Common use of Sale Name Clause in Contracts

Sale Name. Sybel Fuels Reduction Reoffer Contract No: A4 - Timber Payment Rates, applicable to B3.1 and B4.0 A4a - For Species and Products to be Paid for at Rates Escalated under B3.2 Not Applicable A4b - For Species and Products to be Paid for at Flat Rates Species Product Unit of Measure Rates per Unit of Measure Base $ Advertised $ Bid Premium $ Bid (Flat) $ Required Deposits Slash Disposal $ Lodgepole Pine and other Coniferous Species Sawtimber Ton .00 1.49 .47 Ponderosa Pine Sawtimber Ton .00 1.49 .47 Timber Subject to Agreement under C2.11# Softwood Other Grn Bio Cv & Saw Ton For purposes of convenience in collection and bookkeeping, Bid Rates stated in A4 include payment of deposits for sale area betterment required pursuant to 16 USC 576b. Such deposits are not included as Required Deposits defined hereunder. Sale Name: Sybel Fuels Reduction Reoffer Contract No: The following definitions are established for the terms used in A4: Base Rates are the lowest rates of payment for timber that are authorized by this contract. Base Rates remain constant throughout the life of this contract and are not subject to change by rate redetermination, except for reduction under B3.31, B3.32, or B3.33. Advertised Rates are the minimum acceptable Bid Rates for timber, exclusive of Required Deposits. These rates are those indicated by appraisal, with a cost allowance made for construction of Specified Roads listed in A7, but are never less than Base Rates. Bid Premium Rates are the amounts by which Purchaser's bid is in excess of Advertised Rates. The Bid Premium Rates are constant during this contract, except as provided in B3.31, B3.32, and B3.33. Bid Rates are the rates bid by Purchaser (exclusive of Required Deposits for slash disposal, road maintenance, and contract scaling) and are the sum of Advertised Rates and Bid Premium Rates. Until a rate redetermination becomes effective, the Bid Rate for species and products in A4a is the Tentative Rate that is subject to quarterly adjustment under B3.2; for species and products in A4b, the Bid Rate is the Flat Rate. Required Deposits are deposits that Purchaser may be required to pay for slash disposal (16 USC 490), road maintenance (16 USC 537), and contract scaling (1994 Appropriations Act). Required Deposits may be adjusted as part of a rate redetermination or a Contract Term Extension. The table shows only Required Deposits for slash disposal; road maintenance deposits, if any, are given in C5.32#; and contract scaling deposits, if any, are given in C6.816#. Base Index is the specified average of the lumber or other product selling value index used as the basis for computing adjustment in rates for variance in product selling value, as provided in B3.2. A5 - Indices Used in Quarterly Adjustment, applicable to B3.2 Not Applicable A6 - High Stumps, applicable to B6.412 Species Product Maximum Xxxxx Height * (inches) All Sawtimber 12 * * 12 inches or 1/3 the xxxxx diameter, whichever is greater, minimum xxxxx height of 6 inches.

Sale Name. Sybel Fuels Reduction Reoffer Xxxx Contract No: A4 - Timber Payment Rates, applicable to B3.1 and B4.0 A4a - For Species and Products to be Paid for at Rates Escalated under B3.2 Not Applicable Rates per Unit of Measure Required Deposits Species Product Unit of Measure Base $ Advertised $ Bid Premium $ Bid (Tentative) $ Slash Disposal $ Base Index Live & Dead ES Conifer Sawtimber CCF 5.00 7.82 2.41 234.06 Live TF and Other Conifer Sawtimber CCF 3.00 3.90 2.41 211.76 A4b - For Species and Products to be Paid for at Flat Rates Species Product Unit of Measure Rates per Unit of Measure Base $ Advertised $ Bid Premium $ Bid (Flat) $ Required Deposits Slash Disposal $ Lodgepole Pine and other Coniferous Species Sawtimber Ton .00 1.49 .47 Ponderosa Pine Sawtimber Ton .00 1.49 .47 Timber Subject to Agreement under C2.11# Softwood Other Grn Bio Cv & Saw Ton Not Applicable For purposes of convenience in collection and bookkeeping, Bid Rates stated in A4 include payment of deposits for sale area betterment required pursuant to 16 USC 576b. Such deposits are not included as Required Deposits defined hereunder. Sale Name: Sybel Fuels Reduction Reoffer Xxxx Contract No: The following definitions are established for the terms used in A4: Base Rates are the lowest rates of payment for timber that are authorized by this contract. Base Rates remain constant throughout the life of this contract and are not subject to change by rate redetermination, except for reduction under B3.31, B3.32, or B3.33. Advertised Rates are the minimum acceptable Bid Rates for timber, exclusive of Required Deposits. These rates are those indicated by appraisal, with a cost allowance made for construction of Specified Roads listed in A7, but are never less than Base Rates. Bid Premium Rates are the amounts by which Purchaser's bid is in excess of Advertised Rates. The Bid Premium Rates are constant during this contract, except as provided in B3.31, B3.32, and B3.33. Bid Rates are the rates bid by Purchaser (exclusive of Required Deposits for slash disposal, road maintenance, and contract scaling) and are the sum of Advertised Rates and Bid Premium Rates. Until a rate redetermination becomes effective, the Bid Rate for species and products in A4a is the Tentative Rate that is subject to quarterly adjustment under B3.2; for species and products in A4b, the Bid Rate is the Flat Rate. Required Deposits are deposits that Purchaser may be required to pay for slash disposal (16 USC 490), road maintenance (16 USC 537), and contract scaling (1994 Appropriations Act). Required Deposits may be adjusted as part of a rate redetermination or a Contract Term Extension. The table shows only Required Deposits for slash disposal; road maintenance deposits, if any, are given in C5.32#; and contract scaling deposits, if any, are given in C6.816#. Base Index is the specified average of the lumber or other product selling value index used as the basis for computing adjustment in rates for variance in product selling value, as provided in B3.2. A5 - Indices Used in Quarterly Adjustment, applicable to B3.2 Not Applicable Species Index Name and Date Live & Dead ES Conifer WWPA, Inland White Xxxxx (17-18 Basis), (WWPAC) Live TF and Other Conifer WWPA, Inland White Xxxxx (17-18 Basis), (WWPAB) A6 - High Stumps, applicable to B6.412 Species Product Maximum Xxxxx Height * (inches) All Sawtimber 12 * * 12 inches or 1/3 the xxxxx diameter, whichever is greater, minimum xxxxx height of 6 inches.All 12

Sale Name. Sybel Fuels Reduction Reoffer Fifteen Mile Contract No: A4 - Timber Payment Rates, applicable to B3.1 and B4.0 A4a - For Species and Products to be Paid for at Rates Escalated under B3.2 Not Applicable A4b - For Species and Products to be Paid for at Flat Rates Species Product Rates per Unit of Measure Rates per Required Species Product Unit of Measure Base $ Advertised $ Bid Premium $ Bid (Flat) $ Required Deposits Slash Disposal $ Lodgepole Pine and other Coniferous Species Sawtimber Ton .00 1.49 .47 Ponderosa Pine Sawtimber Ton .00 1.49 .47 Timber Subject to Agreement under C2.11# Softwood Other Grn Bio Cv & Saw Ton .93 .93 .51 For purposes of convenience in collection and bookkeeping, Bid Rates stated in A4 include payment of deposits for sale area betterment required pursuant to 16 USC 576b. Such deposits are not included as Required Deposits defined hereunder. Sale Name: Sybel Fuels Reduction Reoffer Fifteen Mile Contract No: The following definitions are established for the terms used in A4: Base Rates are the lowest rates of payment for timber that are authorized by this contract. Base Rates remain constant throughout the life of this contract and are not subject to change by rate redetermination, except for reduction under B3.31, B3.32, or B3.33. Advertised Rates are the minimum acceptable Bid Rates for timber, exclusive of Required Deposits. These rates are those indicated by appraisal, with a cost allowance made for construction of Specified Roads listed in A7, but are never less than Base Rates. Bid Premium Rates are the amounts by which Purchaser's bid is in excess of Advertised Rates. The Bid Premium Rates are constant during this contract, except as provided in B3.31, B3.32, and B3.33. Bid Rates are the rates bid by Purchaser (exclusive of Required Deposits for slash disposal, road maintenance, and contract scaling) and are the sum of Advertised Rates and Bid Premium Rates. Until a rate redetermination becomes effective, the Bid Rate for species and products in A4a is the Tentative Rate that is subject to quarterly adjustment under B3.2; for species and products in A4b, the Bid Rate is the Flat Rate. Required Deposits are deposits that Purchaser may be required to pay for slash disposal (16 USC 490), road maintenance (16 USC 537), and contract scaling (1994 Appropriations Act). Required Deposits may be adjusted as part of a rate redetermination or a Contract Term Extension. The table shows only Required Deposits for slash disposal; road maintenance deposits, if any, are given in C5.32#; and contract scaling deposits, if any, are given in C6.816#. Base Index is the specified average of the lumber or other product selling value index used as the basis for computing adjustment in rates for variance in product selling value, as provided in B3.2. A5 - Indices Used in Quarterly Adjustment, applicable to B3.2 Not Applicable A6 - High Stumps, applicable to B6.412 Species Product Maximum Xxxxx Height * (inches) All Sawtimber 12 * * 12 inches or 1/3 the xxxxx diameter, whichever is greater, minimum xxxxx height of 6 inches.All 12

