Common use of SERVICES BY THE DESIGN PROFESSIONAL Clause in Contracts

SERVICES BY THE DESIGN PROFESSIONAL. ‌ 3.1 The services that the Design Professional will provide to the Owner under this Contract will be as follows, and in general accordance with the Owner’s Request for Qualifications dated April 6, 2018, entitled “Request for Qualifications for Runway 10-28 & Other Pavement Rehabilitation at Plant City Airport, Tampa, Florida”, the Design Professional’s response to the Owner’s Request for Qualifications dated May 18, 2018, entitled “Statement of Qualifications Runway 10-28 and Other Pavement Rehabilitation”, which are both incorporated herein by reference, and the Design Professional’s Fee and Scope Proposal dated September 25, 2018, entitled “Project No. 6620 19 Runway 10-28 and Other Pavement Rehabilitation Plant City Airport” which is attached hereto as Attachment 1 and incorporated herein by reference. In the event of any conflicts between this Contract and any other documents, the precedence in resolving such conflicts will be as follows: 3.1.1 This Contract 3.1.2 Individual work order and Design Professional’s associated Fee and Scope Proposal 3.1.3 The Owner’s Request for Qualifications 3.1.4 Design Professional’s response to Request for Qualifications 3.2 Design Professional designates Xxxxxx Xxxxxxxxx, whose business address is 0000 Xxxxxxxxx Xxxx., Xxxxx 000, Xxxxx, XX, 00000, and who is a qualified licensed professional, to serve as the project manager. The project manager will be authorized and responsible to act on behalf of the Design Professional with respect to directing, coordinating and administering all aspects of the services to be provided and performed under this Contract. Design Professional designates Xxxxxx X. Xxxxxxxxx, whose title is President - CEO, whose business address is 0000 Xxxxxxxxx Xxxx., Xxxxx 000, Xxxxx, XX, 00000, to have full authority to bind and obligate the Design Professional on all matters arising out of or relating to this Contract. The Design Professional agrees that the project manager will devote whatever time is required to satisfactorily manage the services to be provided and performed by the Design Professional hereunder. Any replacement of the project manager will be subject to the prior approval and acceptance of the Owner.

SERVICES BY THE DESIGN PROFESSIONAL. ‌ 3.1 The services that the Design Professional will provide to the Owner under this Contract will be as follows, and in general accordance with the Owner’s Request for Qualifications dated April 6November 9, 20182022, entitled “Request for Qualifications for Runway 10-28 & Other Pavement Rehabilitation General Aviation Airport Security Improvements at Tampa Executive, Xxxxx X. Xxxxxx and Plant City AirportAirports, TampaTampa and Plant City, Florida”, the Design Professional’s response to the Owner’s Request for Qualifications dated May 18January 23, 20182023, entitled “Statement of Qualifications Runway 10-28 for General Aviation Airport Security Improvements at Tampa Executive, Xxxxx X. Xxxxxx and Other Pavement RehabilitationPlant City Airports”, which are both incorporated herein by reference, and the Design Professional’s Fee and Scope Proposal dated September 25May 17, 20182023, entitled “Professional Engineering Services for FY 2023 Project No. 6620 19 Runway 10-28 and Other Pavement Rehabilitation Plant City Airport– General Aviation Airport Security Improvements HCAA Project Number: 7185 23” which is attached hereto as Attachment 1 and incorporated herein by reference. In the event of any conflicts between this Contract and any other documents, the precedence in resolving such conflicts will be as follows: 3.1.1 This Contract 3.1.2 Individual work order and Design Professional’s associated Fee and Scope Proposal 3.1.3 The Owner’s Request for Qualifications 3.1.4 Design Professional’s response to Request for Qualifications 3.2 Design Professional designates Xxxxxx XxxxxxxxxXxxx Pepper, P.E., whose business address is 0000 Xxxxxxxxx Xxxx.X. Xxxxxxxx Xxxxxx, Xxxxx 000, XxxxxXxxxxxx, XX, Xxxxxxx 00000-0000, and who is a qualified licensed General Aviation Airport Security Improvements professional, to serve as the project manager. The project manager will be authorized and responsible to act on behalf of the Design Professional with respect to directing, coordinating and administering all aspects of the services to be provided and performed under this Contract. Design Professional designates Xxxxxx X. XxxxxxxxxXxxxxxx Xxxxx, P.E. , whose title is President - CEOPresident, whose business address is 0000 Xxxxxxxxx Xxxx.X. Xxxxxxxx Xxxxxx, Xxxxx 000, XxxxxXxxxxxx, XX, Xxxxxxx 00000-0000, to have full authority to bind and obligate the Design Professional on all matters arising out of or relating to this Contract. The Design Professional agrees that the project manager will devote whatever time is required to satisfactorily manage the services to be provided and performed by the Design Professional hereunder. Any replacement of the project manager will be subject to the prior approval and acceptance of the Owner. 3.3 Basic services under this Contract will include those in Attachment 1. 3.4 Additional services under this Contract will, at the request of the Owner, include those in Attachment 1. 