RIGHTS AND PREFERENCES OF SUB-TRUSTS. Unless otherwise specified by the Trustees, the Sub-Trusts established above and all future Sub-Trusts or any classes thereof have the following rights and preferences:
RIGHTS AND PREFERENCES OF SUB-TRUSTS Sample Clauses
Related to RIGHTS AND PREFERENCES OF SUB-TRUSTS
Relative Rights and Preferences Unless the establishing resolution or any other resolution adopted pursuant to Section 2.3 otherwise provides, Shares of each Portfolio or Class thereof established hereunder shall have the following relative rights and preferences: (a) Except as set forth in paragraph (e) of this Section 2.5, each Share of a Portfolio, regardless of Class, shall represent an equal pro rata interest in the assets belonging to such Portfolio and shall have identical voting, dividend, liquidation and other rights, preferences, powers, restrictions, limitations, qualifications and designations and terms and conditions with each other Share of such Portfolio. (b) Shareholders shall have no preemptive or other right to subscribe to any additional Shares or other securities issued by the Trust or the Trustees, whether of the same or other Portfolio (or Class). (c) All consideration received by the Trust for the issue or sale of Shares of a particular Portfolio, together with all assets in which such consideration is invested or reinvested, all income, earnings, profits, and proceeds thereof, including any proceeds derived from the sale, exchange, or liquidation of such assets, and any funds or payments derived from any reinvestment of such proceeds in whatever form the same may be, shall be held and accounted for separately from the other assets of the Trust and of every other Portfolio and may be referred to herein as "assets belonging to" that Portfolio. The assets belonging to a particular Portfolio shall belong to that Portfolio for all purposes, and to no other Portfolio, subject only to the rights of creditors of that Portfolio. In addition, any assets, income, earnings, profits or funds, or payments and proceeds with respect thereto, which are not readily identifiable as belonging to any particular Portfolio shall be allocated by the Trustees between and among one or more of the Portfolios in such manner as the Trustees, in their sole discretion, deem fair and equitable. Each such allocation shall be conclusive and binding upon the Shareholders of all Portfolios thereof for all purposes, and such assets, income, earnings, profits, or funds, or payments and proceeds with respect thereto shall be assets belonging to that Portfolio. (d) Each Class of a Portfolio shall have a proportionate undivided interest (as determined by or at the direction of, or pursuant to authority granted by, the Trustees, consistent with industry practice) ("Proportionate Interest") in the net assets belonging to that Portfolio. References herein to assets, expenses, charges, costs, and reserves "allocable" or "allocated" to a particular Class of a Portfolio shall mean the aggregate amount of such item(s) of the Portfolio multiplied by the Class's Proportionate Interest. (e) A particular Portfolio shall be charged with the liabilities of that Portfolio, and all expenses, costs, charges and reserves attributable to any particular Portfolio shall be borne by such Portfolio; provided that the Trustees may, in their sole discretion, allocate or authorize the allocation of particular expenses, costs, charges, and/or reserves of a Portfolio to fewer than all the Classes thereof. Class Expenses shall, in all cases, be allocated to the Class for which such Class Expenses were incurred. Any general liabilities, expenses, costs, charges or reserves of the Trust (or any Portfolio) that are not readily identifiable as chargeable to or bearable by any particular Portfolio (or any particular Class) shall be allocated and charged by the Trustees between or among any one or more of the Portfolios (or Classes) in such manner as the Trustees in their sole discretion deem fair and equitable. Each such allocation shall be conclusive and binding upon the Shareholders of all Portfolios (or Classes) for all purposes. Without limitation of the foregoing provisions of this Section 2.5(e), (i) the debts, liabilities, obligations and expenses incurred, contracted for or otherwise existing with respect to a particular Portfolio shall be enforceable against the assets of such Portfolio only, and not against the assets of the Trust generally or assets belonging to any other Portfolio, and (ii) none of the debts, liabilities, obligations and expenses incurred, contracted for or otherwise existing with respect to the Trust generally that have not been allocated to a specified Portfolio, or with respect to any other Portfolio, shall be enforceable against the assets of such specified Portfolio. Notice of this contractual limitation on inter-Portfolio liabilities is set forth in the Trust's Certificate of Trust described in Section 1.4, and, accordingly, the statutory provisions of Section 3804 of the Delaware Act relating to limitations on inter-Portfolio liabilities (and the statutory effect under Section 3804 of setting forth such notice in the Certificate of Trust) are applicable to the Trust and each Portfolio. (f) Except as provided for in Section 2.10, shares redeemed or repurchased by a Portfolio or the Trust shall be deemed to be canceled. (g) The Trust may issue Shares in fractional denominations of 1/1000th of a Share or integral multiples thereof to the same extent as its whole Shares, and Shares in fractional denominations shall be Shares having proportionately to the respective fractions represented thereby all the rights of whole Shares of the same Portfolio (or Class), including without limitation, the right to vote, the right to receive dividends and distributions and the right to participate upon termination of the Trust or any Portfolio, but excluding the right to receive a certificate representing fractional Shares. All references to Shares in this Agreement shall be deemed to be shares of any or all Portfolios, or Classes thereof, as the context may require. All provisions herein relating to the Trust shall apply equally to each Portfolio of the Trust, and each Class thereof, except as the context otherwise requires.
