Non-Standard Parts. If the Product contains a part not readily available in the marketplace, VENDOR shall make such part available to GTECH in accordance with Section 11.4.
Non-Standard Parts Sample Clauses
Related to Non-Standard Parts
Standard Provisions Without limiting any of the other obligations or liabilities of the Contractor, the Contractor shall provide and maintain until the contracted work has been completed and accepted by the City of Xxxxxx, Owner, the minimum insurance coverage as indicated hereinafter. Contractor shall file with the Purchasing Department satisfactory certificates of insurance including any applicable addendum or endorsements, containing the contract number and title of the project. Contractor may, upon written request to the Purchasing Department, ask for clarification of any insurance requirements at any time; however, Contractor shall not commence any work or deliver any material until he or she receives notification that the contract has been accepted, approved, and signed by the City of Xxxxxx. All insurance policies proposed or obtained in satisfaction of these requirements shall comply with the following general specifications, and shall be maintained in compliance with these general specifications throughout the duration of the Contract, or longer, if so noted:
Reformulation Standard “Reformulated Products” shall mean Products that contain concentrations less than or equal to 0.1% (1,000 parts per million (ppm)) of DEHP when analyzed pursuant to U.S. Environmental Protection Agency testing methodologies 3580A and 8270C or other methodology utilized by federal or state government agencies for the purpose of determining the phthalate content in a solid substance.
PARKING RULES AND REGULATIONS The following rules and regulations govern the use of the parking facilities which serve the Building. Tenant will be bound by such rules and regulations and agrees to cause its employees, subtenants, assignees, contractors, suppliers, customers and invitees to observe the same: 1. Tenant will not permit or allow any vehicles that belong to or are controlled by Tenant or Tenant’s employees, subtenants, customers or invitees to be loaded, unloaded or parked in areas other than those designated by Landlord for such activities. No vehicles are to be left in the parking areas overnight and no vehicles are to be parked in the parking areas other than normally sized passenger automobiles, motorcycles and pick-up trucks. No extended term storage of vehicles is permitted. 2. Vehicles must be parked entirely within painted stall lines of a single parking stall. 3. All directional signs and arrows must be observed. 4. The speed limit within all parking areas shall be five (5) miles per hour. 5. Parking is prohibited: (a) in areas not striped for parking; (b) in aisles or on ramps; (c) where “no parking” signs are posted; (d) in cross-hatched areas; and (e) in such other areas as may be designated from time to time by Landlord or Landlord’s parking operator. 6. Landlord reserves the right, without cost or liability to Landlord, to tow any vehicle if such vehicle’s audio theft alarm system remains engaged for an unreasonable period of time. 7. Washing, waxing, cleaning or servicing of any vehicle in any area not specifically reserved for such purpose is prohibited. 8. Landlord may refuse to permit any person to park in the parking facilities who violates these rules with unreasonable frequency, and any violation of these rules shall subject the violator’s car to removal, at such car owner’s expense. Tenant agrees to use its best efforts to acquaint its employees, subtenants, assignees, contractors, suppliers, customers and invitees with these parking provisions, rules and regulations. 9. Parking stickers, access cards, or any other device or form of identification supplied by Landlord as a condition of use of the parking facilities shall remain the property of Landlord. Parking identification devices, if utilized by Landlord, must be displayed as requested and may not be mutilated in any manner. The serial number of the parking identification device may not be obliterated. Parking identification devices, if any, are not transferable and any device in the possession of an unauthorized holder will be void. Landlord reserves the right to refuse the sale of monthly stickers or other parking identification devices to Tenant or any of its agents, employees or representatives who willfully refuse to comply with these rules and regulations and all unposted city, state or federal ordinances, laws or agreements. 10. Loss or theft of parking identification devices or access cards must be reported to the management office in the Development immediately, and a lost or stolen report must be filed by the Tenant or user of such parking identification device or access card at the time. Landlord has the right to exclude any vehicle from the parking facilities that does not have a parking identification device or valid access card. Any parking identification device or access card which is reported lost or stolen and which is subsequently found in the possession of an unauthorized person will be confiscated and the illegal holder will be subject to prosecution. 11. All damage or loss claimed to be the responsibility of Landlord must be reported, itemized in writing and delivered to the management office located within the Development within ten (10) business days after any claimed damage or loss occurs. Any claim not so made is waived. Landlord is not responsible for damage by water or fire, or for the acts or omissions of others, or for articles left in vehicles. In any event, the total liability of Landlord, if any, is limited to Two Hundred Fifty Dollars ($250.00) for all damages or loss to any car. Landlord is not responsible for loss of use.
