Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters).
Unbundled Network Element Combinations 4.1 For purposes of this Section, references to “Currently Combined” Network Elements shall mean that the particular Network Elements requested by NewPhone are in fact already combined by BellSouth in the BellSouth network. References to “
Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (DAMLs), and may have up to 6,000 feet of bridged tap between the End User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For Loops less than 18,000 feet and with less than 1300 Ohms resistance, the Loop will provide a voice grade transmission channel suitable for Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point.
Unbundled Voice Loops (UVL) may be provisioned using any type of facility that will support voice grade services. This may include loaded copper, non-loaded copper, digital loop carrier systems, fiber/copper combination (hybrid loop) or a combination of any of these facilities. BellSouth, in the normal course of maintaining, repairing, and configuring its network, may also change the facilities that are used to provide any given voice grade circuit. This change may occur at any time. In these situations, BellSouth will only ensure that the newly provided facility will support voice grade services. BellSouth will not guarantee that Azul Tel will be able to continue to provide any advanced services over the new facility. BellSouth will offer UVL in two different service levels - Service Level One (SL1) and Service Level Two (SL2).
Unbundled Copper Loops (UCL) 2.4.1 BellSouth shall make available Unbundled Copper Loops (UCLs). The UCL is a copper twisted pair Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters) and is not intended to support any particular telecommunications service. The UCL will be offered in two types – Designed and Non-Designed.
Unbundled Channelization (Multiplexing) 5.7.1 To the extent NewPhone is purchasing DS1 or DS3 or STS-1 Dedicated Transport pursuant to this Agreement, Unbundled Channelization (UC) provides the optional multiplexing capability that will allow a DS1 (1.544 Mbps) or DS3 (44.736 Mbps) or STS-1 (51.84 Mbps) Network Elements to be multiplexed or channelized at a BellSouth central office. Channelization can be accomplished through the use of a multiplexer or a digital cross-connect system at the discretion of BellSouth. Once UC has been installed, NewPhone may request channel activation on a channelized facility and BellSouth shall connect the requested facilities via COCIs. The COCI must be compatible with the lower capacity facility and ordered with the lower capacity facility. This service is available as defined in NECA 4.
Unbundled Sub-Loop Distribution Intrabuilding Network Cable (USLD-INC) is the distribution facility owned or controlled by BellSouth inside a building or between buildings on the same property that is not separated by a public street or road. USLD-INC includes the facility from the cross connect device in the building equipment room up to and including the point of demarcation at the End User’s premises.
Voice Grade Unbundled Copper Sub-Loop Unbundled Sub-Loop Distribution – Intrabuilding Network Cable (aka riser cable)
Unbundled Voice Loop – SL2 (UVL-SL2 Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhone. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on XX0 Xxxxx. The OC feature will allow NewPhone to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.
Liquidation Rights In the event of any liquidation, dissolution, and winding up of the Partnership under Section 12.4 or a sale, exchange, or other disposition of all or substantially all of the assets of the Partnership, either voluntary or involuntary, the Record Holders of the Series C Preferred Units shall be entitled to receive, out of the assets of the Partnership available for distribution to the Partners or any Assignees, prior and in preference to any distribution of any assets of the Partnership to the Record Holders of any other class or series of Partnership Interests other than the Series B Preferred Units, (i) first, any accumulated and unpaid distributions on the Series C Preferred Units (regardless of whether previously declared) and (ii) then, any positive value in each such holder’s Capital Account in respect of such Series C Preferred Units; provided, however, that so long as any Series B Preferred Units are Outstanding, no liquidating distribution shall be paid or set aside for payment on any Series C Preferred Units unless and until the full amount of the Series B Liquidation Value has been distributed in respect of Outstanding Series B Preferred Units in accordance with Section 5.10(b)(iv). If in the year of such liquidation and winding up, or sale, exchange, or other disposition of all or substantially all of the assets of the Partnership, any such Record Holder’s Capital Account in respect of such Series C Preferred Units is less than the aggregate Series C Base Liquidation Preference of such Series C Preferred Units, then, after the allocations specified in Section 5.10(b)(iv) have been made, but otherwise notwithstanding anything to the contrary contained in this Agreement, and prior to any other allocation pursuant to this Agreement for such year and any distribution pursuant to the preceding sentence, items of gross income and gain shall be allocated to all Unitholders then holding Series C Preferred Units, Pro Rata, until the Capital Account in respect of each Outstanding Series C Preferred Unit is equal to the Series C Base Liquidation Preference (and no other allocation pursuant to this Agreement shall reverse the effect of such allocation). If in the year of such liquidation, dissolution, or winding up any such Record Holder’s Capital Account in respect of such Series C Preferred Units is less than the aggregate Series C Base Liquidation Preference of such Series C Preferred Units after the application of the preceding sentence, then to the extent permitted by applicable law and after making any allocations required under Section 5.10(b)(iv), but otherwise notwithstanding anything to the contrary contained in this Agreement, items of gross income and gain for any preceding taxable period(s) with respect to which IRS Form 1065 Schedules K-1 have not been filed by the Partnership shall be reallocated to all Unitholders then holding Series C Preferred Units, Pro Rata, until the Capital Account in respect of each such Outstanding Series C Preferred Unit after making allocations pursuant to this and the immediately preceding sentence is equal to the Series C Base Liquidation Preference (and no other allocation pursuant to this Agreement shall reverse the effect of such allocation). After such allocations have been made to the Outstanding Series C Preferred Units, any remaining Net Termination Gain or Net Termination Loss shall be allocated to the Partners pursuant to Section 6.1(c) or Section 6.1(d), as the case may be. At the time of the dissolution of the Partnership, subject to Section 17-804 of the Delaware Act, the Record Holders of the Series C Preferred Units shall become entitled to receive any distributions in respect of the Series C Preferred Units that are accrued and unpaid as of the date of such distribution, and shall have the status of, and shall be entitled to all remedies available to, a creditor of the Partnership, and such entitlement of the Record Holders of the Series C Preferred Units to such accrued and unpaid distributions shall have priority over any entitlement of any other Partners or Assignees with respect to any distributions by the Partnership to such other Partners or Assignees except for distributions in respect of Series B Preferred Units pursuant to Section 5.10(b)(iv); provided, however, that the General Partner, as such, will have no liability for any obligations with respect to such distributions to any Record Holder(s) of Series C Preferred Units.