Sale Name. Sybel Fuels Reduction Reoffer Volcano Fire Salvage Contract No: A4 - Timber Payment Rates, applicable to B3.1 and B4.0 A4a - For Species and Products to be Paid for at Rates Escalated under B3.2 Not Applicable SAMPLE A4b - For Species and Products to be Paid for at Flat Rates Species Product Rates per Unit of Measure Rates per Required Species Product Unit of Measure Base $ Advertised $ Bid Premium $ Bid (Flat) $ Required Deposits Slash Disposal $ Lodgepole Pine and other Coniferous Species Xxxxxxx Fir Sawtimber Ton MBF .50 .50 .00 1.49 .47 Incense Cedar Sawtimber MBF .50 .50 .00 Ponderosa Pine Sawtimber Ton MBF .50 .50 .00 1.49 .47 Sugar Pine Sawtimber MBF .50 .50 .00 White Fir Sawtimber MBF .50 .50 .00 Timber Subject to Agreement under C2.11# Combined Softwood Other Grn Bio Cv & Non-Saw Ton MBF .50 .50 Combined Softwood Cull Logs MBF .50 .50 For purposes of convenience in collection and bookkeeping, Bid Rates stated in A4 include payment of deposits for sale area betterment required pursuant to 16 USC 576b. Such deposits are not included as Required Deposits defined hereunder. Sale Name: Sybel Fuels Reduction Reoffer Volcano Fire Salvage Contract No: The following definitions are established for the terms used in A4: Base Rates are the lowest rates of payment for timber that are authorized by this contract. Base Rates remain constant throughout the life of this contract and are not subject to change by rate redetermination, except for reduction under B3.31, B3.32, or B3.33. Advertised Rates are the minimum acceptable Bid Rates for timber, exclusive of Required Deposits. These rates are those indicated by appraisal, with a cost allowance made for construction of Specified Roads listed in A7, but are never less than Base Rates. SAMPLE Bid Premium Rates are the amounts by which Purchaser's bid is in excess of Advertised Rates. The Bid Premium Rates are constant during this contract, except as provided in B3.31, B3.32, and B3.33. Bid Rates are the rates bid by Purchaser (exclusive of Required Deposits for slash disposal, road maintenance, and contract scaling) and are the sum of Advertised Rates and Bid Premium Rates. Until a rate redetermination becomes effective, the Bid Rate for species and products in A4a is the Tentative Rate that is subject to quarterly adjustment under B3.2; for species and products in A4b, the Bid Rate is the Flat Rate. Required Deposits are deposits that Purchaser may be required to pay for slash disposal (16 USC 490), road maintenance (16 USC 537), and contract scaling (1994 Appropriations Act). Required Deposits may be adjusted as part of a rate redetermination or a Contract Term Extension. The table shows only Required Deposits for slash disposal; road maintenance deposits, if any, are given in C5.32#; and contract scaling deposits, if any, are given in C6.816#. Base Index is the specified average of the lumber or other product selling value index used as the basis for computing adjustment in rates for variance in product selling value, as provided in B3.2. A5 - Indices Used in Quarterly Adjustment, applicable to B3.2 Not Applicable A6 - High Stumps, applicable to B6.412 Species Product Maximum Xxxxx Height * (inches) All Sawtimber 12 * * 12 inches Sale Name: Volcano Fire Salvage Contract No: A7 - Specified Roads, applicable to B5.2 Name and Date of Governing Road Specifications: Project Design Class Approx. Length (mi./km.) Sheet Numbers and Approval Date Performance Responsibility Road No. Name Survey Design Construction Staking 1/ NOT APPLICABLE SAMPLE 1/ Indicate timing, i.e., before clearing (BC) or 1/3 after clearing (AC). Applicable to B5.212. A8 - Forest Service Engineering Completion Schedule, applicable to B5.21 Road No. Road Name Type of Work Completion Date NOT APPLICABLE Sale Name: Volcano Fire Salvage Contract No: A9 - Scaling Instructions and Specifications, applicable to B6.8 Name and Date of Governing Instructions: National Forest Log Scaling Handbook, FSH 2409.11, as amended. Scaling Specifications Species Product Maximum Scaling Length (feet) Trim Allowance Diameter Range (inches) Length Range (feet) Trim Allowance (inches) All All 20 ALL ALL 6 SAMPLE A10 - Scaling Services, applicable to B6.81 Species Product Unit of Measure Site and Geographic Location Method Standard Estimated Cost per Unit $ Sale Name: Volcano Fire Salvage Contract No: A11 - Minimum Scaling Volumes, applicable to B6.81 Minimum volume for Continuous Scaling Services in two-week period 0 MBF per scaler Minimum volume for Intermittent Scaling Services 0 MBF on a MONTH basis A12 - Fire Precautionary Period, applicable to B7.2 April 01 to December 01 , inclusive SAMPLE A13 - Purchaser Responsibility to Furnish Crews and Equipment for: Initial Fire Supression, applicable to B7.3 Within 25 road miles Fire Suppression Reinforcement, applicable to B7.312 and B 7.313 Within 100 road miles A14 - Purchaser's Obligation per Operations Fire, applicable to B7.41 Maximum Amount: $ $40,300.00 A15 - Termination Date, applicable to B8.2 August 15, 2022 A16 - Normal Operating Season, applicable to B6.31, B6.66, B8.21 and B9.3 First Period: June 01 to October 31 , inclusive Second Period: to , inclusive A17 - Performance Bond Amount, applicable to B9.1 A18 - Downpayment, applicable to B4.211 Downpayment Amount: A19 - Periodic Payment Amount, applicable to B4.213 Periodic Payment Determination Date Amount Initial Payment: N/A N/A Additional Payment: N/A N/A A20 - Market-Related Contract Term Addition Producer Price Index, applicable to B8.212 Index Name: Softwood Lumber Index Number: 0811 Sale Name: Volcano Fire Salvage Contract No: A21 - Inapplicable Standard Provisions The following listed Sections, Subsections, or Items of Division B-Standard Provisions - are hereby made inapplicable. (Instructions: List by reference number and title.) B4.211 B4.4 B8.212 B8.64 DOWNPAYMENT PAYMENTS NOT RECEIVED SAMPLE MARKET-RELATED CONTRACT TERM ADDITION DEBARMENT AND SUSPENSION CERTIFICATION A22 - List of Special Provisions The following listed special provisions are attached to and made a part of this contract as Division C. Provisions with reference numbers followed by # contain blanks into which data have been entered for this sale. (Instructions: List by reference number, title, and date.) C2.11# C2.2# C2.35# C2.353# C4.211 C4.212 C4.4 C5.12# C5.31# C5.35# C6.24# C6.315# C6.331 C6.37 C6.41# C6.42# C6.5 C6.6# C6.7# C6.815 C7.2# C7.22# C8.64 C8.66# (Option 1) TIMBER SUBJECT TO AGREEMENT (02/1971) MINIMUM PIECE SIZE FOR SAWTIMBER (02/2009) DESIGNATION OF TIMBER, CUTTING UNIT BOUNDARIES, AND SUBDIVISION/PAYMENT UNIT BOUNDARIES (06/2012) DESIGNATION BY DAMAGE CLASS (01/2021) DOWNPAYMENT (06/2007) TEMPORARY REDUCTION OF DOWNPAYMENT (08/2009) PAYMENTS NOT RECEIVED (08/2012) USE OF ROADS BY PURCHASER (06/1999) ROAD MAINTENANCE REQUIREMENTS (07/2001) ROAD AND WATER SUPPLY USE (05/2008) SITE SPECIFIC PROTECTION MEASURES (04/2004) SALE OPERATIONS SCHEDULE (08/2006) LOG TRUCKING (08/2006) SUBSTITUTE METHODS (08/2006) FELLING, BUCKING, AND LIMBING (08/2007) GROUND BASED SKIDDING (08/2006) STREAMCOURSE PROTECTION (08/2006) EROSION PREVENTION AND CONTROL (05/2008) SLASH TREATMENT (08/2006) THIRD PARTY SCALING SERVICES (04/2004) SPECIFIED FIRE PRECAUTIONS (06/2012) EMERGENCY PRECAUTIONS (06/2012) DEBARMENT AND SUSPENSION CERTIFICATION (03/2018) USE OF TIMBER (04/2004) Sale Name: Volcano Fire Salvage Contract No: SAMPLE This Page Intentionally Left Blank UNITED STATES DEPARTMENT OF AGRICULTURE Forest Service TIMBER SALE CONTRACT DIVISION B SAMPLE June 2006 (Date of Issue) STANDARD PROVISIONS FOR SCALED TIMBER SALES (Applicable to Timber Sales to be Scaled after Felling) This Division is organized into Parts, Sections, Sub- sections, and Items. These are numbered in accordance with the xxxxx diameterfollowing scheme: Part B1.0, whichever is greaterSection B1.1, minimum xxxxx height Sub- section B1.11, and Item B1.111. References to a Part in- clude all Sections, Subsections, and Items within that Part; references to a Section include all Subsections and Items within that Section; and references to a Subsection include all Items within that Subsection. Cross-references within this contract cite the reference number of 6 inchesthe appli- cable Division, Part, Section, Subsection, and Item. De- scriptive headings used are not to be considered in de- termining the rights and obligations of the parties. The Standard Provisions in this Division are subject to Specific Conditions of the contract stated in Division A. Wherever appropriate, Specific Conditions established in Division A are cited by reference number. The listing of Sections, Subsections, or Items of this Division in A21 has the effect of striking or deleting them from Division B. A22 lists Special Provisions that comprise Division C. Where appropriate, references to Special Provisions are made by citing the applicable reference numbers.

Sale Name. Sybel Fuels Reduction Reoffer Xxxxxxxx Deck 1 Contract No: A4 - Timber Payment Rates, applicable to B3.1 and B4.0 A4a - For Species and Products to be Paid for at Rates Escalated under B3.2 Not Applicable A4b - For Species and Products to be Paid for at Flat Rates Species Product Rates per Unit of Measure Rates per Required Species Product Unit of Measure Base $ Advertised $ Bid Premium $ Bid (Flat) $ Required Deposits Slash Disposal $ Lodgepole Pine White Fir and other Other Coniferous Species Sawtimber Ton .00 1.49 .47 Ponderosa Pine Sawtimber Ton 1.01 .00 1.49 .47 Timber Subject to Agreement under C2.11# Softwood Other Grn Bio Cv & Saw Ton For purposes of convenience in collection and bookkeeping, Bid Rates stated in A4 include payment of deposits for sale area betterment required pursuant to 16 USC 576b. Such deposits are not included as Required Deposits defined hereunder. Sale Name: Sybel Fuels Reduction Reoffer Xxxxxxxx Deck 1 Contract No: The following definitions are established for the terms used in A4: Base Rates are the lowest rates of payment for timber that are authorized by this contract. Base Rates remain constant throughout the life of this contract and are not subject to change by rate redetermination, except for reduction under B3.31, B3.32, or B3.33. Advertised Rates are the minimum acceptable Bid Rates for timber, exclusive of Required Deposits. These rates are those indicated by appraisal, with a cost allowance made for construction of Specified Roads listed in A7, but are never less than Base Rates. Bid Premium Rates are the amounts by which Purchaser's bid is in excess of Advertised Rates. The Bid Premium Rates are constant during this contract, except as provided in B3.31, B3.32, and B3.33. Bid Rates are the rates bid by Purchaser (exclusive of Required Deposits for slash disposal, road maintenance, and contract scaling) and are the sum of Advertised Rates and Bid Premium Rates. Until a rate redetermination becomes effective, the Bid Rate for species and products in A4a is the Tentative Rate that is subject to quarterly adjustment under B3.2; for species and products in A4b, the Bid Rate is the Flat Rate. Required Deposits are deposits that Purchaser may be required to pay for slash disposal (16 USC 490), road maintenance (16 USC 537), and contract scaling (1994 Appropriations Act). Required Deposits may be adjusted as part of a rate redetermination or a Contract Term Extension. The table shows only Required Deposits for slash disposal; road maintenance deposits, if any, are given in C5.32#; and contract scaling deposits, if any, are given in C6.816#. Base Index is the specified average of the lumber or other product selling value index used as the basis for computing adjustment in rates for variance in product selling value, as provided in B3.2. A5 - Indices Used in Quarterly Adjustment, applicable to B3.2 Not Applicable A6 - High Stumps, applicable to B6.412 Species Product Maximum Xxxxx Height * (inches) All Sawtimber All 12 * * 12 inches Sale Name: Xxxxxxxx Deck 1 Contract No: A7 - Specified Roads, applicable to B5.2 Name and Date of Governing Road Specifications: Project Design Class Approx. Length (mi./km.) Sheet Numbers and Approval Date Performance Responsibility Road No. Name Survey Design Construction Staking 1/ NOT APPLICABLE 1/ Indicate timing, i.e., before clearing (BC) or 1/3 after clearing (AC). Applicable to B5.212. A8 - Forest Service Engineering Completion Schedule, applicable to X0.00 Xxxx Xx. Xxxx Name Type of Work Completion Date NOT APPLICABLE Sale Name: Xxxxxxxx Deck 1 Contract No: A9 - Scaling Instructions and Specifications, applicable to B6.8 Name and Date of Governing Instructions: FSH 2409.11a, National Forest Cubic Log Scaling Handbook, as amended and supplemented. Fiber scaling rules apply to non-sawtimber products. Check scaling will be performed on individual scaling locations. Scaling Specifications Species Product Maximum Scaling Length (feet) Trim Allowance Diameter Range (inches) Length Range (feet) Trim Allowance (inches) All All 32 ALL ALL 6 A10 - Scaling Services, applicable to B6.81 Species Product Unit of Measure Site and Geographic Location Method Standard Estimated Cost per Unit $ Sale Name: Xxxxxxxx Deck 1 Contract No: A11 - Minimum Scaling Volumes, applicable to B6.81 Minimum volume for Continuous Scaling Services in two-week period N/A Ton per scaler Minimum volume for Intermittent Scaling Services N/A Ton on a N/A basis A12 - Fire Precautionary Period, applicable to B7.2 April 01 to October 31 , inclusive A13 - Purchaser Responsibility to Furnish Crews and Equipment for: Initial Fire Supression, applicable to B7.3 Within 5 road miles Fire Suppression Reinforcement, applicable to B7.312 and B 7.313 Within 100 road miles A14 - Purchaser's Obligation per Operations Fire, applicable to B7.41 Maximum Amount: $ $300,000.00 A15 - Termination Date, applicable to B8.2 December 21, 2023 A16 - Normal Operating Season, applicable to B6.31, B6.66, B8.21 and B9.3 First Period: June 01 to October 31 , inclusive Second Period: to , inclusive A17 - Performance Bond Amount, applicable to B9.1 A18 - Downpayment, applicable to B4.211 Downpayment Amount: A19 - Periodic Payment Amount, applicable to B4.213 Periodic Payment Determination Date Amount Initial Payment: Additional Payment: A20 - Market-Related Contract Term Addition Producer Price Index, applicable to B8.212 Index Name: Softwood Lumber Index Number: 0811 Sale Name: Xxxxxxxx Deck 1 Contract No: A21 - Inapplicable Standard Provisions The following listed Sections, Subsections, or Items of Division B-Standard Provisions - are hereby made inapplicable. (Instructions: List by reference number and title.) B3.34 B4.211 B4.213 B4.3 B4.31 B4.4 B6.341 B6.841 B8.212 B8.64 B9.1 B9.11 EMERGENCY RATE REDETERMINATION DOWNPAYMENT PERIODIC PAYMENT SCHEDULE PAYMENT GUARANTEED BY BOND OR DEPOSITED SECURITIES BLANKET BOND PAYMENTS NOT RECEIVED PREVENTION OF OIL SPILLS ROUTE OF HAUL MARKET-RELATED CONTRACT TERM ADDITION DEBARMENT AND SUSPENSION CERTIFICATION PERFORMANCE BOND BOND REDUCTION A22 - List of Special Provisions The following listed special provisions are attached to and made a part of this contract as Division C. Provisions with reference numbers followed by # contain blanks into which data have been entered for this sale. (Instructions: List by reference number, title, and date.) C3.34 C3.47# C4.211 C4.212 C4.213 C4.3 C4.31 C4.4 C6.341 C6.35 C6.405 C6.841 (Option 1) C6.842 (OPTION 1) C7.1 C7.2 C7.201 C7.22 C8.10 C8.212 C8.64 C8.66# (Option 1) C9.1 C9.11 EMERGENCY RATE REDETERMINATION (06/2022) ABNORMAL DELAY (09/2004) DOWNPAYMENT. (07/2022) TEMPORARY REDUCTION OF DOWNPAYMENT (08/2009) PERIODIC PAYMENT. (07/2022) PAYMENT GUARANTEED BY BOND (08/2021) BLANKET BOND (08/2021) PAYMENTS NOT RECEIVED (08/2012) PREVENTION OF OIL DISCHARGES. (07/2022) EQUIPMENT CLEANING (10/2021) ALTERNATE REMOVAL OF INCLUDED TIMBER (05/2005) ROUTE OF HAUL. (07/2022) USE OF PAINT BY PURCHASER (05/2005) PLANS (09/2004) SPECIFIC FIRE PRECAUTIONS (09/2002) BURNING BY PURCHASER (01/1993) EMERGENCY FIRE PRECAUTIONS (06/2018) DISCLAIMER OF EXPRESSED OR IMPLIED WARRANTY (09/2004) MARKET-RELATED CONTRACT TERM ADDITION (11/2008) DEBARMENT AND SUSPENSION CERTIFICATION (03/2018) USE OF TIMBER (04/2004) PERFORMANCE BOND (08/2021) BOND REDUCTION (08/2021) Sale Name: Xxxxxxxx Deck 1 Contract No: This Page Intentionally Left Blank UNITED STATES DEPARTMENT OF AGRICULTURE Forest Service TIMBER SALE CONTRACT DIVISION B June 2006 (Date of Issue) STANDARD PROVISIONS FOR SCALED TIMBER SALES (Applicable to Timber Sales to be Scaled after Felling) This Division is organized into Parts, Sections, Sub- sections, and Items. These are numbered in accordance with the xxxxx diameterfollowing scheme: Part B1.0, whichever is greaterSection B1.1, minimum xxxxx height Sub- section B1.11, and Item B1.111. References to a Part in- clude all Sections, Subsections, and Items within that Part; references to a Section include all Subsections and Items within that Section; and references to a Subsection include all Items within that Subsection. Cross-references within this contract cite the reference number of 6 inchesthe appli- cable Division, Part, Section, Subsection, and Item. De- scriptive headings used are not to be considered in de- termining the rights and obligations of the parties. The Standard Provisions in this Division are subject to Specific Conditions of the contract stated in Division A. Wherever appropriate, Specific Conditions established in Division A are cited by reference number. The listing of Sections, Subsections, or Items of this Division in A21 has the effect of striking or deleting them from Division B. A22 lists Special Provisions that comprise Division C. Where appropriate, references to Special Provisions are made by citing the applicable reference numbers.

