Common use of Risk and Liability Clause in Contracts

Risk and Liability. 16.1 When receiving the Products at the Take Over Point, the Contractor shall ensure that any and all damage or discrepancies observed are noted and notify ArcelorMittal immediately, but not later than within 6 (six) hours of the Contractor becoming aware of any such damages or discrepancies. The Contractor undertakes not to handle any damaged Products until ArcelorMittal has inspected such damaged Products. ArcelorMittal shall carry out such inspection when it deems it to be necessary. 16.2 The Contractor shall be liable for loss or damage to the Products, whilst the Products are in custody and control of the Contractor. The Products will be considered to be in the Contractor’s custody and under its control from the time of receipt at the Take Over Point until delivered to the Destination. 16.3 Notwithstanding any instruction that maybe given by ArcelorMittal, the Contractor shall be liable for any loss or damage to the Products resulting from defects or damage or other factors caused by handling methods or equipment of the Contractor or Contractor Employees. 16.4 The Contractor shall be responsible for any delays or damages whatsoever incurred due to the inability of the Contractor or Contractor Employees to perform in terms of this Agreement. 16.5 ArcelorMittal shall not be liable for, or in respect of, or in consequence of, any accident or damage caused to any property belonging to the Contractor or Contractor Employees and the Contractor indemnifies ArcelorMittal against all such damages and compensation against all claims, demands, proceedings, costs, charges and expenses, whatsoever, in respect thereof or in relation thereto. The Contractor is obliged to inform the Contractor Employees of the foregoing as any such claim shall be referred to the Contractor in terms of this clause. 16.6 ArcelorMittal reserves the right to subject all vehicles and personnel of the Contractor or Contractor Employees to a security check whilst entering or leaving the property of ArcelorMittal which security check may, with due observance of all statutory provisions, include a vehicle search, body search, and breathalyser test of any employee of the Contractor or Contractor Employees.

Risk and Liability. 16.1 When receiving the Products at from the Take Over PointSuppliers, the Contractor shall ensure that any and all damage or discrepancies observed are noted and notify ArcelorMittal immediately, but not later than within 6 (six) hours of the Contractor becoming aware of any such damages or discrepancies. The Contractor undertakes not to handle any damaged Products until ArcelorMittal has inspected such damaged Products. ArcelorMittal shall carry out such inspection when it deems it to be necessarywithout delay. 16.2 The Contractor shall be liable for loss or damage to the Products, whilst the Products are in custody and control of the Contractor. The Products will be considered to be in the Contractor’s custody and under its control from the time of receipt at from the Take Over Point Suppliers until delivered to the DestinationWorks. 16.3 Notwithstanding any instruction that maybe given by ArcelorMittal, the Contractor shall be liable for any loss or damage to the Products resulting from defects or damage or other factors caused by handling methods or equipment of the Contractor or Contractor Employees. 16.4 The Contractor shall be responsible for any delays or damages whatsoever incurred due to the inability of the Contractor or Contractor Employees to perform in terms of this Agreement. 16.5 ArcelorMittal shall not be liable for, or in respect of, or in consequence of, any accident or damage caused to any property belonging to the Contractor or Contractor Employees and the Contractor indemnifies ArcelorMittal against all such damages and compensation against all claims, demands, proceedings, costs, charges and expenses, whatsoever, in respect thereof or in relation thereto. The Contractor is obliged to inform the Contractor Employees of the foregoing as any such claim shall be referred to the Contractor in terms of this clause. 16.6 ArcelorMittal reserves the right to subject all vehicles and personnel of the Contractor or Contractor Employees to a security check whilst entering or leaving the property of ArcelorMittal which security check may, with due observance of all statutory provisions, include a vehicle search, body search, and breathalyser test search of any employee of the Contractor or Contractor Employees.

Risk and Liability. 16.1 When receiving the Products at the Take Over Point, the Contractor shall ensure that any and all damage or discrepancies observed are noted and notify ArcelorMittal immediately, but not later than within 6 (six) hours of the Contractor becoming aware of any such damages or discrepancies. The Contractor undertakes not to handle any damaged Products until ArcelorMittal has inspected such damaged Products. ArcelorMittal shall carry out such inspection when it deems it to be necessarywithout delay. 16.2 The Contractor shall be liable for loss or damage to the Products, whilst the Products are in custody and control of the Contractor. The Products will be considered to be in the Contractor’s custody and under its control from the time of receipt at the Take Over Point until delivered to the Destination. 16.3 Notwithstanding any instruction that maybe given by ArcelorMittal, the Contractor shall be liable for any loss or damage to the Products resulting from defects or damage or other factors caused by handling methods or equipment of the Contractor or Contractor Employees. 16.4 The Contractor shall be responsible for any delays or damages whatsoever incurred due to the inability of the Contractor or Contractor Employees to perform in terms of this Agreement. 16.5 ArcelorMittal shall not be liable for, or in respect of, or in consequence of, any accident or damage caused to any property belonging to the Contractor or Contractor Employees and the Contractor indemnifies ArcelorMittal against all such damages and compensation against all claims, demands, proceedings, costs, charges and expenses, whatsoever, in respect thereof or in relation thereto. The Contractor is obliged to inform the Contractor Employees of the foregoing as any such claim shall be referred to the Contractor in terms of this clause. 16.6 ArcelorMittal reserves the right to subject all vehicles and personnel of the Contractor or Contractor Employees to a security check whilst entering or leaving the property of ArcelorMittal which security check may, with due observance of all statutory provisions, include a vehicle search, body search, and breathalyser test search of any employee of the Contractor or Contractor Employees.

