Common use of NRE and Tooling Clause in Contracts

NRE and Tooling. 13.1 Supplier shall quote the life of any new Tools prior to these Tools being manufactured. This will be expressed as the number of parts capable of being produced by the Tooling. Supplier will be responsible for the maintenance and replacement of all Tooling where damage is caused to the Tooling by the acts or omissions of Supplier in not undertaking due care, maintenance and attention to the Tooling, negligence or wilful misconduct of Supplier. Supplier shall transfer to the Buyer any transferable warranties on tooling. 13.2 Unless otherwise agreed between the Parties for extraordinary NRE costs (which will be discussed by the Parties), all NRE Item costs will be amortised into the Base Price over a 12- month period. 13.3 Full NRE Item costs for each Product will be quoted using the Buyer’s Bid Template documents. 13.4 The amortization quantity should be clearly documented on the Buyer’s Bid Template. Once the total amortization quantity for each Product has been delivered, Supplier shall subtract the amortization amount from the Base Price and establish a new Base Price for subsequent deliveries. 13.5 Lead times for all tooling are to be quoted by Supplier and accompanied by a detailed timing plan. 13.6 Supplier shall be responsible for the routine maintenance, storage, repair, usage and calibration (if calibration or other specialist requirements are required outside of routine maintenance, repair or usage and not caused by a lack of care or damage by Supplier, then such costs shall be agreed in advance and paid for separately by the Buyer) of all the Buyer furnished, Government furnished and or Government funded equipment tooling, test rigs, rigs and fixtures and/or test stands and Buyer acquired NRE Items in Supplier’s possession for performance of this Agreement. Equipment not owned by Supplier which requires a National Institute of Standards and Technology traceable certificate of calibration will be quoted and submitted to the Buyer for approval prior to submitting equipment to third Party calibration. Supplier will track and file calibration certificates and schedules. 13.7 Supplier shall be responsible for the maintenance and replacement of all NRE Items within their useful life, fair wear and tear excepted. The Buyer shall have an option at any time, which shall be exercised by written notice to Supplier, to pay not more that the balance of the outstanding NRE Item cost for its outright ownership. In this event, Supplier shall subtract the amortisation amount from the Base Price and establish a new Base Price for subsequent deliveries.

NRE and Tooling. 13.1 Supplier shall quote the life of any new Tools prior to these Tools being manufactured. This will be expressed as the number of parts capable of being produced by the Tooling. Supplier will be responsible for the maintenance and replacement of all Tooling where damage is caused to the Tooling by the acts or omissions of Supplier in not undertaking due care, maintenance and attention to the Tooling, negligence or wilful misconduct of Supplier. Supplier shall transfer to the Buyer any transferable warranties on tooling. 13.2 Unless otherwise agreed between the Parties for extraordinary NRE costs (which will be discussed by the Parties), all NRE Item costs will be amortised into the Base Price over a 12- 12-month period. 13.3 Full NRE Item costs for each Product will be quoted using the Buyer’s Bid Template documents. 13.4 The amortization quantity should be clearly documented on the Buyer’s Bid Template. Once the total amortization quantity for each Product has been delivered, Supplier shall subtract the amortization amount from the Base Price and establish a new Base Price for subsequent deliveries. 13.5 Lead times for all tooling are to be quoted by Supplier and accompanied by a detailed timing plan. 13.6 Supplier shall be responsible for the routine maintenance, storage, repair, usage and calibration (if calibration or other specialist requirements are required outside of routine maintenance, repair or usage and not caused by a lack of care or damage by Supplier, then such costs shall be agreed in advance and paid for separately by the Buyer) of all the Buyer furnished, Government furnished and or Government funded equipment tooling, test rigs, rigs and fixtures and/or test stands and Buyer acquired NRE Items in Supplier’s possession for performance of this Agreement. Equipment not owned by Supplier which requires a National Institute of Standards and Technology traceable certificate of calibration will be quoted and submitted to the Buyer for approval prior to submitting equipment to third Party calibration. Supplier will track and file calibration certificates and schedules. 13.7 Supplier shall be responsible for the maintenance and replacement of all NRE Items within their useful life, fair wear and tear excepted. The Buyer shall have an option at any time, which shall be exercised by written notice to Supplier, to pay not more that the balance of the outstanding NRE Item cost for its outright ownership. In this event, Supplier shall subtract the amortisation amount from the Base Price and establish a new Base Price for subsequent deliveries.