Sale Name. Sybel Fuels Reduction Quail Reoffer Contract No: A4 - Timber Payment Rates, applicable to B3.1 and B4.0 A4a - For Species and Products to be Paid for at Rates Escalated under B3.2 Not Applicable A4b - For Species and Products to be Paid for at Flat Rates Species Product Unit of Measure Rates per Unit of Measure Base $ Advertised $ Bid Premium $ Bid (Flat) $ Required Deposits Slash Disposal $ Lodgepole Pine and other Coniferous Species Combined Softwood Sawtimber Ton .00 1.49 .47 Ponderosa Pine Sawtimber Ton .00 1.49 .47 .10 3.89 2.47 Timber Subject to Agreement under C2.11# Combined Softwood Other Grn Bio Cv & Saw Ton .10 .10 .00 * S A M P L E * For purposes of convenience in collection and bookkeeping, Bid Rates stated in A4 include payment of deposits for sale area betterment required pursuant to 16 USC 576b. Such deposits are not included as Required Deposits defined hereunder. Sale Name: Sybel Fuels Reduction Quail Reoffer Contract No: The following definitions are established for the terms used in A4: Base Rates are the lowest rates of payment for timber that are authorized by this contract. Base Rates remain constant throughout the life of this contract and are not subject to change by rate redetermination, except for reduction under B3.31, B3.32, or B3.33. Advertised Rates are the minimum acceptable Bid Rates for timber, exclusive of Required Deposits. These rates are those indicated by appraisal, with a cost allowance made for construction of Specified Roads listed in A7, but are never less than Base Rates. Bid Premium Rates are the amounts by which Purchaser's bid is in excess of Advertised Rates. The Bid Premium Rates are constant during this contract, except as provided in B3.31, B3.32, and B3.33. Bid Rates are the rates bid by Purchaser (exclusive of Required Deposits for slash disposal, road maintenance, and contract scaling) and are the sum of Advertised Rates and Bid Premium Rates. Until a rate redetermination becomes effective, the Bid Rate for species and products in A4a is the Tentative Rate that is subject to quarterly adjustment under B3.2; for species and products in A4b, the Bid Rate is the Flat Rate. Required Deposits are deposits that Purchaser may be required to pay for slash disposal (16 USC 490), road maintenance (16 USC 537), and contract scaling (1994 Appropriations Act). Required Deposits may be adjusted as part of a rate redetermination or a Contract Term Extension. The table shows only Required Deposits for slash disposal; road maintenance deposits, if any, are given in C5.32#; and contract scaling deposits, if any, are given in C6.816#. Base Index is the specified average of the lumber or other product selling value index used as the basis for computing adjustment in rates for variance in product selling value, as provided in B3.2. A5 - Indices Used in Quarterly Adjustment, applicable to B3.2 Not Applicable * S A M P L E * A6 - High Stumps, applicable to B6.412 Species Product Maximum Xxxxx Height * (inches) All Sawtimber 12 * * 12 inches or 1/3 the xxxxx diameter, whichever is greater, minimum Minimum 3 inch xxxxx height for all trees. Maximum 12 inch xxxxx height for handfelled trees. Sale Name: Quail Reoffer Contract No: A7 - Specified Roads, applicable to B5.2 Name and Date of Governing Road Specifications: FP-14 Federal Highway Administration Standard Specifications for Construction of Roads and Bridges on Federal Highway Projects, as amended and supplemented (English) Project Design Class Appro. Length (mi./km.) Sheet Numbers and Approval Date Performance Responsibility Survey Design Construction Staking 1/ Road No. Name 0000-000-00 XXXXXX VALLEY SPUR (R) (segment 0 to .02) Single Lane - 5 mph .02 / .03 4 07/19/2018 FS FS Purchaser BC 0000-000-00 XXXXXX VALLEY SPUR (R) (segment 0 to 1.01) Single Lane - 5 mph 1.01 / 1.63 5 07/19/2018 FS FS Purchaser BC 1/ Indicate timing, i.e., before clearing (BC) or after clearing (AC). Applicable to B5.212. A8 - Forest Service Engineering Completion Schedule, applicable to B5.21 Road No. Road Name Type of Work Completion Date 0000-000-00 XXXXXX VALLEY SPUR (R) (segment 0 to .02) Survey and Design 10/07/2020 0000-000-00 XXXXXX VALLEY SPUR (R) (segment 0 to 1.01) Survey and Design 10/07/2020 A9 - Scaling Instructions and Specifications, applicable to B6.8 * S A M P L E * Name and Date of Governing Instructions: National Forest Cubic Scaling Handbook, FSH 2409.11a. as amended. Cubic Taper 4 as authorized by Regional Forester, February 2001. Scaling Specifications Species Product Maximum Scaling Length (feet) Trim Allowance Diameter Range (inches) Length Range (feet) Trim Allowance (inches) Combined Softwood Sawtimber 20 ALL ALL 6 inchesSale Name: Quail Reoffer Contract No: A10 - Scaling Services, applicable to B6.81 Species Product Unit of Measure Site and Geographic Location Method Standard Estimated Cost per Unit $ Combined Softwood Sawtimber Ton Intersection of 21N06 Road and State Route 89 Total (100%) Weight Scale .00 A11 - Minimum Scaling Volumes, applicable to B6.81 Minimum volume for Continuous Scaling Services in two-week period N/A Ton per scaler Minimum volume for Intermittent Scaling Services N/A Ton on a N/A basis A12 - Fire Precautionary Period, applicable to B7.2 April 01 to December 31 , inclusive A13 - Purchaser Responsibility to Furnish Crews and Equipment for: Initial Fire Supression, applicable to B7.3 Within 25 road miles * S A M P L E * Fire Suppression Reinforcement, applicable to B7.312 and B 7.313 Within 100 road miles A14 - Purchaser's Obligation per Operations Fire, applicable to B7.41 Maximum Amount: $ $37,800.00 A15 - Termination Date, applicable to B8.2 December 31, 2024 A16 - Normal Operating Season, applicable to B6.31, B6.66, B8.21 and B9.3 First Period: June 01 to October 15 , inclusive Second Period: to , inclusive A17 - Performance Bond Amount, applicable to B9.1 A18 - Downpayment, applicable to B4.211 Downpayment Amount: A19 - Periodic Payment Amount, applicable to B4.213 Periodic Payment Determination Date Amount Initial Payment: Additional Payment: May 25, 2023 May 25, 2024 A20 - Market-Related Contract Term Addition Producer Price Index, applicable to B8.212 Index Name: Softwood Lumber Index Number: 0811 Sale Name: Quail Reoffer Contract No: A21 - Inapplicable Standard Provisions The following listed Sections, Subsections, or Items of Division B-Standard Provisions - are hereby made inapplicable. (Instructions: List by reference number and title.) B4.211 B4.4 B8.212 B8.64 DOWNPAYMENT PAYMENTS NOT RECEIVED MARKET-RELATED CONTRACT TERM ADDITION DEBARMENT AND SUSPENSION CERTIFICATION A22 - List of Special Provisions The following listed special provisions are attached to and made a part of this contract as Division C. Provisions with reference numbers followed by # contain blanks into which data have been entered for this sale. (Instructions: List by reference number, title, and date.) C2.11# C2.3# C2.35# * S A M P L E * C4.211 C4.212 C4.4 C5.12# C5.13# C5.213# C5.31# C5.32# C5.35# C6.24# C6.315# C6.32# C6.331 C6.37 C6.41# C6.42# C6.5 C6.6# C6.7# C6.815 C7.2# C7.22# C8.212 C8.64 C8.66# (Option 1) TIMBER SUBJECT TO AGREEMENT (02/1971) RESERVE TREES (04/2004) DESIGNATION OF TIMBER, CUTTING UNIT BOUNDARIES, AND SUBDIVISION/PAYMENT UNIT BOUNDARIES (06/2012) DOWNPAYMENT (06/2007) TEMPORARY REDUCTION OF DOWNPAYMENT (08/2009) PAYMENTS NOT RECEIVED (08/2012) USE OF ROADS BY PURCHASER (06/1999) ROAD COMPLETION DATE (04/2004) DEPOSIT FOR RECONSTRUCTION ENGINEERING SERVICES (04/2020) ROAD MAINTENANCE REQUIREMENTS (07/2001) ROAD MAINTENANCE DEPOSIT SCHEDULE (08/2012) ROAD AND WATER SUPPLY USE (05/2008) SITE SPECIFIC PROTECTION MEASURES (04/2004) SALE OPERATIONS SCHEDULE (08/2006) PROTECTION OF RESERVE TREES (04/2004) LOG TRUCKING (08/2006) SUBSTITUTE METHODS (08/2006) FELLING, BUCKING, AND LIMBING (08/2007) GROUND BASED SKIDDING (08/2006) STREAMCOURSE PROTECTION (08/2006) EROSION PREVENTION AND CONTROL (05/2008) SLASH TREATMENT (08/2006) THIRD PARTY SCALING SERVICES (04/2004) SPECIFIED FIRE PRECAUTIONS (06/2012) EMERGENCY PRECAUTIONS (06/2012) MARKET-RELATED CONTRACT TERM ADDITION (11/2008) DEBARMENT AND SUSPENSION CERTIFICATION (03/2018) USE OF TIMBER (04/2004) C2.11# - TIMBER SUBJECT TO AGREEMENT (02/1971)‌ In addition, there is within Sale Area an unestimated quantity of: Species Product Combined Softwood Grn Bio Cv that shall be Included Timber upon written agreement. C2.3# - RESERVE TREES (04/2004) Notwithstanding the designations for cutting under B2.31, B2.32, B2.33, or B2.34, live or dead Rust Resistant or Candidate Rust Resistant Sugar Pine reserve trees or groups of reserve trees within such cutting units or clearings shall be left uncut. Reserve trees are identified by RED PAINT BANDED AT DBH AND/OR SILVER TAGS and shall be protected in accordance with C6.32#. Units with reserve trees are shown on Sale Area Map. C2.35# - DESIGNATION OF TIMBER, CUTTING UNIT BOUNDARIES, AND SUBDIVISION/PAYMENT UNIT BOUNDARIES (06/2012) * S A M P L E * Trees are designated for cutting under B2.35 only if designated as shown in the Timber Designation table below. The boundaries of Subdivisions/Payment Units and Cutting Units are designated as shown in the Boundary Designation table below. Trees used for boundary designation are not to be cut. SPECIFICATIONS PURSUANT TO C2.35# - DESIGNATION OF TIMBER. CUTTING UNIT BOUNDARIES, AND SUBDIVISION/PAYMENT UNIT BOUNDARIES Sale Name: Quail Reoffer Page 142 Contract 2400-6,(6/06) SPECIFICATIONS PURSUANT TO C2.35# - DESIGNATION OF TIMBER. CUTTING UNIT BOUNDARIES, AND SUBDIVISION/PAYMENT UNIT BOUNDARIES * S A M P L E * Timber Designation Table Subdivision Tree Paint Color Designation or Specification ALL BLUE Hazard Tree. Notwithstanding B2.32 all dead and unstable live trees which are leaning towards a road or are otherwise hazardous to a road, and are sufficiently tall to reach Purchaser's landings or the roadbed of National Forest System roads within Sale Area, shall be felled by Purchaser when Marked in the specified paint color above and below xxxxx height by Forest Service in advance of felling any other timber in the vicinity. Pieces meeting Utilization Standards from such dead and unstable live trees shall be removed unless Purchaser is notified in writing that removal would cause unacceptable damage to areas requiring special protection such as residual timber, roads, administrative sites, streamside management zones, and areas identified on Sale Area Map or on the ground. Variable Thinning: 82, 82A, 97, 97A and 99A BLUE Individual Tree Mark. Individual trees (10.0 – 29.9 inches DBH) are designated for cutting only if Marked above and below xxxxx height with the specified paint color. Radial Thinning: 14, 36, 40, 42, 94, 96, and 96A BLUE Individual Tree Mark. Individual trees (10.0 – 29.9 inches DBH) are designated for cutting only if Marked above and below xxxxx height with the specified paint color. Variable Thinning: 6, 28, 45, 95, 95A, 95B, 95C, 95D, and 99 ORANGE Leave Tree Mark. All live and dead conifer trees (10.0 - 29.9 inches DBH) are designated for cutting unless Marked as leave trees. Leave trees are Marked above and below xxxxx height with the specified paint color. Sale Area Map indicates areas plainly identified on the ground where leave trees are Marked to be left uncut. Meadow Restoration: 5, 5A, 6A, 6B, 6C, and 6D ORANGE Leave Tree Mark. All live and dead conifer trees (10.0 - 29.9 inches DBH) are designated for cutting unless Marked as leave trees. Leave trees are Marked above and below xxxxx height with the specified paint color. Sale Area Map indicates areas plainly identified on the ground where leave trees are Marked to be left uncut. Group Selection: 6- 1, 14-1, 28-1 thru 28- 8, 36-1 thru 36-4, 40- 1, 42-1, 82-1, 82-2, 94-1 thru 94-4, 96-1, 96-2, 97-1 thru 97-3, 99-1, and 99A-1 ORANGE Leave Tree Mark. All live and dead conifer trees (10.0 – 29.9 inches DBH) are designated for cutting unless Marked as leave trees. Leave trees are Marked above and below xxxxx height with the specified paint color. Sale Area Map indicates areas plainly identified on the ground where leave trees are Marked to be left uncut. ALL WHITE Wildlife Trees. Notwithstanding the designation for cutting under B2.3l, B2.33, B2.34, or B2.35, trees which are identified by standard Forest Service metal wildlife tree sign or painted with the specified paint color on the uphill and downhill side, shall be left uncut. In event such trees are destroyed in Purchaser's Operations, Forest Service may designate alternate trees to be saved. ALL BLACK Marked Out Trees. When it is necessary to delete previously marked trees, a unique tree marking paint color will be Marked over or adjacent to the original mark but will not obscure the original marking. Trees Marked with the original marking paint color and the unique tree marking paint color are not Included Timber. SPECIFICATIONS PURSUANT TO C2.35# - DESIGNATION OF TIMBER. CUTTING UNIT BOUNDARIES, AND SUBDIVISION/PAYMENT UNIT BOUNDARIES CONTINUED * S A M P L E * Subdivision/Payment Unit and Cutting Unit Boundary Designation Table Subdivision/Payment Unit Boundary Paint Color Boundary Designation 5, 5A, 6, 6A, 6B, 6C, 6D, 14, 28, 36, 40, 42, 45, 82, 82A, 94, 95, 95A, 95B, 95C, 95D, 96, 96A, 97, 97A, 99, and 99A ORANGE - Subdivision boundaries, as shown on Sale Area Map, are designated at eye level with two ORANGE Dots facing into the unit and one ORANGE Dots on both sides of the tree indicating the direction of the boundary.and an ORANGE paint spot at ground level. - ORANGE boundary posters with sale name and Subdivisions are stapled to boundary trees and face outward at locations where the Subdivision boundary intersects or coincides with roads. 6-1, 14-1, 28-1 thru 28-8, 36-1 thru 36-4, 40-1, 42-1, 82-1, 82-2, 94-1 thru 94-4, 96-1, 96-2, 97-1 thru 97-3, 99-1, and 99A-1 ORANGE - Subdivision boundaries, as shown on Sale Area Map, are designated at eye level with two ORANGE Slashes facing into the unit and one ORANGE Slash on both sides of the tree indicating the direction of the boundary.and an ORANGE paint spot at ground level. - ORANGE boundary posters with sale name and Subdivisions are stapled to boundary trees and face outward at locations where the Subdivision boundary intersects or coincides with roads. C4.211 - DOWNPAYMENT (06/2007)

