Third Party Suppliers If Licensee wishes to obtain the Compound, Product and/or Licensed Product from a Third Party source, Licensee shall notify Pfizer through MPP of the intended source prior to making any commitments to purchase the Compound, Product and/or Licensed Product. Pfizer will determine at its sole discretion whether and on what terms to grant a license to the intended source to produce the Compound, Product and/or Licensed Product or inform Licensee whether such license already exists.
STUDENT SUPPORT SERVICES The Parties will identify and collaborate on measures to assist those students who may not be performing satisfactorily to succeed. The School will seek guidance from the College designee(s) in the areas of test preparation, tutoring, College Connection services, academic advising, and the development of an integrated support system for Students across the two institutions. Students will have access to the same or similar tutoring and other academic support as provided for other students in the School District, School and College. To promote academic success, the Parties will provide academic support services as may be needed. The School counselor and its designee will work to ensure Students receive pertinent information regarding higher education, financial assistance, and assistance waivers for tuition and fees. As needed, each Party will assist families as they complete initial application and admission requirements per the respective organizations’ processes. The School District will be responsible for non-academic counseling services and the College is authorized, but not required, to provide emergency counseling intervention services. See section 4 – Disability Support Services.
Significant Customers and Suppliers No customer or supplier which was significant to the Company during the period covered by the Financial Statements or which has been significant to the Company thereafter, has terminated or breached, materially reduced or threatened to terminate, breach or materially reduce its purchases from or provision of products or services to the Company, as the case may be.
Product Supply 5.1 In the event that Eisai notifies Radius of its desire to purchase bulk substance of Compound from Radius, Radius shall supply Eisai with all amount of such bulk substance of Compound, which meets specifications for the Product determined by Radius in the course of its Development activities pursuant to this Agreement, required by Eisai for commercial sales of Product in Japan With respect to Eisai clinical development activities for Product in Japan, upon Eisai’s request, Radius shall supply Eisai the bulk substance of Compound for * Confidential Treatment Requested by the Registrant. Redacted Portion Filed Separately with the Commission. the conduct of the Eisai Development activities in the amounts and at the times determined by the SC, having reference to the quantity of the bulk substance of Compound required for clinical trials in Japan. Radius shall charge [*] for applicable bulk substance of Compound. Radius shall ship such bulk substance of Compound, FOB point of manufacturing. 5.2 In the event that Eisai notifies Radius of its desire to purchase Semi-Product from Radius which meets specifications determined by Radius in the course of its Development activities pursuant to this Agreement, Radius shall supply Eisai with all amount of Semi-Product required by Eisai for commercial sales of Product in Japan. With respect to Eisai clinical development activities for Product in Japan, upon Eisai’s request, Radius shall supply Eisai Semi-Product for the conduct of the Eisai Development activities in the amounts and at the times determined by the SC, having reference to the quantity of Semi-Product required for clinical trials in Japan. Radius shall charge [*] for Semi-Product. Radius shall ship such Semi-Product, FOB point of manufacturing. 5.3 The Parties agree that they shall, in good faith, discuss, negotiate and execute necessary agreements containing mutually acceptable terms, including but not limited to, a supply agreement for either bulk substance of Compound or Semi-Product as well as a quality control agreement of either bulk substance of Compound or Semi-Product, in the event that Eisai notifies Radius as set forth in Article 5.1 or 5.2. 