SUPPLIER PROCESS Sample Clauses

SUPPLIER PROCESS. SUPPLIER’s standard process technology steps, from SUPPLIER owned technologies, developed exclusively by SUPPLIER and implemented in the SUPPLIER wafer fabrication facility to produce the WAFERS.
AutoNDA by SimpleDocs
SUPPLIER PROCESS. SUPPLIER’s standard process technology steps, including improvements and related know how, from SUPPLIER owned or controlled technologies, developed exclusively by SUPPLIER without the use of PI CONFIDENTIAL INFORMATION and implemented in the SUPPLIER wafer fabrication facility to produce the WAFERS.

Related to SUPPLIER PROCESS

  • Order Processing Any order by you for the purchase of shares of the respective Funds through us shall be accepted at the time when it is received by us (or any clearing house agency that we may designate from time to time), and at the offering and sale price next determined, unless rejected by us or the respective Funds. In addition to the right to reject any order, the Funds have reserved the right to withhold shares from sale temporarily or permanently. We will not accept any order from you that is placed on a conditional basis or subject to any delay or contingency prior to execution. The procedures relating to the handling of orders shall be subject to instructions that we shall forward from time to time to all members of the Selling Group. The shares purchased will be issued by the respective Funds only against receipt of the purchase price, in collected New York or Los Angeles Clearing House funds subject to deduction of all concessions on such sale (reallowance of any concessions to which you are entitled on purchases at net asset value will be paid through our direct purchase concession system). If payment for the shares purchased is not received within three days after the date of confirmation the sale may be cancelled forthwith, by us or by the respective Funds, without any responsibility or liability on our part or on the part of the Funds, and we and/or the respective Funds may hold you responsible for any loss, expense, liability or damage, including loss of profit suffered by us and/or the respective Funds, resulting from your delay or failure to make payment as aforesaid.

  • Business Locations; Agent for Process Each of Borrower’s and each of its Subsidiary’s chief executive office, location of books and records and other places of business are as listed on Exhibit 6.1.1 hereto, as updated from time to time by Borrower in accordance with the provisions of subsection 6.1.1. During the preceding one-year period, neither Borrower nor any of its Subsidiaries has had an office, place of business or agent for service of process, other than as listed on Exhibit 6.1.1. All tangible Collateral is and will at all times be kept by Borrower and its Subsidiaries in accordance with subsection 6.1.1. Except as shown on Exhibit 6.1.1, as of the date hereof, no Inventory is stored with a bailee, distributor, warehouseman or similar party, nor is any Inventory consigned to any Person.

  • Manufacturing Services Jabil will manufacture the Product in accordance with the Specifications and any applicable Build Schedules. Jabil will reply to each proposed Build Schedule that is submitted in accordance with the terms of this Agreement by notifying Company of its acceptance or rejection within three (3) business days of receipt of any proposed Build Schedule. In the event of Jabil’s rejection of a proposed Build Schedule, Jabil’s notice of rejection will specify the basis for such rejection. When requested by Company, and subject to appropriate fee and cost adjustments, Jabil will provide Additional Services for existing or future Product manufactured by Jabil. Company shall be solely responsible for the sufficiency and adequacy of the Specifications [***].

  • Approval Process Tenant shall notify Landlord whether it approves of the submitted working drawings within three business days after Landlord’s submission thereof. If Tenant disapproves of such working drawings, then Tenant shall notify Landlord thereof specifying in reasonable detail the reasons for such disapproval, in which case Landlord shall, within five business days after such notice, revise such working drawings in accordance with Tenant’s objections and submit the revised working drawings to Tenant for its review and approval. Tenant shall notify Landlord in writing whether it approves of the resubmitted working drawings within one business day after its receipt thereof. This process shall be repeated until the working drawings have been finally approved by Landlord and Tenant. If Tenant fails to notify Landlord that it disapproves of the initial working drawings within three business days (or, in the case of resubmitted working drawings, within one business day) after the submission thereof, then Tenant shall be deemed to have approved the working drawings in question. Any delay caused by Tenant’s unreasonable withholding of its consent or delay in giving its written approval as to such working drawings shall constitute a Tenant Delay Day (defined below). If the working drawings are not fully approved (or deemed approved) by both Landlord and Tenant by the 15th business day after the delivery of the initial draft thereof to Tenant, then each day after such time period that such working drawings are not fully approved (or deemed approved) by both Landlord and Tenant shall constitute a Tenant Delay Day.

