Common use of Return to Table of Contents Clause in Contracts

Return to Table of Contents. DIVISION 09 FINISHES • CONTRACTOR to paint basketball court layout on concrete and asphalt play areas at elementary and intermediate schools. Coordinate with the basket goals as follows: - Court lines and half-court lines, 3" wide, white - All others, including 3-point line, free throw line and lane, 2" wide minimum, white • Kitchen floors to be quarry tile; use dark epoxy grout only. • For Kitchen floors use the following tile and grout (or approved equivalent): - Metropolitan – Quarry tile: Color No. 507 – Puritan Grey - Dal-Tile – Quarry tile: Color No. 000 – Grey - Laticrete – Color No. 22 Walnut: Sanded • Use epoxy grout for all applications. There is no need to seal epoxy grout. • All grout lines shall be as narrow as possible. • Carpeting: - XXXXXXX & XXXXXX – Applause III or approved equivalent - Roll goods only; no tiles • Walk Off Mats: - XXXXXXX & XXXXXX – Abrasive Action; Charcoal color - Roll goods only; no tiles • Paint SUB-CONTRACTOR or CONTRACTOR shall provide supplemental work lighting at areas being painted. Workers must be able to see clearly in the opinion of the OWNER. • Color of first finish coat of paint shall be a different shade of color to facilitate inspection of the work. • Paint Standards: All Xxxxxxx Xxxxxxxx products: Painter’s Interior Caulk Interior Caulk No. 950A Type A Finish – Exterior and Exterior Hollow Metal Kem Kromik Universal Metal Primer B50 Series Industrial Enamel B54 Series Type B Finish – Interior CMU Block PrepRite Block Filler B25W25 ProClassic WaterBorne Interior Acrylic Semi-Gloss B31 Series Type B Finish – Interior Gypsum Board PrepRite 200 Interior Latex Wall Primer ProClassic WaterBorne Interior Acrylic Semi-Gloss B31 Series

Return to Table of Contents. DIVISION 09 FINISHES 06 Wood, Plastics and Composites • CONTRACTOR to paint basketball court layout on concrete and asphalt play areas at elementary and intermediate schools. Coordinate with the basket goals as followsCabinet Hardware: - Court lines and half-court linesHinges; Institutional Hinge, 3" wide100742, white - All othersDull Chrome (Cabinetmakers Hardware, including 3-point line2002, free throw line and laneVolume 6B), 2" wide minimum, white • Kitchen floors to be quarry tile; use dark epoxy grout only. • For Kitchen floors use the following tile and grout (or approved equivalent): - Metropolitan – Quarry tile: Color No. 507 – Puritan Grey - Dal-Tile – Quarry tile: Color No(Hinge count, spacing and layout to be determined as required) • Drawer slides to be full extension with 100 lb. 000 – Grey - Laticrete – Color Norating. 22 Walnut: Sanded • Use epoxy grout for a standard casework good quality lock and key on all applications. There is no need to seal epoxy groutmillwork (will not match classroom door key). • All grout lines casework doors and drawers to be keyed. • Key all cabinets in each room alike. System must be keyed to a master for all cabinets in each facility. • All casework must have full wood base of either 3/4" plywood or 2"x 4" frame. (Particleboard, wafer board or legs are not acceptable). This requirement is to be verified on LEED or TX-CHPS projects. • Under-counter computer keyboard trays shall be as narrow as possible. • Carpeting: - XXXXXXX & XXXXXX – Applause III or approved equivalent - Roll goods only; no tiles • Walk Off Mats: - XXXXXXX & XXXXXX – Abrasive Action; Charcoal color - Roll goods only; no tiles • Paint custom built by the casework SUB-CONTRACTOR to the following specifications: ­ Manufacture from 7/8” thick cabinet grade plywood (no particle board) ­ Tray to be 10” deep x 30” wide, minimum. ­ Trays to be sanded smooth, without sharp corners and covered with laminate on the ends, top and front. Laminate shall match the base cabinet. ­ Slides shall be Accuride Model 2109-16 or CONTRACTOR shall provide supplemental work lighting at areas being paintedapproved equivalent. Workers must ­ xxxx://xxx.xxxxxxxxxxxx.xxx/m/accuride/drawer-slides-full-and-partial-extension/AC210916/ RETURN TO TABLE OF CONTENTS DIVISION 07 Thermal & Moisture Protection • All roof hatches to be able to see clearly aluminum material. Include a roof hatch in the opinion of the all projects, including single story buildings and additions, unless specifically requested otherwise by OWNER. • Color of first finish coat of paint Default color for roof flashing is dark bronze unless otherwise specified by the ARCHITECT. • Through-wall flashing and receivers to be constructed with 24 gauge stainless steel. Waterproof membrane shall be a different shade of color to facilitate inspection of the workself-adhered modified membrane (ice and water shield or approved equivalent). • Paint Standards: All Xxxxxxx Xxxxxxxx products: Painter’s Interior Caulk Interior Caulk Nothermal and moisture protection standards must be reviewed by the District Roofing Consultant prior to releasing for proposal requests. 950A Type A Finish – Exterior CONTRACTOR shall facilitate a thermal and Exterior Hollow Metal Kem Kromik Universal Metal Primer B50 Series Industrial Enamel B54 Series Type B Finish – Interior CMU Block PrepRite Block Filler B25W25 ProClassic WaterBorne Interior Acrylic Semimoisture protection pre-Gloss B31 Series Type B Finish – Interior Gypsum Board PrepRite 200 Interior Latex Wall Primer ProClassic WaterBorne Interior Acrylic Semi-Gloss B31 Seriesinstallation meeting that shall include the District Roofing Consultant.

