non-price proposal submittal shall not exceed 100 pages. Blank tab dividers, Past Performance Questionnaires, and Contractor Performance Assessment Reports will not count toward the page limitation.

Non-Price Proposal Binder. 4 (1 original and 3 copies) copies of the non-price proposal. With the non-non- price proposal, submit the following: a. Identify the company names, CAGE Code, and Entity Identifier for all team members and identify their role (prime, joint venture partner, significant subcontractor, subcontractor, etc.).; b. Submit all Non-Price factor requirements divided. Each Non-Price factor must have an individual tab divider.; c. Submit two copies of the entire Non-Price Proposal on CD in readable/searchable electronic format and filed inside the cover of the "Original" hard copy Non-Price Proposal binder. Acceptable readable/searchable formats include Word, Excel, and searchable PDF. Note: do NOT submit a USB flash/jump drive in lieu of CD. For the JL-1 Attachment, ensure data is submitted in hard copy and in Excel (Microsoft Office Version 2016 compatible) format on the above mentioned CD. In the event of a discrepancy between the JL-1 Attachment hard copies and the JL-1 Attachment electronic copies, the JL-1 Attachment electronic copies will take precedence. For the remainder of the Non-Price Proposal, in the event of a discrepancy between the hard copies and the electronic copies, the Non-Price proposal hard copies will take precedence. d. State a clear acknowledgement within the beginning of the binder that nothing in the following proposal is meant to supersede or reduce any of the individual requirements to which the offer addresses. It is the Government’s intent to incorporate the offeror’s proposal into the final contract while at the same time eliminating any contradictory or conflicting requirements between the two. In the event of a conflict between any part or parts of the offer and part or parts of the requirement, the government has the right to selectively choose that part or those parts which are the more advantageous of the two. e. The non-price proposal submittal shall not exceed 90 pages. Blank tab dividers are excluded from the page limitation. Past Performance Questionnaires and Contractor Performance Assessment Reports will not count toward the page limitation. f. Offerors shall put company name on every Non-Price page. Paper should will be white, 8 ½ by 11 inches and have margins of 1 inch on all four sides. NOTE: Margins in forms and attachments provided by the Government are exempt from the margin size requirement and shall be submitted in the format provided. All text Text (including text in all graphics, exhibits, exhibits and tables, and headers/footers) will be in black using a font no smaller than 11 point, Times New Roman or Courier. Colored font may be used for headers/footers, section headings, and subheadings only; all other text will be blacksubheadings. Double-side printing is permittedallowed; however, however each side will be counted as one page. f. g. Foldouts are only permitted only for the organization charts and Xxxxx charts for phase-in/out schedules. Foldouts are limited to 11 by 17 inch white paper that must be folded to fit within the 3-ring D-binder, with printing on one side only. 11 by 17 foldouts are considered one page; g. Offerors shall put company name on every Non-Price page. h. The non-price proposal submittal shall not exceed 100 pages. Blank tab dividersText will be black using a font no smaller than 11 point and single line spacing, Past Performance Questionnaires, and Contractor Performance Assessment Reports will not count toward the page limitationTimes New Roman or Courier.

Non-Price Proposal Binder. 4 (1 original and 3 copies) copies and 2 electronic copies of the non-non- price proposal. With the non-price proposal, submit the following: a. Identify the company names, CAGE Code, and Entity Identifier for all team members and identify their role (prime, joint venture partner, significant subcontractor, subcontractor, etc.).; b. Submit all Non-Price factor requirements divided. Each Non-Price factor must have an individual tab divider.; c. Submit two electronic copies of the entire Non-Price Proposal on CD in readable/searchable electronic format and filed inside the cover of the "Original" hard copy Non-Price Proposal binder. Acceptable readable/searchable formats include Word, Excel, and searchable PDF. Note: do NOT submit a USB flash/jump drive in lieu of CD. For the JL-1 JB-1 Attachment, ensure data is submitted in hard copy and in Excel (Microsoft Office Version 2016 compatible) format on the above mentioned CD. In the event of a discrepancy between the JL-1 JB-1 Attachment hard copies and the JL-1 JB-1 Attachment electronic copies, the JL-1 JB-1 Attachment electronic copies will take precedence. For the remainder of the Non-Price Proposal, in the event of a discrepancy between the hard copies and the electronic copies, the Non-Price proposal hard copies will take precedence. d. State a clear acknowledgement within the beginning of the binder that nothing in the following proposal is meant to supersede or reduce any of the individual requirements to which the offer addresses. It is the Government’s intent to incorporate the offeror’s proposal into the final contract while at the same time eliminating any contradictory or conflicting requirements between the two. In the event of a conflict between any part or parts of the offer and part or parts of the requirement, the government has the right to selectively choose that part or those parts which are the more advantageous of the two. e. Paper should be white, 8 ½ by 11 inches and have margins of 1 inch on all four sides. NOTE: Margins in forms and attachments provided by the Government are exempt from the margin size requirement and shall be submitted in the format provided. All text (including text in all graphics, exhibits, tables, and headers/footers) will be in a font no smaller than 11 point, Times New Roman or Courier, with single line spacing. Colored font may be used for headers/footers, section headings, and subheadings only; all other text will be black. Double-Double- side printing is permitted; however, each side will be counted as one page.; f. Foldouts are permitted only for the organization charts and Xxxxx charts for phase-in/out schedulescharts. Foldouts are limited to 11 by 17 inch white paper that must be folded to fit within the binder, with printing on one side only. 11 by 17 foldouts are considered one page; g. Offerors shall put company name on every Non-Price page. h. The non-price proposal submittal shall not exceed 100 pages. Blank tab dividers, Past Performance Questionnaires, and Contractor Performance Assessment Reports will not count toward the page limitation.