NRE and Tooling. 13.1 14.1. Supplier shall quote the life of any new Tools prior to these Tools being manufactured. This will be expressed as the number of parts capable of being produced by the Tooling. Supplier will be responsible for the maintenance and replacement of all Tooling where damage is caused to the Tooling by the acts or omissions of Supplier in not undertaking due care, maintenance and attention to the Tooling, negligence or wilful willful misconduct of Supplier. Supplier shall transfer to the Buyer any transferable warranties on tooling. 13.2 14.2. Unless otherwise agreed between the Parties for extraordinary NRE costs (which will be discussed by the Parties), all NRE Item costs will be amortised amortized into the Base Price over a 12- 12-month period. 13.3 14.3. Full NRE Item costs for each Product will be quoted using the Buyer’s Bid Template documents. 13.4 14.4. The amortization quantity should be clearly documented on the Buyer’s Bid Template. Once the total amortization quantity for each Product has been delivered, Supplier shall subtract the amortization amount from the Base Price and establish a new Base Price for subsequent deliveries. 13.5 14.5. Lead times for all tooling are to be quoted by Supplier and accompanied by a detailed timing plan. 13.6 14.6. Supplier shall be responsible for the routine maintenance, storage, repair, usage and calibration (if calibration or other specialist requirements are required outside of routine maintenance, repair or usage and not caused by a lack of care or damage by Supplier, then such costs shall be agreed in advance and paid for separately by the Buyer) of all the Buyer furnished, Government furnished and or Government funded equipment tooling, test rigs, rigs and fixtures and/or test stands and Buyer acquired NRE Items in Supplier’s possession for performance of this Agreement. Equipment not owned by Supplier which requires a National Institute of Standards and Technology traceable certificate of calibration will be quoted and submitted to the Buyer for approval prior to submitting equipment to third Party calibration. Supplier will track and file calibration certificates and schedules. 13.7 14.7. Supplier shall be responsible for the maintenance and replacement of all NRE Items within their useful life, fair wear and tear excepted. The Buyer shall have an option at any time, which shall be exercised by written notice to Supplier, to pay not more that the balance of the outstanding NRE Item cost for its outright ownership. In this event, Supplier shall subtract the amortisation amortization amount from the Base Price and establish a new Base Price for subsequent deliveries.

NRE and Tooling. 13.1 14.1 Supplier shall quote the life of any new Tools prior to these Tools being manufactured. This will be expressed as the number of parts capable of being produced by the Tooling. Supplier will be responsible for the maintenance and replacement of all Tooling where damage is caused to the Tooling by the acts or omissions of Supplier in not undertaking due care, maintenance and attention to the Tooling, negligence or wilful willful misconduct of Supplier. Supplier shall transfer to the Buyer any transferable warranties on tooling. 13.2 14.2 Unless otherwise agreed between the Parties for extraordinary NRE costs (which will be discussed by the Parties), all NRE Item costs will be amortised amortized into the Base Price over a 12- 12-month period. 13.3 14.3 Full NRE Item costs for each Product will be quoted using the Buyer’s Bid Template documents. 13.4 14.4 The amortization quantity should be clearly documented on the Buyer’s Bid Template. Once the total amortization quantity for each Product has been delivered, Supplier shall subtract the amortization amount from the Base Price and establish a new Base Price for subsequent deliveries. 13.5 14.5 Lead times for all tooling are to be quoted by Supplier and accompanied by a detailed timing plan. 13.6 14.6 Supplier shall be responsible for the routine maintenance, storage, repair, usage and calibration (if calibration or other specialist requirements are required outside of routine maintenance, repair or usage and not caused by a lack of care or damage by Supplier, then such costs shall be agreed in advance and paid for separately by the Buyer) of all the Buyer furnished, Government furnished and or Government funded equipment tooling, test rigs, rigs and fixtures and/or test stands and Buyer acquired NRE Items in Supplier’s possession for performance of this Agreement. Equipment not owned by Supplier which requires a National Institute of Standards and Technology traceable certificate of calibration will be quoted and submitted to the Buyer for approval prior to submitting equipment to third Party calibration. Supplier will track and file calibration certificates and schedules. 13.7 14.7 Supplier shall be responsible for the maintenance and replacement of all NRE Items within their useful life, fair wear and tear excepted. The Buyer shall have an option at any time, which shall be exercised by written notice to Supplier, to pay not more that the balance of the outstanding NRE Item cost for its outright ownership. In this event, Supplier shall subtract the amortisation amortization amount from the Base Price and establish a new Base Price for subsequent deliveries.

