Purchase Price and Supply of Product
Purchase Price and Supply of Product Sample Clauses
Related to Purchase Price and Supply of Product
Supply of Products 3.1 The Supplier warrants that the Products shall: (a) correspond with their description and any applicable Product Specification; (b) conform in all respects with the Order and any relevant sample; (c) be of satisfactory quality and fit for any purpose held out by the Supplier or made known to the Supplier by Ornua, expressly or by implication, and in this respect Ornua relies on the Supplier's skill and judgement; (d) be manufactured by properly trained and qualified personnel using all reasonable skill, care and diligence and in a good and workmanlike manner; (e) where they are manufactured products, be free from defects in design, materials and workmanship and remain so for the period set out in the Product Specification or, if none is specified, for at least 12 months after delivery; (f) comply with all applicable statutory and regulatory requirements relating to the manufacture, labelling, packaging, storage, handling and delivery of the Products; (g) comply with all relevant standards including any UK Standards, European Standards or International Standards applicable in the UK and the country or State where the Products are to be used; and (h) in the case of Products containing food stuffs, when delivered to Ornua, comply with all applicable food and hygiene legislation and regulations and best industry practice. 3.2 The Supplier shall ensure that at all times it has and maintains all licences, permissions, authorisations, consents and permits needed to carry out its obligations under the Contract in respect of the supply of Products. Breach of this Condition shall be deemed a material breach of the Contract. 3.3 Ornua may inspect and test the Products at any time before delivery. The Supplier shall remain fully responsible for the Products despite any such inspection or testing and any such inspection or testing shall not reduce or otherwise affect the Supplier's obligations under the Contract. 3.4 If following such inspection or testing Ornua considers that the Products do not comply or are unlikely to comply with the Supplier's undertakings at clause 3.1, Ornua shall inform the Supplier and the Supplier shall immediately take such remedial action as is necessary to ensure compliance. 3.5 Ornua may conduct further inspections and tests after the Supplier has carried out its remedial actions.
Supply of Product 4.1 DAEWOONG shall manufacture and supply Product to AEON in a primary packaged and labeled form. Product packaging shall display the logo of DAEWOONG (to the extent required by applicable law) and AEON and the outer label shall be marked using English language in accordance with applicable laws and Product’s Regulatory Approvals. 4.2 AEON’s estimate sales forecast of the Product during the Term of Agreement in the Territory in the Field is set forth in Annex D. Within ninety (90) days after the Effective Date, AEON shall provide DAEWOONG with a non-binding twelve (12) month rolling forecast of its requirements of Product, which the Parties agree is not a commitment to buy any stated quantity. Thereafter, on at least a quarterly basis, AEON shall provide DAEWOONG with an updated twelve (12) month rolling forecast, together with a binding six (6) month forecast to the extent AEON has requested Safety Stock as described in Article 4.10 below. Each such forecast shah be referred to herein as a “Forecast.” 4.3 AEON may from time to time submit Purchase Orders to DAEWOONG for Product in accordance with the forecasting requirements in Article 4.2. Orders will be shipped on CIF Los Angeles port. 4.4 Once a Purchase Order for Product and Product Samples has been received by DAEWOONG, it shall be considered as irrevocable. 4.5 AEON agrees herein to place an Order for Product not later than [***] from receipt of Regulatory Approval. 4.6 Individual Purchase Orders of Product shall be placed at least [***] in advance of the required delivery date. 4.7 For the purpose of Commercialization, AEON will store and maintain the full quantity of Product in a clean, secured area in accordance with the reasonable directions and specifications provided by DAEWOONG in writing in connection thereof in the Territory. AEON will advise DAEWOONG on the applicable requirements specifically deriving from the laws and regulations in the Territory. 4.8 AEON agrees that DAEWOONG and its collaborators and agents, in DAEWOONG’s sole discretion, which collaborators and Agents will be subject to appropriate obligations of confidentiality, will have the right upon reasonable prior notice, to observe and to inspect and to audit AEON’s facility to ascertain compliance by AEON with the terms of this Agreement, including without limitation (a) the holding facilities for Product, and (b) AEON’s compliance with applicable law, including cGMP (if applicable). Following any such audit, DAEWOONG will discuss its observations and conclusions with AEON and corrective actions, if any, will be agreed upon by the Parties, and executed by AEON using Commercially Reasonable Efforts. 