Common use of Requirements for FBL Products Clause in Contracts

Requirements for FBL Products. A. FBL Products shall comply with LEI’s requirements as notified on the BMS Portal, Seller Center or Lazada University. For purposes of this LSA, BMS Portal means the FBL Business Management System which allows the user to manage their inventory, available at BMS Portal. These requirements include (but are not limited to): (i) minimum expiry dates or periods; (ii) packaging requirements to ensure the integrity of the FBL Products delivered to LEI’s appointed fulfilment centre. (iii) labelling requirements (in addition to any mandatory requirements under the applicable Laws); (iv) prohibitions and exclusions of certain types of products, such as prohibited and controlled categories listed in the Policies, illegal or prohibited, hazardous, toxic or radioactive products, or products which require special storage or handling. LEI (or LEI’s 3PL) may reject or re-package (at your expense) any Products for the provision of FBL Services, and return such Products. B. All FBL Products shall correspond strictly with the details of the Inbound Order. Seller shall further provide any other additional information required by LEI to accompany every shipment of FBL Products, such as list of barcodes for each item, warranty details, expiry date for each item, as well as gross and net weight. X. XXX may reject any shipment of FBL Products which is not accompanied by a valid and corresponding Inbound Order, as well as any other additional information which the Seller is required to provide. D. In the event that FBL Products shipped to LEI’s appointed fulfilment center do not comply with the Inbound Order or the requirements applicable to FBL Products, or are not accompanied by the additional information required by LEI, LEI may refuse such shipment of FBL Products. LEI will notify the Seller of such refusal in writing within ten (10) Working Days. Upon receipt of said written notice, Seller shall retrieve at Seller’s expense such rejected shipment within the following timelines: (i) within one (1) day, if LEI reasonably determines that the FBL Products create a safety, health or liability risk to LEI, its personnel or sub-contractors; (ii) within two (2) Working Days, if the FBL Products do not comply with the requirements relating to minimum expiry dates or periods; (iii) within seven (7) Working Days, if the refusal is due to any other reason. E. If Seller fails to retrieve any rejected FBL Products within the timelines above, the rejected FBL Products will be deemed abandoned and LEI may dispose of the FBL Products in any manner it deems appropriate. Title to abandoned refused FBL Products will transfer to LEI at no cost to LEI for the purpose of such disposal, and LEI will retain all proceeds, if any, received from the disposal of any abandoned refused FBL Products. If the proceeds of the disposal are insufficient to cover the costs of such disposal, LEI shall be entitled to recover such uncovered costs from the Seller. F. Alternatively, LEI may elect to return the rejected shipment to the Seller, or accept the FBL Product for inbounding subject to re-packaging or re-labelling of any FBL Products which do not comply with the packaging or labelling requirements, and may recover all incurred expenses from the Seller. X. XXX’x acceptance of the FBL Products at the appointed fulfilment centre does not: (i) indicate or imply that any FBL Products have been delivered in accordance with LEI’s inbound requirements set out above and are free of loss or damage; or (ii) indicate or imply that LEI actually received the number of units of FBL Products specified by Seller or in the Inbound Order for such shipment; or (iii) waive, limit or reduce any of LEI’s rights under the LSA or these FBL Terms. X. XXX may, at its sole discretion, and without notice to the Seller, at any time open and inspect any shipment or batch of FBL Products delivered to and handed over to LEI at a relevant FBL Warehouse or FBL Products Handover Point (as applicable).