NRE and Tooling. 13.1 16.1 Any Tools or Tooling purchased from Supplier or manufactured by Supplier, the cost of which forms part of an Order, will become the property of Buyer and all rights, title and interest in and to any part of Tooling will pass to Buyer as soon as it is acquired or fabricated in accordance with the Order. 16.2 Supplier shall quote the life of any new Tools prior to these Tools being manufactured. This will be expressed as the number of parts capable of being produced by the Tooling. Supplier will be responsible for the calibration, maintenance and replacement of all Tooling where damage is caused to the Tooling by the acts or omissions of Supplier in not undertaking due care, maintenance and attention to the Tooling, negligence or wilful misconduct of Supplier. Supplier shall transfer to the Buyer any transferable warranties on toolingTooling. 13.2 16.3 Unless otherwise agreed between the Parties for extraordinary NRE costs (which will be discussed by the Parties), all NRE Item costs will be amortised into the Base Price over a 12- month periodPrice. 13.3 16.4 Full NRE Item costs for each Product all Works will be quoted using the Buyer’s Bid Template bid template documents. 13.4 16.5 The amortization quantity should be clearly documented on the Buyer’s Bid TemplateOrder. Once the total amortization quantity for each Product the Works has been delivered, Supplier shall subtract the amortization amount from the Base Price and establish a new Base Price for subsequent deliveries. 13.5 16.6 Lead times for all tooling Tooling are to be quoted by Supplier and accompanied by a detailed timing plan. 13.6 16.7 Supplier shall be responsible for the routine maintenance, storage, repair, usage usage, replacement (within their useful life, fair wear and tear excepted) and calibration (if of all Tooling and Buyer-acquired NRE Items in Supplier’s possession for performance of this Agreement. If calibration or other specialist requirements are required outside of routine maintenance, repair or usage and not caused by a lack of care or damage by Supplier, then such costs shall be agreed in advance and paid for separately by the Buyer) of all the Buyer furnished, Government furnished and or Government funded equipment tooling, test rigs, rigs and fixtures and/or test stands and Buyer acquired NRE Items in Supplier’s possession for performance of this Agreement. Equipment not owned by Supplier which requires a National Institute of Standards and Technology traceable certificate of calibration will be quoted and submitted to the Buyer for approval prior to submitting equipment to third Party party calibration. Supplier will track and file calibration certificates and schedules. 13.7 Supplier shall be responsible for the maintenance and replacement of all NRE Items within their useful life, fair wear and tear excepted. The 16.8 Buyer shall have an option at any time, which shall be exercised by written notice to Supplier, to pay not more that the balance of the outstanding NRE Item cost for its outright ownership. In this event, Supplier shall subtract the amortisation amount from the Base Price and establish a new Base Price for subsequent deliveries.

NRE and Tooling. 13.1 14.1 Supplier shall quote the life of any new Tools prior to these Tools being manufactured. This will be expressed as the number of parts capable of being produced by the Tooling. Supplier will be responsible for the maintenance and replacement of all Tooling where damage is caused to the Tooling by the acts or omissions of Supplier in not undertaking due care, maintenance and attention to the Tooling, negligence or wilful willful misconduct of Supplier. Supplier shall transfer to the Buyer any transferable warranties on tooling. 13.2 14.2 Unless otherwise agreed between the Parties for extraordinary NRE costs (which will be discussed by the Parties), all NRE Item costs will be amortised amortized into the Base Price over a 12- 12-month period. 13.3 14.3 Full NRE Item costs for each Product will be quoted using the Buyer’s Bid Template documents. 13.4 14.4 The amortization quantity should be clearly documented on the Buyer’s Bid Template. Once the total amortization quantity for each Product has been delivered, Supplier shall subtract the amortization amount from the Base Price and establish a new Base Price for subsequent deliveries.deliveries.‌ 13.5 14.5 Lead times for all tooling are to be quoted by Supplier and accompanied by a detailed timing plan. 13.6 14.6 Supplier shall be responsible for the routine maintenance, storage, repair, usage and calibration (if calibration or other specialist requirements are required outside of routine maintenance, repair or usage and not caused by a lack of care or damage by Supplier, then such costs shall be agreed in advance and paid for separately by the Buyer) of all the Buyer furnished, Government furnished and or Government funded equipment tooling, test rigs, rigs and fixtures and/or test stands and Buyer acquired NRE Items in Supplier’s possession for performance of this Agreement. Equipment not owned by Supplier which requires a National Institute of Standards and Technology traceable certificate of calibration will be quoted and submitted to the Buyer for approval prior to submitting equipment to third Party calibration. Supplier will track and file calibration certificates and schedules.schedules.‌ 13.7 14.7 Supplier shall be responsible for the maintenance and replacement of all NRE Items within their useful life, fair wear and tear excepted. The Buyer shall have an option at any time, which shall be exercised by written notice to Supplier, to pay not more that the balance of the outstanding NRE Item cost for its outright ownership. In this event, Supplier shall subtract the amortisation amortization amount from the Base Price and establish a new Base Price for subsequent deliveries.

