Common use of Special and Differential Treatment of Developing Country Members Clause in Contracts

Special and Differential Treatment of Developing Country Members. 12.1 Members shall provide differential and more favourable treatment to developing country Members to this Agreement, through the following provisions as well as through the relevant provisions of other Articles of this Agreement. 12.2 Members shall give particular attention to the provisions of this Agreement concerning developing country Members' rights and obligations and shall take into account the special development, financial and trade needs of developing country Members in the implementation of this Agreement, both nationally and in the operation of this Agreement's institutional arrangements. 12.3 Members shall, in the preparation and application of technical regulations, standards and conformity assessment procedures, take account of the special development, financial and trade needs of developing country Members, with a view to ensuring that such technical regulations, standards and conformity assessment procedures do not create unnecessary obstacles to exports from developing country Members. 12.4 Members recognize that, although international standards, guides or recommendations may exist, in their particular technological and socio-economic conditions, developing country Members adopt certain technical regulations, standards or conformity assessment procedures aimed at preserving indigenous technology and production methods and processes compatible with their development needs. Members therefore recognize that developing country Members should not be expected to use international standards as a basis for their technical regulations or standards, including test methods, which are not appropriate to their development, financial and trade needs. 12.5 Members shall take such reasonable measures as may be available to them to ensure that international standardizing bodies and international systems for conformity assessment are organized and operated in a way which facilitates active and representative participation of relevant bodies in all Members, taking into account the special problems of developing country Members. 12.6 Members shall take such reasonable measures as may be available to them to ensure that international standardizing bodies, upon request of developing country Members, examine the possibility of, and, if practicable, prepare international standards concerning products of special interest to developing country Members. 12.7 Members shall, in accordance with the provisions of Article 11, provide technical assistance to developing country Members to ensure that the preparation and application of technical regulations, standards and conformity assessment procedures do not create unnecessary obstacles to the expansion and diversification of exports from developing country Members. In determining the terms and conditions of the technical assistance, account shall be taken of the stage of development of the requesting Members and in particular of the least-developed country Members. 12.8 It is recognized that developing country Members may face special problems, including institutional and infrastructural problems, in the field of preparation and application of technical regulations, standards and conformity assessment procedures. It is further recognized that the special development and trade needs of developing country Members, as well as their stage of technological development, may hinder their ability to discharge fully their obligations under this Agreement. Members, therefore, shall take this fact fully into account. Accordingly, with a view to ensuring that developing country Members are able to comply with this Agreement, the Committee on Technical Barriers to Trade provided for in Article 13 (referred to in this Agreement as the "Committee") is enabled to grant, upon request, specified, time-limited exceptions in whole or in part from obligations under this Agreement. When considering such requests the Committee shall take into account the special problems, in the field of preparation and application of technical regulations, standards and conformity assessment procedures, and the special development and trade needs of the developing country Member, as well as its stage of technological development, which may hinder its ability to discharge fully its obligations under this Agreement. The Committee shall, in particular, take into account the special problems of the least-developed country Members.

Special and Differential Treatment of Developing Country Members. ‌ 12.1 Members shall provide differential and more favourable treatment to developing country Members to this Agreement, through the following provisions as well as through the relevant provisions of other Articles of this Agreement. 12.2 Members shall give particular attention to the provisions of this Agreement concerning developing country Members' rights and obligations and shall take into account the special development, financial and trade needs of developing country Members in the implementation of this Agreement, both nationally and in the operation of this Agreement's institutional arrangements. 12.3 Members shall, in the preparation and application of technical regulations, standards and conformity assessment procedures, take account of the special development, financial and trade needs of developing country Members, with a view to ensuring that such technical regulations, standards and conformity assessment procedures do not create unnecessary obstacles to exports from developing country Members. 12.4 Members recognize that, although international standards, guides or recommendations may exist, in their particular technological and socio-economic conditions, developing country Members adopt certain technical regulations, standards or conformity assessment procedures aimed at preserving indigenous technology and production methods and processes compatible with their development needs. Members therefore recognize that developing country Members should not be expected to use international standards as a basis for their technical regulations or standards, including test methods, which are not appropriate to their development, financial and trade needs. 12.5 Members shall take such reasonable measures as may be available to them to ensure that international standardizing bodies and international systems for conformity assessment are organized and operated in a way which facilitates active and representative participation of relevant bodies in all Members, taking into account the special problems of developing country Members. 