Preambles. The descriptions given in the various items below are not necessarily full and complete and reference must be made to the "Model Preambles To All Trades 2008", "Supplementary Preambles" and "Supplementary Specifications" to this contract for the full requirements of each scheduled item SUPPLEMENTARY PREAMBLES SANS Specifications Alkali resistant primer - SANS 1416 Wash primer (metal etch) - SANS 1001 - 1 Primers for internal wood work - SANS 678 Type 111 Gloss enamel paint - SANS 630 Undercoat for paints (Except emulsion paint) - SANS 681 Type 1 Aluminium paint - SANS 682 Grade 11 Emulsion paint - SANS 1586 (Gloss, Semi gloss, Xxxx : Internal /External) PAINTWORK, ETC. TO PREVIOUSLY PAINTED SURFACES Carried Forward R Section No. 5 Bill No. 9 Paintwork Amount Brought Forward R PREPARATORY WORK TO EXISTING WORK Previously painted plastered surfaces Surfaces shall be thoroughly washed down and allowed to dry completely before any paint is applied. Blistered or peeling paint shall be completely removed and cracks shall be opened, filled with a suitable filler and finished smooth Previously painted metal surfaces Surfaces shall be thoroughly rubbed and cleaned down. Blistered or peeling paint shall be completely removed down to bare metal Previously painted wood surfaces Surfaces shall be thoroughly cleaned down. Blistered or peeling paint shall be completely removed and cracks and crevices shall be primed, filled with suitable filler and finished smooth PAINT SPECIFICATIONS All painting shall be done in accordance with Dulux or other approved specifications unless otherwise described ON INTERNAL FLOATED PLASTER SURFACES Prepare and sand down existing surfaces and apply "Plascon" or other equally approved Primer (PP700) and two coats "Velvaglo" water based paint for interior use 1 On Walls m2 112 ON EXTERNAL FLOATED PLASTER SURFACES Prepare and sand down existing surfaces and apply "Plascon" or other equally approved Primer (PP700) and two coats "Velvaglo" water based paint for interior use 2 On Walls m2 136 Carried Forward R Section No. 5 Bill No. 9 Paintwork Brought Forward R PAINTWORK, ETC. TO NEW SURFACES ON PLASTERBOARD SURFACES
Appears in 1 contract
Samples: idt.org.za
Preambles. The descriptions given in the various items below are not necessarily full and complete and reference must be made to the "Model Preambles To All Trades 2008", "Supplementary Preambles" and "Supplementary Specifications" to this contract for the full requirements of each scheduled item SUPPLEMENTARY PREAMBLES SANS Specifications Alkali resistant primer - SANS 1416 Wash primer (Fixing Items described as 'nailed' shall be deemed to be fixed with hardened steel nails or pins, or to be shot-pinned, to brickwork or concrete. Items described as 'plugged' shall be deemed to include screwing to fibre, plastic or metal etch) - SANS 1001 - 1 Primers for internal wood work - SANS 678 Type 111 Gloss enamel paint - SANS 630 Undercoat for paints (Except emulsion paint) - SANS 681 Type 1 Aluminium paint - SANS 682 Grade 11 Emulsion paint - SANS 1586 (Glossplugs at not exceeding 500mm centres, Semi glossand where described as 'bolted', Xxxx : Internal /External) PAINTWORKthe bolts have been given elsewhere. Joinery Descriptions of frames shall be deemed to include frames, ETCtransomes, rails, etc. TO PREVIOUSLY PAINTED SURFACES Descriptions of hardwood joinery shall be deemed to include sinking and pelleting heads and nuts of bolts ROOFS, ETC Carried Forward R Section No. 5 3 Bill No. 9 Paintwork 3 Carpentry & Joinery Amount Brought Forward R PREPARATORY WORK TO EXISTING WORK Previously painted plastered surfaces Surfaces shall Plate nailed timber roof truss construction The following is applicable in respect of roof trusses: Trusses are at maximum 1,10m centres Roof covering is galvanised "IBR" roof sheeting with "Globalcoat" finish on one side on 50 x 75mm purlins at 1,1m maximum centres. Ceilings are generally 6,4mm gypsum plasterboard on 38 x 38mm brandering. All timber to be thoroughly washed down and allowed to dry completely before any paint is applied. Blistered or peeling paint shall be completely removed and cracks shall be opened, filled with a suitable filler and finished smooth Previously painted metal surfaces Surfaces shall be thoroughly rubbed and cleaned down. Blistered or peeling paint shall be completely removed down to bare metal Previously painted wood surfaces Surfaces shall be thoroughly cleaned