NRE and Tooling. ‌ 13.1 Supplier shall quote the life of any new Tools prior to these Tools being manufactured. This will be expressed as the number of parts capable of being produced by the Tooling. Supplier will be responsible for the maintenance and replacement of all Tooling where damage is caused to the Tooling by the acts or omissions of Supplier in not undertaking due care, maintenance and attention to the Tooling, negligence or wilful misconduct of Supplier. Supplier shall transfer to the Buyer any transferable warranties on tooling. 13.2 Unless otherwise agreed between the Parties for extraordinary NRE costs (which will be discussed by the Parties), all NRE Item costs will be amortised into the Base Price over a 12- 12-month period. 13.3 Full NRE Item costs for each Product will be quoted using the Buyer’s Bid Template documents. 13.4 The amortization quantity should be clearly documented on the Buyer’s Bid Template. Once the total amortization quantity for each Product has been delivered, Supplier shall subtract the amortization amount from the Base Price and establish a new Base Price for subsequent deliveries. 13.5 Lead times for all tooling are to be quoted by Supplier and accompanied by a detailed timing plan. 13.6 Supplier shall be responsible for the routine maintenance, storage, repair, usage and calibration (if calibration or other specialist requirements are required outside of routine maintenance, repair or usage and not caused by a lack of care or damage by Supplier, then such costs shall be agreed in advance and paid for separately by the Buyer) of all the Buyer furnished, Government furnished and or Government funded equipment tooling, test rigs, rigs and fixtures and/or test stands and Buyer acquired NRE Items in Supplier’s possession for performance of this Agreement. Equipment not owned by Supplier which requires a National Institute of Standards and Technology traceable certificate of calibration will be quoted and submitted to the Buyer for approval prior to submitting equipment to third Party calibration. Supplier will track and file calibration certificates and schedules. 13.7 Supplier shall be responsible for the maintenance and replacement of all NRE Items within their useful life, fair wear and tear excepted. The Buyer shall have an option at any time, which shall be exercised by written notice to Supplier, to pay not more that the balance of the outstanding NRE Item cost for its outright ownership. In this event, Supplier shall subtract the amortisation amount from the Base Price and establish a new Base Price for subsequent deliveries.deliveries.‌

NRE and Tooling. 13.1 14.1 Supplier shall quote the life of any new Tools prior to these Tools being manufactured. This will be expressed as the number of parts capable of being produced by the Tooling. Supplier will be responsible for the maintenance and replacement of all Tooling where damage is caused to the Tooling by the acts or omissions of Supplier in not undertaking due care, maintenance and attention to the Tooling, negligence or wilful misconduct of Supplier. Supplier shall transfer to the Buyer any transferable warranties on tooling. 13.2 14.2 Unless otherwise agreed between the Parties for extraordinary NRE costs (which will be discussed by the Parties), all NRE Item costs will be amortised into the Base Price over a 12- 12-month period. 13.3 14.3 Full NRE Item costs for each Product will be quoted using the Buyer’s Bid Template documents. 13.4 14.4 The amortization quantity should be clearly documented on the Buyer’s Bid Template. Once the total amortization quantity for each Product has been delivered, Supplier shall subtract the amortization amount from the Base Price and establish a new Base Price for subsequent deliveries. 13.5 14.5 Lead times for all tooling are to be quoted by Supplier and accompanied by a detailed timing plan. 13.6 14.6 Supplier shall be responsible for the routine maintenance, storage, repair, usage and calibration (if calibration or other specialist requirements are required outside of routine maintenance, repair or usage and not caused by a lack of care or damage by Supplier, then such costs shall be agreed in advance and paid for separately by the Buyer) of all the Buyer furnished, Government furnished and or Government funded equipment tooling, test rigs, rigs and fixtures and/or test stands and Buyer acquired NRE Items in Supplier’s possession for performance of this Agreement. Equipment not owned by Supplier which requires a National Institute of Standards and Technology traceable certificate of calibration will be quoted and submitted to the Buyer for approval prior to submitting equipment to third Party calibration. Supplier will track and file calibration certificates and schedules. 13.7 14.7 Supplier shall be responsible for the maintenance and replacement of all NRE Items within their useful life, fair wear and tear excepted. The Buyer shall have an option at any time, which shall be exercised by written notice to Supplier, to pay not more that the balance of the outstanding NRE Item cost for its outright ownership. In this event, Supplier shall subtract the amortisation amount from the Base Price and establish a new Base Price for subsequent deliveries.

