Common use of Requirements and Liabilities Clause in Contracts

Requirements and Liabilities. A. All Workers must complete a sign-in sheet before beginning work. B. Each of the participating JBEs will have a designated Project Manager. Prior to each scheduled move, the Contractor will be required to provide a quote per fees in Exhibit B of the master agreement, to the requesting JBE Project Manager for each move date based on the list of move work requested. A purchase order will then be created based on the quote for each move date. C. Contractor must adhere to specific list of move work provided by the JBEs Project Manager and do not conduct any move work requested by other JBEs staff without permission from the JBEs Project Manager or move coordinator contact. D. Contractor must be flexible in case of urgent requests. E. All move staff must wear identifiable shirts, hats, etc. to clearly distinguish them as working staff. All move staff are subject to complete internal background investigations. Contractor or each mover shall be responsible paying the fingerprint processing fee to Live Scan operator. F. Contractor must not outsource of any services without written approval from the JBEs Project Manager. • A Project Manager will be designated for each JBE, respectively. G. Contractor must have the ability to work with DGS Building Manager and abide by rules and regulations of DGS building management. The DGS building’s moving policy and loading dock specifications, listing hours of access and restrictions on types of vehicles admitted to the loading dock, is included as Attachment 2, Building Moving Policy for DGS Building. H. The loading dock is located on Xxxxxx Street between Golden Gate Avenue and XxXxxxxxxx Street. Maximum height is 13 feet, loading platform height is 42 inches, and no carriage with an underbelly can access the loading dock. Unless making a delivery or pick up at the facility, Contractor can not park in the loading dock and must find parking in the surrounding area at Contractor’s expense. I. Contractor shall have insurance to cover damages for any possible loss or damage while property is under the protection of the Contractor as well as for damage to any fixed property. Contractor shall be responsible for the satisfactory repair, or replacement (at the option of the JBEs) of any property that is lost, damaged or stolen while in Contractor’s custody and for the satisfactory repair of any damage to buildings or grounds. J. Contractor must provide to the JBEs proof of Motor Carrier Permit issued by the California Department of Motor Vehicles or Household Goods Carrier permit issued by the California Public Utilities Commission annually.

Requirements and Liabilities. A. All Workers must complete a sign-in sheet before beginning work. B. Each of the participating JBEs will have a designated Project Manager. Prior to each scheduled move, the Contractor will be required to provide a quote per fees in Exhibit B of the master agreement, to the requesting JBE Project Manager for each move date based on the list of move work requested. A purchase order will then be created based on the quote for each move date. C. Contractor must adhere to specific list of move work provided by the JBEs Project Manager and do not conduct any move work requested by other JBEs staff without permission from the JBEs Project Manager or move coordinator contact. D. Contractor must be flexible in case of urgent requests. E. All move staff must wear identifiable shirts, hats, etc. to clearly distinguish them as working staff. All move staff are subject to complete internal background investigations. Contractor or each mover shall be responsible paying the fingerprint processing fee to Live Scan operator. F. Contractor must not outsource of any services without written approval from the JBEs Project Manager. • A Project Manager will be designated for each JBE, respectively. G. Contractor must have the ability to work with DGS Building Manager the building managers and must abide by rules and regulations of DGS the building management. The DGS management and building’s moving policy and loading dock specifications, listing hours of access and restrictions on types of vehicles admitted to the loading dock, is included as Attachment 2, Building Moving Policy for DGS Building. H. The loading dock is located on Xxxxxx Street between Golden Gate Avenue and XxXxxxxxxx Street. Maximum height is 13 feet, loading platform height is 42 inches, and no carriage with an underbelly can access the loading dock. Unless making a delivery or pick up at the facility, Contractor can not park in the loading dock and must find parking in the surrounding area at Contractor’s expense. I. Contractor shall have insurance to cover damages for any possible loss or damage while property is under the protection of the Contractor as well as for damage to any fixed property. Contractor shall be responsible for the satisfactory repair, or replacement (at the option of the JBEs) of any property that is lost, damaged or stolen while in Contractor’s custody and for the satisfactory repair of any damage to buildings or grounds. J. I. Contractor must provide to the JBEs proof of Motor Carrier Permit issued by the California Department of Motor Vehicles or and Household Goods Carrier permit issued by the California Public Utilities Commission annually.