3.5 The Design Professional agrees, within seven days of receipt of a written request from the Owner, to promptly remove and replace the project manager, or any other personnel employed or retained by the Design Professional, or any subconsultants or subcontractors or any personnel of any such subconsultants or subcontractors engaged by the Design Professional to provide and perform services or work pursuant to the requirements of this Contract, whom the Owner will request in writing to be removed, which request may be made by the Owner with or without cause. 3.6 Work Order Process - work orders are intended to be discrete working documents that will provide, in summary form, the background and factual context within which a particular work element or series of work elements will be completed by the Design Professional. Each work order will include a scope of services, level of effort and related costs. Work orders will be construed to be in addition to, supplementary to, and consistent with the provisions of this Contract. Upon request by the Owner, Design Professional will prepare and submit a work order to the Owner for review and approval. Work order forms will be provided by the Owner along with a detailed outline of design deliverables. Contracts involving multiple project numbers or airport locations will require work orders to identify basic services and reimbursement expense amounts per project and/or location. 3.7 The Design Professional will perform professional services provided for in each work order executed between the parties. Such professional services will be performed in accordance with the terms of this Contract. The Design Professional will be solely responsible for the technical completeness and accuracy of all work performed under this Contract. 3.8 The Design Professional will comply with all Owner Rules and Regulations, Policies, Standard Procedures and Operating Directives. 3.9 The Design Professional is required to hire qualified consultants for the design phase of the Project. 3.10 The Design Professional will review laws applicable to design and construction of the Project, correlate such laws with the Owner’s Project requirements and advise the Owner if any Project requirement may cause a violation of such laws. Necessary changes to the Project will be accomplished by appropriate written modification or disclosed by written notification to the Owner. For the plans, specifications, construction contract documents, and any and all other engineering, construction and contractual documents produced by the Design Professional, the Design Professional will certify that: 3.10.1 The plans, specifications, construction contract documents, and any and all other engineering, construction and contractual documents shall be developed in accordance with sound engineering and design principles, and with generally accepted professional standards. 3.10.2 The plans, specifications, construction contract documents, and any and all other engineering, construction and contractual documents shall be consistent with the intent of the Project as defined in the FDOT Public Transportation Grant Agreement. 3.10.3 A review of the certification requirements listed in Section B.2. of Exhibit E of the FDOT Public Transportation Grant Agreement and a determination as to their applicability to this Project is performed. 3.10.4 The plans shall comply with all applicable laws, ordinances, zoning and permitting requirements, public notice requirements, and other similar regulations. 3.11 The Design Professional will comply fully with all applicable federal, state, county, municipal and other governmental laws, executive orders, wage, hour and labor, equal employment opportunity, disadvantaged business enterprises, pollution control and environmental regulations, applicable national and local codes, Florida Department of Transportation (FDOT) Policies, Guidelines, Standards, Manual of Uniform Minimum Standards for Design, Construction and Maintenance for Streets and Highways (commonly referred to as the “Florida Green Book”), Manual on Uniform Traffic Control Devices and requirements, FAA Advisory Circulars, and Owner’s Rules and Regulations. Any projects with FDOT funding require the Design Professional to comply with all applicable provisions of the FDOT Public Transportation Grant Agreement. The Design Professional will obtain all necessary permits, pay all required charges, fees and taxes and otherwise perform these services in a legal manner. In the event that any construction occurs on FDOT right of way, the Design Professional shall comply with all FDOT requirements contained in Exhibit C of the FDOT Public Transportation Grant Agreement. 3.12 When the Contractor considers that the whole work included in a construction contract, or a portion thereof designated in the contract documents for separate completion, is complete, the Contractor will notify the Owner and Design Professional in writing of the completion of the portion or the whole of the construction; and for all design work that originally required certification by a Professional Engineer, the Design Professional shall provide an Engineer’s Certification of Compliance, signed and sealed by a Professional Engineer, the form of which is attached to the FDOT Public Transportation Grant Agreement, to the Owner and Contractor in a timely manner. The certification shall state that work has been completed in compliance with the Project construction plans and specifications. If any deviations are found from the approved plans or specifications, the certification shall include a list of all deviations along with an explanation that justifies the reason to accept each deviation.