NRE and Tooling. 13.1 15.1 Any Tools or Tooling purchased from Supplier or manufactured by Supplier, the cost of which forms part of an Order will become the property of Buyer and all right, title and interest in and to any part of Tooling will pass to Buyer as soon as it is acquired or fabricated in accordance with the Order. 15.2 Supplier shall quote the life of any new Tools prior to these Tools being manufactured. This will be expressed as the number of parts capable of being produced by the Tooling. Supplier will be responsible for the maintenance calibration, maintenance, repair and replacement of all Tooling where damage is caused to the Tooling by the acts or omissions of Supplier in not undertaking due care, maintenance and attention to the Tooling, negligence or wilful misconduct of Supplier. Supplier shall transfer to the Buyer any transferable warranties on toolingTooling. 13.2 15.3 Unless otherwise agreed between the Parties for extraordinary NRE costs (which will be discussed by the Parties), all NRE Item costs will be amortised into the Base Price over a 12- 12-month period. 13.3 15.4 Full NRE Item costs for each Product all Works will be quoted using the Buyer’s Bid Template bid template documents. 13.4 15.5 The amortization quantity should be clearly documented on the Buyer’s Bid Templatebid template. Once the total amortization quantity for each Product the Works has been delivered, Supplier shall subtract the amortization amount from the Base Price and establish a new Base Price for subsequent deliveries. 13.5 15.6 Lead times for all tooling Tooling are to be quoted by Supplier and accompanied by a detailed timing plan. 13.6 15.7 Supplier shall be responsible for the routine maintenance, storage, repair, usage usage, replacement (within their useful life, fair wear and tear excepted) and calibration (if of all Tooling and Buyer acquired NRE Items in Supplier’s possession for performance of this Agreement. If calibration or other specialist requirements are required outside of routine maintenance, repair or usage and not caused by a lack of care or damage by Supplier, then such costs shall be agreed in advance and paid for separately by the Buyer) of all the Buyer furnished, Government furnished and or Government funded equipment tooling, test rigs, rigs and fixtures and/or test stands and Buyer acquired NRE Items in Supplier’s possession for performance of this Agreement. Equipment not owned by Supplier which requires a National Institute of Standards and Technology traceable certificate of calibration will be quoted and submitted to the Buyer for approval prior to submitting equipment to third Party party calibration. Supplier will track and file calibration certificates and schedules. 13.7 Supplier shall be responsible for the maintenance and replacement of all NRE Items within their useful life, fair wear and tear excepted. The 15.8 Buyer shall have an option at any time, which shall be exercised by written notice to Supplier, to pay not more that the balance of the outstanding NRE Item cost for its outright ownership. In this event, Supplier shall subtract the amortisation amount from the Base Price and establish a new Base Price for subsequent deliveries.

