STRUCTURE AND DESIGN ELEMENTS Sample Clauses

STRUCTURE AND DESIGN ELEMENTS. 7.1 The WORKS will in all aspects be carried out in accordance with the BUILDING REGULATIONS AND STANDARDS applicable from time to time, and in accordance with any other law or enactment that may apply, or any permitted deviation from these regulations and standards. In the unlikely event of these legal provisions conflicting with the PLAN or the FINISHING SCHEDULE, then the legally binding norms and standards will prevail. The PLAN and the FINISHING SCHEDULE are also subject to changes for compliance with the approved site development plan and architectural guidelines of the township development of which the PROPERTY forms part. 7.2 The foundations and structure of the WORKS, which includes the roof, will be designed and overseen by a competent person, usually a structural or civil engineer or engineers, as required by and in accordance with the BUILDING REGULATIONS AND STANDARDS. The construction of these elements of the WORKS will be executed in accordance with such designs, and may as far as those details are concerned differ from the PLAN and the FINISHING SCHEDULE.
Sample 1Sample 2Sample 3See All (13)
AutoNDA by SimpleDocs
STRUCTURE AND DESIGN ELEMENTS. 7.1 The WORKS will in all aspects be carried out in accordance with the BUILDING REGULATIONS AND STANDARDS applicable from time to time, and in accordance with any other law or enactment that may apply, or any permitted deviation from these regulations and standards. In the unlikely event of these legal provisions conflicting with the PLAN or the FINISHING SCHEDULE, then the legally binding norms and standards will prevail. The PLAN and the FINISHING SCHEDULE are also subject to changes for compliance with the approved site development plan and architectural guidelines of the township development of which the PROPERTY forms part. TGP Construction Cape Town (Pty) Ltd Reg no.: 2017/506093/07 VAT no.: 419 028 0760 Physical Address 3rd Floor, Madison Square, Cnr Xxxx Xxxxxx & Tygerfalls Postal Address PO Box 3667, Tygervalley, 7.2 The foundations and structure of the WORKS, which includes the roof, will be designed and overseen by a competent person, usually a structural or civil engineer or engineers, as required by and in accordance with the BUILDING REGULATIONS AND STANDARDS. The construction of these elements of the WORKS will be executed in accordance with such designs, and may as far as those details are concerned differ from the PLAN and the FINISHING SCHEDULE.
Sample 1
STRUCTURE AND DESIGN ELEMENTS. 6.1 The WORKS will in all aspects be carried out in accordance with BUILDING REGULATIONS AND STANDARDS applicable from time to time, and in accordance with any other law or enactment that may apply, or any permitted deviation from these regulations and standards. In the unlikely event of these legal provisions conflicting with the PLAN or the FINISHING SCHEDULE, then the legally binding norms and standards will prevail. The PLAN and the FINISHING SCHEDULE are also subject to changes for compliance with the approved site development plan and architectural guidelines of the township development of which the PROPERTY forms part. 6.2 The Developer has appointed a Controlling Architect who drafted Architectural Design & Landscape Guidelines to ensure architectural cohesion between structures erected on the xxxxx comprising the Development and generally to ensure that buildings of a standard acceptable to the Developer and other inhabitants are erected in the Development. The purpose of the Architectural Design & Landscape Guideline is to establish a timeless and uniform style and identity for the Development, but will also allow for the individual clients own creativity and style within these Guidelines. The appointed controlling Architect will ensure that the guidelines are complied with during the design and construction phases. 6.3 The foundations and structure of the WORKS, which includes the roof, will be designed and overseen by a competent person, usually a Structural or Civil Engineer or Engineer, as required by and in accordance with BUILDING REGULATIONS AND STANDARDS. The construction of these elements of the WORKS will be executed in accordance with such designs, and may as far as those details are concerned differ from the PLAN and the FINISHING SCHEDULE.
Sample 1
STRUCTURE AND DESIGN ELEMENTS. 7.1 The WORKS will in all aspects be carried out in accordance with the BUILDING REGULATIONS AND STANDARDS applicable from time to time, and in accordance with any other law or enactment that may apply, or any permitted deviation from these regulations and standards. In the unlikely event of these legal provisions conflicting with the PLAN or the FINISHING SCHEDULE, then the legally binding norms and standards will prevail. The PLAN and the FINISHING SCHEDULE are also subject to changes for compliance with the approved site development plan and architectural guidelines of the township development of which the PROPERTY forms part. 7.2 The foundations and structure of the WORKS, which includes the roof, will be designed and overseen by a competent person, usually a structural or civil engineer or engineers, as required by and in accordance with the BUILDING REGULATIONS AND STANDARDS. The construction of these elements of the WORKS will be executed in accordance with such designs, and may as far as those details are concerned differ from the PLAN and the FINISHING SCHEDULE. Redwood Estate Stellenbosch (PTY) LTD Reg no.: 2021/651004/07 Physical Address 3rd Floor, Madison Square, Postal Address PO Box 3667,
Sample 1
STRUCTURE AND DESIGN ELEMENTS. 6.1 The WORKS will in all aspects be carried out in accordance with the BUILDING REGULATIONS AND STANDARDS applicable from time to time, and in accordance with any other law or enactment that may apply, or any permitted deviation from these regulations and standards. In the unlikely event of these legal provisions conflicting with the PLAN or the FINISHING SCHEDULE, then the legally binding norms and standards will prevail. The PLAN and the FINISHING SCHEDULE are also subject to changes for compliance with all the developmental approvals pertaining to the PROPERTY in terms of the Land Use Planning Ordinance 15 of 1985 or other applicable legislation or regulations, including but not limited to the approved site development plan and architectural guidelines of the development of which the PROPERTY forms part. 6.2 The foundations and structure of the WORKS, which includes the roof, will be designed and overseen by a competent person, usually a structural or civil engineer or engineers, as required by and in accordance with the BUILDING REGULATIONS AND STANDARDS. The construction of these elements of the WORKS will be executed in accordance with such designs, and may as far as those details are concerned differ from the PLAN and the FINISHING SCHEDULE.
Sample 1