4.9 In addition to any other rights and remedies available to AEON, AEON shall have the right to recover lost profits in the event that DAEWOONG fails to deliver at least [***] in any [***] (a “Supply Default Event”). For purposes of this provision, lost profits would be equal to [***] of AEON operating profit (sales less direct expenses and the puce paid by AEON for such Products) on Products that have not been shipped against firm Purchase Orders during the period leading up to the Supply Default Event and bona fide Purchase Orders submitted by AEON that are consistent with the Forecast during the Supply Default Period (as defined below). Such payment shall be made with respect to all Product not shipped in the period giving rise to the Supply Default and for the period until DAEWOONG is again timely shipping Product to meet AEON’s needs (the “Supply Default Period”). The first such payment shall be made within [***] of the Supply Default Event, and every [***] thereafter. AEON agrees to permit full disclosure to DAEWOONG of AEON’s accounting records, solely related to the calculation of lost profits, for the [***] ending on the first day of the month in which the Supply Event Default occurred. In the event that DAEWOONG is unable to supply both AEON’s requirements of Product and its own and third parties’ requirements for Product, DAEWOONG shall allocate Product that DAEWOONG has in inventory and that DAEWOONG is able to Product, so that AEON receives its requirements of Product in priority to DAEWOONG and third parties. 4.10 At the request of AEON, DAEWOONG shall at its own cost and expense during the Term, maintain an amount of inventory of Product equal to AEON’s requirements for Product for [***] based on AEON’s most recent forecast (“Safety Stock”). The Safety Stock shall be (i) maintained for the sole benefit of AEON and its Affiliates, (ii) shall be stored at a secure facility in compliance with GMP, and (iii) shall not be used for the benefit of any other customer of DAEWOONG. DAEWOONG shall rotate the Safety Stock on a “First Expiry-First Out” basis for routine fulfillment of firm orders, subject to Article 7.
Supply Price The Initial Term “Supply Price” for the “Monthly Fixed Price Volume” set forth on Exhibit A shall be $[______]/MWh for the first [***] years of the Initial Term, and thereafter shall be the then-current market price as mutually agreed by Customer and Supplier prior to the end of the [***] year. The Extension Term Supply Price, if any, will be the then-current market price as mutually agreed by Customer and Supplier prior to entering into the Extension Term. Supplier and Customer may agree to fix the Supply Price for one or more periods during the Term that individually and in total are shorter than the full Term. Exhibit A sets forth the hourly delivery volume for which the Energy Price will be fixed during each month of the Term to take into account the phase-in of the facility which is expected to progress at a rate of approximately [***]MW per month (the “Monthly Fixed Price Volume”). Supplier represents that Supplier has used commercially reasonable efforts to set such Supply Price at approximately [***]% discount to the forward price at which Supplier xxxxxx its delivery obligations under this Transaction Confirmation with respect to any financial or physical energy supply arrangement intended to cover the Monthly Fixed Price Volume, the settlement index (ERCOT North Load Zone), and this Transaction Confirmation term. The [***]% discount shall be revised to take into account any physical or software limitations originating from Customer and limiting Supplier’s ability to curtail 100% of the load at the Data Center. Exhibit A also sets forth the minimum load that Customer has designated as not subject to economic curtailment (“Non-Curtailable Load”), which represents, among other things, the Motor Control Center (MCC), and other essential server and administrative load. Customer and Supplier can, in the context of the immediately preceding sentence, agree on a lesser than [***]% discount with respect to the Supply Price to account for Supplier’s incremental cost of providing a fixed Supply Price for Non-Curtailable Load.
Purchase of Products You agree to purchase from Us the hardware products, software licenses and services listed on the Order Form, together with all existing accessories, attachments, replacements, and additions (collectively the “Products”) upon the terms stated herein. For the avoidance of doubt, postage meters for use in mailing machines are excluded from the definition of Products. This Purchase Agreement is binding on You as of the date You sign it. This Purchase Agreement is not binding on Us until We sign it or until the Products are shipped, whichever happens first.
