Seller’s Connected Person Sample Clauses

Seller’s Connected Person. In this paragraph 2.1 and in paragraph 19.2, “
Sample 1
AutoNDA by SimpleDocs

Related to Seller’s Connected Person

  • Seller For each Mortgage Loan, the seller of such Mortgage Loan pursuant to the Mortgage Loan Purchase Agreement.

  • Trunk Group Connections and Ordering 5.2.1 For both One-Way and Two-Way Interconnection Trunks, if Onvoy wishes to use a technically feasible interface other than a DS1 or a DS3 facility at the POI, the Parties shall negotiate reasonable terms and conditions (including, without limitation, rates and implementation timeframes) for such arrangement; and, if the Parties cannot agree to such terms and conditions (including, without limitation, rates and implementation timeframes), either Party may utilize the Agreement’s dispute resolution procedures. 5.2.2 When One-Way or Two-Way Interconnection Trunks are provisioned using a DS3 interface facility, if Onvoy orders the multiplexed DS3 facilities to a Frontier Central Office that is not designated in the NECA 4 Tariff as the appropriate Intermediate Hub location (i.e., the Intermediate Hub location in the appropriate Tandem subtending area based on the LERG), and the provision of such facilities to the subject Central Office is technically feasible, the Parties shall negotiate in good faith reasonable terms and conditions (including, without limitation, rates and implementation timeframes) for such arrangement; and, if the Parties cannot agree to such terms and conditions (including, without limitation, rates and implementation timeframes), either Party may utilize the Agreement’s dispute resolution procedures. 5.2.3 Each Party will identify its Carrier Identification Code, a three or four digit numeric code obtained from Telcordia, to the other Party when ordering a trunk group. 5.2.4 For multi-frequency (MF) signaling each Party will out pulse ten (10) digits to the other Party, unless the Parties mutually agree otherwise. 5.2.5 Each Party will use commercially reasonable efforts to monitor trunk groups under its control and to augment those groups using generally accepted trunk- engineering standards so as to not exceed blocking objectives. Each Party agrees to use modular trunk-engineering techniques for trunks subject to this Attachment.

  • PURCHASER’S PROPERTY 6.1 Materials such as components, machinery, tools, models, moulds, jigs and fixtures, accessories or others which may be made available to the Supplier by the Purchaser for the purposes of the Contract shall be under the Supplier's responsibility, care and custody; the Supplier shall take out insurance against any damage that they might suffer and shall clearly mark them and record them as being the property of the Purchaser. 6.2 The Supplier agrees to refrain from using such materials other than for the purpose of the Contract; it shall keep them in good working order, except for normal wear and tear. 6.3 Any damage or deterioration that such materials may suffer due to improper use or negligence by the Supplier shall be repaired at its cost. Without prejudice to the other rights of the Purchaser, the Supplier shall return such materials upon first request. 6.4 Legal ownership in and/or the right to dispose of any such Purchaser items shall under no circumstances pass to the Supplier. Upon the Purchaser’s request, and without prejudice to Purchaser’s rights under the Contract, the Supplier, without delay, shall allow the Purchaser, and/or any third party mandated by the Purchaser, to enter any premises of the Supplier to 6.5 Ownership of toolsmanufacturedor acquired by the Supplier especially for thepurposes of the Contractsuchasmodels, moulds,jigsandfixtures, accessoriesorothers, shallbetransferred to the Purchaser at the time of their manufacture or acquisition by the Supplier. The Supplier shall return the tools to the Purchaser by the end of the performance of the Contract at the latest.

  • Seller’s Costs In connection with the sale of the Property contemplated under this Contract, Seller shall be responsible for all transfer and recordation taxes, including, without limitation, all transfer, mansion, excise, sales, use or bulk transfer taxes or like taxes on or in connection with the transfer of the Real Property and the Personal Property constituting part of the Property pursuant to the Xxxx of Sale, and all accrued taxes of Seller prior to Closing and income, sales and use taxes and other such taxes of Seller attributable to the sale of the Property to Buyer. Seller shall be responsible for all costs related to the termination of the Existing Management Agreement as provided in Article V. Seller shall also be responsible for any costs and expenses of its attorneys, accountants, appraisers and other professionals, consultants and representatives. Seller shall also be responsible for payment of all prepayment penalties and other amounts payable in connection with the pay-off of any liens and/or indebtedness encumbering all or any portion of the Property.