Related to STRUCTURE AND DESIGN ELEMENTS

  • NATURE AND SCOPE 4.1 This Agreement is an agreement under the terms and conditions of which the Supplier/Service Provider will arrange for the supply/provision to Transnet of the Goods/Services which meet the requirements and specifications of Transnet, the delivery of which is controlled by means of Purchase Orders to be issued by Transnet and executed by the Supplier/Service Provider in accordance with this Agreement. 4.2 Such Purchase Orders and deliveries to Transnet shall be agreed between the Parties from time to time, subject to the terms of the Schedule of Requirements/Work Order. 4.3 Each properly executed Purchase Order forms an inseparable part of this Agreement as if it were fully incorporated into the body of this Agreement. 4.4 During the period of this Agreement, both Parties can make written suggestions for amendments to the Schedule of Requirements/Work Orders in accordance with procedures set out in clause 35 [Amendment and Change Control]. A Party will advise the other Party within 14 [fourteen] Business Days, or such other period as mutually agreed, whether the amendment is acceptable. 4.5 Insofar as any term, provision or condition in the Schedule of Requirements/Work Order conflicts with a like term, provision or condition in this Agreement and/or a Purchase Order, the term or provision or condition in this Master Agreement shall prevail, unless such term or provision or condition in this Master Agreement has been specifically revoked or amended by mutual written agreement between the Parties. 4.6 Time will be of the essence and the Supplier/Service Provider will perform its obligations under this Agreement in accordance with the timeframe(s) [if any] set out in the relevant schedule, save that the Supplier/Service Provider will not be liable under this clause if it is unable to meet such obligation within the time required as a direct result of any act or omission by Transnet and it has used its best endeavours to advise Transnet of such act or omission. In the event of such delay, any time deadlines detailed in the relevant schedule shall be extended by a period equal to the period of that delay.

  • Trunk Group Architecture and Traffic Routing 5.2.1 The Parties shall jointly establish Access Toll Connecting Trunks between CLEC and CBT by which they will jointly provide Tandem-transported Switched Exchange Access Services to Interexchange Carriers to enable such Interexchange Carriers to originate and terminate traffic from and to CLEC's Customers. 5.2.2 Access Toll Connecting Trunks shall be used solely for the transmission and routing of Exchange Access and non-translated Toll Free traffic (e.g., 800/888) to allow CLEC’s Customers to connect to or be connected to the interexchange trunks of any Interexchange Carrier that is connected to the CBT access Tandem. 5.2.3 The Access Toll Connecting Trunks shall be one-way or two-way trunks, as mutually agreed, connecting an End Office Switch that CLEC utilizes to provide Telephone Exchange Service and Switched Exchange Access Service in the given LATA to an access Tandem Switch CBT utilizes to provide Exchange Access in the LATA.

  • Manufacture and Supply As between the Parties, Otsuka shall be responsible for, shall bear all costs associated with, and shall have all decision-making authority over, all Manufacturing Activities (subject to discussion of CMC matters with Acucela through the JDC or applicable Operating Team as discussed below); provided, that Otsuka shall supply Licensed Product to Acucela or its permitted subcontractors for use in clinical trials conducted in accordance with each Development Plan and, if applicable, Commercialization Plan (i.e., Phase 3b Clinical Trials or Post-Approval Studies, if any), free of charge and in such quantities as are agreed by the JDC or the JCC (as applicable) or are otherwise required to seek or obtain Regulatory Approval. In addition, if and after Acucela exercises an Opt-In Right under Section 3.1, Otsuka shall supply promotional samples of Licensed Product to Acucela for use in its performance of Co-Promotion, in such quantities and on such terms as are determined by the JCC. The cost of promotional samples of Licensed Product, which shall be included in Commercialization Costs, shall be established by the JCC based on Otsuka’s per-unit cost to manufacture such promotional samples (but, for the avoidance of doubt, Otsuka shall have no obligation to disclose any information relating to its manufacturing costs), but in no event shall such promotional sample cost exceed * per promotional sample unless mutually agreed otherwise by the Parties. Acucela’s and its permitted subcontractors’ obligations to conduct Development activities, and upon Acucela’s exercise of its Opt-in Right pursuant to Section 3.1, to conduct Development and Commercialization activities, shall be expressly conditioned upon Otsuka fulfilling its Licensed Product supply obligations as set forth in the Development Plan or the Commercialization Plan, as applicable. To the extent that Otsuka reasonably believes is necessary for performance of Development or Commercialization, Otsuka agrees to keep Acucela reasonably informed from time to time, through the JDC, JCC or applicable Operating Team, regarding the general status of Manufacturing Activities related to the Licensed Product (including Other Indication Product(s), as applicable) and from time to time shall update Acucela on any foreseeable delays and/or other material issues relating to Manufacturing the Licensed Product (including Other Indication Product(s), as applicable). Through the JDC or applicable Operating Team, Otsuka and Acucela shall confer and discuss CMC matters, and Otsuka agrees to consider suggestions of Acucela regarding CMC matters.