SERVICES BY THE DESIGN PROFESSIONAL. ‌ 3.1 The services that the Design Professional will provide to the Owner under this Contract will be as follows, and in general accordance with the Owner’s Request request for Qualifications qualifications dated April 6February 20, 20182015, entitled “Request for Qualifications for Runway 10-28 & Other Airfield Pavement Rehabilitation FY15, FY16 & FY17 at Plant City Tampa International Airport, Tampa, Florida”, the Design Professional’s response to the Owner’s Owner dated March 24, 2015, entitled “Request for Qualifications dated May 18Airfield Pavement Rehabilitation FY15, 2018FY16 & FY17 at Tampa International Airport, entitled “Statement of Qualifications Runway 10Solicitation No. 00-28 and Other Pavement Rehabilitation000-000”, which are both incorporated herein by reference, and the Design Professional’s Fee fee and Scope Proposal scope proposal dated September 25July 17, 20182015, entitled “Project No. 6620 19 Runway 10-28 and Other Airfield Pavement Rehabilitation Plant City AirportFY15, FY16 & FY17 At Tampa International Airport Scope and Fee Proposal” which is attached hereto as Attachment 1 and incorporated herein by reference. In the event of any conflicts between this Contract and any other documents, the precedence in resolving such conflicts will be as follows: 3.1.1 This Contract 3.1.2 Individual work order and Design Professional’s associated Fee fee and Scope Proposalscope proposal 3.1.3 The Owner’s Request request for Qualificationsqualifications 3.1.4 Design Professional’s response to Request request for Qualificationsqualifications 3.2 Design Professional designates Xxxxxx XxxxxxxxxXxxx X. Xxxx, P.E., whose business address is 0000 Xxxxxxxxx Xxxx.000 X. Xxxxxxxx Street Suite 150, Xxxxx 000Tampa, Xxxxx, XX, 00000FL 33602, and who is a qualified licensed professional, to serve as the project manager. The project manager will be authorized and responsible to act on behalf of the Design Professional with respect to directing, coordinating and administering all aspects of the services to be provided and performed under this Contract. Design Professional designates Xxxxxx X. Xxxxxxxxx, Xxxx whose title is President - CEOChairman, whose business address is 0000 Xxxxxxxxx Xxxx.000 00xx Xxxxxx, Xxxxx 000, Xxxx Xxxxx, XX, XX 00000, to have full authority to bind and obligate the Design Professional on all matters arising out of or relating to this Contract. The Design Professional agrees that the project manager will devote whatever time is required to satisfactorily manage the services to be provided and performed by the Design Professional hereunder. Any replacement of the project manager will be subject to the prior approval and acceptance of the Owner.

SERVICES BY THE DESIGN PROFESSIONAL. ‌ 3.1 The services that the Design Professional will provide to the Owner under this Contract will be as follows, and in general accordance with the Owner’s Request for Qualifications dated April 6November 4, 20182021, entitled “Request for Qualifications for Runway 10-28 & Other Pavement Rehabilitation Replace Airfield Perimeter Fence at Plant City Tampa International Airport, Tampa, Florida”, the Design Professional’s response to the Owner’s Request for Qualifications dated May 18December 15, 20182021, entitled “Statement of Qualifications Runway 10-28 and Other Pavement RehabilitationReplace Airfield Perimeter Fence at Tampa International Airport”, which are both incorporated herein by reference, and the Design Professional’s Fee and Scope Proposal dated September April 25, 20182022, entitled “HCAA Project No. 6620 19 Runway 10-28 and Other Pavement Rehabilitation Plant City AirportNumber 6800 22, Replace Airfield Perimeter Fence” which is attached hereto as Attachment 1 and incorporated herein by reference. In the event of any conflicts between this Contract and any other documents, the precedence in resolving such conflicts will be as follows: 3.1.1 This Contract 3.1.2 Individual work order and Design Professional’s associated Fee and Scope Proposal 3.1.3 The Owner’s Request for Qualifications 3.1.4 Design Professional’s response to Request for Qualifications 3.2 Design Professional designates Xxxxxx XxxxxxxxxXxxx Xxxxxxx, whose business address is 0000 Xxxxxxxxx Xxxx.Xxxxx Xxxx Xxxxxx, Xxxxx 000Suite 400, XxxxxTampa, XX, 00000FL 33607, and who is a qualified licensed professional, to serve as the project manager. The project manager will be authorized and responsible to act on behalf of the Design Professional with respect to directing, coordinating and administering all aspects of the services to be provided and performed under this Contract. Design Professional designates Xxxxxx X. XxxxxxxxxXxxxxxx Xxxxxx, whose title is President - CEOVice President, whose business address is 0000 Xxxxxxxxx Xxxx.00000 Xxxxxx Xxxxxx, Xxxxx 000Xxxxxxxxx, Xxxxx, XX, XX 00000, to have full authority to bind and obligate the Design Professional on all matters arising out of or relating to this Contract. The Design Professional agrees that the project manager will devote whatever time is required to satisfactorily manage the services to be provided and performed by the Design Professional hereunder. Any replacement of the project manager will be subject to the prior approval and acceptance of the Owner. 3.3 Basic services under this Contract will include those in Attachment 1. 3.4 Additional services under this Contract will, at the request of the Owner, include those in Attachment 1. 