12.6 Members shall take such reasonable measures as may be available to them to ensure that international standardizing bodies, upon request of developing country Members, examine the possibility of, and, if practicable, prepare international standards concerning products of special interest to developing country Members. 12.7 Members shall, in accordance with the provisions of Article 11, provide technical assistance to developing country Members to ensure that the preparation and application of technical regulations, standards and conformity assessment procedures do not create unnecessary obstacles to the expansion and diversification of exports from developing country Members. In determining the terms and conditions of the technical assistance, account shall be taken of the stage of development of the requesting Members and in particular of the least-developed country Members. 12.8 It is recognized that developing country Members may face special problems, including institutional and infrastructural problems, in the field of preparation and application of technical regulations, standards and conformity assessment procedures. It is further recognized that the special development and trade needs of developing country Members, as well as their stage of technological development, may hinder their ability to discharge fully their obligations under this Agreement. Members, therefore, shall take this fact fully into account. Accordingly, with a view to ensuring that developing country Members are able to comply with this Agreement, the Committee on Technical Barriers to Trade provided for in Article 13 (referred to in this Agreement as the "Committee") is enabled to grant, upon request, specified, time-limited exceptions in whole or in part from obligations under this Agreement. When considering such requests the Committee shall take into account the special problems, in the field of preparation and application of technical regulations, standards and conformity assessment procedures, and the special development and trade needs of the developing country Member, as well as its stage of technological development, which may hinder its ability to discharge fully its obligations under this Agreement. The Committee shall, in particular, take into account the special problems of the least-developed country Members.

Special and Differential Treatment of Developing Country Members. 12.1 Members shall provide differential and more favourable treatment to developing country Members to this Agreement, through the following provisions as well as through the relevant provisions of other Articles of this Agreement. 12.2 Members shall give particular attention to the provisions of this Agreement concerning developing country Members' rights and obligations and shall take into account the special development, financial and trade needs of developing country Members in the implementation of this Agreement, both nationally and in the operation of this Agreement's institutional arrangements. 12.3 Members shall, in the preparation and application of technical regulations, standards and conformity assessment procedures, take account of the special development, financial and trade needs of developing country Members, with a view to ensuring that such technical regulations, standards and conformity assessment procedures do not create unnecessary obstacles to exports from developing country Members. 12.4 Members recognize that, although international standards, guides or recommendations may exist, in their particular technological and socio-economic conditions, developing country Members adopt certain technical regulations, standards or conformity assessment procedures aimed at preserving indigenous technology and production methods and processes compatible with their development needs. Members therefore recognize that developing country Members should not be expected to use international standards as a basis for their technical regulations or standards, including test methods, which are not appropriate to their development, financial and trade needs. 12.5 Members shall take such reasonable measures as may be available to them to ensure that international standardizing bodies and international systems for conformity assessment are organized and operated in a way which facilitates active and representative participation of relevant bodies in all Members, taking into account the special problems of developing country Members. 12.6 Members shall take such reasonable measures as may be available to them to ensure that international standardizing bodies, upon request of developing country Members, examine the possibility of, and, if practicable, prepare international standards concerning products of special interest to developing country Members. 12.7 Members shall, in accordance with the provisions of Article 11, provide technical assistance to developing country Members to ensure that the preparation and application of technical regulations, standards and conformity assessment procedures do not create unnecessary obstacles to the expansion and diversification of exports from developing country Members. In determining the terms and conditions of the technical assistance, account shall be taken of the stage of development of the requesting Members and in particular of the least-least- developed country Members. 12.8 It is recognized that developing country Members may face special problems, including institutional and infrastructural problems, in the field of preparation and application of technical regulations, standards and conformity assessment procedures. It is further recognized that the special development and trade needs of developing country Members, as well as their stage of technological development, may hinder their ability to discharge fully their obligations under this Agreement. Members, therefore, shall take this fact fully into account. Accordingly, with a view to ensuring that developing country Members are able to comply with this Agreement, the Committee on Technical Barriers to Trade provided for in Article 13 (referred to in this Agreement as the "Committee") is enabled to grant, upon request, specified, time-limited exceptions in whole or in part from obligations under this Agreement. When considering such requests the Committee shall take into account the special problems, in the field of preparation and application of technical regulations, standards and conformity assessment procedures, and the special development and trade needs of the developing country Member, as well as its stage of technological development, which may hinder its ability to discharge fully its obligations under this Agreement. The Committee shall, in particular, take into account the special problems of the least-developed country Members.