Risk and Liability. 16.1 When receiving the Products at the Take Over Point, the Contractor shall ensure that any and all damage or discrepancies observed are noted and notify ArcelorMittal immediately, but not later than within 6 (six) hours of the Contractor becoming aware of any such damages or discrepancies. The Contractor undertakes not to handle any damaged Products until ArcelorMittal has inspected such damaged Products. ArcelorMittal shall carry out such inspection when it deems it to be necessary. 16.2 The Contractor shall be liable for loss or damage to the Products, whilst the Products are in custody and control of the Contractor. The Products will be considered to be in the Contractor’s custody and under its control from the time of receipt at the Take Over Point until delivered to the Destination. 16.3 16.2 Notwithstanding any instruction that maybe given by ArcelorMittal, the Contractor shall be liable for any loss or damage to the Products resulting from defects or damage or other factors caused by handling methods or equipment of the Contractor or Contractor Employees. 16.4 16.3 The Contractor shall be responsible for any delays or damages whatsoever incurred due to the inability of the Contractor or Contractor Employees to perform in terms of this Agreement. 16.5 16.4 ArcelorMittal shall not be liable for, or in respect of, or in consequence of, any accident or damage caused to any property belonging to the Contractor or Contractor Employees and the Contractor indemnifies ArcelorMittal against all such damages and compensation against all claims, demands, proceedings, costs, charges and expenses, whatsoever, in respect thereof or in relation thereto. The Contractor is obliged to inform the Contractor Employees of the foregoing as any such claim shall be referred to the Contractor in terms of this clause. 16.6 16.5 ArcelorMittal reserves the right to subject all vehicles and personnel of the Contractor or Contractor Employees to a security check whilst entering or leaving the property of ArcelorMittal which security check may, with due observance of all statutory provisions, include a vehicle search, body search, and breathalyser test search of any employee of the Contractor or Contractor Employees.

Risk and Liability. 16.1 When receiving the Products Product at the Take Over Point, the Contractor shall ensure that any and all damage or discrepancies observed are noted and notify ArcelorMittal immediately, but not later than within 6 (six) hours of the Contractor becoming aware of any such damages or discrepancies. The Contractor undertakes not to handle any damaged Products until ArcelorMittal has inspected such damaged Products. ArcelorMittal shall carry out such inspection when it deems it to be necessary. 16.2 The Contractor shall be liable for loss or damage to the Products, whilst the Products are in custody and control of the Contractor. The Products will be considered to be in the Contractor’s custody and under its control from the time of receipt at the Take Over Point until delivered to the DestinationWorks. 16.3 Notwithstanding any instruction that maybe given by ArcelorMittal, the Contractor shall be liable for any loss or damage to the Products resulting from defects or damage or other factors caused by handling methods or equipment of the Contractor or Contractor Employees. 16.4 The Contractor shall be responsible for any delays or damages whatsoever incurred due to the inability of the Contractor or Contractor Employees to perform in terms of this Agreement. 16.5 ArcelorMittal shall not be liable for, or in respect of, or in consequence of, any accident or damage caused to any property belonging to the Contractor or Contractor Employees and the Contractor indemnifies ArcelorMittal against all such damages and compensation against all claims, demands, proceedings, costs, charges and expenses, whatsoever, in respect thereof or in relation thereto. The Contractor is obliged to inform the Contractor Employees of the foregoing as any such claim shall be referred to the Contractor in terms of this clause. 16.6 ArcelorMittal reserves the right to subject all vehicles and personnel of the Contractor or Contractor Employees to a security check whilst entering or leaving the property of ArcelorMittal which security check may, with due observance of all statutory provisions, include a vehicle search, body search, and breathalyser test of any employee of the Contractor or Contractor Employees.

