Manufacture of Products All Products marketed through Grantor's Web ------------------------- Site shall be manufactured, packaged, prepared, and shipped in accordance with the specifications and requirements described on Exhibit A hereto as it may be modified from time to time. Quality control standards relating to the Product's weight, color, consistency, micro-biological content, labeling and packaging are also set forth on Exhibit A. In the event that Exhibit A is incomplete, Products shall be manufactured and shipped in accordance with industry standards.
Manufacturing Services Jabil will manufacture the Product in accordance with the Specifications and any applicable Build Schedules. Jabil will reply to each proposed Build Schedule that is submitted in accordance with the terms of this Agreement by notifying Company of its acceptance or rejection within three (3) business days of receipt of any proposed Build Schedule. In the event of Jabil’s rejection of a proposed Build Schedule, Jabil’s notice of rejection will specify the basis for such rejection. When requested by Company, and subject to appropriate fee and cost adjustments, Jabil will provide Additional Services for existing or future Product manufactured by Jabil. Company shall be solely responsible for the sufficiency and adequacy of the Specifications [***].
Marketing Activities The Borrower will not, and will not permit any of its Subsidiaries to, engage in marketing activities for any Hydrocarbons or enter into any contracts related thereto other than (i) contracts for the sale of Hydrocarbons scheduled or reasonably estimated to be produced from their proved Oil and Gas Properties during the period of such contract, (ii) contracts for the sale of Hydrocarbons scheduled or reasonably estimated to be produced from proved Oil and Gas Properties of third parties during the period of such contract associated with the Oil and Gas Properties of the Borrower and its Subsidiaries that the Borrower or one of its Subsidiaries has the right to market pursuant to joint operating agreements, unitization agreements or other similar contracts that are usual and customary in the oil and gas business and (iii) other contracts for the purchase and/or sale of Hydrocarbons of third parties (A) which have generally offsetting provisions (i.e. corresponding pricing mechanics, delivery dates and points and volumes) such that no “position” is taken and (B) for which appropriate credit support has been taken to alleviate the material credit risks of the counterparty thereto.
Development Activities The Development activities referred to in item “b” of paragraph 3.1 include: studies and projects of implementation of the Production facilities; drilling and completion of the Producing and injection xxxxx; and installation of equipment and vessels for extraction, collection, Treatment, storage, and transfer of Oil and Gas. The installation referred to in item “c” includes, but is not limited to, offshore platforms, pipelines, Oil and Gas Treatment plants, equipment and facilities for measurement of the inspected Production, wellhead equipment, production pipes, flow lines, tanks, and other facilities exclusively intended for extraction, as well as oil and gas pipelines for Production Outflow and their respective compressor and pumping stations.
Commercialization Intrexon shall have the right to develop and Commercialize the Reverted Products itself or with one or more Third Parties, and shall have the right, without obligation to Fibrocell, to take any such actions in connection with such activities as Intrexon (or its designee), at its discretion, deems appropriate.
Regulatory Activities Beginning on the Effective Date and to the extent UGNX remains the Lead Development Party with respect to a particular territory, subject to and in accordance with the terms and conditions of this Agreement and the requirements of Applicable Laws, UGNX, shall: (a) use Commercially Reasonable Efforts to file (or have filed) all Regulatory Filings with respect to the Licensed Products in the Field in order to obtain Marketing Approvals in each country in the Territory and the European Territory (or to obtain the European Centralized Approval in the European Core Territory) and in order to obtain Pricing and/or Reimbursement Approvals in the Profit Share Territory; (b) respond in a timely fashion to requests for data and information from Regulatory Authorities with respect to the Licensed Products in the Field in the Territory and the European Territory; and (c) meet with officials of the Regulatory Authorities at such times as may be requested by such Regulatory Authorities with respect to the Core Development Activities (“Regulatory Activities”), provided that KHK will have primary responsibility for obtaining, and UGNX shall provide all assistance reasonably requested by KHK, in relation to Pricing and/or Reimbursement Approvals for the Licensed Products in the Field in the European Territory. For the avoidance of doubt, UGNX will be responsible for obtaining, and KHK will provide all assistance reasonably requested by UGNX, in relation to Pricing and/or Reimbursement Approvals, if any, for the Licensed Products in the Field in the Profit Share Territory as part of the UGNX Core Development Activities, it being understood that the costs incurred by UGNX in connection with such activities will be shared equally (50/50). All such Regulatory Activities will be conducted in a manner consistent with the Core Development Plan and coordinated by the JSC in accordance with Article 3. Without limiting the applicability of the foregoing and the remainder of this Article 5, UGNX shall interface with the applicable Regulatory Authority(ies) and, through the JDC, shall keep KHK reasonably informed of all material events and developments occurring in the course of the Regulatory Activities, including scheduled UGNX regulatory strategy discussions and meetings with Regulatory Authorities in the Territory and the European Territory relating to the Licensed Products in the Field.