3.5 The Design Professional agrees, within seven days of receipt of a written request from the Owner, to promptly remove and replace the project manager, or any other personnel employed or retained by the Design Professional, or any subconsultants or subcontractors or any personnel of any such subconsultants or subcontractors engaged by the Design Professional to provide and perform services or work pursuant to the requirements of this Contract, whom the Owner will request in writing to be removed, which request may be made by the Owner with or without cause. 3.6 Work Order Process - work orders are intended to be discrete working documents that will provide, in summary form, the background and factual context within which a particular work element or series of work elements will be completed by the Design Professional. Each work order will include a scope of services, level of effort and related costs. Work orders will be construed to be in addition to, supplementary to, and consistent with the provisions of this Contract. Upon request by the Owner, Design Professional will prepare and submit a work order to the Owner for review and approval. Work order forms will be provided by the Owner along with a detailed outline of design deliverables. Contracts involving multiple project numbers or airport locations will require work orders to identify basic services and reimbursement expense amounts per project and/or location. 3.7 The Design Professional will perform professional services provided for in each work order executed between the parties. Such professional services will be performed in accordance with the terms of this Contract. The Design Professional will be solely responsible for the technical completeness and accuracy of all work performed under this Contract. 3.8 The Design Professional will comply with all Owner Rules and Regulations, Policies, Standard Procedures and Operating Directives. 3.9 The Design Professional is required to hire qualified consultants for the design phase of the Project. 3.10 The Design Professional will review laws applicable to design and construction of the Project, correlate such laws with the Owner’s Project requirements and advise the Owner if any Project requirement may cause a violation of such laws. Necessary changes to the Owner’s Project will be accomplished by appropriate written modification or disclosed by written notification to the Owner. For the plans, specifications, construction contract documents, and any and all other engineering, construction and contractual documents produced by the Design Professional, the Design Professional will certify that: 3.10.1 The plans, specifications, construction contract documents, and any and all other engineering, construction and contractual documents shall be developed in accordance with sound engineering and design principles, and with generally accepted professional standards. 3.10.2 The plans, specifications, construction contract documents, and any and all other engineering, construction and contractual documents shall be consistent with the intent of the Project as defined in the FDOT Public Transportation Grant Agreement. 3.10.3 A review of the certification requirements listed in Section B.2. of Exhibit E of the FDOT Public Transportation Grant Agreement and a determination as to their applicability to this Project is performed. 3.10.4 The plans shall comply with all applicable laws, ordinances, zoning and permitting requirements, public notice requirements, and other similar regulations. 3.11 The Design Professional will comply fully with all applicable federal, state, county, municipal and other governmental laws, executive orders, wage, hour and labor, equal employment opportunity, disadvantaged business enterprises, pollution control and environmental regulations, applicable national and local codes, Florida Department of Transportation (FDOT) Policies, Guidelines, Standards, Manual of Uniform Minimum Standards for Design, Construction and Maintenance for Streets and Highways (Commonly referred to as the “Florida Green Book”), Manual on Uniform Traffic Control Devices and requirements, FAA Advisory Circulars, and Owner’s Rules and Regulations. Any projects with FDOT funding require the Design Professional to comply with all applicable provisions of the FDOT Public Transportation Grant Agreement. The Design Professional will obtain all necessary permits, pay all required charges, fees and taxes and otherwise perform these services in a legal manner. In the event that any construction occurs on FDOT right of way, the Design Professional shall comply with all FDOT requirements contained in Exhibit C of the FDOT Public Transportation Grant Agreement. 3.12 When the Contractor considers that the whole work included in a construction contract, or a portion thereof designated in the contract documents for separate completion, is complete, the Contractor will notify the Owner and Design Professional in writing of the completion of the portion or the whole of the construction; and for all design work that originally required certification by a Professional Engineer, the Design Professional shall provide an Engineer’s Certification of Compliance, signed and sealed by a Professional Engineer, the form of which is attached to the FDOT Public Transportation Grant Agreement to the Owner and Contractor in a timely manner. The certification shall state that work has been completed in compliance with the Project construction plans and specifications. If any deviations are found from the approved plans or specifications, the certification shall include a list of all deviations along with an explanation that justifies the reason to accept each deviation.