down. Blistered or peeling paint shall be completely removed and cracks and crevices shall be primed, filled with suitable filler and finished smooth PAINT SPECIFICATIONS All painting shall be done sawn softwood in accordance with Dulux V4 or other approved specifications unless otherwise described ON INTERNAL FLOATED PLASTER SURFACES Prepare M4 as defined in SABS 563 or SABS 1245. Metal connector plates shall have a minimum yield strength of 228 MPa and sand down existing surfaces a minimum ultimate tensile strength of 330 Mpa with hot-dip galvanised finish. All joints to be close fitted butt joints. Trusses shall be designed by a registered supplier of prefabricated trusses who shall issue an Engineers Certificate upon completion of the installation. The dimensions in the descriptions of the trusses are nominal and apply "Plascon" actual measurements are to be obtained on site before design or other equally approved Primer fabricaton commences. Tenderers must study the roof plan and sections as attached to the back of these bills of quantities (PP700refer drawing No.'s CLASS-4 - 001 to 002) and two must obtain prices from a qualified and registered roof truss supplier as no claims in this regard will be entertained. Sawn softwood 1 50 x 75mm Purlins m 636 2 38 x 114mm Wall plates m 105 Sundries 3 Two coats "Velvaglo" water based paint for interior use 1 On Walls creosote on sawn timbers m2 112 ON EXTERNAL FLOATED PLASTER SURFACES Prepare and sand down existing surfaces and apply "Plascon" or other equally approved Primer (PP700) and two coats "Velvaglo" water based paint for interior use 2 On Walls m2 136 157 EAVES, VERGES, ETC Carried Forward R Section No. 5 3 Bill No. 9 Paintwork 3 Carpentry & Joinery Brought Forward R PAINTWORK, ETC. TO NEW SURFACES ON PLASTERBOARD SURFACESMedium density plain fibre-cement flat sheets
Appears in 1 contract
Samples: idt.org.za
Preambles. The descriptions given in the various items below are not necessarily full and complete and reference must be made to the "Model Preambles To All Trades 2008", "Supplementary Preambles" and "Supplementary Specifications" to this contract for the full requirements of each scheduled item SUPPLEMENTARY PREAMBLES SANS Specifications Alkali resistant primer - SANS 1416 Wash primer (Fixing Items described as 'nailed' shall be deemed to be fixed with hardened steel nails or pins, or to be shot-pinned, to brickwork or concrete. Items described as 'plugged' shall be deemed to include screwing to fibre, plastic or metal etch) - SANS 1001 - 1 Primers for internal wood work - SANS 678 Type 111 Gloss enamel paint - SANS 630 Undercoat for paints (Except emulsion paint) - SANS 681 Type 1 Aluminium paint - SANS 682 Grade 11 Emulsion paint - SANS 1586 (Glossplugs at not exceeding 500mm centres, Semi glossand where described as 'bolted', Xxxx : Internal /External) PAINTWORKthe bolts have been given elsewhere. Joinery Descriptions of frames shall be deemed to include frames, ETCtransomes, rails, etc. TO PREVIOUSLY PAINTED SURFACES Descriptions of hardwood joinery shall be deemed to include sinking and pelleting heads and nuts of bolts ROOFS, ETC Carried Forward R Section No. 5 Bill No. 9 Paintwork 4 Carpentry & Joinery Amount Brought Forward R PREPARATORY WORK TO EXISTING WORK Previously painted plastered surfaces Surfaces shall Plate nailed timber roof truss construction The following is applicable in respect of roof trusses: Trusses are at maximum 1,10m centres Roof covering is galvanised "IBR" roof sheeting with "Globalcoat" finish on one side on 50 x 75mm purlins at 1,1m maximum centres. Ceilings are generally 6,4mm gypsum plasterboard on 38 x 38mm brandering. All timber to be thoroughly washed down and allowed to dry completely before any paint is applied. Blistered or peeling paint shall be completely removed and cracks shall be opened, filled with a suitable filler and finished smooth Previously painted metal surfaces Surfaces shall be thoroughly rubbed and cleaned down. Blistered or peeling paint shall be completely removed down to bare metal Previously painted wood surfaces Surfaces shall be thoroughly cleaned down. Blistered or peeling paint shall be completely removed and cracks and crevices shall be primed, filled with suitable filler and finished smooth PAINT SPECIFICATIONS All painting shall be done sawn softwood in accordance with Dulux V4 or other approved specifications unless otherwise described ON INTERNAL FLOATED PLASTER