Physical Specifications. Feature Description
Physical Specifications. Transformers shall be of low profile design with pitched top to facilitate water run-off. High and low voltage compartments shall be completely sealed when door is closed with no exposed removable parts. A captive penta head bolt shall be provided for securing the door combined with a recessed integral locking provision to accommodate a standard padlock. The door shall be mounted with stainless steel hinge pins. The finish coat of paint shall be Xxxxxxx pad mount green 7GY3.29/11.5.
Physical Specifications. Transformers shall be of profile design. High and low voltage compartments shall be completely sealed when doors are closed with no exposed removable parts and with a captive penta head bolt for securing both doors and a recessed pad lockable door handle. The high voltage compartment shall be on the left, separated from the low voltage compartment by the fixed steel barrier. It shall be impossible to open the door of the high voltage compartment without having first opened the door of the low voltage compartment. Transformers shall be designed with provisions for installation on a flat concrete pad. The base of both compartments shall be open to provide maximum accessibility for conduits and/or conductors. Color transformers to be Xxxxxxx pad mount green. All transformers 500 KVA and larger shall have externally operated no-load high voltage tap changers. Taps to be two 2 1/2% above and two 2 1/2% below normal voltage.
Physical Specifications. Dimensions are provided below for reference only. Refer to product drawing PRD-016-D for exact dimensions and tolerances.
a. Length 1200mm b. Width 600mm
Physical Specifications. No more than twelve percent (12%) shall pass through a 325 mesh Tyler Standard screen and no more than ten percent (10%) should be retained on a 100 mesh Tyler screen using the dry screen test method. The loss on ignition, after drying at 300(Degree)C. shall not exceed one percent (1%) upon heating at 1200(Degree)C. as determined by AA's Standard Methods of Analysis 121B (11-65). The total water absorption which is defined as the residual water of crystallization plus total moisture that can be absorbed by exposure to a forty-four percent (44%) relative humidity atmosphere shall not exceed four percent (4%) as determined by AA's Standards Methods of Analysis 130A (12-65).
Physical Specifications. It is acceptable that the system be manufactured , stored, shipped, and installed in modular components to better accommodate size and weight issues. Maximum Weight Per Uninstalled Module: [***] Maximum Height Per Uninstalled Module: [***] Maximum Width Per Uninstalled Module: [***] Mounting of NMR Magnet Assy: Bolted to floor
Physical Specifications. This outline of the ASV’s physical and mechanical attributes serves as a reference for both the ASV Manual and Autonomous product variants. Coverage Capability* 10,000m2/workday Wave Heignt (Max.) 0.5m Wake Wave Height (Max.} 1.5m Wind Speed (Max.) 40km/hr Water Speed (Max.} 3 km/hr Water Depth (Min.) 30cm O’utdeor Tem erature (Max.) 50 °C Outdoor Temperatur:e (Min.) -15 °C Can operate in saltwater, freshwater aml brackish water Note: These are estimated values. The weather and operating environment is complex and ever changing. Do not operate the ASV if the conditions feel unsafe.
Physical Specifications. The Journal will be published in 7” x 10” print format, and Publisher will determine, in consultation with Sponsor, the other physical specifications and cover design of the Journal.
Physical Specifications