  • Jurisdiction; Service of Process ANY ACTION WITH RESPECT TO THIS AGREEMENT AND THE RIGHTS AND OBLIGATIONS ARISING HEREUNDER, OR FOR RECOGNITION AND ENFORCEMENT OF ANY JUDGMENT IN RESPECT OF THIS AGREEMENT AND THE RIGHTS AND OBLIGATIONS ARISING HEREUNDER BROUGHT BY THE OTHER PARTY OR PARTIES OR THEIR SUCCESSORS OR ASSIGNS, IN EACH CASE, SHALL BE BROUGHT AND DETERMINED EXCLUSIVELY IN THE DELAWARE COURT OF CHANCERY AND ANY STATE APPELLATE COURT THEREFROM WITHIN THE STATE OF DELAWARE (OR, IF THE DELAWARE COURT OF CHANCERY DECLINES TO ACCEPT JURISDICTION OVER A PARTICULAR MATTER, ANY STATE OR FEDERAL COURT WITHIN THE STATE OF DELAWARE). EACH OF THE PARTIES HEREBY IRREVOCABLY WAIVES, AND AGREES NOT TO ASSERT, BY WAY OF MOTION, AS A DEFENSE, COUNTERCLAIM OR OTHERWISE, IN ANY ACTION WITH RESPECT TO THIS AGREEMENT (I) ANY CLAIM THAT IS NOT PERSONALLY SUBJECT TO THE JURISDICTION OF THE ABOVE NAMED COURTS FOR ANY REASON OTHER THAN THE FAILURE TO SERVE IN ACCORDANCE WITH THIS SECTION 20.8, (II) ANY CLAIM THAT IT OR ITS PROPERTY IS EXEMPT OR IMMUNE FROM JURISDICTION OF ANY SUCH COURT OR FROM ANY LEGAL PROCESS COMMENCED IN SUCH COURTS (WHETHER THROUGH SERVICE OF NOTICE, ATTACHMENT PRIOR TO JUDGMENT, ATTACHMENT IN AID OF EXECUTION OF JUDGMENT, EXECUTION OF JUDGMENT OR OTHERWISE) AND (III) TO THE FULLEST EXTENT PERMITTED BY APPLICABLE LAW, ANY CLAIM THAT (A) THE ACTION IN SUCH COURT IS BROUGHT IN AN INCONVENIENT FORUM, (B) THE VENUE OF SUCH ACTION IS IMPROPER OR (C) THIS AGREEMENT, OR THE SUBJECT MATTER HEREOF, MAY NOT BE ENFORCED IN OR BY SUCH COURTS. EACH OF THE PARTIES FURTHER AGREES THAT NO PARTY TO THIS AGREEMENT SHALL BE REQUIRED TO OBTAIN, FURNISH OR POST ANY BOND OR SIMILAR INSTRUMENT IN CONNECTION WITH OR AS A CONDITION TO OBTAINING ANY REMEDY REFERRED TO IN THIS SECTION 20.8 AND EACH PARTY WAIVES ANY OBJECTION TO THE IMPOSITION OF SUCH RELIEF OR ANY RIGHT IT MAY HAVE TO REQUIRE THE OBTAINING, FURNISHING OR POSTING OF ANY SUCH BOND OR SIMILAR INSTRUMENT. THE PARTIES HEREBY AGREE THAT MAILING OF PROCESS OR OTHER PAPERS IN CONNECTION WITH ANY SUCH ACTION OR PROCEEDING IN THE MANNER PROVIDED IN SECTION 20.8, OR IN SUCH OTHER MANNER AS MAY BE PERMITTED BY LAW, SHALL BE VALID AND SUFFICIENT SERVICE THEREOF AND HEREBY WAIVE ANY OBJECTIONS TO SERVICE ACCOMPLISHED IN THE MANNER HEREIN PROVIDED.

  • Process Whenever the Partnership is required under this Article 3 to offer to one or more of the Partner Guarantors an opportunity either to guarantee Qualified Guarantee Indebtedness or enter into a DRO, the Partnership shall be considered to have satisfied its obligation if the other conditions in this Article 3 are satisfied and, not less than thirty (30) days prior to the date that such guarantee would be required to be executed in order to satisfy this Article 3, the Partnership sends by first class mail, return receipt requested, to the last known address of each such Partner Guarantor (as reflected in the records of the Partnership) the Guarantee Agreement or DRO, as applicable, to be executed (which in the case of Guarantee Agreement shall be substantially in the form of Schedule 3.7 hereto, with such changes thereto as are necessary to reflect the relevant facts) and a brief letter explaining the relevant circumstances (including, as applicable, that the offer is being made pursuant to this Article 3, the circumstances giving rise to the offer, a brief summary of the terms of the Qualified Guarantee Indebtedness to be guaranteed, a brief description of the collateral for the Qualified Guarantee Indebtedness, a statement of the amount to be guaranteed, the address to which the executed Guarantee Agreement or DRO, as applicable, must be sent and the date by which it must be received, and a statement to the effect that, if the Protected Partner fails to execute and return such Agreement within the time period specified, the Partner Guarantor thereafter would lose its rights under this Article 3 with respect to the amount of debt that the Partnership is required to offer to be guaranteed or made available for the DRO, and depending upon the Partner Guarantor’s circumstances and other circumstances related to the Partnership, the Partner Guarantor could be required to recognize taxable gain as a result thereof, either currently or prior to the expiration of the Tax Protection Period, that otherwise would have been deferred). If a notice is properly sent in accordance with this procedure, the Partnership shall have not responsibility as a result of the failure of a Partner Guarantor either to receive such notice or to respond thereto within the specified time period.

