Security Program Contractor will develop and implement an effective security program for the Project Site, which program shall require the Contractor and subcontractors to take measures for the protection of their tools, materials, equipment, and structures. As between Contractor and Owner, Contractor shall be solely responsible for security against theft of and damage of all tools and equipment of every kind and nature and used in connection with the Work, regardless of by whom owned.
Security Protocols Both parties agree to maintain security protocols that meet industry standards in the transfer or transmission of any data, including ensuring that data may only be viewed or accessed by parties legally allowed to do so. Provider shall maintain all data obtained or generated pursuant to the Service Agreement in a secure digital environment and not copy, reproduce, or transmit data obtained pursuant to the Service Agreement, except as necessary to fulfill the purpose of data requests by LEA.
Program Changes Contractor agrees to inform the County of any alteration in program or service delivery at least thirty (30) days prior to the implementation of the change, or as soon as reasonably feasible.
Information Security Program (1) DTI shall implement and maintain a comprehensive written information security program applicable to the Personal Information ("Information Security Program") which shall include commercially reasonable measures, including, as appropriate, policies and procedures and technical, physical, and administrative safeguards that are consistent with industry standards, providing for (i) the security and confidentiality of the Personal Information, (ii) protection of the Personal Information against reasonably foreseeable threats or hazards to the security or integrity of the Personal Information, (iii) protection against unauthorized access to or use of or loss or theft of the Personal Information, and (iv) appropriate disposal of the Personal Information. Without limiting the generality of the foregoing, the Information Security Program shall provide for (i) continual assessment and re-assessment of the risks to the security of Personal Information acquired or maintained by DTI and its agents, contractors and subcontractors in connection with the Services, including but not limited to (A) identification of internal and external threats that could result in unauthorized disclosure, alteration or destruction of Personal Information and systems used by DTI and its agents, contractors and subcontractors, (B) assessment of the likelihood and potential damage of such threats, taking into account the sensitivity of such Personal Information, and (C) assessment of the sufficiency of policies, procedures, information systems of DTI and its agents, contractors and subcontractors, and other arrangements in place, to control risks; and (ii) appropriate protection against such risks.
(2) The Information Security Program shall require encryption of any Personal Information in electronic format while in transit or in storage, and enhanced controls and standards for transport and disposal of physical media containing Personal Information. DTI shall, and shall require its agents, contractors and subcontractors who access or use Personal Information or Confidential Information to, regularly test key controls, systems and procedures relating to the Information Security Program ("ISP Tests"). DTI shall advise the Funds of any material issues identified in the ISP Tests potentially affecting the Information Security Program.
(3) DTI shall comply with its Information Security Program.
Security Procedures The Fund shall comply with data access operating standards and procedures and with user identification or other password control requirements and other security procedures as may be issued from time to time by State Street for use of the System on a remote basis and to access the Data Access Services. The Fund shall have access only to the Fund Data and authorized transactions agreed upon from time to time by State Street and, upon notice from State Street, the Fund shall discontinue remote use of the System and access to Data Access Services for any security reasons cited by State Street; provided, that, in such event, State Street shall, for a period not less than 180 days (or such other shorter period specified by the Fund) after such discontinuance, assume responsibility to provide accounting services under the terms of the Custodian Agreement.
Security Procedure The Client acknowledges that the Security Procedure it has designated on the Selection Form was selected by the Client from Security Procedures offered by State Street. The Client agrees that the Security Procedures are reasonable and adequate for its wire transfer transactions and agrees to be bound by any payment orders, amendments and cancellations, whether or not authorized, issued in its name and accepted by State Street after being confirmed by any of the selected Security Procedures. The Client also agrees to be bound by any other valid and authorized payment order accepted by State Street. The Client shall restrict access to confidential information relating to the Security Procedure to authorized persons as communicated in writing to State Street. The Client must notify State Street immediately if it has reason to believe unauthorized persons may have obtained access to such information or of any change in the Client’s authorized personnel. State Street shall verify the authenticity of all instructions according to the Security Procedure.
Contractor Changes The Contractor shall notify DAS in writing no later than ten (10) Days from the effective date of any change in:
a. its certificate of incorporation or other organizational document;
b. more than a controlling interest in the ownership of the Contractor; or
c. the individual(s) in charge of the Performance. This change shall not relieve the Contractor of any responsibility for the accuracy and completeness of the Performance. DAS, after receiving written notice by the Contractor of any such change, may require such agreements, releases and other instruments evidencing, to DAS’s satisfaction, that any individuals retiring or otherwise separating from the Contractor have been compensated in full or that provision has been made for compensation in full, for all work performed under terms of the Contract. The Contractor shall deliver such documents to DAS in accordance with the terms of DAS’s written request. DAS may also require, and the Contractor shall deliver, a financial statement showing that solvency of the Contractor is maintained. The death of any Contractor Party, as applicable, shall not release the Contractor from the obligation to Perform under the Contract; the surviving Contractor Parties, as appropriate, must continue to Perform under the Contract until Performance is fully completed.
