Annual Compliance Statements The Master Servicer, the Special Servicer, the Certificate Administrator, the Custodian and, if it has made an Advance during the applicable calendar year, the Trustee shall furnish (and each of the Master Servicer, the Special Servicer, the Custodian and the Certificate Administrator (i) with respect to any Additional Servicer of such party that is a Mortgage Loan Seller Sub-Servicer, shall use commercially reasonable efforts to cause such Additional Servicer to furnish, and (ii) with respect to any other Additional Servicer of such party (other than any party to this Agreement), shall cause such Additional Servicer to furnish) (each such Additional Servicer and each of the Master Servicer, the Special Servicer, the Custodian, the Certificate Administrator and the Trustee (if applicable), a “Certifying Servicer”) to the Certificate Administrator, the Serviced Companion Loan Holders (or, in the case of a Serviced Companion Loan that is part of an Other Securitization Trust, the applicable Other Depositor and Other Exchange Act Reporting Party), the Operating Advisor (only in the case of an Officer’s Certificate furnished by the Special Servicer and after the occurrence and during the continuance of a Control Termination Event) and the Depositor on or before March 1 of each year, commencing in March 2017, an Officer’s Certificate (together with a copy thereof in XXXXX compatible format, or in such other format as otherwise agreed upon by the Depositor, the Certificate Administrator, the applicable Other Depositor, the applicable Other Exchange Act Reporting Party and the applicable Certifying Servicer) stating, as to the signer thereof, that (A) a review of such Certifying Servicer’s activities during the preceding calendar year or portion thereof and of such Certifying Servicer’s performance under this Agreement, or the applicable Sub-Servicing Agreement or primary servicing agreement in the case of an Additional Servicer, has been made under such officer’s supervision and (B) to the best of such officer’s knowledge, based on such review, such Certifying Servicer has fulfilled all its obligations under this Agreement, or the applicable Sub-Servicing Agreement or primary servicing agreement in the case of an Additional Servicer, in all material respects throughout such year or portion thereof, or, if there has been a failure to fulfill any such obligation in any material respect, specifying each such failure known to such officer and the nature and status thereof. The Master Servicer and the Special Servicer shall, and the Master Servicer and the Special Servicer shall cause (or, in the case of an Additional Servicer that is a Mortgage Loan Seller Sub-Servicer, shall use its commercially reasonable efforts to cause) each Additional Servicer hired by it to, forward a copy of each such statement to, prior to the occurrence and continuance of a Consultation Termination Event, the Controlling Class Representative and, for posting to the Rule 17g-5 Information Provider’s Website pursuant to Section 12.13, the Rule 17g-5 Information Provider. Promptly after receipt of each such Officer’s Certificate, the Depositor (and, in the case of a Serviced Companion Loan that is part of an Other Securitization Trust, the applicable Other Depositor and Other Exchange Act Reporting Party) may review each such Officer’s Certificate and, if applicable, consult with the Certifying Servicer, as applicable, as to the nature of any failures by such Certifying Servicer, respectively, or any related Additional Servicer with which the Master Servicer or the Special Servicer, as applicable, has entered into a servicing relationship with respect to the Mortgage Loans or the Companion Loans in the fulfillment of any Certifying Servicer’s obligations hereunder or under the applicable sub-servicing or primary servicing agreement. The obligations of each Certifying Servicer under this Section apply to each Certifying Servicer that serviced a Mortgage Loan or Companion Loan during the applicable period, whether or not the Certifying Servicer is acting in such capacity at the time such Officer’s Certificate is required to be delivered. With respect to each Outside Serviced Mortgage Loan serviced under the applicable Outside Servicing Agreement, the Certificate Administrator shall request, and upon receipt deliver to the Depositor, from a “Servicing Officer” or “Responsible Officer” (as such terms are defined in the applicable Outside Servicing Agreement), as applicable, of the related Outside Servicer, Outside Special Servicer, Outside Custodian, Outside Trustee and Outside Paying Agent or Outside Certificate Administrator an Officer’s Certificate in form and substance similar to the Officer’s Certificate described in this Section or such other form as is set forth in the Outside Servicing Agreement.