SERVICES BY THE DESIGN PROFESSIONAL. ‌ 3.1 The services that the Design Professional will provide to the Owner under this Contract will be as follows, and in general accordance with the Owner’s Request request for Qualifications qualifications, except for scope provisions covering Work or Services performed under the Design-Builder's Part 1 Contract, dated April 6February 21, 20182014, entitled “Request for Qualifications for Runway 10-28 & Other Pavement Rehabilitation at Plant City Airport, Tampa, Florida”, the Design Professional’s response to the Owner’s Request for Qualifications dated May 18, 2018, entitled “Statement of Qualifications Runway 10-28 Checked Baggage System Upgrades and Other Pavement RehabilitationOptimization”, which are both incorporated herein by referenceis hereto as Exhibit 1, and the Design Professional’s Fee fee and Scope Proposal scope proposal dated September 25May 18, 20182017, entitled “HCAA Project No. 6620 19 Runway 10-28 Number 5991 14, Checked Baggage Upgrades and Other Pavement Rehabilitation Plant City AirportOptimization, Design Team Scope of Work” which is attached hereto as Attachment 1 and incorporated herein by reference. In the event of any conflicts between this Contract and any other documents, the precedence in resolving such conflicts will be as follows: 3.1.1 This Contract 3.1.2 Individual work order and Design Professional’s associated Fee fee and Scope Proposalscope proposal 3.1.3 The Owner’s Request request for Qualifications 3.1.4 Design Professional’s response to Request for Qualificationsqualifications 3.2 The Design Professional designates Xxxxxx XxxxxxxxxXxxx Xxxxxx, whose business address is 0000 Xxxxxxxxx Xxxx.000 Xxxxx Xxxxxxx Xxxxxx Xxxxxx, Xxxxx 000, Xxxxx, XX, XX 00000, and who is a qualified licensed professional, to serve as the project manager. The project manager will be authorized and responsible to act on behalf of the Design Professional with respect to directing, coordinating and administering all aspects of the services to be provided and performed under this Contract. The Design Professional designates Xxxxxx X. XxxxxxxxxXxxx Xxxxxx, whose title is President - CEOPrincipal, whose business address is 0000 Xxxxxxxxx Xxxx.000 Xxxxx Xxxxxxx Xxxxxx Xxxxxx, Xxxxx 000, Xxxxx, XX, XX 00000, to have full authority to bind and obligate the Design Professional on all matters arising out of or relating to this Contract. The Design Professional agrees that the project manager will devote whatever time is required to satisfactorily manage the services to be provided and performed by the Design Professional hereunder. Any replacement of the project manager will be subject to the prior approval and acceptance of the Owner. 3.3 The Design Professional agrees, within seven (7) days of receipt of a written request from the Owner, to promptly remove and replace the project manager, or any other personnel employed or retained by the Design Professional, or any subconsultants or subcontractors or any personnel of any such subconsultants or subcontractors engaged by the Design Professional to provide and perform services or work pursuant to the requirements of this Contract, whom the Owner will request in writing to be removed, which request may be made by the Owner with or without cause. 3.4 Basic Services under this Contract will include those in Attachment 1. The Design Professional shall, as a part of Basic Services, prepare all Instruments of Service, supply all personnel and otherwise perform all tasks reasonably inferable from this Contract to complete the Project in a timely manner consistent with the Project schedule and Owner’s programmatic requirements. 3.5 Additional Services under this Contract will, at the request of the Owner, include those in Attachment 2. Design Professional shall, as a part of Additional Services, prepare all Instruments of Service, supply all personnel and otherwise perform all tasks reasonably inferable from this Contract to complete the Additional services in a timely manner consistent with the Project schedule and Owner’s programmatic requirements. 3.6 Work Order Process - Work orders are intended to be discrete working documents that will provide, in summary form, the background and factual context within which a particular work element or series of work elements will be completed by the Design Professional. Each work order will include a scope of services, level of effort and related costs. Work orders will be construed to be in addition to, supplementary to, and consistent with the provisions of this Contract. Upon request by the Owner, the Design Professional will prepare and submit a work order to the Owner for review and approval. Work order forms will be provided by the Owner along with a detailed outline of design deliverables. Contracts involving multiple project numbers or airport locations will require work orders to identify