Commercialization Reports Throughout the term of this Agreement and during the Sell-Off Period, and within thirty (30) days of December 31st of each year, Company will deliver to University written reports of Company’s and Sublicensees’ efforts and plans to develop and commercialize the innovations covered by the Licensed Rights and to make and sell Licensed Products. Company will have no obligation to prepare commercialization reports in years where (a) Company delivers to University a written Sales Report with active sales, and (b) Company has fulfilled all Performance Milestones. In relation to each of the Performance Milestones each commercialization report will include sufficient information to demonstrate achievement of those Performance Milestones and will set out timeframes and plans for achieving those Performance Milestones which have not yet been met.
Commercialization Efforts The RECIPIENT shall, including whether through its own efforts or the efforts of a licensee under a License Agreement allowed by the terms of this Attachment, use diligent and commercially reasonable efforts to commercialize at least one Commercial Product or Commercial Service or otherwise bring to practical application the Project Results in accordance with the commercial development plan submitted with the Application and including any changes to such commercial development plan in accordance with Section D3.01. For the avoidance of doubt, partnering or licensing activities shall be considered to be efforts to commercialize.
Development and Commercialization Subject to Sections 4.6 and 4.7, Fibrocell shall be solely responsible for the development and Commercialization of Fibrocell Products and Improved Products. Fibrocell shall be responsible for all costs incurred in connection with the Fibroblast Program except that Intrexon shall be responsible for the following: (a) costs of establishing manufacturing capabilities and facilities in connection with Intrexon’s manufacturing obligation under Section 4.6 (provided, however, that Intrexon may include an allocable portion of such costs, through depreciation and amortization, when calculating the Fully Loaded Cost of manufacturing a Fibrocell Product, to the extent such allocation, depreciation, and amortization is permitted by US GAAP, it being recognized that the majority of non-facilities scale-up costs cannot be capitalized and amortized under US GAAP); (b) costs of basic research with respect to the Intrexon Channel Technology and Intrexon Materials (i.e., platform improvements) but, for clarity, excluding research described in Section 4.7 or research requested by the JSC for the development of a Fibrocell Product or an Improved Product (which research costs shall be reimbursed by Fibrocell); (c) [*****]; and (d) costs of filing, prosecution and maintenance of Intrexon Patents. The costs encompassed within subsection (a) above shall include the scale-up of Intrexon Materials and related active pharmaceutical ingredients for clinical trials and Commercialization of Fibrocell Products undertaken pursuant to Section 4.6, which shall be at Intrexon’s cost whether it elects to conduct such efforts internally or through Third Party contractors retained by either Intrexon or Fibrocell (with Intrexon’s consent).
Manufacturing and Supply (a) Depomed shall supply Product for use in conducting Depomed’s development activities for Product in the Field and in the Territory as set forth in Exhibit D. (b) During the four-year period beginning on the Effective Date (the “Supply Period”), Depomed shall supply and package (or have supplied and packaged) Product pursuant to this Section 4.8. Depomed will use commercially reasonable efforts to enter into a long-term Product supply agreement with [***] days after the Effective Date (the “Depomed Supply Agreement”) that will be freely assignable to Solvay or its Affiliates, successors or assigns at any time. In addition, Depomed and Solvay will negotiate and enter into a Product supply agreement with business terms substantially similar to the Depomed Supply Agreement concurrently with the execution and delivery by Depomed and [***] of the Depomed Supply Agreement (the “Solvay Supply Agreement”, and, together with the Depomed Supply Agreement, the “Supply Agreements”). The Supply Agreements will, together, contain the following provisions (among others mutually agreeable to the Parties): (i) Under the Solvay Supply Agreement, Depomed will agree to supply Solvay with its requirements of finished, packaged Product during the Supply Period; (ii) All manufacturing and records will be performed and maintained in accordance with specifications, cGMP and Applicable Law; (iii) Depomed will provide reasonable assistance to Solvay in the event Solvay wishes to qualify a backup Product manufacturer; (iv) Depomed shall [***]; (v) Solvay will pay Depomed the following amounts in connection with all activities performed by or on behalf of Depomed associated with Product manufacture and supply (other than activities specified on Exhibit D) (A) [***]% of Depomed’s out-of-pocket costs incurred in connection with such manufacture and supply of Product to Solvay, and (B) a labor charge equal to the FTE Charges for all Depomed employees allocated to the manufacture and supply of Product to Solvay, not to exceed FTE Charges for an aggregate of [***] during any given calendar quarter (and Depomed shall provide to Solvay periodic reports detailing the FTE Charges for which Solvay must pay Depomed hereunder);