SURFACES Prepare M4 as defined in SABS 563 or SABS 1245. Metal connector plates shall have a minimum yield strength of 228 MPa and sand down existing surfaces a minimum ultimate tensile strength of 330 Mpa with hot-dip galvanised finish. All joints to be close fitted butt joints. Trusses shall be designed by a registered supplier of prefabricated trusses who shall issue an Engineers Certificate upon completion of the installation. The dimensions in the descriptions of the trusses are nominal and apply "Plascon" actual measurements are to be obtained on site before design or other equally approved Primer fabricaton commences. Tenderers must study the roof plan and sections as attached to the back of these bills of quantities (PP700refer drawing No.'s CLASS-4 - 001 to 002) and two coats "Velvaglo" water based paint for interior use must obtain prices from a qualified and registered roof truss supplier as no claims in this regard will be entertained. Sawn softwood 1 On Walls m2 112 ON EXTERNAL FLOATED PLASTER SURFACES Prepare 38 x 114mm Wall plates m 105 2 Design, manufacture and sand down existing surfaces and apply "Plascon" or other equally approved Primer (PP700) and two coats "Velvaglo" water based paint for interior use 2 On Walls m2 136 Carried Forward R Section No. 5 Bill No. 9 Paintwork Brought Forward R PAINTWORKdeliver to site, ETC. TO NEW SURFACES ON PLASTERBOARD SURFACESplate nailed roof truss construction to one classroom block, approximate size 10000 x 7200mm overall on plan consisting of ten
Appears in 1 contract
Samples: idt.org.za
Preambles. The descriptions given in the various items below are not necessarily full and complete and reference must be made to the "Model Preambles To All Trades 2008", "Supplementary Preambles" and "Supplementary Specifications" to this contract for the full requirements of each scheduled item SUPPLEMENTARY PREAMBLES SANS Specifications Alkali resistant primer - SANS 1416 Wash primer (metal etch) - SANS 1001 - 1 Primers for internal wood work - SANS 678 Type 111 Gloss enamel paint - SANS 630 Undercoat for paints (Except emulsion paint) - SANS 681 Type 1 Aluminium paint - SANS 682 Grade 11 Emulsion paint - SANS 1586 (Gloss, Semi gloss, Xxxx : Internal /External) PAINTWORK, ETC. TO PREVIOUSLY PAINTED SURFACES Carried Forward R Section No. 5 3 Bill No. 9 7 Paintwork Amount Brought Forward R PREPARATORY WORK TO EXISTING WORK Previously painted plastered surfaces Surfaces shall be thoroughly washed down and allowed to dry completely before any paint is applied. Blistered or peeling paint shall be completely removed and cracks shall be opened, filled with a suitable filler and finished smooth Previously painted metal surfaces Surfaces shall be thoroughly rubbed and cleaned down. Blistered or peeling paint shall be completely removed down to bare metal Previously painted wood surfaces Surfaces shall be thoroughly cleaned down. Blistered or peeling paint shall be completely removed and cracks and crevices shall be primed, filled with suitable filler and finished smooth PAINT SPECIFICATIONS All painting shall be done in accordance with Dulux or other approved specifications unless otherwise described ON INTERNAL FLOATED PLASTER SURFACES Prepare and sand down existing surfaces and apply "Plascon" or other equally approved Primer (PP700) and two coats "Velvaglo" water based paint for interior use 1 On Walls m2 112 450 ON EXTERNAL FLOATED PLASTER SURFACES Prepare and sand down existing surfaces and apply "Plascon" or other equally approved Primer (PP700) and two coats "Velvaglo" water based paint for interior use 2 On Walls m2 136 320 Carried Forward R Section No. 5 3 Bill No. 9 7 Paintwork Brought Forward R PAINTWORK, ETC. TO NEW SURFACES ON PLASTERBOARD SURFACES
Appears in 1 contract
Samples: idt.org.za
Preambles. The descriptions given in the various items below are not necessarily full and complete and reference must be made to the For preambles see "Model Preambles To All Trades 2008", "Supplementary PreamblesConstruction Specifications - General Specification (PW371-A)" and "Supplementary SpecificationsConstruction Specifications - Particular Specification (PW371-B)" SUPPLEMENTARY PREAMBLES General Making good of finishes shall be deemed to this contract include making good of the brick and concrete surfaces onto which the new finishes are applied, where necessary The contractor will be required to take all dimensions affecting the existing buildings on the