Contract Quarterly Sales Reports The Contractor shall submit complete Quarterly Sales Reports to the Department’s Contract Manager within 30 calendar days after the close of each State fiscal quarter (the State’s fiscal quarters close on September 30, December 31, March 31, and June 30). Reports must be submitted in MS Excel using the DMS Quarterly Sales Report Format, which can be accessed at xxxxx://xxx.xxx.xxxxxxxxx.xxx/business_operations/ state_purchasing/vendor_resources/quarterly_sales_report_format. Initiation and submission of the most recent version of the Quarterly Sales Report posted on the DMS website is the responsibility of the Contractor without prompting or notification from the Department’s Contract Manager. If no orders are received during the quarter, the Contractor must email the DMS Contract Manager confirming there was no activity.
Minimum Site Requirements for TIPS Sales (when applicable to TIPS Sale). Cleanup: When performing work on site at a TIPS Member’s property, Vendor shall clean up and remove all debris and rubbish resulting from their work as required or directed by the TIPS Member or as agreed by the parties. Upon completion of work, the premises shall be left in good repair and an orderly, neat, clean and unobstructed condition. Preparation: Vendor shall not begin a project for which a TIPS Member has not prepared the site, unless Vendor does the preparation work at no cost, or until TIPS Member includes the cost of site preparation in the TIPS Sale Site preparation includes, but is not limited to: moving furniture, installing wiring for networks or power, and similar pre‐installation requirements. Registered Sex Offender Restrictions: For work to be performed at schools, Vendor agrees that no employee of Vendor or a subcontractor who has been adjudicated to be a registered sex offender will perform work at any time when students are, or reasonably expected to be, present unless otherwise agreed by the TIPS Member. Vendor agrees that a violation of this condition shall be considered a material breach and may result in the cancellation of the TIPS Sale at the TIPS Member’s discretion. Vendor must identify any additional costs associated with compliance of this term. If no costs are specified, compliance with this term will be provided at no additional charge. Safety Measures: Vendor shall take all reasonable precautions for the safety of employees on the worksite, and shall erect and properly maintain all necessary safeguards for protection of workers and the public. Vendor shall post warning signs against all hazards created by the operation and work in progress. Proper precautions shall be taken pursuant to state law and standard practices to protect workers, general public and existing structures from injury or damage. Smoking: Persons working under Agreement shall adhere to the TIPS Member’s or local smoking statutes, codes, ordinances, and policies.
Payment for Material Completion The Contractor may request payment of the remaining contract balance, including retainage, less amounts credited the Owner or incurred as liquidated damages, and less amounts withheld for the Punchlist by reason of Minor Items or Permitted Incomplete Work (See Paragraph 6.5.3.2). Payment for Material Completion shall be made by a check payable jointly to the Contractor and Surety and shall be mailed to the Surety.