Special and Differential Treatment of Developing Country Members. 12.1 Members shall provide differential and more favourable treatment to developing country Members to this Agreement, through the following provisions as well as through the relevant provisions of other Articles of this Agreement. 12.2 Members shall give particular attention to the provisions of this Agreement concerning developing country Members' rights and obligations and shall take into account the special development, financial and trade needs of developing country Members in the implementation of this Agreement, both nationally and in the operation of this Agreement's institutional arrangements. 12.3 Members shall, in the preparation and application of technical regulations, standards and conformity assessment procedures, take account of the special development, financial and trade needs of developing country Members, with a view to ensuring that such technical regulations, standards and conformity assessment procedures do not create unnecessary obstacles to exports from developing country Members. 12.4 Members recognize that, although international standards, guides or recommendations may exist, in their particular technological and socio-economic conditions, developing country Members adopt certain technical regulations, standards or conformity assessment procedures aimed at preserving indigenous technology and production methods and processes compatible with their development needs. Members therefore recognize that developing country Members should not be expected to use international standards as a basis for their technical regulations or standards, including test methods, which are not appropriate to their development, financial and trade needs. 12.5 Members shall take such reasonable measures as may be available to them to ensure that international standardizing bodies and international systems for conformity assessment are organized and operated in a way which facilitates active and representative participation of relevant bodies in all Members, taking into account the special problems of developing country Members. 12.6 Members shall take such reasonable measures as may be available to them to ensure that international standardizing bodies, upon request of developing country Members, examine the possibility of, and, if practicable, prepare international standards concerning products of special interest to developing country Members. 12.7 Members shall, in accordance with the provisions of Article 11, provide technical assistance to developing country Members to ensure that the preparation and application of technical regulations, standards and conformity assessment procedures do not create unnecessary obstacles to the expansion and diversification of exports from developing country Members. In determining the terms and conditions of the technical assistance, account shall be taken of the stage of development of the requesting Members and in particular of the least-developed country Members. 12.8 It is recognized that developing country Members may face special problems, including institutional and infrastructural problems, in the field of preparation and application of technical regulations, standards and conformity assessment procedures. It is further recognized that the special development and trade needs of developing country Members, as well as their stage of technological development, may hinder their ability to discharge fully their obligations under this Agreement. Members, therefore, shall take this fact fully into account. Accordingly, with a view to ensuring that developing country Members are able to comply with this Agreement, the Committee on Technical Barriers to Trade provided for in Article 13 (referred to in this Agreement as the "Committee") is enabled to grant, upon request, specified, time-limited exceptions in whole or in part from obligations under this Agreement. When considering such requests the Committee shall take into account the special problems, in the field of preparation and application of technical regulations, standards and conformity assessment procedures, and the special development and trade needs of the developing country Member, as well as its stage of technological development, which may hinder its ability to discharge fully its obligations under this Agreement. The Committee shall, in particular, take into account the special problems of the least-developed country Members.

Special and Differential Treatment of Developing Country Members. 12.1 Members shall provide differential and more favourable treatment to developing devel-oping country Members to this Agreement, through the following provisions as well as through the relevant provisions of other Articles of this Agreement. 12.2 Members shall give particular attention to the provisions of this Agreement concerning developing country Members' rights and obligations and shall take into account the special development, financial and trade needs of developing country Members in the implementation of this Agreement, both nationally and in the operation oper-ation of this Agreement's institutional arrangements. 12.3 Members shall, in the preparation and application of technical regulations, standards and conformity assessment procedures, take account of the special development, financial and trade needs of developing country Members, with a view to ensuring that such technical regulations, standards and conformity assessment procedures pro-cedures do not create unnecessary obstacles to exports from developing country Members. 12.4 Members recognize that, although international standards, guides or recommendations recom-mendations may exist, in their particular technological and socio-economic conditionscondi-tions, developing country Members adopt certain technical regulations, standards or conformity assessment procedures aimed at preserving indigenous technology and production methods and processes compatible with their development needs. Members Mem-bers therefore recognize that developing country Members should not be expected to use international standards as a basis for their technical regulations or standards, including test methods, which are not appropriate to their development, financial and trade needs. 12.5 Members shall take such reasonable measures as may be available to them to ensure that international standardizing bodies and international systems for conformity conform-ity assessment are organized and operated in a way which facilitates active and representative participation of relevant bodies in all Members, taking into account the special problems of developing country Members. 