Forecasts and Purchase Orders (a) Following Regulatory Approval of one of the Initial Products during the term of this Agreement, Reliant shall provide to ASL no later than the first day of the first month of each calendar quarter a non-binding good faith estimate (“Quarterly Forecast”) by quarter of Reliant’s requirements for the Active Ingredient for the calendar quarter and the succeeding three (3) calendar quarters. Reliant will be obligated to purchase 75% of the quantities of API forecasted for the first two (2) succeeding calendar quarters of each Quarterly Forecast. Within (30) days of Regulatory Approval, Reliant shall provide an initial forecast (“Initial Forecast”) for the four calendar quarters following Regulatory Approval. (b) Reliant shall place binding purchase orders for Active Ingredient by written or electronic purchase order (or by any other means agreed to by the parties) to ASL, which shall be placed at least ninety (90) days prior to desired date of delivery. (c) ASL shall be obligated to supply Active Ingredient as ordered by Reliant. To the extent purchase orders in any calendar month exceed One Hundred Fifty percent (150%) of the Quarterly Forecast for the relevant quarter, ASL shall use its best efforts to supply 125% of the quantity ordered. (d) ASL shall maintain minimum inventory levels equal to the binding portion of the then current Quarterly Forecast. The Active Ingredient shall be shipped C.I.F. Duty Unpaid to a Designated Facility or other location agreed by the parties. Active Ingredient shall be shipped upon completion of production in temperature-controlled vehicles in accordance with the specifications including light protecting containers and the Quality Agreement in order to maintain the quality of the Active Ingredient. Carriers selected by ASL must be commercially reputable, able to track shipments and fully insured with adequate coverage to replace the value of the goods shipped. Title and risk of loss pass on delivery to the Designated Facility. (e) All shipments of Active Ingredient shall be accompanied by a packing slip and a certificate of analysis which describes the Active Ingredient, states the purchase order number, confirms that the Active Ingredient conforms in all ways with the Specifications, the Process Description and was manufactured in accordance with GMP and all other requirements of the Act. To the extent of any conflict or inconsistency between this Agreement and any purchase order, purchase order release, confirmation, acceptance or any similar document, the terms of this Agreement shall govern. (f) Reliant shall notify ASL of any short-shipment claims within thirty (30) days of receipt of a shipment of Active Ingredient. (g) ASL shall not be obligated to accept any returns of Active Ingredient other than as a result of such Active Ingredient failing to meet the Specifications in accordance with Section 2.9(a), was not manufactured in accordance with GMP, or does not otherwise comply with the manufacturing, storage and/or transportation requirements of the Act.
PURCHASE PRICE & TERMS The Buyer agrees to purchase the Property by payment of US Dollars ($ ) as follows: (check one) ☐ - All Cash Offer. No loan or financing of any kind is required in order to purchase the Property. Buyer shall provide Seller written third (3rd) party documentation verifying sufficient funds to close no later than , 20 , at : ☐ AM ☐ PM. Seller shall have three (3) business days after the receipt of such documentation to notify Buyer, in writing, if the verification of funds is not acceptable. If Buyer fails to provide such documentation, or if Seller finds such verification of funds is not acceptable, Seller may terminate this Agreement. Failure of Seller to provide Buyer written notice of objection to such verification shall be considered acceptance of verification of funds.
Manufacture of Products All Products marketed through Grantor's Web ------------------------- Site shall be manufactured, packaged, prepared, and shipped in accordance with the specifications and requirements described on Exhibit A hereto as it may be modified from time to time. Quality control standards relating to the Product's weight, color, consistency, micro-biological content, labeling and packaging are also set forth on Exhibit A. In the event that Exhibit A is incomplete, Products shall be manufactured and shipped in accordance with industry standards.
Manufacturing and Supply (a) Depomed shall supply Product for use in conducting Depomed’s development activities for Product in the Field and in the Territory as set forth in Exhibit D. (b) During the four-year period beginning on the Effective Date (the “Supply Period”), Depomed shall supply and package (or have supplied and packaged) Product pursuant to this Section 4.8. Depomed will use commercially reasonable efforts to enter into a long-term Product supply agreement with [***] days after the Effective Date (the “Depomed Supply Agreement”) that will be freely assignable to Solvay or its Affiliates, successors or assigns at any time. In addition, Depomed and Solvay will negotiate and enter into a Product supply agreement with business terms substantially similar to the Depomed Supply Agreement concurrently with the execution and delivery by Depomed and [***] of the Depomed Supply Agreement (the “Solvay Supply Agreement”, and, together with the Depomed Supply Agreement, the “Supply Agreements”). The Supply Agreements will, together, contain the following provisions (among others mutually agreeable to the Parties): (i) Under the Solvay Supply Agreement, Depomed will agree to supply Solvay with its requirements of finished, packaged Product during the Supply Period; (ii) All manufacturing and records will be performed and maintained in accordance with specifications, cGMP and Applicable Law; (iii) Depomed will provide reasonable assistance to Solvay in the event Solvay wishes to qualify a backup Product manufacturer; (iv) Depomed shall [***]; (v) Solvay will pay Depomed the following amounts in connection with all activities performed by or on behalf of Depomed associated with Product manufacture and supply (other than activities specified on Exhibit D) (A) [***]% of Depomed’s out-of-pocket costs incurred in connection with such manufacture and supply of Product to Solvay, and (B) a labor charge equal to the FTE Charges for all Depomed employees allocated to the manufacture and supply of Product to Solvay, not to exceed FTE Charges for an aggregate of [***] during any given calendar quarter (and Depomed shall provide to Solvay periodic reports detailing the FTE Charges for which Solvay must pay Depomed hereunder);