Requirements and Liabilities. A. All Workers must complete a sign-in sheet before beginning work. B. Each of the participating JBEs will have a designated Project Manager. Prior to each scheduled move, the Contractor will be required to provide a quote per fees in Exhibit B of the master agreement, to the requesting JBE Project Manager for each move date based on the list of move work requested. A purchase order will then be created based on the quote for each move date. C. Contractor must adhere to specific list of move work provided by the JBEs Project Manager and do not conduct any move work requested by other JBEs staff without permission from the JBEs Project Manager or move coordinator contact. D. Contractor must be flexible in case of urgent requests. E. All move staff must wear identifiable shirts, hats, etc. to clearly distinguish them as working staff. All move staff are subject to complete internal background investigations. Contractor or each mover shall be responsible paying the fingerprint processing fee to Live Scan operator. F. Contractor must not outsource of any services without written approval from the JBEs Project Manager. • A Project Manager will be designated for each JBE, respectively. G. Contractor must have the ability to work with DGS Building Manager the building managers and must abide by rules and regulations of DGS the building management. The DGS management and building’s moving policy and loading dock specifications, listing hours of access and restrictions on types of vehicles admitted to the loading dock, is included as Attachment 2, Building Moving Policy for DGS Building. H. The loading dock is located on Xxxxxx Street between Golden Gate Avenue and XxXxxxxxxx Street. Maximum height is 13 feet, loading platform height is 42 inches, and no carriage with an underbelly can access the loading dock. Unless making a delivery or pick up at the facility, Contractor can not park in the loading dock and must find parking in the surrounding area at Contractor’s expense. I. Contractor shall have insurance to cover damages for any possible loss or damage while property is under the protection of the Contractor as well as for damage to any fixed property. Contractor shall be responsible for the satisfactory repair, or replacement (at the option of the JBEs) of any property that is lost, damaged or stolen while in Contractor’s custody and for the satisfactory repair of any damage to buildings or grounds. J. I. Contractor must provide to the JBEs proof of Motor Carrier Permit issued by the California Department of Motor Vehicles or and Household Goods Carrier permit issued by the California Public Utilities Commission annually.

Requirements and Liabilities. A. All Workers must complete a sign-in sheet before beginning work. B. Each of the participating JBEs will have a designated Project Manager. Prior to each scheduled move, the Contractor will be required to provide a quote per fees in Exhibit B of the master agreement, to the requesting JBE Project Manager for each move date based on the list of move work requested. A purchase order will then be created based on the quote for each move date. C. Contractor must adhere to specific list of move work provided by the JBEs Project Manager and do not conduct any move work requested by other JBEs staff without permission from the JBEs Project Manager or move coordinator contact. D. Contractor must be flexible in case of urgent requests. E. All move staff must wear identifiable shirts, hats, etc. to clearly distinguish them as working staff. All move staff are subject to complete internal background investigations. Contractor or each mover shall be responsible paying the fingerprint processing fee to Live Scan operator. F. Contractor must not outsource of any services without written approval from the JBEs Project Manager. •  A Project Manager will be designated for each JBE, respectively. G. Contractor must have the ability to work with DGS Building Manager and abide by rules and regulations of DGS building management. The DGS building’s moving policy and loading dock specifications, listing hours of access and restrictions on types of vehicles admitted to the loading dock, is included as Attachment 2, Building Moving Policy for DGS Building. H. The loading dock is located on Xxxxxx Street between Golden Gate Avenue and XxXxxxxxxx Street. Maximum height is 13 feet, loading platform height is 42 inches, and no carriage with an underbelly can access the loading dock. Unless making a delivery or pick up at the facility, Contractor can not park in the loading dock and must find parking in the surrounding area at Contractor’s expense. I. Contractor shall have insurance to cover damages for any possible loss or damage while property is under the protection of the Contractor as well as for damage to any fixed property. Contractor shall be responsible for the satisfactory repair, or replacement (at the option of the JBEs) of any property that is lost, damaged or stolen while in Contractor’s custody and for the satisfactory repair of any damage to buildings or grounds. J. Contractor must provide to the JBEs proof of Motor Carrier Permit issued by the California Department of Motor Vehicles or Household Goods Carrier permit issued by the California Public Utilities Commission annually.