site and he will be held solely responsible for the full requirements accuracy of each scheduled item SUPPLEMENTARY PREAMBLES SANS Specifications Alkali resistant primer - SANS 1416 Wash primer all such dimensions where used in the manufacture of new items (metal etchdoors, windows, fittings, etc) - SANS 1001 - 1 Primers Removal of doors, windows, frames, etc Where doors, windows, etc are described as taken out, this shall be understood to include for internal wood work - SANS 678 Type 111 Gloss enamel paint - SANS 630 Undercoat for paints (Except emulsion paint) - SANS 681 Type 1 Aluminium paint - SANS 682 Grade 11 Emulsion paint - SANS 1586 (Glossremoval of all beads, Semi glossarchitraves, Xxxx : Internal /External) PAINTWORKironmongery, ETCetc. TO PREVIOUSLY PAINTED SURFACES Doors, windows, etc that are to be re-fixed are to be provided with new architraves Doors, fanlights, windows, fittings, frames, linings, etc which are to remain the property of the employer shall be carefully taken out, temporarily stored and handed over to the employer Carried Forward to Collection R Section No. 5 2 RENOVATIONS TO EXISTING BUILDINGS Bill No. 9 Paintwork 2 ALTERATIONS Ramphelane Secondary School Amount Brought Forward R PREPARATORY WORK TO EXISTING WORK Previously painted plastered surfaces Surfaces Doors, fanlights, windows, fittings, frames, linings, etc which are to be re-used shall be thoroughly washed down overhauled before refixing including taking off, easing and allowed rehanging, cramping up, re-wedging as required and making good cramps, dowels, etc, and oiling, adjusting and repairing ironmongery as necessary, replacing any glass damaged in removal or subsequently and stopping up all nail and screw holes with tinted plastic wood to dry completely before any paint match timber, unless otherwise described. Re-painting or re-varnishing is applied. Blistered given separately Prices for taking out and removing doors and frames shall include for removing door stops, cabin hooks, etc and making good to match existing Forming new openings or peeling paint altering openings in existing walls Where new openings are formed or openings altered in existing walls, the wall above the opening shall be completely removed broken out and cracks a new brick, in-situ or prestressed concrete lintel inserted, complete with the necessary reinforcement, formwork, turning piece, etc, the jambs and portions of openings as described shall be openedbuilt up with new brickwork or blockwork properly toothed and bonded to existing, filled with a suitable filler and finished smooth Previously painted metal surfaces Surfaces cavities of hollow walls shall be thoroughly rubbed closed where necessary and cleaned down. Blistered or peeling paint finishes shall be completely removed down to bare metal Previously painted wood made good all round and into reveals Building up openings Where existing openings are described as building up, the existing surfaces Surfaces all round shall be thoroughly cleaned down. Blistered prepared as necessary, brickwork or peeling paint blockwork properly toothed and bonded to existing, wedged up to underside of existing lintel and finishes shall be completely removed made good on both sides Cement screeds and cracks and crevices pavings, granolithic, etc shall be primedlevelled and prepared for the raising of brickwork Protection The contractor must protect all work not removed such as walls, filled with suitable filler and finished smooth PAINT SPECIFICATIONS All painting shall be done in accordance with Dulux floors, doors, windows or other approved specifications unless otherwise described ON INTERNAL FLOATED PLASTER SURFACES Prepare joinery, loose and sand down existing surfaces fixed fittings and apply "Plascon" or other equally approved Primer (PP700) electrical appliances, etc, from damage during the progress of the work and two coats "Velvaglo" water based paint provide all necessary materials for interior use 1 On Walls m2 112 ON EXTERNAL FLOATED PLASTER SURFACES Prepare and sand down existing surfaces and apply "Plascon" or other equally approved Primer (PP700) and two coats "Velvaglo" water based paint for interior use 2 On Walls m2 136 so doing Carried Forward to Collection R Section No. 5 2 RENOVATIONS TO EXISTING BUILDINGS Bill No. 2 ALTERATIONS Ramphelane Secondary School REMOVAL OF EXISTING WORK Note: All usable material such as roof sheets, windows, etc to be handed over to the