  • SELLERS 20 The member states initially anticipate that they will provide a monetary allowance to sellers 21 under Model 2 based on the following:

  • BUYER’S PROPERTY All tangible and intangible property, including information or data of any description, tools, materials, drawings, computer software, know-how, documents, trademarks, copyrights, equipment or material: (a) furnished to Supplier by Buyer; (b) specifically paid for by Buyer; or (c) created with Buyer’s IP Rights (defined in Section 5 below) shall be and remain Buyer’s personal property (collectively, “Buyer’s Property”). Such Buyer’s Property furnished by Buyer to Supplier shall be accepted by Supplier “AS IS” with all faults and without any warranty whatsoever, express or implied, shall be used by Supplier at its own risk, and shall be subject to removal and/or return at Buyer’s written request. Supplier shall not substitute any other property for Buyer’s Property. Promptly upon receipt of a removal request from Buyer, Supplier shall prepare such Buyer's Property for shipment and deliver it to Buyer at Supplier’s expense in the same condition as originally received by Supplier, reasonable wear and tear excepted. Prior to using Buyer’s Property, Supplier shall inspect it and train its personnel and other authorized users in its safe and proper operation. In addition, Supplier shall: (i) keep Buyer’s Property free of encumbrances and insured at Supplier’s expense at an amount equal to the replacement cost thereof with loss payable to Buyer; (ii) plainly mark or otherwise adequately identify Buyer’s Property as owned by Buyer; (iii) unless otherwise agreed to by Buyer in writing, store Buyer’s Property separate and apart from Supplier’s and third party owned property under Supplier’s control; (iv) maintain Buyer’s Property properly, and in compliance with any handling and storage requirements provided by Buyer, or that accompanied it when delivered to Supplier; (v) supervise the use of Buyer’s Property; and (vi) use Buyer’s Property only to meet Xxxxx’s Orders without disclosing or otherwise reproducing it for any other purpose.

  • Seller’s Expenses Seller agrees to pay all costs of releasing loans and recording the releases, preparation fees for the Deed. The insured closing fee and the disclosure of sales information form will be split equally between Seller and Buyer.

  • Buyer (Buyer) will take title 16 to the Property described below as Joint Tenants Tenants In Common Other .

  • Access Toll Connecting Trunk Group Architecture 9.2.1 If CSTC chooses to subtend a Verizon access Tandem, CSTC’s NPA/NXX must be assigned by CSTC to subtend the same Verizon access Tandem that a Verizon NPA/NXX serving the same Rate Center Area subtends as identified in the LERG. 9.2.2 CSTC shall establish Access Toll Connecting Trunks pursuant to applicable access Tariffs by which it will provide Switched Exchange Access Services to Interexchange Carriers to enable such Interexchange Carriers to originate and terminate traffic to and from CSTC’s Customers. 9.2.3 The Access Toll Connecting Trunks shall be two-way trunks. Such trunks shall connect the End Office CSTC utilizes to provide Telephone Exchange Service and Switched Exchange Access to its Customers in a given LATA to the access Tandem(s) Verizon utilizes to provide Exchange Access in such LATA. 9.2.4 Access Toll Connecting Trunks shall be used solely for the transmission and routing of Exchange Access to allow CSTC’s Customers to connect to or be connected to the interexchange trunks of any Interexchange Carrier which is connected to a Verizon access Tandem.