  • Furniture and Equipment For purposes of this Lease, the terms “furniture and equipment” shall mean collectively all furniture, furnishings, wall coverings, fixtures and hotel equipment and systems located at, or used in connection with, the Hotel, together with all replacements therefor and additions thereto, including, without limitation, (i) all equipment and systems required for the operation of kitchens and bars, laundry and dry cleaning facilities, (ii) office equipment, (iii) material handling equipment, cleaning and engineering equipment, (iv) telephone and computerized accounting systems, and (v) vehicles.

  • BUSINESS STRUCTURE AND ASSIGNMENTS 5.17.1 Contractor shall not assign this Agreement at law or otherwise or dispose of all or substantially all of its assets without the Director’s prior written consent. Nothing in this clause, however, prevents the assignment of accounts receivable or the creation of a security interest under Section 9.406 of the Texas Business & Commerce Code. In the case of such an assignment, Contractor shall immediately furnish the Director and CPO with proof of the assignment and the name, telephone number, and address of the Assignee and a clear identification of the fees to be paid to the Assignee. 5.17.2 Contractor shall not delegate any portion of its performance under this Agreement without the Director’s prior written consent.

  • Capital Structure and Business If all or part of a Credit Party's Stock is pledged to Agent, that Credit Party shall not issue additional Stock. No Credit Party shall amend its charter or bylaws in a manner that would adversely affect Agent or Lenders or such Credit Party's duty or ability to repay the Obligations. No Credit Party shall engage in any business other than the businesses currently engaged in by it or businesses reasonably related thereto.

  • Nature and Purpose of Processing The Parties will Process Shared Personal Data only as necessary to perform under and pursuant to the Applicable Agreements, and subject to this Data Processing Addendum, including as further instructed by Data Subjects.

  • LICENSURE AND CERTIFICATION 25.1 The Employer will continue its current practices related to licensure and certification or comply with 25.2, 25.3 and 25.4, below, whichever provides the greater benefit to the employee.

  • Disclosure and Use 20.2.1 Each Receiving Party agrees that, from and after the Effective Date: (a) all such Proprietary Information communicated or discovered, whether before, on or after the Effective Date, in connection with this Agreement shall be held in confidence to the same extent as such Receiving Party holds its own confidential information; provided, that such Receiving Party shall not use less than a reasonable standard of care in maintaining the confidentiality of such information; (b) it will not, and it will not permit any of its employees, contractors, consultants, agents or affiliates to disclose such Proprietary Information to any other third person; (c) it will disclose Proprietary Information only to those of its employees, contractors, consultants, agents and affiliates who have a need for it in connection with the use or provision of services required to fulfill this Agreement; (d) it will, and will cause each of its employees, contractors, consultants, agents and affiliates to use such Proprietary Information only to effectuate the terms and conditions of this Agreement and for no other purpose; (e) it will cause each of its affiliates to execute individual confidentiality agreements containing the same restrictions as this Article XX; and (f) it will, and will cause each of its employees, contractors, consultants, agents and affiliates, to use such Proprietary Information to create only that Derivative Information necessary for such Receiving Party's compliance with Applicable Law or its performance under the terms of this Agreement. 20.2.2 Any Receiving Party so disclosing Proprietary Information to its employees, contractors, consultants, agents or affiliates shall be responsible for any breach of this Agreement by any of its employees, contractors, consultants, agents or affiliates and such Receiving Party agrees to use its reasonable efforts to restrain its employees, contractors, consultants, agents or affiliates from any prohibited or unauthorized disclosure or use of the Proprietary Information and to assist the Disclosing Party in its efforts to protect such information from disclosure. Each Receiving Party making such disclosure shall notify the Disclosing Party as soon as possible if it has knowledge of a breach of this Agreement in any material respect. 20.2.3 Proprietary Information shall not be reproduced by any Receiving Party in any form except to the extent (i) necessary to comply with the provisions of Section 20.3 and (ii) reasonably necessary to perform its obligations under this Agreement. All such reproductions shall bear the same copyright and proprietary rights notices as are contained in or on the original.

  • Care and Maintenance The Real Estate shall be preserved in its present condition and delivered intact at the time of closing.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!