Signaling Links Sample Clauses

Signaling Links. The SPOI for each link shall be located at a cross-connect element, such as a DSX-1, in the central office where the Telco STP is located. There shall be a DS1 or higher rate transport interface at each of the SPOIs. Each Signaling Link shall appear as a DS0 channel within the DS1 or higher rate interface. Telco may offer higher rate DS1 Signaling Links for interconnecting Carrier local switching systems or STPs with Carrier STPs once these become approved ANSI standards and are available capabilities of Telco STPs.
Sample 1
AutoNDA by SimpleDocs
Signaling Links. Signaling link pairs in a combined link set will be operated in a load share mode, with no single signaling link operated at greater than 30% of its theoretical message capacity under normal conditions and 60% under overload conditions.
Sample 1
Signaling Links. 1.2.1 Dedicated Signaling Links provide physical access to NEVADA's signaling network. The links are fully dedicated to the use of CLEC and provide the screening and routing usage for NEVADA's STP to which the link is connected. Signaling Links are provided as a set of links connecting to NEVADA's mated pair of STPs. Signaling Links are dedicated two-way digital data circuits that interconnect NEVADA's STP locations and CLEC's signaling points at Signaling Point of Interface ("SPOI") locations. Signaling links are available to CLECs for their use in furnishing SS7-based services or applications to their End Users or other users of SS7 signaling information. 1.2.2 Signaling links must include the following elements:
Sample 1
Signaling Links. 3.2.1 CLEC shall provide the signaling points and signaling point codes associated with CLEC. CLEC shall provide information to NEVADA to allow NEVADA to translate NEVADA STPs. The 308 information shall define the screening and routing information for the signaling point codes of CLEC. This information may include global title address, translation type and subsystem designations as needed. 3.2.2 NEVADA mated pairs of STPs shall connect to CLEC premises (including collocation locations) within the same LATA. A set of links can be either:
Sample 1
Signaling Links. 6 -----------------------------------------------------------------------
Sample 1
Signaling Links. 3.2.1 Pac-West shall provide the signaling points and signaling point codes associated with Pac-West. Pac-West shall provide information to PACIFIC to allow PACIFIC to translate PACIFIC STPs. The information shall define the screening and routing information for the signaling point codes of Pac-West. This information may include global title address, translation type and subsystem designations as needed. 3.2.2 PACIFIC mated pairs of STPs shall connect to Pac-West premises (including collocation locations) within the same LATA. A set of links can be either: (a) A" Link Sets from Pac-West's Signaling Point ("SP")/Service Switching Point ("SSP"). A minimum of two links will be required, one from the SP/SSP to each STP; or, (b) B/D" Link Sets from STPs that are connected to PACIFIC's mated pair of STPs. A minimum of four links will be required (i.e., a "quad") between the two pairs of STPs. When Pac-West provides its own channelized facility, an STP Port and Cross Connect is required for each 56 kbps access link utilized for the Service. STP locations are set forth in the National Exchange Carrier Association, Inc. ("NECA") Tariff FCC No. 4.
Sample 1
Signaling Links. 1.2.1 Dedicated Signaling Links provide physical access to PACIFIC's signaling network. The links are fully dedicated to the use of Pac-West and provide the screening and routing usage for PACIFIC's STP to which the link is connected. Signaling Links are provided as a set of links connecting to PACIFIC's mated pair of STPs. Signaling Links are dedicated two-way digital data circuits that interconnect PACIFIC's STP locations and Pac-West's signaling points at Signaling Point of Interface ("SPOI") locations. Signaling links are available to CLECs for their use in furnishing SS7-based services or applications to their End Users or other users of SS7 signaling information. 1.2.2 Signaling links must include the following elements:
Sample 1
AutoNDA by SimpleDocs

Related to Signaling Links

  • Signaling Each Party will provide the other Party with access to its databases and associated signaling necessary for the routing and completion of the other Party’s traffic in accordance with the provisions contained in the Unbundled Network Element Attachment or applicable access tariff.

  • Signaling Link Transport 9.2.1 Signaling Link Transport is a set of two or four dedicated 56 kbps transmission paths between Global Connection-designated Signaling Points of Interconnection that provide appropriate physical diversity.

  • Links If The Services are made available through the Internet, the Financial Institution’s website may provide links to other websites, including those of Third Parties who may also provide services to You. You acknowledge that all those other websites and Third Party services are independent from the Financial Institution’s and may be subject to separate agreements that govern their use. The Financial Institution and Central 1 have no liability for those other websites or their contents or the use of Third Party services. Links are provided for convenience only, and You assume all risk resulting from accessing or using such other websites or Third Party services.