employer. All other material (except where stated for re-use) to be removed from site by the contractor Breaking down and removing unreinforced concrete 1 Steps m3 1 Breaking down and removing brickwork etc 2 One brick walls m2 212 Taking out and removing doors from steel frames (frames to remain) including new striking plates, repairs to steel frame and preparation thereof to receive new doors 3 Timber single door not exceeding 2,5m2 No 9 Paintwork Brought Forward R PAINTWORK, ETC. TO NEW SURFACES ON PLASTERBOARD SURFACESTaking out and removing pressed steel door frames and steel/timber doors including repairs to brickwork and preparation thereof to receive new frames 4 Timber single door and steel frame not exceeding
Appears in 1 contract
Samples: www.idt.org.za
Preambles. The descriptions given in the various items below are not necessarily full For preambles see " Specifications of materials and complete and reference must methods to be made to the "Model Preambles To All Trades 2008", "Supplementary Preamblesused - PW371-A" and "Supplementary Specifications" to this contract for the full requirements of each scheduled item SUPPLEMENTARY PREAMBLES SANS Specifications Alkali resistant primer - SANS 1416 Wash primer (metal etch) - SANS 1001 - 1 Primers "Polycop" polypropylene pipes: Polypropylene pipes 54mm diameter and under shall be seamless copper coloured class 16 pipes jointed with "Fast-fuse" heat welded thermoplastic or brass compression fittings as designed for internal wood work - SANS 678 Type 111 Gloss enamel paint - SANS 630 Undercoat use with copper pipes as stated Pipes shall be firmly fixed to walls etc with coloured nylon snap-in pipe clips with provision for paints (Except emulsion paint) - SANS 681 Type 1 Aluminium paint - SANS 682 Grade 11 Emulsion paint - SANS 1586 (Glossaccommodating thermal movement and jointed and fixed strictly in accordance with the manufacturer's instructions All pipe diameters are nominal external "Polylink" polypropylene pipes: Polypropylene pipes 63mm diameter and over shall be class 12 pipes jointed with cast iron "Supraclamp" running joints Fusion welded bends, Semi glossonce or twice mitred as necessary, Xxxx : Internal /External) PAINTWORK, ETC. TO PREVIOUSLY PAINTED SURFACES and tees shall be factory manufactured Fusion welded bends and tees shall include jointing to pipes with PVC rubber ring double Z joint couplers Carried Forward to Collection R Section No. 5 2 BUILDING Bill No. 9 Paintwork 12 PLUMBING AND DRAINAGE (PROVISIONAL) Procost & Associates (PTY) Ltd Amount Brought Forward R PREPARATORY WORK TO EXISTING WORK Previously painted plastered surfaces Surfaces Branch tees shall include flanged and bolted joints to "Polycop" branch pipes in addition and for brass compression male iron to copper straight couplers Reducers shall include jointing to pipes with PVC rubber ring double Z joint couplers and reducers shall be thoroughly washed down and allowed of sufficient overall length to dry completely before any paint is applied. Blistered or peeling paint accommodate same All pipes shall be completely removed jointed and cracks shall be opened, filled with a suitable filler and finished smooth Previously painted metal surfaces Surfaces shall be thoroughly rubbed and cleaned down. Blistered or peeling paint shall be completely removed down to bare metal Previously painted wood surfaces Surfaces shall be thoroughly cleaned down. Blistered or peeling paint shall be completely removed and cracks and crevices shall be primed, filled with suitable filler and finished smooth PAINT SPECIFICATIONS All painting shall be done fixed strictly in accordance with Dulux the manufacturer's instructions All pipe diameters are nominal external Concrete pipes: Pipes shall be jointed with ogee joints with rubber collars or other approved specifications unless otherwise described ON INTERNAL FLOATED PLASTER SURFACES Prepare socket and sand down existing surfaces spigot joints with rubber rings Vitrified xxxx xxxxx: Pipes shall rest on solid ground and, where necessary, pockets of sufficient size shall be cut around joints to enable the jointing to be properly performed or, alternatively, pipes shall be bedded full length on and apply "Plascon" or other equally approved Primer (PP700) including unreinforced concrete laid in a semi-dry state immediately before pipes are laid Sewer and two coats "Velvaglo" drainage pipes and fittings shall be jointed and sealed with