NRE and Tooling. 13.1 15.1 Any Tools or Tooling purchased from Supplier or manufactured by Supplier, the cost of which forms part of an Order will become the property of Buyer and all right, title and interest in and to any part of Tooling will pass to Buyer as soon as it is acquired or fabricated in accordance with the Order. 15.2 Supplier shall quote the life of any new Tools prior to these Tools being manufactured. This will be expressed as the number of parts capable of being produced by the Tooling. Supplier will be responsible for the maintenance calibration, maintenance, repair and replacement of all Tooling where damage is caused to the Tooling by the acts or omissions of Supplier in not undertaking due care, maintenance and attention to the Tooling, negligence or wilful misconduct of Supplier. Supplier shall transfer to the Buyer any transferable warranties on toolingTooling. 13.2 15.3 Unless otherwise agreed between the Parties for extraordinary NRE costs (which will be discussed by the Parties), all NRE Item costs will be amortised into the Base Price over a 12- 12-month period. 13.3 15.4 Full NRE Item costs for each Product all Works will be quoted using the Buyer’s Bid Template Buyer‟s bid template documents. 13.4 15.5 The amortization quantity should be clearly documented on the Buyer’s Bid TemplateBuyer‟s bid template. Once the total amortization quantity for each Product the Works has been delivered, Supplier shall subtract the amortization amount from the Base Price and establish a new Base Price for subsequent deliveries. 13.5 15.6 Lead times for all tooling Tooling are to be quoted by Supplier and accompanied by a detailed timing plan. 13.6 15.7 Supplier shall be responsible for the routine maintenance, storage, repair, usage usage, replacement (within their useful life, fair wear and tear excepted) and calibration (if of all Tooling and Buyer acquired NRE Items in Supplier‟s possession for performance of this Agreement. If calibration or other specialist requirements are required outside of routine maintenance, repair or usage and not caused by a lack of care or damage by Supplier, then such costs shall be agreed in advance and paid for separately by the Buyer) of all the Buyer furnished, Government furnished and or Government funded equipment tooling, test rigs, rigs and fixtures and/or test stands and Buyer acquired NRE Items in Supplier’s possession for performance of this Agreement. Equipment not owned by Supplier which requires a National Institute of Standards and Technology traceable certificate of calibration will be quoted and submitted to the Buyer for approval prior to submitting equipment to third Party party calibration. Supplier will track and file calibration certificates and schedules. 13.7 Supplier shall be responsible for the maintenance and replacement of all NRE Items within their useful life, fair wear and tear excepted. The 15.8 Buyer shall have an option at any time, which shall be exercised by written notice to Supplier, to pay not more that the balance of the outstanding NRE Item cost for its outright ownership. In this event, Supplier shall subtract the amortisation amount from the Base Price and establish a new Base Price for subsequent deliveries.

NRE and Tooling. ‌ 13.1 Supplier shall quote the life of any new Tools prior to these Tools being manufactured. This will be expressed as the number of parts capable of being produced by the Tooling. Supplier will be responsible for the maintenance and replacement of all Tooling where damage is caused to the Tooling by the acts or omissions of Supplier in not undertaking due care, maintenance and attention to the Tooling, negligence or wilful misconduct of Supplier. Supplier shall transfer to the Buyer any transferable warranties on tooling. 13.2 Unless otherwise agreed between the Parties for extraordinary NRE costs (which will be discussed by the Parties), all NRE Item costs will be amortised into the Base Price over a 12- 12-month period. 13.3 Full NRE Item costs for each Product will be quoted using the Buyer’s Bid Template documents. 13.4 The amortization quantity should be clearly documented on the Buyer’s Bid Template. Once the total amortization quantity for each Product has been delivered, Supplier shall subtract the amortization amount from the Base Price and establish a new Base Price for subsequent deliveries. 13.5 Lead times for all tooling are to be quoted by Supplier and accompanied by a detailed timing plan. 13.6 Supplier shall be responsible for the routine maintenance, storage, repair, usage and calibration (if calibration or other specialist requirements are required outside of routine maintenance, repair or usage and not caused by a lack of care or damage by Supplier, then such costs shall be agreed in advance and paid for separately by the Buyer) of all the Buyer furnished, Government furnished and or Government funded equipment tooling, test rigs, rigs and fixtures and/or test stands and Buyer acquired NRE Items in Supplier’s possession for performance of this Agreement. Equipment not owned by Supplier which requires a National Institute of Standards and Technology traceable certificate of calibration will be quoted and submitted to the Buyer for approval prior to submitting equipment to third Party calibration. Supplier will track and file calibration certificates and schedules. 13.7 Supplier shall be responsible for the maintenance and replacement of all NRE Items within their useful life, fair wear and tear excepted. The Buyer shall have an option at any time, which shall be exercised by written notice to Supplier, to pay not more that the balance of the outstanding NRE Item cost for its outright ownership. In this event, Supplier shall subtract the amortisation amount from the Base Price and establish a new Base Price for subsequent deliveries.