PROPOSED MOBILITY PROGRAMME The proposed mobility programme includes the indicative start and end months of the agreed study programme that the student will carry out abroad. The Learning Agreement must include all the educational components to be carried out by the student at the receiving institution (in table A) and it must contain as well the group of educational components that will be replaced in his/her degree by the sending institution (in table B) upon successful completion of the study programme abroad. Additional rows can be added as needed to tables A and B. Additional columns can also be added, for example, to specify the study cycle-level of the educational component. The presentation of this document may also be adapted by the institutions according to their specific needs. However, in every case, the two tables A and B must be kept separated, i.e. they cannot be merged. The objective is to make clear that there needs to be no one to one correspondence between the courses followed abroad and the ones replaced at the sending institutions. The aim is rather that a group of learning outcomes achieved abroad replaces a group of learning outcomes at the sending institution, without having a one to one correspondence between particular modules or courses. A normal academic year of full-time study is normally made up of educational components totalling 60 ECTS* credits. It is recommended that for mobility periods shorter than a full academic year, the educational components selected should equate to a roughly proportionate number of credits. In case the student follows additional educational components beyond those required for his/her degree programme, these additional credits must also be listed in the study programme outlined in table A. When mobility windows are embedded in the curriculum, it will be enough to fill in table B with a single line as described below: Component code (if any) Component title (as indicated in the course catalogue) at the sending institution Semester [autumn / spring] [or term] Number of ECTS* credits Mobility window … Total: 30 Otherwise, the group of components will be included in Table B as follows: Component code (if any) Component title (as indicated in the course catalogue) at the sending institution Semester [autumn / spring] [or term] Number of ECTS* credits Course x … 10 Module y … 10 Laboratory work … 10 Total: 30 The sending institution must fully recognise the number of ECTS* credits contained in table A if there are no changes to the study programme abroad and the student successfully completes it. Any exception to this rule should be clearly stated in an annex of the Learning Agreement and agreed by all parties. Example of justification for non-recognition: the student has already accumulated the number of credits required for his/her degree and does not need some of the credits gained abroad. Since the recognition will be granted to a group of components and it does not need to be based on a one to one correspondence between single educational components, the sending institution must foresee which provisions will apply if the student does not successfully complete some of the educational components from his study programme abroad. A web link towards these provisions should be provided in the Learning Agreement. The student will commit to reach a certain level of language competence in the main language of instruction by the start of the study period. The level of the student will be assessed after his/her selection with the Erasmus+ online assessment tool when available (the results will be sent to the sending institution) or else by any other mean to be decided by the sending institution. A recommended level has been agreed between the sending and receiving institutions in the inter-institutional agreement. In case the student would not already have this level when he/she signs the Learning Agreement, he/she commits to reach it with the support to be provided by the sending or receiving institution (either with courses that can be funded by the organisational support grant or with the Erasmus+ online tutored courses). All parties must sign the document; however, it is not compulsory to circulate papers with original signatures, scanned copies of signatures or digital signatures may be accepted, depending on the national legislation. * In countries where the "ECTS" system it is not in place, in particular for institutions located in partner countries not participating in the Bologna process, "ECTS" needs to be replaced in all tables by the name of the equivalent system that is used and a weblink to an explanation to the system should be added. The section to be completed during the mobility is needed only if changes have to be introduced into the original Learning Agreement. In that case, the section to be completed before the mobility should be kept unchanged and changes should be described in this section. Changes to the mobility study programme should be exceptional, as the three parties have already agreed on a group of educational components that will be taken abroad, in the light of the course catalogue that the receiving institution has committed to publish well in advance of the mobility periods and to update regularly as ECHE holder. However, introducing changes might be unavoidable due to, for example, timetable conflicts. Other reasons for a change can be the request for an extension of the duration of the mobility programme abroad. Such a request can be made by the student at the latest one month before the foreseen end date. These changes to the mobility study programme should be agreed by all parties within four to seven weeks (after the start of each semester). Any party can request changes within the first two to five-week period after regular classes/educational components have started for a given semester. The exact deadline has to be decided by the institutions. The shorter the planned mobility period, the shorter should be the window for changes. All these changes have to be agreed by the three parties within a two-week period following the request. In case of changes due to an extension of the duration of the mobility period, changes should be made as timely as possible as well. Changes to the study programme abroad should be listed in table C and, once they are agreed by all parties, the sending institution commits to fully recognise the number of ECTS credits as presented in table C. Any exception to this rule should be documented in an annex of the Learning Agreement and agreed by all parties. Only if the changes described in table C affect the group of educational components in the student's degree (table B) that will be replaced at the sending institution upon successful completion of the study programme abroad, a revised version should be inserted and labelled as "Table D: Revised group of educational components in the student's degree that will be replaced at sending institution". Additional rows and columns can be added as needed to tables C and D. All parties must confirm that the proposed amendments to the Learning Agreement are approved. For this specific section, original or scanned signatures are not mandatory and an approval by email may be enough. The procedure has to be decided by the sending institution, depending on the national legislation.
CONTRACTOR NAME CHANGE An amendment is required to change the Contractor's name as listed on this Agreement. Upon receipt of legal documentation of the name change the State will process the amendment. Payment of invoices presented with a new name cannot be paid prior to approval of said amendment.
Product Changes Vocera shall have the right, in its absolute discretion, without liability to End User, to update to provide new functionality or otherwise change the design of any Product or to discontinue the manufacture or sale of any Product. Vocera shall notify End User at least 90 days prior to the delivery of any Product which incorporates a change that adversely affects form, fit or function (“Material Change”). Vocera shall also notify End User at least 90 days prior to the discontinuance of manufacture of any Product. Notification will be made as soon as reasonably practical for changes associated with regulatory or health and safety issues.