  • Switching All of the negotiated rates, terms and conditions set forth in this Section pertain to the provision of local and tandem switching.

  • Deactivation Computershare applications shall automatically deactivate a User ID after a specified number of unsuccessful log-in attempts. Sessions must be restricted or timed out after a defined period of inactivity and require Users to re-authenticate. User IDs for Computershare Personnel with access to Customer Confidential Information shall be deactivated immediately upon changes in job responsibilities that render such access unnecessary, or upon termination of employment.

  • Network Access During its performance of this Contract, Contractor may be granted access to Purchaser’s computer and telecommunication networks (“Networks”). As a condition of Network use, Contractor shall: (a) use the Networks in compliance with all applicable laws, rules, and regulations; (b) use software, protocols, and procedures as directed by Purchaser to access and use the Networks; (c) only access Network locations made available to Contractor by Purchaser; (d) not interfere with or disrupt other users of the Networks;

  • Signaling protocol 4.1.3.1 SS7 Signaling is AT&T-21STATE’s preferred method for signaling. Where MF signaling is currently used, the Parties agree to use their best efforts to convert to SS7. If SS7 services are provided by AT&T-21STATE, they will be provided in accordance with the provisions of the applicable access tariffs. 4.1.3.2 Where MF signaling is currently used, the Parties agree to interconnect their networks using MF or dual tone MF (DTMF) signaling, subject to availability at the End Office Switch or Tandem Switch at which Interconnection occurs. The Parties acknowledge that the use of MF signaling may not be optimal. AT&T-21STATE will not be responsible for correcting any undesirable characteristics, service problems or performance problems that are associated with MF/SS7 inter-working or the signaling protocol required for Interconnection with CLEC employing MF signaling.

  • Access Toll Connecting Trunk Group Architecture 9.2.1 If ECI chooses to subtend a Verizon access Tandem, ECI’s NPA/NXX must be assigned by ECI to subtend the same Verizon access Tandem that a Verizon NPA/NXX serving the same Rate Center Area subtends as identified in the LERG. 9.2.2 ECI shall establish Access Toll Connecting Trunks pursuant to applicable access Tariffs by which it will provide Switched Exchange Access Services to Interexchange Carriers to enable such Interexchange Carriers to originate and terminate traffic to and from ECI’s Customers. 9.2.3 The Access Toll Connecting Trunks shall be two-way trunks. Such trunks shall connect the End Office ECI utilizes to provide Telephone Exchange Service and Switched Exchange Access to its Customers in a given LATA to the access Tandem(s) Verizon utilizes to provide Exchange Access in such LATA. 9.2.4 Access Toll Connecting Trunks shall be used solely for the transmission and routing of Exchange Access to allow ECI’s Customers to connect to or be connected to the interexchange trunks of any Interexchange Carrier which is connected to a Verizon access Tandem.

  • Unbundled Channelization (Multiplexing) 5.7.1 To the extent NewPhone is purchasing DS1 or DS3 or STS-1 Dedicated Transport pursuant to this Agreement, Unbundled Channelization (UC) provides the optional multiplexing capability that will allow a DS1 (1.544 Mbps) or DS3 (44.736 Mbps) or STS-1 (51.84 Mbps) Network Elements to be multiplexed or channelized at a BellSouth central office. Channelization can be accomplished through the use of a multiplexer or a digital cross-connect system at the discretion of BellSouth. Once UC has been installed, NewPhone may request channel activation on a channelized facility and BellSouth shall connect the requested facilities via COCIs. The COCI must be compatible with the lower capacity facility and ordered with the lower capacity facility. This service is available as defined in NECA 4. 5.7.2 BellSouth shall make available the following channelization systems and interfaces: 5.7.2.1 DS1 Channelization System: channelizes a DS1 signal into a maximum of twenty- four (24)

  • Reactivation To reactivate suspended Service, you must bring your account current through the month of reactivation by making payment in full of any outstanding balance, fees and other applicable charges. In addition, we may require a deposit before reactivating your Service. The amount of the deposit will not exceed one year of monthly fees. Any amounts deposited by you will appear on your statement as a credit, and service charges and other fees will be invoiced as described above. If you fail to pay any amount on a subsequent xxxx, the unpaid amount will be deducted each billing cycle from the credit amount. Credit amounts will not earn or accrue interest.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!