basic services and reimbursement expense amounts per project and/or location. Design Professional shall, as a part of work order services, prepare all Instruments of service, supply all personnel and otherwise perform all tasks reasonably inferable from this Contract to complete the Project in a timely manner consistent with the Project schedule and the Owner’s programmatic requirements. The Design Professional will perform professional services provided for in each work order executed between the parties. Such professional services will be performed in accordance with the terms of this Contract. The Design Professional will be solely responsible for the technical completeness and accuracy of all work performed under this Contract. 3.7 Services outside of the scope of Basic Services, Additional Services and the Work Order Process shall be provided if and only if authorized by the Owner in writing in advance of the performance of such services. Before performing these services, the Design Professional shall submit to the Owner in writing information regarding the estimated cost of such services and the time estimated for completion of these services. The Design Professional waives any claim for compensation for additional services if such additional services were not authorized by the Owner in accordance with this paragraph. 3.8 In the event all bids or negotiated proposals received by the Owner exceed the Design Professional’s Engineer’s Construction Estimate for the Cost of the Work by at least 15% at the time bids or negotiated proposals are received, at the Owner’s option, the Design Professional may be tasked to revise the Construction Documents so that the Cost of the Work no longer exceeds the budget for the Project, as determined in the sole discretion of the Owner and supports the Owner during any re-procurement process. The Owner will negotiate the amount of payment, if any, for the services from the Design Professional related to the revisions to the Construction Documents prior to the Design Professional performing such services. 3.9 The Design Professional will comply with all Owner rules, regulations, policies, procedures and directives. 3.10 The Design Professional will comply with all laws including those related to professional regulations. The Design Professional will timely submit signed and sealed documents. 3.11 The Design Professional when on any construction site will require its employees to wear all appropriate personal protection equipment, including but not limited to, vest, hard hat, safety glasses and gloves.

SERVICES BY THE DESIGN PROFESSIONAL. ‌ 3.1 The services that the Design Professional will provide to the Owner under this Contract will be as follows, and in general accordance with the Owner’s Request for Qualifications dated April July 6, 20182016, entitled “Request for Qualifications for Runway 104-28 & 22 and Other Pavement Rehabilitation at Plant City Airport, Xxxxx X. Xxxxxx Airport Tampa, Florida”, the Design Professional’s response to the Owner’s Request for Qualifications dated May 18August 10, 20182016, entitled “Statement of Qualifications for Runway 104-28 22 and Other Pavement RehabilitationRehabilitation at Xxxxx X. Xxxxxx Airport – Tampa, Florida”, which are both incorporated herein by reference, and the Design Professional’s Fee and Scope Proposal dated September 25October 19, 20182016, entitled “Project No. 6620 19 Number 6310 17, Runway 104-28 22 and Other Pavement Rehabilitation Plant City Rehabilitation, Xxxxx X. Xxxxxx Airport” which is attached hereto as Attachment 1 and incorporated herein by reference. In the event of any conflicts between this Contract and any other documents, the precedence in resolving such conflicts will be as follows: 3.1.1 This Contract 3.1.2 Individual work order and Design Professional’s associated Fee and Scope Proposal 3.1.3 The Owner’s Request for Qualifications 3.1.4 Design Professional’s response to Request for Qualifications 3.2 The Design Professional designates Xxxxxx Xxxxxxxxx, Ph.D., P.E., whose business address is 0000 Xxxxxxxxx Xxxx., Xxxxx 000, Xxxxx, XX, 00000, and who is a qualified licensed professional, to serve as the project manager. The project manager will be authorized and responsible to act on behalf of the Design Professional with respect to directing, coordinating and administering all aspects of the services to be provided and performed under this Contract. The Design Professional designates Xxxxxx X. Xxxxxxxxx, whose title is President - CEO, whose business address is 0000 Xxxxxxxxx Xxxx., Xxxxx 000, Xxxxx, XX, 00000, to have full authority to bind and obligate the Design Professional on all matters arising out of or relating to this Contract. The Design Professional agrees that the project manager will devote whatever time is required to satisfactorily manage the services to be provided and performed by the Design Professional hereunder. Any replacement of the project manager will be subject to the prior approval and acceptance of the Owner. 