Purchase Price Allocation Not more than one hundred eighty (180) days after the Closing Date, Buyer will deliver to the Members a schedule allocating the Base Purchase Price (as adjusted pursuant to Section 2.3.2) as provided in this Section 2.6. As soon as practicable after payment of each of (a) the Final Working Capital Adjustment, (b) the Earnout Amount for the fiscal year ended December 31, 2013, (c) the Earnout Amount for the fiscal year ended December 31, 2014, and (d) the Earnout Amount for the fiscal year ended December 31, 2015, Buyer will deliver to the Members a schedule allocating each such payment in accordance with this Section 2.6. Buyer and the Members agree that the aggregate amount of (a) the Base Purchase Price (as adjusted pursuant to Section 2.3.2), plus (b) the Final Working Capital Adjustment, plus (c) any Earnout Amount received shall be allocated in the following amounts or consistent with the following methodology: (a) first, to the tangible assets of the Company, (b) second, an amount not to exceed Six Hundred Thousand Dollars ($600,000) shall be allocated, solely for Tax purposes, to the non-compete described in Section 6.14, and (c) third, any remaining amount shall be allocated to goodwill and other intangible assets. Except as otherwise required by law or pursuant to a “determination” under Section 1313(a) of the Code, Buyer and the Members agree to act, and will act, and will cause their Affiliates to act, in accordance with such allocations for purposes of all income Taxes, and neither Buyer nor the Members will take any position inconsistent therewith in any Tax Return or similar filings (including IRS Form 8594), any refund claim, any litigation, or otherwise. The Parties acknowledge and agree that the allocation of the Purchase Price as set forth above shall not limit the amount of damages that Buyer may seek for any breach of the covenants contained in Article VI.
Purchase Price; Allocation of Purchase Price (a) The purchase price for the Purchased Assets (the “Purchase Price”) is equal to $675,000,000 in cash. The Purchase Price shall be paid as provided in Section 2.07 and shall be subject to adjustment as provided in Section 2.08. Seller shall be treated as receiving a portion of the Purchase Price as agent for any of its Affiliates actually selling, transferring or conveying the Purchased Assets, consistent with the allocation of the Purchase Price pursuant to the Allocation Statement, and Buyer’s payment of the Purchase Price to Seller shall constitute payment by Buyer to any of Seller’s Affiliates actually selling, transferring or conveying the Purchased Assets hereunder. (b) Within 60 days after the Closing, Buyer shall deliver to Seller a statement (the “Allocation Statement”) allocating the Purchase Price (plus Assumed Liabilities and transaction costs, to the extent properly taken into account under Section 1060 of the Code) among the Purchased Assets in accordance with Section 1060 of the Code. If, within five Business Days after delivery of the Allocation Statement, Seller notifies Buyer in writing that Seller objects to the allocation set forth in the Allocation Statement, Buyer and Seller shall use commercially reasonable efforts to resolve such dispute within 20 days. In the event that Buyer and Seller are unable to resolve such dispute within 20 days, Buyer and Seller shall jointly retain KPMG LLP (the “Accounting Referee”) to resolve the disputed items in the manner described in Section 8.10. (c) Each of Buyer and Seller shall (i) be bound by the Allocation Statement, as may be adjusted in accordance with Section 2.06(e), (ii) act in accordance with, and cause its Affiliates to act in accordance with, the Allocation Statement in the preparation, filing and audit of any Tax Return (including filing IRS Form 8594 with its federal Income Tax Return for the taxable year that includes the Closing) and (iii) take no position, and cause its Affiliates to take no position, inconsistent with the allocation reflected on the Allocation Statement on any Tax Return, in any Contest or otherwise, unless required by a Final Determination. (d) In the event that the allocation reflected on the Allocation Statement is disputed by any Taxing Authority, the party receiving notice of the dispute shall promptly notify the other party hereto, and Buyer and Seller shall use their commercially reasonable efforts to defend such allocation in any Tax audit or similar proceeding. (e) If an adjustment is made with respect to the Purchase Price pursuant to Section 2.08, the Allocation Statement shall be adjusted in accordance with Section 1060 of the Code and as mutually agreed by Buyer and Seller. In the event that an agreement is not reached within 20 days after the determination of the Final Closing Working Capital, any disputed items shall be resolved in the manner described in Section 8.10. Buyer and Seller shall file any additional information return required to be filed pursuant to Section 1060 of the Code and to treat the Allocation Statement as adjusted in the manner described in Section 2.06(c). (f) Not later than 30 days prior to the filing of their respective Forms 8594 relating to this transaction, each party shall deliver to the other party a copy of its Form 8594.