Development Milestone Payments Pfizer shall make the payments set forth below within [**] days (or [**] days after [**] following the first occurrence of each event described below for a Licensed Product Covered by a Valid Claim that achieves such milestone (each event a “Development Milestone” and each payment a “Development Milestone Payment”). Development Milestone Development Milestone Payment [**] [**] [**] [**] [**] [**] [**] [**] [**] [**] [**] [**] [**] [**] [**] [**] [**] [**] [**]. The Development Milestone Payment in clause (2) of this Section 3.3 may become payable as set forth in Section 4.6. Whether or not the Development Milestone in clause (2) of this Section 3.3 is achieved, the Development Milestone Payment in clause (2) shall, pursuant to Section 4.6, in all cases become payable prior to the time the Development Milestone Payment in clause (3) of this Section 3.3 becomes payable. With respect to the Development Milestone in clause (3) of this Section 3.3, in the case of a [**] that is determined to have become [**], such Development Milestone, if achieved based on such [**], shall be achieved upon [**]; provided, however, if either [**], such Development Milestone shall be deemed to have been met on the date of such determination. With respect to the Development Milestone in clause (8) of this Section 3.3, such Development Milestone will be paid in [**], provided that if such Licensed Product [**]. (For the avoidance of doubt, all payment [**] that became payable prior to such [**] shall continue to be payable and there shall be [**] of the [**] Development Milestone Payment will be deemed to have been achieved and payable on [**], and will be paid by Pfizer within [**] days thereafter, until the earlier of [**]. For example, [**] of such Development Milestone, such Development Milestone Payment would be paid [**] of the Development Milestone [**]. For the avoidance of doubt: (a) except for (i) the Development Milestone Payment set forth in clause (6) of this Section 3.3 [**], (ii) the Development Milestone Payment set forth in clause (8) of this Section 3.3 [**] and (iii) the Development Milestone Payment set forth in clause (9) of this Section 3.3 [**], each Development Milestone Payment shall be payable only once upon achievement of the applicable Development Milestone and only on the first occurrence of the corresponding Development Milestone regardless of the number of Licensed Products and (b) satisfaction of a Development Milestone by an Affiliate or by a sublicensee or assignee of, or Third Party retained by, Pfizer or its Affiliates shall be deemed to have been satisfied by Pfizer for the purposes of this Section 3.3.
Quarterly Progress Reports The goal of this task is to periodically verify that satisfactory and continued progress is made towards achieving the objectives of this Agreement on time and within budget. The objectives of this task are to summarize activities performed during the reporting period, to identify activities planned for the next reporting period, to identify issues that may affect performance and expenditures, and to form the basis for determining whether invoices are consistent with work performed. • Prepare a Quarterly Progress Report which summarizes all Agreement activities conducted by the Recipient for the reporting period, including an assessment of the ability to complete the Agreement within the current budget and any anticipated cost overruns. Progress reports are due to the CAM the 10th day of each January, April, July, and October. The Quarterly Progress Report template can be found on the ECAMS Resources webpage available at xxxxx://xxx.xxxxxx.xx.xxx/media/4691. • Quarterly Progress Reports
Contractor Sales Reporting Vendor Management Fee Contractor Reports Cooperative Master Contract Sales Reporting. Contractor shall report total Cooperative Master Contract sales quarterly to Enterprise Services, as set forth below. Cooperative Master Contract Sales Reporting System. Contractor shall report quarterly Cooperative Master Contract sales in Enterprise Services’ Cooperative Master Contract Sales Reporting System. Enterprise Services will provide Contractor with a login password and a vendor number. The password and vendor number will be provided to the Sales Reporting Representative(s) listed on Contractor’s Bidder Profile. Data. Each sales report must identify every authorized Purchaser by name as it is known to Enterprise Services and its total combined sales amount invoiced during the reporting period (i.e., sales of an entire agency or political subdivision, not its individual subsections). The “Miscellaneous” option may be used only with prior approval by Enterprise Services. Upon request, Contractor shall provide contact information for all authorized Purchasers specified herein during the term of the Cooperative Master Contract. If there are no Cooperative Master Contract sales during the reporting period, Contractor must report zero sales. Due dates for Cooperative Master Contract Sales Reporting. Quarterly