Sale Name. Sybel Fuels Reduction Reoffer Hunter Multi Product SBA Sale Contract No: A4 - Timber Payment Rates, applicable to B3.1 and B4.0 A4a - For Species and Products to be Paid for at Rates Escalated under B3.2 Not Applicable A4b - For Species and Products to be Paid for at Flat Rates Species Product Rates per Unit of Measure Rates per Required Species Product Unit of Measure Base $ Advertised $ Bid Premium $ Bid (Flat) $ Required Deposits Slash Disposal $ Lodgepole Pine and other Coniferous Species Combined Softwood Sawtimber Ton .00 1.49 .47 Ponderosa Pine Sawtimber Ton .00 1.49 .47 Timber Subject to Agreement under C2.11# .10 6.19 .09 Other Softwood Other Grn Bio Cv & Saw Ton .10 6.19 .09 For purposes of convenience in collection and bookkeeping, Bid Rates stated in A4 include payment of deposits for sale area betterment required pursuant to 16 USC 576b. Such deposits are not included as Required Deposits defined hereunder. Sale Name: Sybel Fuels Reduction Reoffer Hunter Multi Product SBA Sale Contract No: The following definitions are established for the terms used in A4: Base Rates are the lowest rates of payment for timber that are authorized by this contract. Base Rates remain constant throughout the life of this contract and are not subject to change by rate redetermination, except for reduction under B3.31, B3.32, or B3.33. Advertised Rates are the minimum acceptable Bid Rates for timber, exclusive of Required Deposits. These rates are those indicated by appraisal, with a cost allowance made for construction of Specified Roads listed in A7, but are never less than Base Rates. Bid Premium Rates are the amounts by which Purchaser's bid is in excess of Advertised Rates. The Bid Premium Rates are constant during this contract, except as provided in B3.31, B3.32, and B3.33. Bid Rates are the rates bid by Purchaser (exclusive of Required Deposits for slash disposal, road maintenance, and contract scaling) and are the sum of Advertised Rates and Bid Premium Rates. Until a rate redetermination becomes effective, the Bid Rate for species and products in A4a is the Tentative Rate that is subject to quarterly adjustment under B3.2; for species and products in A4b, the Bid Rate is the Flat Rate. Required Deposits are deposits that Purchaser may be required to pay for slash disposal (16 USC 490), road maintenance (16 USC 537), and contract scaling (1994 Appropriations Act). Required Deposits may be adjusted as part of a rate redetermination or a Contract Term Extension. The table shows only Required Deposits for slash disposal; road maintenance deposits, if any, are given in C5.32#; and contract scaling deposits, if any, are given in C6.816#. Base Index is the specified average of the lumber or other product selling value index used as the basis for computing adjustment in rates for variance in product selling value, as provided in B3.2. A5 - Indices Used in Quarterly Adjustment, applicable to B3.2 Not Applicable A6 - High Stumps, applicable to B6.412 Species Product Maximum Xxxxx Height * (inches) All Combined Softwood Sawtimber 12 * * 12 inches or 1/3 the xxxxx diameter, whichever is greater, minimum Maximum xxxxx height of 6 for mechanized harvesting is 2 inches.