3.3 The Design Professional agrees, within seven (7) days of receipt of a written request from the Owner, to promptly remove and replace the project manager, or any other personnel employed or retained by the Design Professional, or any subconsultants or subcontractors or any personnel of any such subconsultants or subcontractors engaged by the Design Professional to provide and perform services or work pursuant to the requirements of this Contract, whom the Owner will request in writing to be removed, which request may be made by the Owner with or without cause. 3.4 Basic Services under this Contract will include those in Attachment 1. The Design Professional shall, as a part of Basic Services, prepare all Instruments of Service, supply all personnel and otherwise perform all tasks reasonably inferable from this Contract to complete the Project in a timely manner consistent with the Project schedule and Owner’s programmatic requirements. 3.5 Additional Services under this Contract will, at the request of the Owner, include those in Attachment 1. Design Professional shall, as a part of Additional Services, prepare all Instruments of Service, supply all personnel and otherwise perform all tasks reasonably inferable from this Contract to complete the Additional services in a timely manner consistent with the Project schedule and Owner’s programmatic requirements. 3.6 Work Order Process - Work orders are intended to be discrete working documents that will provide, in summary form, the background and factual context within which a particular work element or series of work elements will be completed by the Design Professional. Each work order will include a scope of services, level of effort and related costs. Work orders will be construed to be in addition to, supplementary to, and consistent with the provisions of this Contract. Upon request by the Owner, the Design Professional will prepare and submit a work order to the Owner for review and approval. Work order forms will be provided by the Owner along with a detailed outline of design deliverables. Contracts involving multiple project numbers or airport locations will require work orders to identify basic services and reimbursement expense amounts per project and/or location. Design Professional shall, as a part of work order services, prepare all Instruments of service, supply all personnel and otherwise perform all tasks reasonably inferable from this Contract to complete the Project in a timely manner consistent with the Project schedule and the Owner’s programmatic requirements. The Design Professional will perform professional services provided for in each work order executed between the parties. Such professional services will be performed in accordance with the terms of this Contract. The Design Professional will be solely responsible for the technical completeness and accuracy of all work performed under this Contract. 3.7 Services outside of the scope of Basic Services, Additional Services and the Work Order Process shall be provided if and only if authorized by the Owner in writing in advance of the performance of such services. Before performing these services, the Design Professional shall submit to the Owner in writing information regarding the estimated cost of such services and the time estimated for completion of these services. The Design Professional waives any claim for compensation for additional services if such additional services were not authorized by the Owner in accordance with this paragraph. 3.8 In the event all bids or negotiated proposals received by the Owner exceed the Design Professional’s Engineer’s Construction Estimate for the Cost of the Work by at least 15% at the time bids or negotiated proposals are received, at the Owner’s option, the Design Professional may be tasked to revise the Construction Documents so that the Cost of the Work no longer exceeds the budget for the Project, as determined in the sole discretion of the Owner and supports the Owner during any re-procurement process. The Owner will negotiate the amount of payment, if any, for the services from the Design Professional related to the revisions to the Construction Documents prior to the Design Professional performing such services. 3.9 The Design Professional will comply with all Owner Rules, Regulations, Policies, Standard Procedures and Operating Directives. 3.10 The Design Professional will comply with all laws including those related to professional regulations. The Design Professional will timely submit signed and sealed documents. 3.11 The Design Professional when on any construction site will require its employees to wear all appropriate personal protection equipment, including but not limited to, vest, hard hat, safety glasses and gloves.