butyl rubber rings uPVC pipes and fittings: Soil, waste and vent pipes and fittings shall be solvent weld jointed uPVC pressure pipes and fittings: Pipes for water based paint for interior use 1 On Walls m2 112 ON EXTERNAL FLOATED PLASTER SURFACES Prepare supply shall be of the class stated Pipes of 40mm diameter and sand down existing surfaces smaller shall be plain ended with solvent welded uPVC loose sockets and apply "Plascon" or other equally approved Primer (PP700) and two coats "Velvaglo" water based paint for interior use 2 On Walls m2 136 fittings Carried Forward to Collection R Section No. 5 2 BUILDING Bill No. 9 Paintwork Brought Forward 12 PLUMBING AND DRAINAGE (PROVISIONAL) Procost & Associates (PTY) Ltd Pipes of 50mm diameter and greater shall have sockets and spigots with push in type integral rubber ring joints. Bends shall be uPVC and all other fittings shall be cast iron, all with similar push-in type joints Copper pipes: Pipes shall be hard drawn and half-hard pipes of the class stated. Class 0 (thin walled hard drawn) pipes shall not be bent. Class 1 (thin walled half-hard), class 2 (half-hard) and class 3 (heavy walled half-hard) pipes shall only be bent with benders with inner and outer formers. Fittings to copper waste, vent and anti-syphon pipes, capillary solder fittings and compression fittings shall be "Cobra Watertech" type. Capillary solder fittings shall comply with ISO 2016. Only compression fittings shall be used in walls or in ground Fixing of pipes Unless specifically otherwise stated, descriptions of pipes shall be deemed to include fixing to walls etc, casting in, building in or suspending not exceeding 1m below suspension level Lead pipes and fittings All soldered joints shall be wiped and brass unions shall be used for jointing lead to steel Reducing fittings Where fittings have reducing ends or branches they are described as "reducing". In the case of pipes with diameters not exceeding 60mm only the largest end or branch size is given. Should the contractor wish to use other fittings and bushes or reducers he may do so on the understanding that no claim in this regard will be entertained. In the case of pipes with diameters exceeding 60mm all sizes are given and no claim for extra bushes, reducers, etc will be entertained Wire gratings Carried to Collection R PAINTWORKSection No. 2 BUILDING Bill No. 12 PLUMBING AND DRAINAGE (PROVISIONAL) Procost & Associates (PTY) Ltd Septic tanks Descriptions of septic tanks shall be deemed to include excavation, ETCbedding and jointing, concrete base slabs, jointing to drains and backfilling, compaction, etc all in accordance with the manufacturer's instructions Exposed concrete surfaces Exposed surfaces of concrete stormwater channels, cover slabs, inspection eye marker slabs, xxxxxx tops, cleaning eye tops, catchpits, inspection xxxxxxxx, etc shall be finished smooth with plaster Excavations No claim for rock excavation will be entertained unless the contractor has timeously notified the quantity surveyor thereof prior to backfilling "Soft rock" and "hard rock" shall be as defined in "Earthworks" Laying, backfilling, bedding, etc. TO NEW SURFACES ON PLASTERBOARD SURFACESof pipes Pipes shall be laid and bedded and trenches shall be carefully backfilled in accordance with manufacturers' instructions Where no manufacturers' instructions exist pipes shall be laid in accordance with clauses 5.1 and 5.2 of each of the following: SABS 1200 L : Medium-pressure pipelines LD : Sewers LE : Stormwater drainage Pipe trenches etc shall be backfilled in accordance with clauses 3, 5.5, 5.6, 5.7 and 7 of SABS 1200 DB : Earthworks (Pipe trenches) Pipes shall be bedded in accordance with clauses 3.1 to 3.4.1, 5.1 to 5.3 and 7 of SABS 1200 LB : Bedding (Pipes). Unless otherwise described bedding of rigid pipes shall be class B bedding Flush pans Flush pans shall have straight or side outlets and "P" or "S" traps as necessary Carried to Collection R Section No. 2 BUILDING Bill No. 12 PLUMBING AND DRAINAGE (PROVISIONAL) Procost & Associates (PTY) Ltd Stainless steelbasins, sinks, wash troughs, urinals, etc. Units shall have standard aprons on all exposed edges and tiling keys against walls where applicable Waste unions Descriptions of waste unions shall be deemed to include rubber or vulcanite plugs and chains fixed to fittings Steel sectional water tanks Tanks shall comply with SABS CKS 114
Appears in 1 contract
Samples: www.idt.org.za