Sale Name. Sybel Fuels Reduction Reoffer Bull Run Contract No: A4 - Timber Payment Rates, applicable to B3.1 and B4.0 A4a - For Species and Products to be Paid for at Rates Escalated under B3.2 Not Applicable A4b - For Species and Products to be Paid for at Flat Rates Species Product Unit of Measure Rates per Unit of Measure Base $ Advertised $ Bid Premium $ Bid (Flat) $ Required Deposits Slash Disposal $ Lodgepole Pine White Fir and other Coniferous Species coniferous species Sawtimber Ton .00 1.49 .47 Ponderosa Pine Sawtimber Ton .00 1.49 .47 .84 .92 .23 Timber Subject to Agreement under C2.11# Softwood Other Grn Bio Cv & Saw Ton .01 .01 .23 For purposes of convenience in collection and bookkeeping, Bid Rates stated in A4 include payment of deposits for sale area betterment required pursuant to 16 USC 576b. Such deposits are not included as Required Deposits defined hereunder. Sale Name: Sybel Fuels Reduction Reoffer Bull Run Contract No: The following definitions are established for the terms used in A4: Base Rates are the lowest rates of payment for timber that are authorized by this contract. Base Rates remain constant throughout the life of this contract and are not subject to change by rate redetermination, except for reduction under B3.31, B3.32, or B3.33. Advertised Rates are the minimum acceptable Bid Rates for timber, exclusive of Required Deposits. These rates are those indicated by appraisal, with a cost allowance made for construction of Specified Roads listed in A7, but are never less than Base Rates. Bid Premium Rates are the amounts by which Purchaser's bid is in excess of Advertised Rates. The Bid Premium Rates are constant during this contract, except as provided in B3.31, B3.32, and B3.33. Bid Rates are the rates bid by Purchaser (exclusive of Required Deposits for slash disposal, road maintenance, and contract scaling) and are the sum of Advertised Rates and Bid Premium Rates. Until a rate redetermination becomes effective, the Bid Rate for species and products in A4a is the Tentative Rate that is subject to quarterly adjustment under B3.2; for species and products in A4b, the Bid Rate is the Flat Rate. Required Deposits are deposits that Purchaser may be required to pay for slash disposal (16 USC 490), road maintenance (16 USC 537), and contract scaling (1994 Appropriations Act). Required Deposits may be adjusted as part of a rate redetermination or a Contract Term Extension. The table shows only Required Deposits for slash disposal; road maintenance deposits, if any, are given in C5.32#; and contract scaling deposits, if any, are given in C6.816#. Base Index is the specified average of the lumber or other product selling value index used as the basis for computing adjustment in rates for variance in product selling value, as provided in B3.2. A5 - Indices Used in Quarterly Adjustment, applicable to B3.2 Not Applicable A6 - High Stumps, applicable to B6.412 Species Product Maximum Xxxxx Height * (inches) All Sawtimber 12 * * 12 inches or 1/3 the xxxxx diameter, whichever is greater, minimum xxxxx height of 6 inches.All 12

Sale Name. Sybel Fuels Reduction Reoffer Xxxxxx Decks Contract No: A4 - Timber Payment Rates, applicable to B3.1 and B4.0 A4a - For Species and Products to be Paid for at Rates Escalated under B3.2 Not Applicable A4b - For Species and Products to be Paid for at Flat Rates Species Product Rates per Unit of Measure Rates per Required Species Product Unit of Measure Base $ Advertised $ Bid Premium $ Bid (Flat) $ Required Deposits Slash Disposal $ Lodgepole Pine and other Coniferous Species Combined Softwood Sawtimber Ton .10 .10 .00 1.49 .47 Ponderosa Pine Sawtimber Ton .00 1.49 .47 Timber Subject to Agreement under C2.11# Other Softwood Other Grn Bio Cv & Saw Sawtimber Ton .10 .10 .00 For purposes of convenience in collection and bookkeeping, Bid Rates stated in A4 include payment of deposits for sale area betterment required pursuant to 16 USC 576b. Such deposits are not included as Required Deposits defined hereunder. Sale Name: Sybel Fuels Reduction Reoffer Xxxxxx Decks Contract No: The following definitions are established for the terms used in A4: Base Rates are the lowest rates of payment for timber that are authorized by this contract. Base Rates remain constant throughout the life of this contract and are not subject to change by rate redetermination, except for reduction under B3.31, B3.32, or B3.33. Advertised Rates are the minimum acceptable Bid Rates for timber, exclusive of Required Deposits. These rates are those indicated by appraisal, with a cost allowance made for construction of Specified Roads listed in A7, but are never less than Base Rates. Bid Premium Rates are the amounts by which Purchaser's bid is in excess of Advertised Rates. The Bid Premium Rates are constant during this contract, except as provided in B3.31, B3.32, and B3.33. Bid Rates are the rates bid by Purchaser (exclusive of Required Deposits for slash disposal, road maintenance, and contract scaling) and are the sum of Advertised Rates and Bid Premium Rates. Until a rate redetermination becomes effective, the Bid Rate for species and products in A4a is the Tentative Rate that is subject to quarterly adjustment under B3.2; for species and products in A4b, the Bid Rate is the Flat Rate. Required Deposits are deposits that Purchaser may be required to pay for slash disposal (16 USC 490), road maintenance (16 USC 537), and contract scaling (1994 Appropriations Act). Required Deposits may be adjusted as part of a rate redetermination or a Contract Term Extension. The table shows only Required Deposits for slash disposal; road maintenance deposits, if any, are given in C5.32#; and contract scaling deposits, if any, are given in C6.816#. Base Index is the specified average of the lumber or other product selling value index used as the basis for computing adjustment in rates for variance in product selling value, as provided in B3.2. A5 - Indices Used in Quarterly Adjustment, applicable to B3.2 Not Applicable A6 - High Stumps, applicable to B6.412 Species Product Maximum Xxxxx Height * (inches) All Combined Softwood Sawtimber 12 * * 12 inches Sale Name: Xxxxxx Decks Contract No: A7 - Specified Roads, applicable to B5.2 Name and Date of Governing Road Specifications: Project Design Class Approx. Length (mi./km.) Sheet Numbers and Approval Date Performance Responsibility Road No. Name Survey Design Construction Staking 1/ NOT APPLICABLE 1/ Indicate timing, i.e., before clearing (BC) or 1/3 after clearing (AC). Applicable to B5.212. A8 - Forest Service Engineering Completion Schedule, applicable to B5.21 Road No. Road Name Type of Work Completion Date NOT APPLICABLE Sale Name: Xxxxxx Decks Contract No: A9 - Scaling Instructions and Specifications, applicable to B6.8 Name and Date of Governing Instructions: National Forest Cubic Scaling Handbook, FSH 2409.11a, as amended. Cubic Taper 4 as authorized by Regional Forester, February 2001. Scaling Specifications Species Product Maximum Scaling Length (feet) Trim Allowance Diameter Range (inches) Length Range (feet) Trim Allowance (inches) Combined Softwood Sawtimber 20 ALL ALL 6 A10 - Scaling Services, applicable to B6.81 Species Product Unit of Measure Site and Geographic Location Method Standard Estimated Cost per Unit $ Combined Softwood Sawtimber Ton Sale Area Total (100%) Weight Scale .00 Sale Name: Xxxxxx Decks Contract No: A11 - Minimum Scaling Volumes, applicable to B6.81 Minimum volume for Continuous Scaling Services in two-week period N/A Ton per scaler Minimum volume for Intermittent Scaling Services N/A Ton on a N/A basis A12 - Fire Precautionary Period, applicable to B7.2 May 01 to December 01 , inclusive A13 - Purchaser Responsibility to Furnish Crews and Equipment for: Initial Fire Supression, applicable to B7.3 Within 25 road miles Fire Suppression Reinforcement, applicable to B7.312 and B 7.313 Within 100 road miles A14 - Purchaser's Obligation per Operations Fire, applicable to B7.41 Maximum Amount: $ $ .00 A15 - Termination Date, applicable to B8.2 November 30, 2023 A16 - Normal Operating Season, applicable to B6.31, B6.66, B8.21 and B9.3 First Period: June 01 to October 31 , inclusive Second Period: to , inclusive A17 - Performance Bond Amount, applicable to B9.1 A18 - Downpayment, applicable to B4.211 Downpayment Amount: A19 - Periodic Payment Amount, applicable to B4.213 Periodic Payment Determination Date Amount Initial Payment: Additional Payment: A20 - Market-Related Contract Term Addition Producer Price Index, applicable to B8.212 Index Name: Softwood Lumber Index Number: 0811 Sale Name: Xxxxxx Decks Contract No: A21 - Inapplicable Standard Provisions The following listed Sections, Subsections, or Items of Division B-Standard Provisions - are hereby made inapplicable. (Instructions: List by reference number and title.) B3.34 B4.211 B4.213 B4.3 B4.31 B4.4 B6.341 B6.841 B8.212 B8.64 B9.1 B9.11 EMERGENCY RATE REDETERMINATION DOWNPAYMENT PERIODIC PAYMENT SCHEDULE PAYMENT GUARANTEED BY BOND OR DEPOSITED SECURITIES BLANKET BOND PAYMENTS NOT RECEIVED PREVENTION OF OIL SPILLS ROUTE OF HAUL MARKET-RELATED CONTRACT TERM ADDITION DEBARMENT AND SUSPENSION CERTIFICATION PERFORMANCE BOND BOND REDUCTION A22 - List of Special Provisions The following listed special provisions are attached to and made a part of this contract as Division C. Provisions with reference numbers followed by # contain blanks into which data have been entered for this sale. (Instructions: List by reference number, title, and date.) C2.11# C2.35# C3.34 C4.211 C4.212 C4.213 C4.3 C4.31 C4.4 C5.31# C5.35# C6.331 C6.341 C6.37 C6.41# C6.42# C6.6# C6.7# C6.815 C6.841 (Option 1) C7.2# C7.22# C8.64 C8.66# (Option 1) C9.1 C9.11 TIMBER SUBJECT TO AGREEMENT (02/1971) DESIGNATION OF TIMBER, CUTTING UNIT BOUNDARIES, AND SUBDIVISION/PAYMENT UNIT BOUNDARIES (06/2012) EMERGENCY RATE REDETERMINATION (06/2022) DOWNPAYMENT. (07/2022) TEMPORARY REDUCTION OF DOWNPAYMENT (08/2009) PERIODIC PAYMENT. (07/2022) PAYMENT GUARANTEED BY BOND (08/2021) BLANKET BOND (08/2021) PAYMENTS NOT RECEIVED (08/2012) ROAD MAINTENANCE REQUIREMENTS (07/2001) ROAD AND WATER SUPPLY USE (05/2008) LOG TRUCKING (08/2006) PREVENTION OF OIL DISCHARGES. (07/2022) SUBSTITUTE METHODS (08/2006) XXXXXXX, XXXXXXX, AND LIMBING (08/2007) GROUND BASED SKIDDING (08/2006) EROSION PREVENTION AND CONTROL (05/2008) SLASH TREATMENT (08/2006) THIRD PARTY SCALING SERVICES (04/2004) ROUTE OF HAUL. (07/2022) SPECIFIED FIRE PRECAUTIONS (06/2012) EMERGENCY PRECAUTIONS (06/2012) DEBARMENT AND SUSPENSION CERTIFICATION (03/2018) USE OF TIMBER (04/2004) PERFORMANCE BOND (08/2021) BOND REDUCTION (08/2021) Sale Name: Xxxxxx Decks Contract No: This Page Intentionally Left Blank UNITED STATES DEPARTMENT OF AGRICULTURE Forest Service TIMBER SALE CONTRACT DIVISION B June 2006 (Date of Issue) STANDARD PROVISIONS FOR SCALED TIMBER SALES (Applicable to Timber Sales to be Scaled after Felling) This Division is organized into Parts, Sections, Sub- sections, and Items. These are numbered in accordance with the xxxxx diameterfollowing scheme: Part B1.0, whichever is greaterSection B1.1, minimum xxxxx height Sub- section B1.11, and Item B1.111. References to a Part in- clude all Sections, Subsections, and Items within that Part; references to a Section include all Subsections and Items within that Section; and references to a Subsection include all Items within that Subsection. Cross-references within this contract cite the reference number of 6 inchesthe appli- cable Division, Part, Section, Subsection, and Item. De- scriptive headings used are not to be considered in de- termining the rights and obligations of the parties. The Standard Provisions in this Division are subject to Specific Conditions of the contract stated in Division A. Wherever appropriate, Specific Conditions established in Division A are cited by reference number. The listing of Sections, Subsections, or Items of this Division in A21 has the effect of striking or deleting them from Division B. A22 lists Special Provisions that comprise Division C. Where appropriate, references to Special Provisions are made by citing the applicable reference numbers.