Risk and Liability. 16.1 When receiving the Products at the Take Over Point, the Contractor shall ensure that any and all damage or discrepancies observed are noted and notify ArcelorMittal immediately, but not later than within 6 (six) hours of the Contractor becoming aware of any such damages or discrepancies. The Contractor undertakes not to handle any damaged Products until ArcelorMittal has inspected such damaged Products. ArcelorMittal shall carry out such inspection when it deems it to be necessary. 16.2 The Contractor shall be liable for loss or damage to the Products, whilst the Products are in custody and control of the Contractor. The Products will be considered to be in the Contractor’s custody and under its control from the time of receipt at the Take Over Takeover Point until delivered to the Destination. 16.3 16.2 Notwithstanding any instruction that maybe given by ArcelorMittal, the Contractor shall be liable for any loss or damage to the Products resulting from defects or damage or other factors caused by handling methods or equipment of the Contractor or Contractor Employees. 16.4 16.3 The Contractor shall be responsible for any delays or damages whatsoever incurred due to the inability of the Contractor or Contractor Employees to perform in terms of this Agreement. 16.5 16.4 ArcelorMittal shall not be liable for, or in respect of, or in consequence of, any accident or damage caused to any property belonging to the Contractor or Contractor Employees and the Contractor indemnifies ArcelorMittal against all such damages and compensation against all claims, demands, proceedings, costs, charges and expenses, whatsoever, in respect thereof or in relation thereto. The Contractor is obliged to inform the Contractor Employees of the foregoing as any such claim shall be referred to the Contractor in terms of this clause. 16.6 16.5 ArcelorMittal reserves the right to subject all vehicles and personnel of the Contractor or Contractor Employees to a security check whilst entering or leaving the property of ArcelorMittal which security check may, with due observance of all statutory provisions, include a vehicle search, body search, and breathalyser test search of any employee of the Contractor or Contractor Employees.

Risk and Liability. 16.1 When receiving the Products at from the Take Over PointSuppliers, the Contractor shall ensure that any and all damage or discrepancies observed are noted and notify ArcelorMittal immediately, but not later than within 6 (six) hours of the Contractor becoming aware of any such damages or discrepancies. The Contractor undertakes not to handle any damaged Products until ArcelorMittal has inspected such damaged Products. ArcelorMittal shall carry out such inspection when it deems it to be necessary. . 16.2 The Contractor shall be liable for loss or damage to the Products, whilst the Products are in custody and control of the Contractor. The Products will be considered to be in the Contractor’s custody and under its control from the time of receipt at from the Take Over Point Suppliers until delivered to the DestinationWorks. 16.3 Notwithstanding any instruction that maybe given by ArcelorMittal, the Contractor shall be liable for any loss or damage to the Products resulting from defects or damage or other factors caused by handling methods or equipment of the Contractor or Contractor Employees. 16.4 The Contractor shall be responsible for any delays or damages whatsoever incurred due to the inability of the Contractor or Contractor Contractor’s Employees to perform in terms of this Agreement. 16.5 ArcelorMittal shall not be liable for, or in respect of, or in consequence of, any accident or damage caused to any property belonging to the Contractor or Contractor Employees and the Contractor indemnifies ArcelorMittal against all such damages and compensation against all claims, demands, proceedings, costs, charges and expenses, whatsoever, in respect thereof or in relation thereto. The Contractor is obliged to inform the Contractor Employees of the foregoing as any such claim shall be referred to the Contractor in terms of this clause. 16.6 ArcelorMittal reserves the right to subject all vehicles and personnel of the Contractor or Contractor Employees to a security check whilst entering or leaving the property of ArcelorMittal which security check may, with due observance of all statutory provisions, include a vehicle search, body search, and breathalyser test of any employee of the Contractor or Contractor Employees.

Risk and Liability. 16.1 When receiving the Products at from the Take Over PointSuppliers, the Contractor shall ensure that any and all damage or discrepancies observed are noted and notify ArcelorMittal immediately, but not later than within 6 (six) hours of the Contractor becoming aware of any such damages or discrepancies. The Contractor undertakes not to handle any damaged Products until ArcelorMittal has inspected such damaged Products. ArcelorMittal shall carry out such inspection when it deems it to be necessary. 16.2 The Contractor shall be liable for loss or damage to the Products, whilst the Products are in custody and control of the Contractor. The Products will be considered to be in the Contractor’s custody and under its control from the time of receipt at from the Take Over Point Suppliers until delivered to the DestinationWorks. 16.3 Notwithstanding any instruction that maybe given by ArcelorMittal, the Contractor shall be liable for any loss or damage to the Products resulting from defects or damage or other factors caused by handling methods or equipment of the Contractor or Contractor Employees. 16.4 The Contractor shall be responsible for any delays or damages whatsoever incurred due to the inability of the Contractor or Contractor Contractor’s Employees to perform in terms of this Agreement. 16.5 ArcelorMittal shall not be liable for, or in respect of, or in consequence of, any accident or damage caused to any property belonging to the Contractor or Contractor Employees and the Contractor indemnifies ArcelorMittal against all such damages and compensation against all claims, demands, proceedings, costs, charges and expenses, whatsoever, in respect thereof or in relation thereto. The Contractor is obliged to inform the Contractor Employees of the foregoing as any such claim shall be referred to the Contractor in terms of this clause. 16.6 ArcelorMittal reserves the right to subject all vehicles and personnel of the Contractor or Contractor Employees to a security check whilst entering or leaving the property of ArcelorMittal which security check may, with due observance of all statutory provisions, include a vehicle search, body search, and breathalyser test of any employee of the Contractor or Contractor Employees.