5.4 As manufacturer of the Product, Radius shall be responsible for: (a) the control of the quality of the Product promoted and sold under the Radius trademarks; as provided in Article 2.3; and (b) ensuring that all bulk substance of Compound or Semi-Product supplied to Eisai pursuant to this Article 5 shall be manufactured in accordance with the applicable good manufacturing practices (GMP) and shall meet the then applicable specifications for the bulk substance of Compound or Semi-Product; and Radius warrants that all bulk substance of Compound or Semi-Product supplied to Eisai pursuant to this Article 5 shall be manufactured in accordance with the applicable GMP and * Confidential Treatment Requested by the Registrant. Redacted Portion Filed Separately with the Commission. shall meet the then applicable specifications for the bulk substance of Compound or Semi-Product and will be free from defects in material and workmanship. Radius shall resolve any product liability issues in the Territory relating to the Product and shall resolve any product liability issues in Japan relating to the Product or the bulk substance of Compound or Semi-Product, as the case may be, supplied to Eisai pursuant to this Article 5 in the event and to the extent related to a breach of the warranty set forth in Article 5.4(b) at its own expense and subject to Article 5.5. 5.5 Radius’ obligations with respect to product liability in the Territory and Japan shall include the following responsibilities, each to be taken at Radius’ expense: (a) Radius shall report, at its expense, to appropriate authorities, in accordance with local requirements, all adverse events related to use of the Product in the Territory or Japan. Eisai shall provide to Radius, upon Radius’ request, reasonable assistance in connection with the reporting of all of adverse events, responding to safety queries and assessing safety issues, in each case, to the extent related to the Product in Japan. Adverse events shall be recorded in a single, centralized database, which shall be held and owned by Radius. Radius will provide, upon request by Eisai, any safety information in Radius’ control and reasonably required by Eisai in connection with the development and commercialization of the Product in Japan and all reasonable assistance in responding to safety queries related to the Product and in assessing safety issues related to the Product in Japan. Details of safety reporting activities relating to the Product will be addressed in a pharmacovigilance contract, which the Parties shall enter into after the Effective Date. (b) In the event that (i) Radius determines that an event, incident, or circumstance may result in the need for a recall or other removal of the Product or any lot or lots thereof from the market; (ii) any regulatory authority in the Territory threatens to remove a Product from the market; or (iii) any regulatory authority in the Territory requires distribution of a “Dear Doctor” letter or its equivalent regarding the use of Product, Radius shall promptly advise Eisai in writing, and shall provide Eisai with copies of all relevant correspondence, notices and the like. Notwithstanding anything the contrary herein, Radius shall have final authority to make all decisions relating to any recall, market withdrawal or other corrective action with respect to the Product in the Territory. After establishing SC pursuant to Article 3.5, all decisions relating to any recall, market withdrawal or other corrective action with respect to the Product shall be decided by the SC as set forth in Article 3.6; provided that in the event that the Parties take different positions with respect to recall, market withdrawal or other corrective action with respect to the Product, then Radius shall have the right to cease supplying bulk substance of Compound or Semi-Product to Eisai for Japan if, after good faith discussions with Eisai, Radius reasonably believes that that continued supply to Eisai exposes Radius to liability as a result of its decision with respect to the Territory. If Radius elects to cease supply, it will terminate supply in an orderly manner, as soon as practical and in accordance with a schedule agreed to by Eisai and Radius. In the event of a recall, market withdrawal or other corrective action with respect to the Product in Japan, and at Radius’ request, Eisai shall provide reasonable assistance to Radius, at Radius’ cost and expense, in conducting any such recall, market withdrawal or other corrective action with respect to the Product in Japan. 5.6 THE WARRANTY IN SECTION 5.4(b) IS IN LIEU OF ANY OTHER WARRANTY WITH RESPECT TO THE PRODUCT, BULK SUBSTANCE OF COMPOUND OR SEMI-PRODUCT SUPPLIED BY RADIUS HEREUNDER, WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE).
Business Contracts All contracts and other agreements (other than the Real Property Leases and Personal Property Leases and the Accounts Receivable) to which the Seller is a party and which are utilized in the conduct of the Business, including without limitation contracts and other agreements relating to suppliers, sales representatives, distributors, consultants, customers, purchase orders, marketing and purchasing arrangements (the "Business Contracts");
PRODUCT MANUFACTURER'S SUPPLIERS Only those dealers/distributors listed by the manufacturer will be considered authorized to act on behalf of the Product Manufacturer.