Non-Price Proposal Binder. 4 (1 original and 3 copies) copies of the non-price proposal. With the non-price proposal, submit the following: a. Identify the company names, CAGE Code, and Entity Identifier for all team members and identify their role (prime, joint venture partner, significant subcontractor, subcontractor, etc.).; b. Submit all Non-Price factor requirements divided. Each Non-Price factor must have an individual tab divider.; c. Submit two copies of the entire Non-Price Proposal in one Adobe PDF file on CD in readable/searchable electronic format and filed inside the cover of the "Original" hard copy Non-Price Proposal binder. Acceptable readable/searchable formats include Word, Excel, and searchable PDF. Note: do Do NOT submit a USB flash/jump drive in lieu of CD. For the JL-1 Attachment, ensure data is submitted in hard copy and in copy, Excel (Microsoft Office Version 2016 compatible) format ), and Adobe PDF formats on the above mentioned CD. In the event of a discrepancy between the JL-1 Attachment hard copies and the JL-1 Attachment electronic copies, the JL-1 Attachment electronic copies will take precedence. For the remainder of the Non-Price Proposal, in the event of a discrepancy between the hard copies and the electronic copies, the Non-Price proposal hard copies will take precedence. d. State a clear acknowledgement within the beginning of the binder that nothing in the following proposal is meant to supersede or reduce any of the individual requirements to which the offer addresses. It is the Government’s intent to incorporate the offeror’s proposal into the final contract while at the same time eliminating any contradictory or conflicting requirements between the two. In the event of a conflict between any part or parts of the offer and part or parts of the requirement, the government has the right to selectively choose that part or those parts which are the more advantageous of the two. e. Paper should be white, 8 ½ by 11 inches and have margins of 1 inch on all four sides. NOTE: Margins in forms and attachments provided by the Government are exempt from the margin size requirement and shall be submitted in the format provided. All text (including text in all graphics, exhibits, tables, and headers/footers) will be in a font no smaller than 11 point, Times New Roman or Courier, with single line spacing. Colored font may be used for headers/footers, section headings, and subheadings only; all other text will be black. Double-Double- side printing is permitted; however, each side will be counted as one page.; f. Foldouts are permitted only for the organization charts and Xxxxx charts for phase-in/out schedulescharts. Foldouts are limited to 11 by 17 inch white paper that must be folded to fit within the binder, with printing on one side only. 11 by 17 foldouts are considered one page; g. Offerors shall put company name on every Non-Price page. h. The non-price proposal submittal shall not exceed 100 pages. Blank tab dividers, Past Performance Questionnaires, and Contractor Performance Assessment Reports will not count toward the page limitation.

Non-Price Proposal Binder. 4 6 (1 original and 3 5 copies) copies of the non-price proposal. With the non-price proposal, submit the following: a. Identify the company names, CAGE Code, and Entity Identifier for all team members and identify their role (prime, joint venture partner, significant subcontractor, subcontractor, etc.).; b. Submit all Non-Price factor Factor 1, 2, 3, and 5 requirements divided. Each Non-Price factor must have an individual tab divider.. NOTE: The Non-Price Factor 4 submittal requirements and Small Business Subcontracting Plan (if applicable) shall be submitted in the Price Proposal ONLY and shall not be included in the Non-Price Proposal; c. Submit two copies of the entire Non-Price Proposal on CD in readable/searchable electronic format and filed inside the cover of the "Original" hard copy Non-Price Proposal binder. Acceptable readable/searchable formats include Word, Excel, and searchable PDF. Note: do NOT submit a USB flash/jump drive in lieu of CD. For the JL-1 Attachment, ensure data is submitted in hard copy and in Excel (Microsoft Office Version 2016 compatible) format on the above mentioned CD. In the event of a discrepancy between the JL-1 Attachment hard copies and the JL-1 Attachment electronic copies, the JL-1 Attachment electronic copies will take precedence. For the remainder of the Non-Price Proposal, in the event of a discrepancy between the hard copies and the electronic copies, the Non-Price proposal hard copies will take precedence. d. State a clear acknowledgement within the beginning of the binder that nothing in the following proposal is meant to supersede or reduce any of the individual requirements to which the offer addresses. It is the Government’s intent to incorporate the offeror’s proposal into the final contract while at the same time eliminating any contradictory or conflicting requirements between the two. In the event of a conflict between any part or parts of the offer and part or parts of the requirement, the government Government has the right to selectively choose that part or those parts which are the more advantageous of the two. e. Paper should be white, 8 ½ by 11 inches and have margins of 1 inch on all four sides. NOTE: Margins in forms and attachments provided by the Government are exempt from the margin size requirement and shall be submitted in the format provided. All text (including text in all graphics, exhibits, tables, and headers/footers) will be in a font no smaller than 11 point, Times New Roman or Courier, with single line spacing. Colored font may be used for headers/footers, section headings, and subheadings only; all other text will be black. Double-Double- side printing is permitted; however, each side will be counted as one page. f. Foldouts are permitted only for the organization charts and Xxxxx charts for phase-in/out schedules. Foldouts are limited to 11 by 17 inch white paper that must be folded to fit within the binder, with printing on one side only. 11 by 17 foldouts are considered one page; g. Offerors shall put company name on every Non-Price page. h. g. The non-price proposal submittal shall not exceed 100 150 pages. Blank tab dividers, Past Performance Questionnaires, and Contractor Performance Assessment Reports will not count toward the page limitation.