  • Supplier shall exercise reasonable care in carrying out the provisions of this Agreement, but shall be kept indemnified by, and shall be without liability to CMA and/or any Fund for any action taken or omitted by it in good faith without negligence including, without limitation, acting in accordance with any Proper Instruction. Supplier shall be entitled to rely on and may act upon the advice of counsel (who may be counsel for CMA or any Fund) on all matters arising in connection with the Services. At any time, Supplier may apply to any officer of CMA or a Fund for instructions and may consult with outside counsel for CMA or the applicable Fund or the independent auditors for the Fund at the expense of the Fund, or other individuals designated in writing by CMA or the Fund, for advice with respect to any matter arising in connection with the Services. Supplier shall not be liable, and shall be indemnified by each Fund or CMA, as applicable, for any action taken or omitted by it in good faith in reliance upon any such instructions or advice or upon any paper or document believed by it to be genuine and to have been signed by such officers or individuals. Supplier shall not be held to have notice of any change of authority of any officer or individual until receipt of written notice thereof from the Fund or CMA. Nothing in this Section shall be construed as imposing upon Supplier any obligation to seek such instructions or advice. Without in any way limiting the generality of the foregoing, Supplier shall in no event be liable for any loss or damage arising from causes beyond its control including, without limitation, delay or cessation of services hereunder or any damages to CMA or a Fund resulting therefrom as a result of work stoppage, power or other mechanical failure, natural disaster, governmental action, communication disruption or other impossibility of performance.

  • Technical Specifications Each Bloom System is an integrated system comprised of a fuel cell stack assembly and associated balance of plant components that converts a fuel into electricity using electrochemical means that (i) has a Nameplate Capacity of at least 0.5 kilowatts of electricity using an electrochemical process and (ii) has an electricity-only generation efficiency greater than thirty percent (30%).

  • Product Specifications The Company agrees that all Products sold to Xxxx hereunder shall conform to the respective specifications set forth on Schedule A or to such other specifications as are from time to time agreed upon by the Parties.

  • Jurisdiction and Service of Process EXECUTIVE AND THE COMPANY HEREBY CONSENT TO THE JURISDICTION OF ANY STATE OR FEDERAL COURT LOCATED WITHIN CXXX COUNTY, ILLINOIS, AND IRREVOCABLY AGREE THAT, SUBJECT TO THE OTHER PROVISIONS OF THIS AGREEMENT, ALL ACTIONS OR PROCEEDINGS ARISING OUT OF OR RELATING TO THIS AGREEMENT WHICH MAY BE LITIGATED SHALL BE LITIGATED IN SUCH COURTS. EACH OF EXECUTIVE AND THE COMPANY ACCEPTS FOR SUCH PARTY AND IN CONNECTION WITH SUCH PARTY’S PROPERTIES, GENERALLY AND UNCONDITIONALLY, THE EXCLUSIVE JURISDICTION OF THE AFORESAID COURTS AND WAIVES ANY DEFENSE OF FORUM NON CONVENIENS, AND IRREVOCABLY AGREES TO BE BOUND BY ANY JUDGMENT RENDERED THEREBY IN CONNECTION WITH THIS AGREEMENT. ALL PROCESS IN ANY SUCH PROCEEDINGS IN ANY SUCH COURT SHALL BE MAILED BY REGISTERED MAIL TO THE APPLICABLE PARTY, SUCH SERVICE BEING HEREBY ACKNOWLEDGED BY EACH SUCH PARTY TO BE EFFECTIVE AND BINDING SERVICE IN EVERY RESPECT. NOTHING HEREIN SHALL AFFECT THE RIGHT TO SERVE PROCESS IN ANY OTHER MANNER PERMITTED BY LAW.

Time is Money Join Law Insider Premium to draft better contracts faster.