NRE and Tooling. 13.1 14.1 Supplier shall quote the life of any new Tools prior to these Tools being manufactured. This will be expressed as the number of parts capable of being produced by the Tooling. Supplier will be responsible for the maintenance and replacement of all Tooling where damage is caused to the Tooling by the acts or omissions of Supplier in not undertaking due care, maintenance and attention to the Tooling, negligence or wilful willful misconduct of Supplier. Supplier shall transfer to the Buyer any transferable warranties on tooling. 13.2 14.2 Unless otherwise agreed between the Parties for extraordinary NRE costs (which will be discussed by the Parties), all NRE Item costs will be amortised amortized into the Base Price over a 12- 12-month period. 13.3 14.3 Full NRE Item costs for each Product will be quoted using the Buyer’s Bid Template documents. 13.4 14.4 The amortization quantity should be clearly documented on the Buyer’s Bid Template. Once the total amortization quantity for each Product has been delivered, Supplier shall subtract the amortization amount from the Base Price and establish a new Base Price for subsequent deliveries. 13.5 14.5 Lead times for all tooling are to be quoted by Supplier and accompanied by a detailed timing plan. 13.6 14.6 Supplier shall be responsible for the routine maintenance, storage, repair, usage and calibration (if calibration or other specialist requirements are required outside of routine maintenance, repair or usage and not caused by a lack of care or damage by Supplier, then such costs shall be agreed in advance and paid for separately by the Buyer) of all the Buyer furnished, Government furnished and or Government funded equipment tooling, test rigs, rigs and fixtures and/or test stands and Buyer acquired NRE Items in Supplier’s possession for performance of this Agreement. Equipment not owned by Supplier which requires a National Institute of Standards and Technology traceable certificate of calibration will be quoted and submitted to the Buyer for approval prior to submitting equipment to third Party calibration. Supplier will track and file calibration certificates and schedules. 13.7 14.7 Supplier shall be responsible for the maintenance and replacement of all NRE Items within their useful life, fair wear and tear excepted. The Buyer shall have an option at any time, which shall be exercised by written notice to Supplier, to pay not more that the balance of the outstanding NRE Item cost for its outright ownership. In this event, Supplier shall subtract the amortisation amortization amount from the Base Price and establish a new Base Price for subsequent deliveries.

NRE and Tooling. 13.1 10.1 Any Tools or Tooling purchased from Supplier shall quote or manufactured by Supplier, the life cost of which forms part of an Order will become the property of Buyer and all right, title and interest in and to any new Tools prior part of Tooling will pass to these Tools being manufactured. This will be expressed Buyer as soon as it is acquired or fabricated in accordance with the number of parts capable of being produced by the Tooling. Supplier will be responsible for the maintenance and replacement of all Tooling where damage is caused to the Tooling by the acts or omissions of Supplier in not undertaking due care, maintenance and attention to the Tooling, negligence or wilful misconduct of Supplier. Supplier shall transfer to the Buyer any transferable warranties on toolingOrder. 13.2 Unless otherwise agreed between the Parties for extraordinary NRE costs (which will be discussed by the Parties), all NRE Item costs will be amortised into the Base Price over a 12- month period. 13.3 Full NRE Item costs for each Product will be quoted using the Buyer’s Bid Template documents. 13.4 The amortization quantity should be clearly documented on the Buyer’s Bid Template. Once the total amortization quantity for each Product has been delivered, Supplier shall subtract the amortization amount from the Base Price and establish a new Base Price for subsequent deliveries. 13.5 Lead times for all tooling are to be quoted by Supplier and accompanied by a detailed timing plan. 13.6 10.2 Supplier shall be responsible for the routine maintenance, storage, repair, usage usage, replacement (within their useful life, fair wear and tear excepted) and calibration (if of all Tooling in Supplier’s possession for performance of this Agreement. If calibration or other specialist requirements are required outside of routine maintenance, repair or usage and not caused by a lack of care or damage by Supplier, then such costs shall be agreed in advance and paid for separately by Buyer‌ 10.3 Buyer’s Property furnished to Supplier (where Buyer Property shall include any third party property provided by the Buyer) shall remain the exclusive property of the Buyer. The Buyer may demand possession thereof at any time without notice. 10.4 Supplier shall maintain and keep Buyer's Property in good condition. Buyer will compensate Supplier at a mutually agreed upon rate in writing, for all calibration, maintenance or repair services to Buyer’s Property (excluding Tools, Tooling and NRE Items and other than normal preventative maintenance services or services to correct defects caused by Supplier’s act or omissions negligence or wilful misconduct). Buyer is not required to compensate Supplier for any such services associated with equipment or tooling owned by Supplier and not intended to be sold or otherwise transferred to Buyer. 