Sale Name. Sybel Fuels Reduction Reoffer Hog Fire Salvage Contract No: A4 - Timber Payment Rates, applicable to B3.1 and B4.0 A4a - For Species and Products to be Paid for at Rates Escalated under B3.2 Not Applicable A4b - For Species and Products to be Paid for at Flat Rates Species Product Rates per Unit of Measure Rates per Required Species Product Unit of Measure Base $ Advertised $ Bid Premium $ Bid (Flat) $ Required Deposits Slash Disposal $ Lodgepole Pine and other Coniferous Species Xxxxxxx Fir Sawtimber Ton .00 1.49 .47 MBF .50 .50 1.29 Incense Cedar Sawtimber MBF .50 .50 1.29 Ponderosa Pine Sawtimber Ton .00 1.49 .47 Timber Subject to Agreement under C2.11# Softwood Other Grn Bio Cv & Saw Ton MBF .50 .50 1.29 Sugar Pine Sawtimber MBF .50 .50 1.29 White Fir Sawtimber MBF .50 .50 1.29 For purposes of convenience in collection and bookkeeping, Bid Rates stated in A4 include payment of deposits for sale area betterment required pursuant to 16 USC 576b. Such deposits are not included as Required Deposits defined hereunder. Sale Name: Sybel Fuels Reduction Reoffer Hog Fire Salvage Contract No: The following definitions are established for the terms used in A4: Base Rates are the lowest rates of payment for timber that are authorized by this contract. Base Rates remain constant throughout the life of this contract and are not subject to change by rate redetermination, except for reduction under B3.31, B3.32, or B3.33. Advertised Rates are the minimum acceptable Bid Rates for timber, exclusive of Required Deposits. These rates are those indicated by appraisal, with a cost allowance made for construction of Specified Roads listed in A7, but are never less than Base Rates. Bid Premium Rates are the amounts by which Purchaser's bid is in excess of Advertised Rates. The Bid Premium Rates are constant during this contract, except as provided in B3.31, B3.32, and B3.33. Bid Rates are the rates bid by Purchaser (exclusive of Required Deposits for slash disposal, road maintenance, and contract scaling) and are the sum of Advertised Rates and Bid Premium Rates. Until a rate redetermination becomes effective, the Bid Rate for species and products in A4a is the Tentative Rate that is subject to quarterly adjustment under B3.2; for species and products in A4b, the Bid Rate is the Flat Rate. Required Deposits are deposits that Purchaser may be required to pay for slash disposal (16 USC 490), road maintenance (16 USC 537), and contract scaling (1994 Appropriations Act). Required Deposits may be adjusted as part of a rate redetermination or a Contract Term Extension. The table shows only Required Deposits for slash disposal; road maintenance deposits, if any, are given in C5.32#; and contract scaling deposits, if any, are given in C6.816#. Base Index is the specified average of the lumber or other product selling value index used as the basis for computing adjustment in rates for variance in product selling value, as provided in B3.2. A5 - Indices Used in Quarterly Adjustment, applicable to B3.2 Not Applicable A6 - High Stumps, applicable to B6.412 Species Product Maximum Xxxxx Height * (inches) All Sawtimber 12 * * 12 inches Sale Name: Hog Fire Salvage Contract No: A7 - Specified Roads, applicable to B5.2 Name and Date of Governing Road Specifications: FP-14 Federal Highway Administration Standard Specifications for Construction of Roads and Bridges on Federal Highway Projects, as amended and supplemented (English) Project Design Appro. Length (mi./km.) Sheet Numbers and Approval Date Performance Responsibility Class Survey Design Construction Staking 1/ Road No. Name 30N03 GOUMAZ (R) (segment 0 to 5.64) Single Lane - 15 mph 5.64 / 9.08 10 01/08/2021 FS FS FS BC 30N03C XXXXX XXX SPUR (R) (segment 0 to 1.21) Single Lane - 15 mph 1.21 / 1.95 10 01/08/2021 FS FS FS BC 30N82 LITTLE FREDONYER SPUR (R) (segment 0 to .57) Single Lane - 15 mph .57 / .92 10 01/08/2021 FS FS FS BC 30N84 SO GOAT MTN (R) (segment 0 to 2.04) Single Lane - 15 mph 2.04 / 3.28 10 01/08/2021 FS FS FS BC 1/ Indicate timing, i.e., before clearing (BC) or 1/3 the xxxxx diameterafter clearing (AC). Applicable to B5.212. A8 - Forest Service Engineering Completion Schedule, whichever is greaterapplicable to B5.21 Road No. Road Name Type of Work Completion Date 30N03 GOUMAZ (R) (segment 0 to 5.64) Survey and Design and Construction Stakin 10/31/2021 30N03C XXXXX XXX SPUR (R) (segment 0 to 1.21) Survey and Design and Construction Stakin 10/31/2021 30N82 LITTLE FREDONYER SPUR (R) (segment 0 to .57) Survey and Design and Construction Stakin 10/31/2021 30N84 SO GOAT MTN (R) (segment 0 to 2.04) Survey and Design and Construction Stakin 10/31/2021 A9 - Scaling Instructions and Specifications, minimum xxxxx height applicable to B6.8 Name and Date of Governing Instructions: National Forest Log Scaling Handbook, FSH 2409.11. Scaling Specifications Species Product Maximum Scaling Length (feet) Trim Allowance Diameter Range (inches) Length Range (feet) Trim Allowance (inches) All Sawtimber 20 ALL ALL 6 inchesSale Name: Hog Fire Salvage Contract No: A10 - Scaling Services, applicable to B6.81 Species Product Unit of Measure Site and Geographic Location Method Standard Estimated Cost per Unit $ All Sawtimber MBF Sale Area Conventional (100%) Log Scale .00 A11 - Minimum Scaling Volumes, applicable to B6.81 Minimum volume for Continuous Scaling Services in two-week period 0 MBF per scaler Minimum volume for Intermittent Scaling Services 0 MBF on a MONTH basis A12 - Fire Precautionary Period, applicable to B7.2 May 01 to December 01 , inclusive A13 - Purchaser Responsibility to Furnish Crews and Equipment for: Initial Fire Supression, applicable to B7.3 Within 25 road miles Fire Suppression Reinforcement, applicable to B7.312 and B 7.313 Within 100 road miles A14 - Purchaser's Obligation per Operations Fire, applicable to B7.41 Maximum Amount: $ $37,800.00 A15 - Termination Date, applicable to B8.2 March 31, 2023 A16 - Normal Operating Season, applicable to B6.31, B6.66, B8.21 and B9.3 First Period: June 01 to October 31 , inclusive Second Period: to , inclusive A17 - Performance Bond Amount, applicable to B9.1 A18 - Downpayment, applicable to B4.211 Downpayment Amount: A19 - Periodic Payment Amount, applicable to B4.213 Periodic Payment Determination Date Amount Initial Payment: Additional Payment: July 16, 2022 August 16, 2022 A20 - Market-Related Contract Term Addition Producer Price Index, applicable to B8.212 Index Name: Not Applicable Index Number: N/A Sale Name: Hog Fire Salvage Contract No: A21 - Inapplicable Standard Provisions The following listed Sections, Subsections, or Items of Division B-Standard Provisions - are hereby made inapplicable. (Instructions: List by reference number and title.) B4.211 B4.4 B8.64 DOWNPAYMENT PAYMENTS NOT RECEIVED DEBARMENT AND SUSPENSION CERTIFICATION

Sale Name. Sybel Fuels Reduction Reoffer Crossbow Re-Offer (DxP) Contract No: A4 - Timber Payment Rates, applicable to B3.1 and B4.0 A4a - For Species and Products to be Paid for at Rates Escalated under B3.2 Not Applicable A4b - For Species and Products to be Paid for at Flat Rates Species Product Rates per Unit of Measure Rates per Required Species Product Unit of Measure Base $ Advertised $ Bid Premium $ Bid (Flat) $ Required Deposits Slash Disposal $ Lodgepole Pine Xxxxxxx-fir and other Western Larch Sawtimber Ton .84 .87 .29 White Fir and Other Coniferous Species Sawtimber Ton .00 1.49 .47 Ponderosa Pine Sawtimber Ton .00 1.49 .47 Timber Subject to Agreement under C2.11# Softwood .84 .87 .29 White Fir and Other Coniferous Species Grn Bio Cv & Saw Ton .84 .87 .29 For purposes of convenience in collection and bookkeeping, Bid Rates stated in A4 include payment of deposits for sale area betterment required pursuant to 16 USC 576b. Such deposits are not included as Required Deposits defined hereunder. Sale Name: Sybel Fuels Reduction Reoffer Crossbow Re-Offer (DxP) Contract No: The following definitions are established for the terms used in A4: Base Rates are the lowest rates of payment for timber that are authorized by this contract. Base Rates remain constant throughout the life of this contract and are not subject to change by rate redetermination, except for reduction under B3.31, B3.32, or B3.33. Advertised Rates are the minimum acceptable Bid Rates for timber, exclusive of Required Deposits. These rates are those indicated by appraisal, with a cost allowance made for construction of Specified Roads listed in A7, but are never less than Base Rates. Bid Premium Rates are the amounts by which Purchaser's bid is in excess of Advertised Rates. The Bid Premium Rates are constant during this contract, except as provided in B3.31, B3.32, and B3.33. Bid Rates are the rates bid by Purchaser (exclusive of Required Deposits for slash disposal, road maintenance, and contract scaling) and are the sum of Advertised Rates and Bid Premium Rates. Until a rate redetermination becomes effective, the Bid Rate for species and products in A4a is the Tentative Rate that is subject to quarterly adjustment under B3.2; for species and products in A4b, the Bid Rate is the Flat Rate. Required Deposits are deposits that Purchaser may be required to pay for slash disposal (16 USC 490), road maintenance (16 USC 537), and contract scaling (1994 Appropriations Act). Required Deposits may be adjusted as part of a rate redetermination or a Contract Term Extension. The table shows only Required Deposits for slash disposal; road maintenance deposits, if any, are given in C5.32#; and contract scaling deposits, if any, are given in C6.816#. Base Index is the specified average of the lumber or other product selling value index used as the basis for computing adjustment in rates for variance in product selling value, as provided in B3.2. A5 - Indices Used in Quarterly Adjustment, applicable to B3.2 Not Applicable A6 - High Stumps, applicable to B6.412 Species Product Maximum Xxxxx Height * (inches) All Sawtimber All 12 * * 12 inches Minimum Xxxxx Height is 6" on the high side of the xxxxx. Sale Name: Crossbow Re-Offer (DxP) Contract No: A7 - Specified Roads, applicable to B5.2 Name and Date of Governing Road Specifications: Project Design Class Approx. Length (mi./km.) Sheet Numbers and Approval Date Performance Responsibility Road No. Name Survey Design Construction Staking 1/ NOT APPLICABLE 1/ Indicate timing, i.e., before clearing (BC) or 1/3 after clearing (AC). Applicable to B5.212. A8 - Forest Service Engineering Completion Schedule, applicable to B5.21 Road No. Road Name Type of Work Completion Date NOT APPLICABLE Sale Name: Crossbow Re-Offer (DxP) Contract No: A9 - Scaling Instructions and Specifications, applicable to B6.8 Name and Date of Governing Instructions: FSH 2409.11a National Forest Cubic Log Scaling Handbook, as amended and supplemented. Fiber scaling rules apply to nonsawtimber products. Check scaling will be performed on individual scaling locations. Scaling Specifications Species Product Maximum Scaling Length (feet) Trim Allowance Diameter Range (inches) Length Range (feet) Trim Allowance (inches) All All 20 ALL ALL 6 A10 - Scaling Services, applicable to B6.81 Species Product Unit of Measure Site and Geographic Location Method Standard Estimated Cost per Unit $ All All Ton Purchaser shall request an alternate scaling site, B6.811, which meets the xxxxx diameter, whichever is greater, minimum xxxxx height of 6 inches.requirements contained in B6.814 Total (100%) Weight Scale .00