Issuances of Additional Partnership Interests (a) The Partnership may issue additional Partnership Interests and options, rights, warrants, appreciation rights, tracking and phantom interests, and other economic interests relating to the Partnership Interests (including pursuant to Section 7.4(c)) for any partnership purpose at any time and from time to time to such Persons for such consideration and on such terms and conditions as the General Partner shall determine, all without the approval of any Limited Partners. (b) Each additional Partnership Interest or other security authorized to be issued by the Partnership pursuant to Section 5.6(a) or Section 7.4(c) may be issued in one or more classes, or one or more series of any such classes, with such designations, preferences, rights, powers and duties (which may be senior to existing classes and series of Partnership Interests or other securities), as shall be fixed by the General Partner, including (i) the right to share in Partnership profits and losses or items thereof; (ii) the right to share in Partnership distributions; (iii) the rights upon dissolution and liquidation of the Partnership; (iv) whether, and the terms and conditions upon which, the Partnership may or shall be required to redeem the Partnership Interest (including sinking fund provisions) or other security; (v) whether such Partnership Interest or other security is issued with the privilege of conversion or exchange and, if so, the terms and conditions of such conversion or exchange; (vi) the terms and conditions upon which each Partnership Interest or other security will be issued, evidenced by certificates and assigned or transferred; (vii) the method for determining the Percentage Interest as to such Partnership Interest; and (viii) the right, if any, of each such Partnership Interest to vote on Partnership matters, including matters relating to the relative rights, preferences and privileges of such Partnership Interest. (c) The General Partner shall take all actions that it determines to be necessary or appropriate in connection with (i) each issuance of Partnership Interests and options, rights, warrants, appreciation rights, tracking and phantom interests, and other economic interests in the Partnership or relating to Partnership Interests pursuant to this Section 5.6 or Section 7.4(c), (ii) the conversion of the Combined Interest into Units pursuant to the terms of this Agreement, (iii) the issuance of Common Units pursuant to Section 5.11, (iv) the admission of Additional Limited Partners and (v) all additional issuances of Partnership Interests. The General Partner shall determine the relative rights, powers and duties of the holders of the Units or other Partnership Interests or other securities being so issued. The General Partner shall do all things necessary to comply with the Delaware Act and is authorized and directed to do all things that it determines to be necessary or appropriate in connection with any future issuance of Partnership Interests or other securities or in connection with the conversion of the Combined Interest into Units pursuant to the terms of this Agreement, including compliance with any statute, rule, regulation or guideline of any federal, state or other governmental agency or any National Securities Exchange on which the Units or other Partnership Interests are listed or admitted to trading. (d) No fractional Units shall be issued by the Partnership.
Organization and Ownership of Shares of Subsidiaries (a) Schedule 5.4 contains (except as noted therein) complete and correct lists of the Company’s Restricted and Unrestricted Subsidiaries as of the Execution Date, showing, as to each Subsidiary, the correct name thereof, the jurisdiction of its organization and, with respect to each Material Subsidiary, the percentage of shares of each class of its Capital Stock outstanding owned by the Company and each other Subsidiary. (b) All of the outstanding shares of Capital Stock of each Subsidiary owned by the Company and its Subsidiaries have been validly issued, are fully paid and nonassessable and are owned by the Company or another Subsidiary free and clear of any Lien (except as otherwise disclosed in Schedule 5.4). (c) Each Subsidiary is a corporation or other legal entity duly organized, validly existing and in good standing under the laws of its jurisdiction of organization, and is duly qualified as a foreign corporation or other legal entity and is in good standing in each jurisdiction in which such qualification is required by law, other than those jurisdictions as to which the failure to be so qualified or in good standing could not, individually or in the aggregate, reasonably be expected to have a Material Adverse Effect. Each such Subsidiary has the corporate or other power and authority to own or hold under lease the properties it purports to own or hold under lease and to transact the business it transacts and proposes to transact. (d) No Subsidiary is a party to, or otherwise subject to, any legal, regulatory, contractual or other restriction (other than this Agreement, the agreements listed on Schedule 5.4 and customary limitations imposed by corporate law or similar statutes) restricting its ability to make Restricted Payments to the Company or any of its Subsidiaries that owns outstanding shares of Capital Stock of such Subsidiary, except for such restrictions that do not impair the Company’s ability to perform its obligations under this Agreement, including, without limitation, its obligation to make payments hereunder and under the Notes.
200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, glass, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
Other Provisions Relating to Rights of Holders of Warrants 7.1 No Rights as Stockholder. A Warrant does not entitle the Registered Holder thereof to any of the rights of a stockholder of the Company, including, without limitation, the right to receive dividends, or other distributions, exercise any preemptive rights to vote or to consent or to receive notice as stockholders in respect of the meetings of stockholders or the election of directors of the Company or any other matter.
DOMESTIC PREFERENCES FOR PROCUREMENTS To the extent applicable, Supplier certifies that during the term of this Contract will comply with applicable requirements of 2 C.F.R. § 200.322.
OTHER PROVISIONS RELATING TO RIGHTS OF HOLDERS OF WARRANT CERTIFICATES 3.1 No Rights as Warrant Securityholder Conferred by Warrants or Warrant Certificates. No Warrant Certificate or Warrant evidenced thereby shall entitle the holder thereof to any of the rights of a holder of Warrant Securities, including, without limitation, the right to receive the payment of dividends or distributions, if any, on the Warrant Securities or to exercise any voting rights, except to the extent expressly set forth in this Agreement or the applicable Warrant Certificate.
Rights of Assignees of Partnership Interests (a) Subject to the provisions of Sections 9.1 and 9.2 hereof, except as required by operation of law, the Partnership shall not be obligated for any purposes whatsoever to recognize the assignment by any Limited Partner of its Partnership Interest until the Partnership has received notice thereof. (b) Any Person who is the assignee of all or any portion of a Limited Partner’s Limited Partnership Interest, but does not become a Substitute Limited Partner and desires to make a further assignment of such Limited Partnership Interest, shall be subject to all the provisions of this Article 9 to the same extent and in the same manner as any Limited Partner desiring to make an assignment of its Limited Partnership Interest.
CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