  • Assumed Liabilities On the Closing Date, Buyer or the UniSource Designee acquiring the Assets shall deliver to Seller the Assignment and Assumption Agreement pursuant to which Buyer or such UniSource Designee shall assume and agree to discharge when due, without recourse to Seller, in accordance with the respective terms and subject to the respective conditions thereof, all of the Assumed Liabilities. All of the following liabilities and obligations of Seller or Buyer which relate to, or arise by virtue of Seller's or Buyer's ownership of the Assets or operation of the Business (other than Excluded Liabilities) are referred to collectively as the "Assumed Liabilities": (a) all liabilities and obligations of Seller or Buyer arising on or after the Closing Date under the Assigned Agreements, the Real Property Leases, and the Transferable Permits in accordance with the terms thereof, including, without limitation, the Assigned Agreements entered into by Seller (i) prior to the date hereof and (ii) after the date hereof consistent with the terms of this Agreement, except in each case to the extent such liabilities and obligations, but for a breach or default by Seller, would have been paid, performed or otherwise discharged on or prior to the Closing Date and are not otherwise included among the items causing an adjustment to the Base Purchase Price contemplated in Section 3.3 or to the extent the same arise out of any such breach or default or out of any event which after the giving of notice or passage of time or both would constitute a default by Seller; (b) all liabilities and obligations of Seller for accounts payable to the extent included among the items causing an adjustment to the Base Purchase Price contemplated in Section 3.3; (c) all liabilities and obligations associated with the Assets or the Business in respect of Taxes for which Buyer is liable pursuant to Section 3.4 or 6.10(a) hereof; (d) all liabilities and obligations of Seller or Buyer with respect to the Transferred Employees incurred on or after the Closing Date for which Buyer is responsible pursuant to Section 6.12; (e) all liabilities, responsibilities and obligations of Seller or Buyer arising under Environmental Laws or relating to Environmental Conditions or Regulated Substances (including common law liabilities relating to Environmental Conditions and Regulated Substances), whether such liability, responsibility or obligation is known or unknown, contingent or accrued as of the Closing Date, including but not limited to: (i) costs of compliance (including capital, operating and other costs) relating to any violation or alleged violation of Environmental Laws occurring prior to, on or after the Closing Date, with respect to the ownership of the Assets or operation of the Business; (ii) property damage or natural resource damage (whether such damages were manifested before or after the Closing Date) arising from Environmental Conditions or Releases of Regulated Substances at, on, in, under, adjacent to, or migrating from any Assets prior to, on or after the Closing Date; (iii) any Remediation (whether or not such Remediation commenced before the Closing Date or commences after the Closing Date) of Environmental Conditions or Regulated Substances that are present or have been Released prior to, on or after the Closing Date, at, on, in, adjacent to or migrating from the Assets; (iv) any violations or alleged violations of Environmental Laws occurring on or after the Closing Date with respect to the ownership of any Assets or operation of the Business; (v) any bodily injury or loss of life arising from Environmental Conditions or Releases of Regulated Substances at, on, in, under, adjacent to or migrating from any Asset on or after the Closing Date; (vi) any bodily injury, loss of life, property damage, or natural resource damage arising from the storage, transportation, treatment, disposal, discharge, recycling or Release, at any Off-Site Location, or arising from the arrangement for such activities, on or after the Closing Date, of Regulated Substances generated in connection with the ownership of the Assets or the operation of the Business; and (vii) any Remediation of any Environmental Condition or Release of Regulated Substances arising from the storage, transportation, treatment, disposal, discharge, recycling or Release, at any Off-Site Location, or arising from the arrangement for such activities, on or after the Closing Date, of Regulated Substances generated in connection with the ownership or operation of the Assets; provided, that nothing set forth in this Section 2.3 shall require Buyer to assume any liabilities, responsibilities or obligations that are expressly excluded in Section 2.4; (f) any Tax that may be imposed by any federal, state or local government on the ownership, sale (except as otherwise provided in Section 3.4 or 6.10(a)), operation of the Business or use of the Assets on or after the Closing Date, except for any Income Taxes attributable to the income of Seller; (g) all liabilities and obligations of Seller or Buyer arising on and after the Closing Date under those Orders specifically relating to the Assets or the Business issued by or entered into with any Governmental Authority and listed in Schedule 2.3(g) or imposed on Buyer in any Required Regulatory Approval; (h) customer advances, customer deposits and construction advances, unperformed service obligations, Easement relocation obligations, and engineering and construction required to complete scheduled construction, construction work in progress, and other capital expenditure projects, in each case directly related to the Business and outstanding on or arising after the Closing Date; and (i) actions and proceedings based on conduct, actions, circumstances or conditions arising or occurring on or after the Closing Date, actions and proceedings described in Schedule 2.3(i), actions and proceedings arising from or directly related to any other Assumed Liability, and generic or industry-wide actions and proceedings outstanding on or arising on or after the Closing Date that are applicable to the Business.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!