BUILDING RULES AND REGULATIONS The following rules and regulations shall apply, where applicable, to the Premises, the Building, the parking facilities (if any), the Property and the appurtenances. In the event of a conflict between the following rules and regulations and the remainder of the terms of the Lease, the remainder of the terms of the Lease shall control. Capitalized terms have the same meaning as defined in the Lease.
Construction Standards The Developer shall construct the Subdivision in accordance with the Subdivision Plan, as approved by the Planning Commission, and if applicable, the requirements of the Design Review Committee, and in accordance with the requirements of (a) the Millington Subdivision Regulations; (b) standards and specifications contained in “Local Public Works Standard, and Specifications”, as amended to include specific requirements for construction in Millington, TN; (c) the Building Code (as adopted by Shelby County); (d) the Fire Code (as adopted by Shelby County); (e) the Millington Zoning Ordinance; and (f) the applicable Ordinances of the City. Items (a) through (f) are hereby made a part of this Agreement by reference and are hereinafter referred to collectively as the “Codes”. References herein to the Codes are to those in effect on the Effective Date unless amendments are hereafter made which apply to all improvements or subdivisions regardless of their date of commencement and/or completion of construction. The Conditions of Approval established by the Planning Commission, and, as applicable, the Design Review Committee (any or all of which as may have been modified by the Board of Mayor and Aldermen) are set forth in Exhibit “A” to this Agreement and are incorporated herein by reference and made a part hereof.
Reformulation Standards A “reformulated” product (a) contains lead in concentrations that do not exceed 90 parts per million, equivalent to 0.009%, in any exterior parts analyzed pursuant to U.S. Environmental Protection Agency (EPA) methodologies 3050B and 6010B, or (b) yields a result of no more than 1.0 micrograms of lead when sampled according to NIOSH 9100 protocol and analyzed according to EPA 6010B. In addition to the above tests, the Settling Entity may use equivalent methods utilized by any California or federal agency to determine lead content in a solid substance or the amount of the bioavailability of the toxicant through a wipe test, respectively.
Common Areas - Rules and Regulations Lessor or such other person(s) as Lessor may appoint shall have the exclusive control and management of the Common Areas and shall have the right, from time to time, to establish, modify, amend and enforce reasonable rules and regulations (“Rules and Regulations”) for the management, safety, care, and cleanliness of the grounds, the parking and unloading of vehicles and the preservation of good order, as well as for the convenience of other occupants or tenants of the Building and the Project and their invitees. Lessee agrees to abide by and conform to all such Rules and Regulations, and to cause its employees, suppliers, shippers, customers, contractors and invitees to so abide and conform. Lessor shall not be responsible to Lessee for the non-compliance with said Rules and Regulations by other tenants of the Project.
CLOUD SPECIFIC TERMS AND CONDITIONS To the extent that Contractor has received an award for Lot 3, Cloud, the following terms and conditions apply to Lot 3, Cloud. For the duration of an Authorized User Agreement, the Cloud Solution shall conform to the Cloud Solution Manufacturer’s specifications, Documentation, performance standards (including applicable license duration, warranties, guarantees, Service Level Agreements, service commitments, and credits). Contractor is responsible for providing physical and logical security for all Data, infrastructure (e.g. hardware, networking components, physical devices), and software related to the services the Contractor is providing under the Authorized User Agreement. All Data security provisions agreed to by the Authorized User and Contractor within the Authorized User Agreement may not be diminished for the duration of the Authorized User Agreement without prior written agreement by the parties amending the Authorized User Agreement.
PROPRIETARY/RESTRICTIVE SPECIFICATIONS If a prospective bidder considers the specification contained herein to be proprietary or restrictive in nature, thus potentially resulting in reduced competition, they are urged to contact the Procurement Division prior to bid opening. Specifications which are unrelated to performance will be considered for deletion via addendum to this Invitation for Bids.
Standard Terms and Conditions Executive expressly understands and acknowledges that the Standard Terms and Conditions attached hereto are incorporated herein by reference, deemed a part of this Agreement and are binding and enforceable provisions of this Agreement. References to “this Agreement” or the use of the term “hereof” shall refer to this Agreement and the Standard Terms and Conditions attached hereto, taken as a whole.