SERVICES BY THE DESIGN PROFESSIONAL. ‌ 3.1 The services that the Design Professional will provide to the Owner under this Contract will be as follows, and in general accordance with the Owner’s Request for Qualifications dated April 6February 7, 2018, entitled “Request for Qualifications for Runway 10-28 & Other Pavement Rehabilitation Aircraft Visual Docking Guidance System at Plant City Tampa International Airport, Tampa, Florida”, the Design Professional’s response to the Owner’s Request for Qualifications dated May 18March 21, 2018, entitled “Statement of Qualifications Runway 10-28 and Other Pavement RehabilitationAircraft Visual Docking Guidance System, Tampa International Airport, HCAA Project No. 6400 18”, which are both incorporated herein by reference, and the Design Professional’s Fee and Scope Proposal dated September 25July 19, 2018, entitled “Aircraft Visual Docking Guidance System, HCAA Project No. 6620 19 Runway 10-28 6400 18, Draft Fee and Other Pavement Rehabilitation Plant City AirportScope Proposal – Revision 2” which is attached hereto as Attachment 1 and incorporated herein by reference. In the event of any conflicts between this Contract and any other documents, the precedence in resolving such conflicts will be as follows: 3.1.1 This Contract 3.1.2 Individual work order and Design Professional’s associated Fee and Scope Proposal 3.1.3 The Owner’s Request for Qualifications 3.1.4 Design Professional’s response to Request for Qualifications 3.2 Design Professional designates Xxxxxx XxxxxxxxxXxxxx Xxxx, PE, whose business address is 0000 Xxxxxxxxx Xxxx.00000 Xxxxx Xxxx Xxxxxxxxx, Xxxxx 000, Xxxxx, XX, 00000, and who is a qualified licensed professional, to serve as the project manager. The project manager will be authorized and responsible to act on behalf of the Design Professional with respect to directing, coordinating and administering all aspects of the services to be provided and performed under this Contract. Design Professional designates Xxxxxx Xxxxxxx X. XxxxxxxxxXxxxxx, PE, whose title is President - CEOVice President, whose business address is 0000 Xxxxxxxxx Xxxx.000 Xxxxxxxx Xxxxxx, Xxxxx 000, XxxxxXxxxx Xxxxxx, XX, 00000, to have full authority to bind and obligate the Design Professional on all matters arising out of or relating to this Contract. The Design Professional agrees that the project manager will devote whatever time is required to satisfactorily manage the services to be provided and performed by the Design Professional hereunder. Any replacement of the project manager will be subject to the prior approval and acceptance of the Owner.

SERVICES BY THE DESIGN PROFESSIONAL. ‌ 3.1 The services that the Design Professional will provide to the Owner under this Contract will be as follows, and in general accordance with the Owner’s Request for Qualifications dated April 6August 16, 20182017, entitled “Request for Qualifications for Runway 10-28 & Other Pavement Rehabilitation North Air Cargo Apron Expansion, Taxiway A and MRO Taxilane Extension at Plant City Tampa International Airport, Tampa, Florida”, the Design Professional’s response to the Owner’s Request for Qualifications dated May 18October 4, 20182017, entitled “Statement of Qualifications Runway 10Qualifications, Tampa International Airport, North Air Cargo Apron Expansion, Taxiway A and MRO Taxilane Extension, Solicitation#: 00-28 and Other Pavement Rehabilitation000-000”, which are both incorporated herein by reference, and the Design Professional’s Fee and Scope Proposal dated September 25January 22, 2018, entitled “Project No. 6620 19 Runway 10-28 AECOM Scope and Other Pavement Rehabilitation Plant City Fee Proposal, 8220 18 – Taxilane Extension & Site Preparation for Eastside MRO Development, 8825 18 – New Taxiway A and Bridge, Tampa International Airport” which is attached hereto as Attachment 1 and incorporated herein by reference. In the event of any conflicts between this Contract and any other documents, the precedence in resolving such conflicts will be as follows: 3.1.1 This Contract 3.1.2 Individual work order and Design Professional’s associated Fee and Scope Proposal 3.1.3 The Owner’s Request for Qualifications 3.1.4 Design Professional’s response to Request for Qualifications 3.2 Design Professional designates Xxxxxx XxxxxxxxxXxxxx, whose business address is 0000 Xxxxxxxxx Xxxx.X. Xxxxxxxx Xxxxxxxx Causeway , Xxxxx 000Tampa, Xxxxx, XX, 00000Florida 33607-1462, and who is a qualified licensed professional, to serve as the project manager. The project manager will be authorized and responsible to act on behalf of the Design Professional with respect to directing, coordinating and administering all aspects of the services to be provided and performed under this Contract. Design Professional designates Xxxxxx X. Xxxxxxxxx, whose title is President - CEOVice President-Florida Aviation Group, whose business address is 0000 Xxxxxxxxx Xxxx.7650 W. Xxxxxxxx Xxxxxxxx Causeway , Xxxxx 000Tampa, Xxxxx, XX, 00000Florida 33607- 1462, to have full authority to bind and obligate the Design Professional on all matters arising out of or relating to this Contract. The Design Professional agrees that the project manager will devote whatever time is required to satisfactorily manage the services to be provided and performed by the Design Professional hereunder. Any replacement of the project manager will be subject to the prior approval and acceptance of the Owner.