12.6 Members shall take such reasonable measures as may be available to them to ensure that international standardizing bodies, upon request of developing country Members, examine the possibility of, and, if practicable, prepare international standards xxxx-dards concerning products of special interest to developing country Members. 12.7 Members shall, in accordance with the provisions of Article 11, provide technical assistance to developing country Members to ensure that the preparation and application of technical regulations, standards and conformity assessment procedures pro-cedures do not create unnecessary obstacles to the expansion and diversification of exports from developing country Members. In determining the terms and conditions of the technical assistance, account shall be taken of the stage of development of the requesting Members and in particular of the least-developed country Members. 12.8 It is recognized that developing country Members may face special problems, including institutional and infrastructural problems, in the field of preparation and application of technical regulations, standards and conformity assessment procedurespro-cedures. It is further recognized that the special development and trade needs of developing country Members, as well as their stage of technological development, may hinder their ability to discharge fully their obligations under this Agreement. Members, therefore, shall take this fact fully into account. Accordingly, with a view to ensuring that developing country Members are able to comply with this AgreementAgree-ment, the Committee on Technical Barriers to Trade provided for in Article 13 (referred to in this Agreement as the "Committee") is enabled to grant, upon request, specified, time-limited exceptions in whole or in part from obligations under this Agreement. When considering such requests the Committee shall take into account the special problems, in the field of preparation and application of technical regulationsregula-tions, standards and conformity assessment procedures, and the special development and trade needs of the developing country Member, as well as its stage of technological development, which may hinder its ability to discharge fully its obligations under this Agreement. The Committee shall, in particular, take into account the special problems of the least-developed country Members.

Special and Differential Treatment of Developing Country Members. 12.1 Members shall provide differential and more favourable treatment to developing country Members to this Agreement, through the following provisions as well as through the relevant provisions of other Articles of this Agreement. 12.2 Members shall give particular attention to the provisions of this Agreement concerning developing country Members' rights and obligations and shall take into account the special development, financial and trade needs of developing country Members in the implementation of this Agreement, both nationally and in the operation of this Agreement's ' s institutional arrangements. 12.3 Members shall, in the preparation and application of technical regulations, standards and conformity assessment procedures, take account of the special development, financial and trade needs of developing country Members, with a view to ensuring that such technical regulations, standards and conformity assessment procedures do not create unnecessary obstacles to exports from developing country Members. 12.4 Members recognize that, although international standards, guides or recommendations may exist, in their particular technological and socio-economic conditions, developing country Members adopt certain technical regulations, standards or conformity assessment procedures aimed at preserving indigenous technology indigenoustechnology and production methods and processes compatible with their development needs. Members therefore recognize that developing country Members should not be expected to use international standards as a basis for their technical regulations or standards, including test methods, which are not appropriate to their development, financial and trade needs. 12.5 Members shall take such reasonable measures as may be available to them to ensure that international standardizing bodies and international systems for conformity assessment are organized and operated in a way which facilitates active and representative participation of relevant bodies in all Members, taking into account the special problems of developing country Members. 12.6 Members shall take such reasonable measures as may be available to them to ensure that international standardizing bodies, upon request of developing country Members, examine the possibility of, and, if practicable, prepare international standards concerning products of special interest to developing country Members. 12.7 Members shall, in accordance with the provisions of Article 11, provide technical assistance to developing country Members to ensure that the preparation and application of technical regulations, standards and conformity assessment procedures do not create unnecessary obstacles to the expansion and diversification of exports from developing country Members. In determining the terms and conditions of the technical thetechnical assistance, account shall be taken of takenof the stage of development of the requesting Members and in particular of the least-developed country Members. 12.8 It is recognized that developing country Members may face special problems, including institutional and infrastructural problems, in the field of preparation and application of technical regulations, standards and conformity assessment procedures. It is further recognized that the special development and trade needs of developing country Members, as well as their stage of technological development, may hinder their ability to discharge fully their obligations under this Agreement. Members, therefore, shall take this fact fully into account. Accordingly, with a view to ensuring that developing country Members are able to comply with this Agreement, the Committee on Technical Barriers to Trade provided for in Article 13 (referred to in this Agreement as the "Committee") is enabled to grant, upon request, specified, time-limited exceptions in whole or in part from obligations under this Agreement. When considering such requests suchrequests the Committee shall take into account the special problems, in the field of preparation and application of technical regulations, standards and conformity assessment procedures, and the special development and trade needs of the developing country Member, as well as its stage of technological development, which may hinder its ability to discharge fully its obligations under this Agreement. The Committee shall, in particular, take into account the special problems of the least-developed country Members.