Return to Table of Contents. DIVISION 09 FINISHES 06 WOOD, PLASTICS AND COMPOSITES • CONTRACTOR to paint basketball court layout on concrete and asphalt play areas at elementary and intermediate schools. Coordinate with the basket goals as followsCabinet Hardware: - Court lines and half-court linesHinges; Institutional Hinge, 3" wide100742, white - All othersDull Chrome (Cabinetmakers Hardware, including 3-point line2002, free throw line and laneVolume 6B), 2" wide minimum, white • Kitchen floors to be quarry tile; use dark epoxy grout only. • For Kitchen floors use the following tile and grout (or approved equivalent): - Metropolitan – Quarry tile: Color No. 507 – Puritan Grey - Dal-Tile – Quarry tile: Color No(Hinge count, spacing and layout to be determined as required) • Drawer slides to be full extension with 100 lb. 000 – Grey - Laticrete – Color Norating. 22 Walnut: Sanded • Use epoxy grout a standard casework good quality lock and key on all millwork (will not match classroom door key). • Key all cabinets in each room alike. System must be keyed to a master for all applications. There is no need to seal epoxy groutcabinets in each facility. • All grout lines casework must have full wood base of either 3/4" plywood or 2"x 4" frame. (Particleboard, wafer board or legs are not acceptable). This requirement is to be verified on LEED or TX-CHPS projects. • Under-counter computer keyboard trays shall be as narrow as possiblecustom built by the casework SUB-CONTRACTOR to the following specifications: - Manufacture from 7/8” thick cabinet grade plywood (no particle board) - Tray to be 10” deep x 30” wide, minimum. - Trays to be sanded smooth, without sharp corners and covered with laminate on the ends, top and front. Laminate shall match the base cabinet. - Slides shall be Accuride Model 2109-16 or approved equivalent. - xxxx://xxx.xxxxxxxxxxxx.xxx/m/accuride/drawer-slides-full-and-partial-extension/AC210916/ RETURN TO TABLE OF CONTENTS DIVISION 07 THERMAL & MOISTURE PROTECTION • All roof hatches to be aluminum material. Include a roof hatch in all projects, including single story buildings and additions, unless specifically requested otherwise by OWNER. • Carpeting: - XXXXXXX & XXXXXX – Applause III Default color for roof flashing is dark bronze unless otherwise specified by the ARCHITECT. • On all Requests for Competitive Sealed Proposals add a two-ply modified bitumen membrane roofing system such as Firestone, Performance, Siplast or approved equivalent - Roll goods only; no tiles as an alternate. • Walk Off Mats: - XXXXXXX & XXXXXX – Abrasive Action; Charcoal color - Roll goods only; no tiles Through-wall flashing and receivers to be constructed with 24 gauge stainless steel. Waterproof membrane shall be self-adhered modified membrane (ice and water shield or approved equivalent). • Paint SUB-CONTRACTOR or All thermal and moisture protection standards must be reviewed by the District Roofing Consultant prior to releasing for proposal requests. CONTRACTOR shall provide supplemental work lighting at areas being painted. Workers must be able to see clearly in facilitate a thermal and moisture protection pre-installation meeting that shall include the opinion of the OWNER. • Color of first finish coat of paint shall be a different shade of color to facilitate inspection of the work. • Paint Standards: All Xxxxxxx Xxxxxxxx products: Painter’s Interior Caulk Interior Caulk No. 950A Type A Finish – Exterior and Exterior Hollow Metal Kem Kromik Universal Metal Primer B50 Series Industrial Enamel B54 Series Type B Finish – Interior CMU Block PrepRite Block Filler B25W25 ProClassic WaterBorne Interior Acrylic Semi-Gloss B31 Series Type B Finish – Interior Gypsum Board PrepRite 200 Interior Latex Wall Primer ProClassic WaterBorne Interior Acrylic Semi-Gloss B31 SeriesDistrict Roofing Consultant.