Requirements for FBL Products. A. FBL Products shall comply with LEIXxxxxx’s requirements as notified on the BMS Portal, Seller Center or Lazada University. For purposes of this LSAFBL Terms, BMS Portal means the FBL Business Management System which allows the user to manage their inventory, available at BMS Portal. These requirements include (but are not limited to): (i) minimum expiry dates or periods; (ii) packaging requirements to ensure the integrity of the FBL Products delivered to LEIXxxxxx’s appointed fulfilment centre. (iii) labelling requirements (in addition to any mandatory requirements under the applicable Lawslaw); (iv) prohibitions and exclusions of certain types of products, such as prohibited and controlled categories listed in the Policies, illegal or prohibited, hazardous, toxic or radioactive products, or products which require special storage or handling. LEI Lazada (or LEILazada’s 3PL) may reject or re-package (at your expense) any Products for the provision of FBL Services, and return such Products. B. All FBL Products shall correspond strictly with the details of the Inbound Order. Seller shall further provide any other additional information required by LEI Xxxxxx to accompany every shipment of FBL Products, such as list of barcodes for each item, warranty details, expiry date for each item, as well as gross and net weight. X. XXX Xxxxxx may reject any shipment of FBL Products which is not accompanied by a valid and corresponding Inbound Order, as well as any other additional information which the Seller is required to provide. D. In the event that FBL Products shipped to LEIXxxxxx’s appointed fulfilment center centre do not comply with the Inbound Order or the requirements applicable to FBL Products, or are not accompanied by the additional information required by LEIXxxxxx, LEI Lazada may refuse such shipment of FBL Products. LEI Lazada will notify the Seller of such refusal in writing within ten (10) Working Days. Upon receipt of said written notice, Seller shall retrieve at Seller’s expense such rejected shipment within the following timelines: (i) within one (1) day, if LEI Lazada reasonably determines that the FBL Products create a safety, health or liability risk to LEILazada, its personnel or sub-contractors; (ii) within two (2) Working Days, if the FBL Products do not comply with the requirements relating to minimum expiry dates or periods; (iii) within seven (7) Working Days, if the refusal is due to any other reason. E. If Seller fails to retrieve any rejected FBL Products within the timelines above, the rejected FBL Products will be deemed abandoned and LEI Lazada may dispose of the FBL Products in any manner it deems appropriate. Title to abandoned refused FBL Products will transfer to LEI Lazada at no cost to LEI Lazada for the purpose of such disposal, and LEI Xxxxxx will retain all proceeds, if any, received from the disposal of any abandoned refused FBL Products. If the proceeds of the disposal are insufficient to cover the costs of such disposal, LEI Lazada shall be entitled to recover such uncovered costs from the Seller. F. Alternatively, LEI Lazada may elect to return the rejected shipment to the Seller, or accept the FBL Product for inbounding subject to re-packaging or re-labelling of any FBL Products which do not comply with the packaging or labelling requirements, and may recover all incurred expenses from the Seller. X. XXX’x Xxxxxx’x acceptance of the FBL Products at the appointed fulfilment centre does not: (i) indicate or imply that any FBL Products have been delivered in accordance with LEILazada’s inbound requirements set out above and are free of loss or damage; or (ii) indicate or imply that LEI Xxxxxx actually received the number of units of FBL Products specified by Seller or in the Inbound Order for such shipment; or (iii) waive, limit or reduce any of LEILazada’s rights under the LSA Terms or these FBL Terms. X. XXX may, at its sole discretion, and without notice to the Seller, at any time open and inspect any shipment or batch of FBL Products delivered to and handed over to LEI at a relevant FBL Warehouse or FBL Products Handover Point (as applicable).

Requirements for FBL Products. A. FBL Products shall comply with LEIXxxxxx’s requirements as notified on the BMS Portal, Seller Center or Lazada University. For purposes of this LSAFBL Terms, BMS Portal means the FBL Business Management System which allows the user to manage their inventory, available at BMS Portal[ xxxxx://xxx.xxxxxx.xxx/ ]. These requirements include (but are not limited to): (i) minimum expiry dates or periods; (ii) packaging requirements to ensure the integrity of the FBL Products delivered to LEIXxxxxx’s appointed fulfilment centre. (iii) labelling requirements (in addition to any mandatory requirements under the applicable Lawslaw); (iv) prohibitions and exclusions of certain types of products, such as prohibited and controlled categories listed in the Policies, illegal or prohibited, hazardous, toxic or radioactive products, or products which require special storage or handling. LEI Lazada (or LEILazada’s 3PL) may reject or re-package (at your expense) any Products for the provision of FBL Services, and return such Products. B. All FBL Products shall correspond strictly with the details of the Inbound Order. Seller shall further provide any other additional information required by LEI Xxxxxx to accompany every shipment of FBL Products, such as list of barcodes for each item, warranty details, expiry date for each item, as well as gross and net weight. X. XXX Xxxxxx may reject any shipment of FBL Products which is not accompanied by a valid and corresponding Inbound Order, as well as any other additional information which the Seller is required to provide. D. In the event that FBL Products shipped to LEIXxxxxx’s appointed fulfilment center centre do not comply with the Inbound Order or the requirements applicable to FBL Products, or are not accompanied by the additional information required by LEIXxxxxx, LEI Xxxxxx may refuse such shipment of FBL Products. LEI Lazada will notify the Seller of such refusal in writing within ten (10) Working Days. Upon receipt of said written notice, Seller shall retrieve at Seller’s expense such rejected shipment within the following timelines: (i) within one (1) day, if LEI Lazada reasonably determines that the FBL Products create a safety, health or liability risk to LEILazada, its personnel or sub-contractors; (ii) within two (2) Working Days, if the FBL Products do not comply with the requirements relating to minimum expiry dates or periods; (iii) within seven (7) Working Days, if the refusal is due to any other reason. E. If Seller fails to retrieve any rejected FBL Products within the timelines above, the rejected FBL Products will be deemed abandoned and LEI Lazada may dispose of the FBL Products in any manner it deems appropriate. Title to abandoned refused FBL Products will transfer to LEI Lazada at no cost to LEI Lazada for the purpose of such disposal, and LEI Xxxxxx will retain all proceeds, if any, received from the disposal of any abandoned refused FBL Products. If the proceeds of the disposal are insufficient to cover the costs of such disposal, LEI Lazada shall be entitled to recover such uncovered costs from the Seller. F. Alternatively, LEI Lazada may elect to return the rejected shipment to the Seller, or accept the FBL Product for inbounding subject to re-packaging or re-labelling of any FBL Products which do not comply with the packaging or labelling requirements, and may recover all incurred expenses from the Seller. X. XXX’x Xxxxxx’x acceptance of the FBL Products at the appointed fulfilment centre does not: (i) indicate or imply that any FBL Products have been delivered in accordance with LEILazada’s inbound requirements set out above and are free of loss or damage; or (ii) indicate or imply that LEI Xxxxxx actually received the number of units of FBL Products specified by Seller or in the Inbound Order for such shipment; or (iii) waive, limit or reduce any of LEILazada’s rights under the LSA Terms or these FBL Terms. X. XXX may, at its sole discretion, and without notice to the Seller, at any time open and inspect any shipment or batch of FBL Products delivered to and handed over to LEI at a relevant FBL Warehouse or FBL Products Handover Point (as applicable).