10.5 Supplier warrants that Buyer's Property, Tools, Tooling and NRE Items shall not be removed from Supplier's premises except on the prior written permission of Buyer. Supplier may remove Buyer’s Property, Tools, Tooling and NRE Items from Supplier’s premises for purposes of repair provided that Supplier provides advance notice to Buyer of the anticipated removal.‌ 10.6 Supplier shall keep Buyer’s Property, Tools, Tooling and NRE Items separate and apart from its own property and that of other persons and shall clearly xxxx them as being Buyer’s property. Supplier will maintain a system to ensure the adequate control and protection of all the Buyer furnishedfurnished property. 10.7 Supplier warrants that Buyer's Property, Government furnished Tools, Tooling and or Government funded equipment tooling, test rigs, rigs and fixtures and/or test stands and Buyer acquired NRE Items shall not be used by Supplier for any purpose other than for the supply of the Products to Buyer. 10.8 Supplier shall be liable to Buyer for any loss of or damage to Buyer’s Property, Tools, Tooling and NRE Items during the time it is in Supplier’s possession possession, custody or control. During such time Supplier shall insure Buyer’s Property, Tools, Tooling and NRE Items at full replacement value in the name of and for performance the benefit of this AgreementBuyer at Supplier’s expense with a reputable insurance provider.‌ 10.9 Supplier waives any lien which it might otherwise have (whether at the date hereof or subsequently) on any of Buyer's Property for work done thereon or otherwise. Equipment This condition shall not owned by be construed as a waiver of any other right of recovery of any other charges that may be due to Supplier which requires a National Institute of Standards and Technology traceable certificate of calibration will be quoted and submitted to the Buyer for approval prior to submitting equipment to third Party calibration. Supplier will track and file calibration certificates and schedulessuch work. 13.7 10.10 Supplier shall be responsible for the maintenance keep Buyer's Property, Tools, Tooling and replacement NRE Items free of all mortgages, charges or other encumbrances and will procure that any lien over the same is discharged forthwith.‌ 10.11 Supplier shall promptly pay Buyer on demand the full replacement value of any of Buyer's Property, Tools, Tooling and NRE Items within their useful life, fair wear and tear excepted. The which is not provided to Buyer shall have an option at any time, which shall be exercised in same condition as originally received by written notice to Supplier, to pay not more that the balance of the outstanding NRE Item cost for its outright ownership. In this event, Supplier shall subtract the amortisation amount from the Base Price and establish a new Base Price for subsequent deliveriessatisfactorily accounted for.

NRE and Tooling. ‌ 13.1 Supplier shall quote the life of any new Tools prior to these Tools being manufactured. This will be expressed as the number of parts capable of being produced by the Tooling. Supplier will be responsible for the maintenance and replacement of all Tooling where damage is caused to the Tooling by the acts or omissions of Supplier in not undertaking due care, maintenance and attention to the Tooling, negligence or wilful misconduct of Supplier. Supplier shall transfer to the Buyer any transferable warranties on tooling. 13.2 Unless otherwise agreed between the Parties for extraordinary NRE costs (which will be discussed by the Parties), all NRE Item costs will be amortised into the Base Price over a 12- 12-month period.period.‌ 13.3 Full NRE Item costs for each Product will be quoted using the Buyer’s Bid Template documents. 13.4 The amortization quantity should be clearly documented on the Buyer’s Bid Template. Once the total amortization quantity for each Product has been delivered, Supplier shall subtract the amortization amount from the Base Price and establish a new Base Price for subsequent deliveries.deliveries.‌ 13.5 Lead times for all tooling are to be quoted by Supplier and accompanied by a detailed timing plan. 13.6 Supplier shall be responsible for the routine maintenance, storage, repair, usage and calibration (if calibration or other specialist requirements are required outside of routine maintenance, repair or usage and not caused by a lack of care or damage by Supplier, then such costs shall be agreed in advance and paid for separately by the Buyer) of all the Buyer furnished, Government furnished and or Government funded equipment tooling, test rigs, rigs and fixtures and/or test stands and Buyer acquired NRE Items in Supplier’s possession for performance of this Agreement. Equipment not owned by Supplier which requires a National Institute of Standards and Technology traceable certificate of calibration will be quoted and submitted to the Buyer for approval prior to submitting equipment to third Party calibration. Supplier will track and file calibration certificates and schedules. 13.7 Supplier shall be responsible for the maintenance and replacement of all NRE Items within their useful life, fair wear and tear excepted. The Buyer shall have an option at any time, which shall be exercised by written notice to Supplier, to pay not more that the balance of the outstanding NRE Item cost for its outright ownership. In this event, Supplier shall subtract the amortisation amount from the Base Price and establish a new Base Price for subsequent deliveries.