Succession; Sub-Servicers; Subcontractors (a) For so long as the Trust or any Other Securitization Trust is subject to the reporting requirements of the Exchange Act (in addition to any requirements contained in Section 10.07 of this Agreement), in connection with the succession to the Master Servicer, the Special Servicer or any Sub-Servicer as servicer or sub-servicer (to the extent such Sub-Servicer is a “servicer” as contemplated by Item 1108(a)(2) of Regulation AB) or succession to the Certificate Administrator under this Agreement by any Person (i) into which the Master Servicer, the Special Servicer, such Sub-Servicer or Certificate Administrator may be merged or consolidated, or (ii) which may be appointed as a successor to the Master Servicer, the Special Servicer, any such Sub-Servicer or Certificate Administrator, the Certificate Administrator (or, in the case of a successor to the Certificate Administrator, the Trustee) shall provide to the Depositor, as well as any Other Depositor as to which the applicable Companion Loan is affected, at least five (5) Business Days prior to the effective date of such succession or appointment as long as such disclosure prior to such effective date would not be violative of any applicable law or confidentiality agreement, otherwise no later than one (1) Business Day after such effective date, (x) written notice to the Depositor and each such Other Depositor of such succession or appointment and (y) in writing and in form and substance reasonably satisfactory to the Depositor and each such Other Depositor, all information relating to such successor (which such successor Master Servicer, Special Servicer, Sub-Servicer or Certificate Administrator shall be required to provide) reasonably requested by the Depositor or any such Other Depositor in order to comply with its reporting obligation under Item 6.02 of Form 8-K pursuant to the Exchange Act (if such reports under the Exchange Act are required to be filed under the Exchange Act). The Certificate Administrator (or the Trustee, if applicable) shall provide similar notice to the Depositor and each such Other Depositor in connection with any resignation or termination of the Master Servicer, the Special Servicer, any Sub-Servicer or the Certificate Administrator. In addition, with respect to each Serviced Companion Loan, the Certificate Administrator shall comply with the Trust’s obligations under each Co-Lender Agreement (including with respect to the provision of any required notices) in connection with any resignation, termination, replacement or appointment of the Master Servicer, the Special Servicer, any Sub-Servicer or the Certificate Administrator or any successor thereto. (b) For so long as the Trust or any Other Securitization Trust is subject to the reporting requirements of the Exchange Act, if the Master Servicer, the Special Servicer, any Sub-Servicer, the Custodian, the Trustee and the Certificate Administrator (each of the Master Servicer, the Special Servicer, the Custodian, the Trustee and the Certificate Administrator and each Sub-Servicer, for purposes of this Section 10.02(b), Section 10.02(c), Section 10.02(d) and Section 10.17, a “Servicer”) utilizes one or more Subcontractors to perform certain of its obligations hereunder, such Servicer shall promptly upon request provide to the Depositor, as well as any Other Depositor as to which the applicable Serviced Companion Loan is affected, a written description (in form and substance satisfactory to the Depositor and each such Other Depositor) of the role and function of each Subcontractor that is a Servicing Function Participant utilized by such Servicer during the preceding calendar year, specifying (i) the identity of such Subcontractor, and (ii) which elements of the Servicing Criteria will be addressed in assessments of compliance provided by each such Subcontractor. Each Servicer shall cause any Subcontractor determined to be a Servicing Function Participant used by such Servicer for the benefit of the Depositor to comply with the provisions of Section 10.09 and Section 10.10 of this Agreement to the same extent as if such Subcontractor were such Servicer. Such Servicer shall obtain from each such Subcontractor (or, in the case of each Sub-Servicer set forth on Exhibit S, shall use commercially reasonable efforts to cause such Sub-Servicer) and deliver to the applicable Persons any assessment of compliance report and related accountant’s attestation required to be delivered by such Subcontractor under Section 10.09 and Section 10.10 of this Agreement, in each case, as and when required to be delivered. (c) For so long as the Trust or any Other Securitization Trust is subject to the reporting requirements of the Exchange Act, notwithstanding the foregoing, if a Servicer engages a Subcontractor in connection with the performance of any of its duties under this Agreement, such Servicer shall be responsible for determining whether such Subcontractor is a “servicer” within the meaning of Item 1101 of Regulation AB and whether such Subcontractor meets the criteria in Item 1108(a)(2)(i), (ii) or (iii) of Regulation AB. If a Servicer determines, pursuant to the preceding sentence, that such Subcontractor is a “servicer” within the meaning of Item 1101 of Regulation AB and meets the criteria in Item 1108(a)(2)(i), (ii) or (iii) of Regulation AB, then the engagement of such Subcontractor shall not be effective unless and until notice is given to the Depositor and the Certificate Administrator, as well as any Other Depositor as to which the applicable