Sale Name. Sybel Fuels Reduction Reoffer Surprise Decks Salvage Contract No: A4 - Timber Payment Rates, applicable to B3.1 and B4.0 A4a - For Species and Products to be Paid for at Rates Escalated under B3.2 Not Applicable A4b - For Species and Products to be Paid for at Flat Rates Species Product Rates per Unit of Measure Rates per Required Species Product Unit of Measure Base $ Advertised $ Bid Premium $ Bid (Flat) $ Required Deposits Slash Disposal $ Lodgepole Pine and other Coniferous Species Combined Softwood Sawtimber Ton .00 1.49 .47 Ponderosa Pine Sawtimber Ton .00 1.49 .47 .96 22.09 1.05 Timber Subject to Agreement under C2.11# Combined Softwood Other Grn Bio Cv & Non-Saw Ton .35 For purposes of convenience in collection and bookkeeping, Bid Rates stated in A4 include payment of deposits for sale area betterment required pursuant to 16 USC 576b. Such deposits are not included as Required Deposits defined hereunder. Sale Name: Sybel Fuels Reduction Reoffer Surprise Decks Salvage Contract No: The following definitions are established for the terms used in A4: Base Rates are the lowest rates of payment for timber that are authorized by this contract. Base Rates remain constant throughout the life of this contract and are not subject to change by rate redetermination, except for reduction under B3.31, B3.32, or B3.33. Advertised Rates are the minimum acceptable Bid Rates for timber, exclusive of Required Deposits. These rates are those indicated by appraisal, with a cost allowance made for construction of Specified Roads listed in A7, but are never less than Base Rates. Bid Premium Rates are the amounts by which Purchaser's bid is in excess of Advertised Rates. The Bid Premium Rates are constant during this contract, except as provided in B3.31, B3.32, and B3.33. Bid Rates are the rates bid by Purchaser (exclusive of Required Deposits for slash disposal, road maintenance, and contract scaling) and are the sum of Advertised Rates and Bid Premium Rates. Until a rate redetermination becomes effective, the Bid Rate for species and products in A4a is the Tentative Rate that is subject to quarterly adjustment under B3.2; for species and products in A4b, the Bid Rate is the Flat Rate. Required Deposits are deposits that Purchaser may be required to pay for slash disposal (16 USC 490), road maintenance (16 USC 537), and contract scaling (1994 Appropriations Act). Required Deposits may be adjusted as part of a rate redetermination or a Contract Term Extension. The table shows only Required Deposits for slash disposal; road maintenance deposits, if any, are given in C5.32#; and contract scaling deposits, if any, are given in C6.816#. Base Index is the specified average of the lumber or other product selling value index used as the basis for computing adjustment in rates for variance in product selling value, as provided in B3.2. A5 - Indices Used in Quarterly Adjustment, applicable to B3.2 Not Applicable A6 - High Stumps, applicable to B6.412 Species Product Maximum Xxxxx Height * (inches) All Sawtimber All 12 * * 12 inches Sale Name: Surprise Decks Salvage Contract No: A7 - Specified Roads, applicable to B5.2 Name and Date of Governing Road Specifications: Project Design Class Approx. Length (mi./km.) Sheet Numbers and Approval Date Performance Responsibility Road No. Name Survey Design Construction Staking 1/ NOT APPLICABLE 1/ Indicate timing, i.e., before clearing (BC) or 1/3 after clearing (AC). Applicable to B5.212. A8 - Forest Service Engineering Completion Schedule, applicable to B5.21 Road No. Road Name Type of Work Completion Date NOT APPLICABLE A9 - Scaling Instructions and Specifications, applicable to B6.8 Name and Date of Governing Instructions: FSH2409.11a, National Forest Cubic Log Scaling Handbook, as amended and supplemented. Governing instructions for products contained in C(T) Provisions as follows: C6.822#, C6.823, C6.840, C6.849 Scaling Specifications Species Product Maximum Scaling Length (feet) Trim Allowance Diameter Range (inches) Length Range (feet) Trim Allowance (inches) Combined Softwood All 20 ALL ALL 6 Sale Name: Surprise Decks Salvage Contract No: A10 - Scaling Services, applicable to B6.81 Species Product Unit of Measure Site and Geographic Location Method Standard Estimated Cost per Unit $ All All Ton Forest Service Approved State Certified Scales Total (100%) Weight Scale .00 A11 - Minimum Scaling Volumes, applicable to B6.81 Minimum volume for Continuous Scaling Services in two-week period N/A Ton per scaler Minimum volume for Intermittent Scaling Services N/A Ton on a N/A basis A12 - Fire Precautionary Period, applicable to B7.2 May 10 to October 20 , inclusive A13 - Purchaser Responsibility to Furnish Crews and Equipment for: Initial Fire Supression, applicable to B7.3 Within 35 road miles Fire Suppression Reinforcement, applicable to B7.312 and B 7.313 Within 35 road miles A14 - Purchaser's Obligation per Operations Fire, applicable to B7.41 Maximum Amount: $ $1,300.00 A15 - Termination Date, applicable to B8.2 August 30, 2019 A16 - Normal Operating Season, applicable to B6.31, B6.66, B8.21 and B9.3 First Period: June 15 to October 15 , inclusive Second Period: to , inclusive A17 - Performance Bond Amount, applicable to B9.1 A18 - Downpayment, applicable to B4.211 Downpayment Amount: A19 - Periodic Payment Amount, applicable to B4.213 Periodic Payment Determination Date Amount Initial Payment: N/A N/A Additional Payment: N/A N/A A20 - Market-Related Contract Term Addition Producer Price Index, applicable to B8.212 Index Name: Not Applicable Index Number: N/A Sale Name: Surprise Decks Salvage Contract No: A21 - Inapplicable Standard Provisions The following listed Sections, Subsections, or Items of Division B-Standard Provisions - are hereby made inapplicable. (Instructions: List by reference number and title.) B4.211 B4.4 B6.23 B6.35 B6.85 B6.84 B6.841 DOWNPAYMENT PAYMENTS NOT RECEIVED PROTECTION OF LAND SURVEY MONUMENTS EQUIPMENT CLEANING SCALING LOST PRODUCTS ACCOUNTABILITY ROUTE OF HAUL A22 - List of Special Provisions The following listed special provisions are attached to and made a part of this contract as Division C. Provisions with reference numbers followed by # contain blanks into which data have been entered for this sale. (Instructions: List by reference number, title, and date.) See Attached Surprise Fire Decks C2.11# - TIMBER SUBJECT TO AGREEMENT (2/71) C2.2# - UTILIZATION AND REMOVAL OF INCLUDED PRODUCTS (4/03) C2.38# - SPECIES DESIGNATION (08/13/2018) C4.211 - DOWNPAYMENT (6/07) C4.212 - TEMPORARY REDUCTION OF DOWN PAYMENT (8/09) C4.4 - PAYMENTS NOT RECEIVED (8/12) C5.12# – USE OF ROADS BY PURCHASER (6/99) C5.31# – ROAD MAINTENANCE REQUIREMENTS (7/01) C5.316# - SNOW REMOVAL. (4/13) C5.32/3 – ROAD MAINTENANCE DEPOSIT SCHEDULE (8/12) C6.10 - PREWORK CONFERENCE (10/04) C6.23 - PROTECTION OF LAND SURVEY MONUMENTS (10/04) C6.316# - LIMITED OPERATING PERIOD (5/05) C6.332 - SAFETY (TIMBER HAULING) (1/18) C6.339 – ACCIDENT AND INJURY NOTIFICATION (4/05) C6.351# – WASHING EQUIPMENT (1/18) C6.4# - CONDUCT OF LOGGING (10/82) C6.6 - EROSION PREVENTION AND CONTROL (10/04) C6.602# - EROSION CONTROL SEEDING (04/02/18) C6.661 - CURRENT OPERATING AREAS (10/04) C6.7 - HAZARD REDUCTION AND SITE PREPARATION (3/89) C6.71 - CHANGE IN SLASH TREATMENTS (3/90) C6.822 - PRESENTATION FOR WEIGHT SCALING. (4/13) C6.823 - VOLUME DETERMINATION. (4/13) C6.840 - WEIGHT ACCOUNTABILITY (3/12) C6.849 - ROUTE OF HAUL. (4/13) C7.2 - NORMAL PRECAUTIONS (2/02) C8.64 – DEBARMENT AND SUSPENSION CERTIFICATION (3/18) C8.66# – USE OF TIMBER (Option 1) (4/04) UNITED STATES DEPARTMENT OF AGRICULTURE Forest Service TIMBER SALE CONTRACT DIVISION B June 2006 (Date of Issue) STANDARD PROVISIONS FOR SCALED TIMBER SALES (Applicable to Timber Sales to be Scaled after Felling) This Division is organized into Parts, Sections, Sub- sections, and Items. These are numbered in accordance with the xxxxx diameterfollowing scheme: Part B1.0, whichever is greaterSection B1.1, minimum xxxxx height Sub- section B1.11, and Item B1.111. References to a Part in- clude all Sections, Subsections, and Items within that Part; references to a Section include all Subsections and Items within that Section; and references to a Subsection include all Items within that Subsection. Cross-references within this contract cite the reference number of 6 inchesthe appli- cable Division, Part, Section, Subsection, and Item. De- scriptive headings used are not to be considered in de- termining the rights and obligations of the parties. The Standard Provisions in this Division are subject to Specific Conditions of the contract stated in Division A. Wherever appropriate, Specific Conditions established in Division A are cited by reference number. The listing of Sections, Subsections, or Items of this Division in A21 has the effect of striking or deleting them from Division B. A22 lists Special Provisions that comprise Division C. Where appropriate, references to Special Provisions are made by citing the applicable reference numbers.

Sale Name. Sybel Fuels Reduction Reoffer Contract No: A4 - Timber Payment Rates, applicable to B3.1 and B4.0 A4a - For Species and Products to be Paid for at Rates Escalated under B3.2 Not Applicable A4b - For Species and Products to be Paid for at Flat Rates Species Product Unit of Measure Rates per Unit of Measure Base $ Advertised $ Bid Premium $ Bid (Flat) $ Required Deposits Slash Disposal $ Lodgepole Pine and other Coniferous Species Sawtimber Ton .00 1.49 .47 Ponderosa Pine Sawtimber Ton .00 1.49 .47 Timber Subject to Agreement under C2.11# Softwood Other Grn Bio Cv & Saw Ton For purposes of convenience in collection and bookkeeping, Bid Rates stated in A4 include payment of deposits for sale area betterment required pursuant to 16 USC 576b. Such deposits are not included as Required Deposits defined hereunder. Sale Name: Sybel Fuels Reduction Reoffer Xxxxxx DTS Contract No: The following definitions are established for the terms used in A4AT4: Base Rates are the lowest rates of payment for timber that are authorized by this contract. Base Rates remain constant throughout the life of this contract and are not subject to change by rate redetermination, except for reduction under B3.31BT3.31, B3.32BT3.32, or B3.33BT3.33. Advertised Rates are the minimum acceptable Bid Rates for timber, exclusive of Required Deposits. These rates are those indicated by appraisal, with a cost allowance made for construction of Specified Roads listed in A7AT7, but are never less than Base Rates. Bid Premium Rates are the amounts by which Purchaser's bid is in excess of Advertised Rates. The Bid Premium Rates are constant during this contract, except as provided in B3.31BT3.31, B3.32BT3.32, and B3.33BT3.33. Bid Rates are the rates bid by Purchaser (exclusive of Required Deposits for slash disposal, disposal and road maintenance, and contract scaling) and are the sum of Advertised Rates and Bid Premium Rates. Until a rate redetermination becomes effective, the Bid Rate for species and products in A4a AT4a is the Tentative Rate that is subject to quarterly adjustment under B3.2BT3.2; for species and products in A4bAT4b, the Bid Rate is the Flat Rate. Required Deposits are deposits that Purchaser may be required to pay for slash disposal (16 USC 490), ) and road maintenance (16 USC 537), and contract scaling (1994 Appropriations Act). Required Deposits may be adjusted as part of a rate redetermination or a Contract Term Extension. The table shows only Required Deposits for slash disposal; road maintenance deposits, if any, are given in C5.32#; and contract scaling deposits, if any, are given in C6.816CT5.32#. Base Index is the specified average of the lumber or other product selling value index used as the basis for computing adjustment in rates for variance in product selling value, as provided in B3.2BT3.2. A5 AT5 - Indices Used in Quarterly Adjustment, applicable to B3.2 BT3.2 Not Applicable A6 SAMPLE AT6 - High Stumps, applicable to B6.412 BT6.412 Species Product Maximum Xxxxx Height * (inches) All Sawtimber All 12 * * Maximum xxxxx height is 12 inches or 1/3 the xxxxx diameter, whichever is greater, minimum xxxxx height of 6 inches.