Requirements and Liabilities. A. All Workers must complete a sign-in sheet before beginning work. B. Each of the participating JBEs will have a designated Project Manager. Prior to each scheduled move, the Contractor will be required to provide a quote per fees in Exhibit B of the master agreement, to the requesting JBE Project Manager for each move date based on the list of move work requested. A purchase order will then be created based on the quote for each move date. C. Contractor must adhere to specific list of move work provided by the JBEs Project Manager and do not conduct any move work requested by other JBEs staff without permission from the JBEs Project Manager or move coordinator contact. D. Contractor must be flexible in case of urgent requests. E. All move staff must wear identifiable shirts, hats, etc. to clearly distinguish them as working staff. All move staff are subject to complete internal background investigations. Contractor or each mover shall be responsible paying the fingerprint processing fee to Live Scan operator. F. Contractor must not outsource of any services without written approval from the JBEs Project Manager. • A Project Manager will be designated for each JBE, respectively. G. Contractor must have the ability to work with DGS Building Manager and abide by rules and regulations of DGS building management. The DGS building’s moving policy and loading dock specifications, listing hours of access and restrictions on types of vehicles admitted to the loading dock, is included as Attachment 2, Building Moving Policy for DGS Building. H. The loading dock is located on Xxxxxx Street between Golden Gate Avenue and XxXxxxxxxx Street. Maximum height is 13 feet, loading platform height is 42 inches, and no carriage with an underbelly can access the loading dock. Unless making a delivery or pick up at the facility, Contractor can not park in the loading dock and must find parking in the surrounding area at Contractor’s expense. I. Contractor shall have insurance to cover damages for any possible loss or damage while property is under the protection of the Contractor as well as for damage to any fixed property. Contractor shall be responsible for the satisfactory repair, or replacement (at the option of the JBEs) of any property that is lost, damaged or stolen while in Contractor’s 's custody and for the satisfactory repair of any damage to buildings or grounds. J. H. Contractor must provide to the JBEs proof of Motor Carrier Permit issued by the California Department of Motor Vehicles or Household Goods Carrier permit issued by the California Public Utilities Commission annually.

Requirements and Liabilities. A. All Workers must complete a sign-in sheet before beginning work. B. Each of the participating JBEs will have a designated Project Manager. Prior to each scheduled move, the Contractor will be required to provide a quote per fees in Exhibit B of the master agreement, to the requesting JBE Project Manager for each move date based on the list of move work requested. A purchase order will then be created based on the quote for each move date. C. Contractor must adhere to specific list of move work provided by the JBEs Project Manager and do not conduct any move work requested by other JBEs staff without permission from the JBEs Project Manager or move coordinator contact. D. Contractor must be flexible in case of urgent requests. E. All move staff must wear identifiable shirts, hats, etc. to clearly distinguish them as working staff. All move staff are subject to complete internal background investigations. Contractor or each mover shall be responsible paying the fingerprint processing fee to Live Scan operator. F. Contractor must not outsource of any services without written approval from the JBEs Project Manager. • A Project Manager will be designated for each JBE, respectively. G. Contractor must have the ability to work with DGS Building Manager and abide by rules and regulations of DGS building management. The DGS building’s 's moving policy and loading dock specifications, listing hours of access and restrictions on types of vehicles admitted to the loading dock, is included as Attachment 2, Building Moving Policy for DGS Building. H. The loading dock is located on Xxxxxx Street between Golden Gate Avenue A venue and XxXxxxxxxx Street. Maximum height is 13 feet, loading platform height is 42 inches, and no carriage with an underbelly can access the loading dock. Maximum vehicle length is 30 feet. Unless making a delivery or pick up at the facility, Contractor can cannot park in the loading dock and must find parking in the surrounding area at Contractor’s 's expense. I. Contractor shall have insurance to cover damages for any possible loss or damage while property is under the protection of the Contractor as well as for damage to any fixed property. Contractor shall be responsible for the satisfactory repair, or replacement (at the option of the JBEs) of any property that is lost, damaged or stolen while in Contractor’s 's custody and for the satisfactory repair of any damage to buildings or grounds. J. Contractor must provide to the JBEs proof of Motor Carrier Permit issued by the California Department of Motor Vehicles or Household Goods Carrier permit issued by the California Public Utilities Commission annually.