Companion Loan is affected, of any such Subcontractor and sub-servicing agreement and, if such Subcontractor is engaged by the Master Servicer or the Special Servicer, such Subcontractor shall be deemed to be a Sub-Servicer for purposes of this Agreement. Written notice of the engagement of such Subcontractor and the related Sub-Servicing Agreement (other than such agreements set forth on Exhibit S hereto) (with respect to the Master Servicer or the Special Servicer) or sub-servicing agreement (with respect to any other Servicer) shall be delivered to the Depositor, the Certificate Administrator and each such Other Depositor at least five (5) Business Days prior to the effective date of such engagement. Such notice shall contain all information reasonably necessary, and in such form as may be necessary, to enable the Certificate Administrator, as well as any Other Exchange Act Reporting Party as to which the applicable Serviced Companion Loan is affected, to accurately and timely report the event under Item 6.02 of Form 8-K pursuant to Section 10.07 of this Agreement (if such reports under the Exchange Act are required to be filed under the Exchange Act). (d) For so long as the Trust or any Other Securitization Trust is subject to the reporting requirements of the Exchange Act, notwithstanding the foregoing and subject to Section 3.01(c) of this Agreement, if the Master Servicer or the Special Servicer engages a Sub-Servicer or if any other Servicer engages a sub-servicer, in each case, in connection with the performance of any of the duties of the Master Servicer, the Special Servicer or such other Servicer, as applicable, under this Agreement and the related Sub-Servicing Agreement (with respect to the Master Servicer or the Special Servicer) or sub-servicing agreement (with respect to any other Servicer) is either (i) assigned (other than, in the case of a Sub-Servicer engaged by the Master Servicer, an assignment to the Master Servicer) or (ii) amended or modified and the Master Servicer, the Special Servicer or such other Servicer, as applicable, determines that, as a result of such amendment or modification, the Sub-Servicer or sub-servicer, as applicable, would become a “servicer” within the meaning of Item 1101 of Regulation AB that (1) meets the criteria in Item 1108(a)(2)(i), (ii) or (iii) of Regulation AB or (2) meets the criteria in Item 1108(a)(2)(iii) of Regulation AB and services 20% or more of the pool assets, then the Master Servicer, the Special Servicer or such other Servicer, as applicable, shall provide written notice of such amendment, modification or assignment to the Depositor and the Certificate Administrator, as well as any Other Depositor as to which the applicable Companion Loan is affected at least five (5) Business Days prior to the effective date of such amendment, modification or assignment (or if such prior notice would be violative of applicable law or any applicable confidentiality agreement, no later than the time required under Section 10.07 of this Agreement). Such notice shall contain all information reasonably necessary, and in such form as may be necessary, to enable the Certificate Administrator, as well as any Other Exchange Act Reporting Party as to which the applicable Serviced Companion Loan is affected, to accurately and timely report the event under Item 6.02 of Form 8-K pursuant to Section 10.07 of this Agreement (if such reports under the Exchange Act are required to be filed under the Exchange Act). (e) For so long as the Trust or any Other Securitization Trust is subject to the reporting requirements of the Exchange Act, in connection with the succession to the Trustee or Certificate Administrator under this Agreement by any Person (i) into which the Trustee or Certificate Administrator may be merged or consolidated, or (ii) which may be appointed as a successor to the Trustee or Certificate Administrator, the Trustee or Certificate Administrator, as applicable, shall notify the Depositor and each Other Depositor, at least ten (10) Business Days prior to the effective date of such succession or appointment (or if such prior notice would be violative of applicable law or any applicable confidentiality agreement, no later than the time required under Section 10.07 of this Agreement) and shall furnish pursuant to Section 10.07 of this Agreement to the Depositor and each Other Depositor in writing and in form and substance reasonably satisfactory to the Depositor and each Other Depositor, all information reasonably necessary for the Certificate Administrator, the Trustee and each Other Exchange Act Reporting Party to accurately and timely report the event under Item 6.02 of Form 8-K pursuant to Section 10.07 of this Agreement or otherwise (if such reports under the Exchange Act are required to be filed under the Exchange Act).
Customers; Suppliers Executive does not have, and at any time during the term of this Agreement shall not have, any employment with or any direct or indirect interest in (as owner, partner, shareholder, employee, director, officer, agent, consultant or otherwise) any customer of or supplier to Company.
Customer Contracts 6.2.1 The Redistributor should ensure that its contracts with its Customers give it all necessary rights to control and monitor Data use. 6.2.2 The Redistributor is obliged to make the contents of this Schedule available to its customers.
Direct Contracting Goods and works which the Association agrees meet the requirements for Direct Contracting may be procured in accordance with the provisions of said procurement method.