Cooperative Master Contract Sales Reports must be submitted electronically by the following deadlines for all Cooperative Master Contract sales invoiced during the applicable calendar quarter: Vendor Management Fee. Contractor shall pay to Enterprise Services a vendor management fee (“VMF”) of 1.5 percent on the purchase price for all Cooperative Master Contract sales (the purchase price is the total invoice price less applicable sales tax). The sum owed by Contractor to Enterprise Services as a result of the VMF is calculated as follows: Amount owed to Enterprise Services = Total Cooperative Master Contract sales invoiced (not including sales tax) x .015. The VMF must be rolled into Contractor’s current pricing. The VMF must not be shown as a separate line item on any invoice unless specifically requested and approved by Enterprise Services. Enterprise Services will invoice Contractor quarterly based on Cooperative Master Contract sales reported by Contractor. Contractor is not to remit payment until Contractor receives an invoice from Enterprise Services. Contractor’s VMF payment to Enterprise Services must reference this Cooperative Master Contract number, the year and quarter for which the VMF is being remitted, and Contractor’s name as set forth in this Cooperative Master Contract, if not already included on the face of the check. Contractor’s failure to report accurate total net Cooperative Master Contract sales, to submit a timely Cooperative Master Contract sales report, or to remit timely payment of the VMF to Enterprise Services, may be cause for Enterprise Services to suspend Contractor or terminate this Cooperative Master Contract or exercise remedies provided by law. Without limiting any other available remedies, the parties agree that Contractor’s failure to remit to Enterprise Services timely payment of the VMF shall obligate Contractor to pay to Enterprise Services, to offset the administrative and transaction costs incurred by the State to identify, process, and collect such sums, the sum of $200.00 or twenty-five percent (25%) of the outstanding amount, whichever is greater, or the maximum allowed by law, if less. Enterprise Services reserves the right, upon thirty (30) calendar days advance written notice, to increase, reduce, or eliminate the VMF for subsequent purchases, and reserves the right to renegotiate Cooperative Master Contract pricing with Contractor when any subsequent adjustment of the VMF might justify a change in pricing. Annual Cooperative Master Contract Sales Report. Contractor shall provide to Enterprise Services a detailed annual Cooperative Master Contract sales report. Such report shall include, at a minimum: the Goods/Services sold (including, as applicable, item number or other identifier), per unit quantities sold, items and volumes purchased by Purchaser, shipment/delivery locations by Purchaser, and Cooperative Master Contract price. This report must be provided in an electronic format that can be read by Microsoft (MS) Excel. Such report is due within thirty (30) calendar days of the annual anniversary of the effective date of this Cooperative Master Contract.
Development Milestones In addition to its obligations under Paragraph 7.1, LICENSEE specifically commits to achieving (either itself or through the acts of a SUBLICENSEE) the following development milestones in its diligence activities under this AGREEMENT: (a) (b).
Distribution Compliance Period The Purchaser agrees not to resell, pledge or transfer any Purchased Shares within the United States or to any U.S. Person, as each of those terms is defined in Regulation S, during the 40 days following the Closing Date.
Reporting TIPS Sales Vendor must report all TIPS Sales to TIPS. If a TIPS sale is initiated by Vendor receiving a TIPS Member’s purchase order from TIPS directly, Vendor may consider that specific TIPS Sale reported. Otherwise, with the exception of TIPS Automated Vendors, who have signed an exclusive agreement with TIPS regarding reporting, all TIPS Sales must be reported to TIPS by either: (1) Emailing the purchase order or similar purchase document (with Vendor’s Name, as known to TIPS, and the TIPS Contract Name and Number included) to TIPS at xxxxxx@xxxx-xxx.xxx with “Confirmation Only” in the subject line of the email within three business days of Vendor’s acceptance of the order, or; (2) Within 3 business days of the order being accepted by Vendor, Vendor must login to the TIPS Vendor Portal and successfully self-report all necessary sale information within the Vendor Portal and confirm that it shows up accurately on your current Vendor Portal statement. No other method of reporting is acceptable unless agreed to by the Parties in writing. Failure to report all sales pursuant to this provision may result in immediate cancellation of Vendor’s TIPS Contract(s) for cause at TIPS’ sole discretion. Please refer to the TIPS Accounting FAQ’s for more information about reporting sales and if you have further questions, contact the Accounting Team at xxxxxxxxxx@xxxx-xxx.xxx.