Sale Name. Sybel Fuels Reduction Reoffer Contract No: A4 - Timber Payment Rates, applicable to B3.1 and B4.0 A4a - For Species and Products to be Paid for at Rates Escalated under B3.2 Not Applicable A4b - For Species and Products to be Paid for at Flat Rates Species Product Unit of Measure Rates per Unit of Measure Base $ Advertised $ Bid Premium $ Bid (Flat) $ Required Deposits Slash Disposal $ Lodgepole Pine and other Coniferous Species Sawtimber Ton .00 1.49 .47 Ponderosa Pine Sawtimber Ton .00 1.49 .47 Timber Subject to Agreement under C2.11# Softwood Other Grn Bio Cv & Saw Ton For purposes of convenience in collection and bookkeeping, Bid Rates stated in A4 include payment of deposits for sale area betterment required pursuant to 16 USC 576b. Such deposits are not included as Required Deposits defined hereunder. Sale Name: Sybel Fuels Reduction Reoffer Xxxxxx Hollow Contract No: The following definitions are established for the terms used in A4AT4: Base Rates are the lowest rates of payment for timber that are authorized by this contract. Base Rates remain constant throughout the life of this contract and are not subject to change by rate redetermination, except for reduction under B3.31BT3.31, B3.32BT3.32, or B3.33BT3.33. Advertised Rates are the minimum acceptable Bid Rates for timber, exclusive of Required Deposits. These rates are those indicated by appraisal, with a cost allowance made for construction of Specified Roads listed in A7AT7, but are never less than Base Rates. Bid Premium Rates are the amounts by which Purchaser's bid is in excess of Advertised Rates. The Bid Premium Rates are constant during this contract, except as provided in B3.31BT3.31, B3.32BT3.32, and B3.33BT3.33. Bid Rates are the rates bid by Purchaser (exclusive of Required Deposits for slash disposal, disposal and road maintenance, and contract scaling) and are the sum of Advertised Rates and Bid Premium Rates. Until a rate redetermination becomes effective, the Bid Rate for species and products in A4a AT4a is the Tentative Rate that is subject to quarterly adjustment under B3.2BT3.2; for species and products in A4bAT4b, the Bid Rate is the Flat Rate. Required Deposits are deposits that Purchaser may be required to pay for slash disposal (16 USC 490), ) and road maintenance (16 USC 537), and contract scaling (1994 Appropriations Act). Required Deposits may be adjusted as part of a rate redetermination or a Contract Term Extension. The table shows only Required Deposits for slash disposal; road maintenance deposits, if any, are given in C5.32#; and contract scaling deposits, if any, are given in C6.816CT5.32#. Base Index is the specified average of the lumber or other product selling value index used as the basis for computing adjustment in rates for variance in product selling value, as provided in B3.2BT3.2. A5 AT5 - Indices Used in Quarterly Adjustment, applicable to B3.2 BT3.2 Not Applicable A6 AT6 - High Stumps, applicable to B6.412 BT6.412 Species Product Maximum Xxxxx Height * (inches) All Black Walnut Sawtimber 12 * * Hardwood - Other Sawtimber 12 inches Pine Sawtimber 12 Pine Posts 6 Hardwood - Other Misc-Conv. 12 Sale Name: Xxxxxx Hollow Contract No: AT7 - Specified Roads, applicable to BT5.2 Name and Date of Governing Road Specifications: Federal Highway Administration Standard Specifications for Construction of Roads and Bridges on Federal Highway Projects(2003)-english Project Design Class Approx. Length (mi./km.) Sheet Numbers and Approval Date Performance Responsibility Survey Design Construction Staking 1/ Road No. Name 1006 LOG CABIN HOLLOW (R) (segment 0 to .21) Single Lane - 10 mph .21 / .34 2 02/12/2020 FS FS FS BC 1/ Indicate timing, i.e., before clearing (BC) or 1/3 the after clearing (AC). Applicable to BT5.212. AT8 - Forest Service Engineering Completion Schedule, applicable to BT5.21 Road No. Road Name Type of Work Completion Date NOT APPLICABLE AT9 - Fire Precautionary Period, applicable to BT7.2 October 01 to May 31 , inclusive AT10 - Purchaser Responsibility to Furnish Crews and Equipment for: Initial Fire Supression, applicable to BT7.3 Within 1 road miles Fire Suppression Reinforcement, applicable to BT7.312 and BT7.313 Within 5 road miles AT11 - Purchaser's Obligation per Operations Fire, applicable to BT7.41 Maximum Amount: $ $1,500 AT12 - Termination Date, applicable to BT8.2 June 30, 2023 AT13 - Normal Operating Season, applicable to BT6.31, BT6.66, BT8.21 and BT9.3 First Period: April 01 to November 30 , inclusive Second Period: to , inclusive AT14 - Performance Bond, applicable to BT9.1 Performance Bond Amount: Sale Name: Xxxxxx Hollow Contract No: AT15 - Downpayment, applicable to BT4.211 Downpayment Amount: AT16 - Periodic Payment Amount, applicable to BT4.213 Periodic Payment Determination Date Amount Initial Payment: August 01, 2022 Additional Payment: AT17 - Market-Related Contract Term Addition Producer Price Index, applicable to BT8.212 Index Name: Hardwood Lumber Index Number: 0812 AT18 - Inapplicable Standard Provisions The following listed Sections, Subsections, or Items of Division BT - Standard Provisions - are hereby made inapplicable. (Instructions: List by reference number and title.) BT4.211 BT4.4 BT8.212 BT8.64 DOWNPAYMENT PAYMENTS NOT RECEIVED MARKET-RELATED CONTRACT TERM ADDITION DEBARMENT AND SUSPENSION CERTIFICATION AT19 - List of Special Provisions The following listed special provisions are attached to and made a part of this contract as Division CT. Provisions with reference numbers followed by # contain blanks into which data have been entered for this sale. (Instructions: List by reference number, title, and date.) CT2.11# CT2.302# CT2.355# CT4.211 CT4.212 CT4.4 CT5.103# CT5.13# CT5.31# CT6.313# CT6.314# CT6.412 CT6.6# CT6.63# CT6.7# CT7.2 CT8.212 CT8.64 CT8.71 TIMBER SUBJECT TO AGREEMENT (06/1972) BOUNDARY TREES (06/2009) INDIVIDUAL TREES, CUT TREE MARKING (06/2009) DOWNPAYMENT (06/2007) TEMPORARY REDUCTION OF DOWNPAYMENT (08/2009) PAYMENTS NOT RECEIVED (08/2012) APPROACHES TO SURFACED ROADS (06/2009) ROAD COMPLETION DATE (04/2004) ROAD MAINTENANCE REQUIREMENTS (07/2001) CUTTING SCHEDULE (06/2009) OPERATING REQUIREMENTS (06/2009) XXXXX MARKS (06/2009) EROSION PREVENTION VEGETATION (06/2009) TEMPORARY ROAD CLOSURE (06/2009) SLASH DISPOSAL MEASURES (06/2009) FIRE PRECAUTIONS (06/2009) MARKET-RELATED CONTRACT TERM ADDITION (11/2008) DEBARMENT AND SUSPENSION CERTIFICATION (03/2018) TRIPARTITE LAND EXCHANGE (04/1999) CT2.11# - TIMBER SUBJECT TO AGREEMENT (06/1972) In addition, there is within Sale Area an unestimated quantity of: Species Product Hardwood - Other (Topwood) Pulpwood Pine (Topwood) Pulpwood Hardwood - Other Fuelwood that shall be Included Timber upon written agreement. CT2.302# - BOUNDARY TREES (06/2009) Boundary trees for all harvest units have been designated with ORANGE paint marks above and below xxxxx diameterheight. Boundary trees shall not be cut. CT2.355# - INDIVIDUAL TREES, whichever is greater, minimum CUT TREE MARKING (06/2009) Individual trees to be cut are Marked with indicated color above and below xxxxx height in all or parts of the following Payment Unit(s). Areas of cut tree marking are shown on the Sale Area Map with the symbol "CTM." PAYMENT UNIT(S) PAINT COLOR Sale Name: Xxxxxx Hollow Page 141 Contract 2400-6T,(6/06) FS-2400-6T (6/06) CT2.355# - INDIVIDUAL TREES, CUT TREE MARKING. (06/2009) Cut Tree Marking Table Paint Units Paint Color 1 Green 2 Blue 3 Green 4 Green 5 Blue 6 inches.Green 7 Blue 8 Green 9 Blue 00 Xxxxxx (Xxxx Unit) Sale Name: Xxxxxx Hollow Page 142 CT4.211 - DOWNPAYMENT (06/2007) The downpayment amount shown in AT15 may not be applied toward any other payment required under the provisions of this contract, except damages determined pursuant to BT9.4, transferred to other timber sales, or refunded until (a) stumpage value representing 25 percent of the total bid value of the timber sale is shown on Timber Sale Account to have been cut, removed, and paid for, or (b) the estimated value remaining to be cut and removed, as shown on Timber Sale Account, is equal to or less than the amount of the downpayment, or (c) if 36 CFR 223.49(e) is applicable, the estimated value remaining to be cut and removed, as shown on Timber Sale Account, is equal to or less than the amount of the downpay-ment. For lump sum timber sales, the downpayment may be applied to payment for release of the single payment unit. If Forest Service makes a determination that this contract should not have been included under in- creased downpayment requirements (36 CFR 223.49(e)), the downpayment shall be revised and applied in accordance with 36 CFR 223.49(f). CT4.212 - TEMPORARY REDUCTION OF DOWNPAYMENT (08/2009) Notwithstanding BT4.211 or CT4.211, upon the Purchaser's written request Forest Service may temporarily reduce the downpayment when Purchaser's scheduled operations are delayed or interrupted for 30 or more consecutive days, or the contract term is extended for 30 or more consecutive days for any of the following reasons:

Sale Name. Sybel Fuels Reduction Reoffer Contract No: A4 - Timber Payment Rates, applicable to B3.1 and B4.0 A4a - For Species and Products to be Paid for at Rates Escalated under B3.2 Not Applicable A4b - For Species and Products to be Paid for at Flat Rates Species Product Unit of Measure Rates per Unit of Measure Base $ Advertised $ Bid Premium $ Bid (Flat) $ Required Deposits Slash Disposal $ Lodgepole Pine and other Coniferous Species Sawtimber Ton .00 1.49 .47 Ponderosa Pine Sawtimber Ton .00 1.49 .47 Timber Subject to Agreement under C2.11# Softwood Other Grn Bio Cv & Saw Ton For purposes of convenience in collection and bookkeeping, Bid Rates stated in A4 include payment of deposits for sale area betterment required pursuant to 16 USC 576b. Such deposits are not included as Required Deposits defined hereunder. Sale Name: Sybel Fuels Reduction Reoffer The Docks SBA Contract No: The following definitions are established for the terms used in A4AT4: Base Rates are the lowest rates of payment for timber that are authorized by this contract. Base Rates remain constant throughout the life of this contract and are not subject to change by rate redetermination, except for reduction under B3.31BT3.31, B3.32BT3.32, or B3.33BT3.33. Advertised Rates are the minimum acceptable Bid Rates for timber, exclusive of Required Deposits. These rates are those indicated by appraisal, with a cost allowance made for construction of Specified Roads listed in A7AT7, but are never less than Base Rates. Bid Premium Rates are the amounts by which Purchaser's bid is in excess of Advertised Rates. The Bid Premium Rates are constant during this contract, except as provided in B3.31BT3.31, B3.32BT3.32, and B3.33BT3.33. Bid Rates are the rates bid by Purchaser (exclusive of Required Deposits for slash disposal, disposal and road maintenance, and contract scaling) and are the sum of Advertised Rates and Bid Premium Rates. Until a rate redetermination becomes effective, the Bid Rate for species and products in A4a AT4a is the Tentative Rate that is subject to quarterly adjustment under B3.2BT3.2; for species and products in A4bAT4b, the Bid Rate is the Flat Rate. Required Deposits are deposits that Purchaser may be required to pay for slash disposal (16 USC 490), ) and road maintenance (16 USC 537), and contract scaling (1994 Appropriations Act). Required Deposits may be adjusted as part of a rate redetermination or a Contract Term Extension. The table shows only Required Deposits for slash disposal; road maintenance deposits, if any, are given in C5.32#; and contract scaling deposits, if any, are given in C6.816CT5.32#. Base Index is the specified average of the lumber or other product selling value index used as the basis for computing adjustment in rates for variance in product selling value, as provided in B3.2BT3.2. A5 AT5 - Indices Used in Quarterly Adjustment, applicable to B3.2 BT3.2 Not Applicable A6 AT6 - High Stumps, applicable to B6.412 BT6.412 Species Product Maximum Xxxxx Height * (inches) All Sawtimber 12 * * 12 inches or 1/3 the xxxxx diameter, whichever is greater, minimum xxxxx height of 6 inches.14 All Pulpwood 10 SAMPLE