Requirements for FBL Products. A. FBL Products shall comply with LEILazada’s requirements as notified on the BMS Portal, Seller Center or Lazada University. For purposes of this LSAFBL Terms, BMS Portal means the FBL Business Management System which allows the user to manage their inventory, available at BMS Portal. These requirements include (but are not limited to): (i) minimum expiry dates or periods; (ii) packaging requirements to ensure the integrity of the FBL Products delivered to LEIXxxxxx’s appointed fulfilment centre.; (iii) labelling requirements (in addition to any mandatory requirements under the applicable Lawslaw);; and (iv) prohibitions and exclusions of certain types of products, such as prohibited and controlled categories listed in the Policies, illegal or prohibited, hazardous, toxic or radioactive products, or products which require special storage or handling. LEI Lazada (or LEILazada’s 3PL) may reject or re-package (at your expense) any Products for the provision of FBL Services, and return such Products. B. All FBL Products shall correspond strictly with the details of the Inbound Order. Seller shall further provide any other additional information required by LEI Xxxxxx to accompany every shipment of FBL Products, such as list of barcodes for each item, warranty details, expiry date for each item, as well as gross and net weight. X. XXX C. Lazada may reject any shipment of FBL Products which is not accompanied by a valid and corresponding Inbound Order, as well as any other additional information which the Seller is required to provide. D. In the event that FBL Products shipped to LEILazada’s appointed fulfilment center centre do not comply with the Inbound Order or the requirements applicable to FBL Products, or are not accompanied by the additional information required by LEIXxxxxx, LEI Lazada may refuse such shipment of FBL Products. LEI Lazada will notify the Seller of such refusal in writing within ten (10) Working Days. Upon receipt of said written notice, Seller shall retrieve at Seller’s expense such rejected shipment within the following timelines: (i) within one (1) day, if LEI Lazada reasonably determines that the FBL Products create a safety, health or liability risk to LEILazada, its personnel or sub-contractors; (ii) within two (2) Working Days, if the FBL Products do not comply with the requirements relating to minimum expiry dates or periods; (iii) within seven (7) Working Days, if the refusal is due to any other reason. E. If Seller fails to retrieve any rejected FBL Products within the timelines above, the rejected FBL Products will be deemed abandoned and LEI Lazada may dispose of the FBL Products in any manner it deems appropriate. Title to abandoned refused FBL Products will transfer to LEI Lazada at no cost to LEI Lazada for the purpose of such disposal, and LEI Xxxxxx will retain all proceeds, if any, received from the disposal of any abandoned refused FBL Products. If the proceeds of the disposal are insufficient to cover the costs of such disposal, LEI Lazada shall be entitled to recover such uncovered costs from the Seller. F. Alternatively, LEI Xxxxxx may elect to return the rejected shipment to the Seller, or accept the FBL Product for inbounding subject to re-packaging or re-labelling of any FBL Products which do not comply with the packaging or labelling requirements, and may recover all incurred expenses from the Seller. X. XXX’x Xxxxxx’x acceptance of the FBL Products at the appointed fulfilment centre does not: (i) indicate or imply that any FBL Products have been delivered in accordance with LEILazada’s inbound requirements set out above and are free of loss or damage; or (ii) indicate or imply that LEI Xxxxxx actually received the number of units of FBL Products specified by Seller or in the Inbound Order for such shipment; or (iii) waive, limit or reduce any of LEILazada’s rights under the LSA Terms or these FBL Terms. X. XXX may, at its sole discretion, and without notice to the Seller, at any time open and inspect any shipment or batch of FBL Products delivered to and handed over to LEI at a relevant FBL Warehouse or FBL Products Handover Point (as applicable).