Technology Transfer Agreements Sample Clauses

Technology Transfer Agreements. The Technology Transfer and License Agreements dated as of January 1, 1994 between the Borrower and each of its Subsidiaries each as originally executed and delivered to the Bank. TOTAL LIABILITIES. Any and all liabilities of the Credit Parties and their Subsidiaries on a consolidated basis determined in accordance with GAAP.
Sample 1Sample 2
AutoNDA by SimpleDocs
Technology Transfer Agreements. The Company shall fulfill all of its obligations under the TTA, the Assignment and Assumption Agreement and the Clinical Development and Collaboration Agreement, which shall be entered into within ninety (90) days after the effective date of the TTA (collectively, the “IP Transfer Agreements”). The Company shall not terminate or exercise the right to terminate the IP Transfer Agreements in breach of their terms and provisions. The Company shall promptly notify RMI of any notice of default under, or termination or amendment of, any IP Transfer Agreement.
Sample 1Sample 2
Technology Transfer Agreements. The Technology Transfer and License Agreements dated as of January 1, 1994 between Sepracor and each of its Subsidiaries each as originally executed and delivered to the Bank.
Sample 1
Technology Transfer Agreements. Article 8.1 Twente..............................................................
Sample 1
Technology Transfer Agreements. See 761 DM 1, 1.6 A, Technology Transfer Agreements.
Sample 1
Technology Transfer Agreements. Summary of Changes Minor revisions approved to: -add references to statutes, and -change term from For Official Use Only information to Controlled Unclassified Information, in accordance with Directive and Standard SLE 02-01. NOTE: This Reclamation Manual release applies to all Reclamation employees. When an exclusive bargaining unit exists, changes to this release may be subject to the provisions of collective bargaining agreements.
Sample 1

Related to Technology Transfer Agreements

  • Technology Transfer Subject to the terms of the Development Supply Agreement, as soon as reasonably practicable, but in no event later than the fifth (5th) anniversary of the Effective Date, Alnylam shall initiate a technology transfer to MedCo, or to its Third Party manufacturer(s) of Licensed Product, selected by MedCo and reasonably acceptable to Alnylam, of Alnylam Know-How that is reasonably necessary or useful for the Manufacture of the Licensed Product, and shall make available its personnel on a reasonable basis to consult with MedCo or such Third Party manufacturer(s) with respect thereto, all at MedCo’s expense, including the Costs reasonably incurred by Alnylam in connection with such technology transfer activities. MedCo shall reimburse Alnylam such Costs incurred with respect to such Manufacturing technology transfer within [***] days after receipt of an invoice therefor. Alnylam and its Affiliates shall keep complete and accurate records in sufficient detail to enable the payments payable hereunder to be determined. Alnylam shall not be required to perform technology transfer to more than one Third Party manufacturer for each stage of the Licensed Product supply chain (i.e., Bulk Drug Substance, Bulk Drug Product and Finished Product). Promptly after MedCo’s written request, Alnylam shall use Commercially Reasonable Efforts to assign to MedCo any manufacturing agreement between Alnylam and a Third Party that is solely related to the manufacture of Licensed Products. Such assignment shall be subject to the terms and conditions of such agreement, including any required consents of such Third Party and MedCo’s written agreement to assume all the obligations of Alnylam under such agreement to be undertaken after such assignment, but Alnylam shall remain solely responsible for its obligations under such agreement arising prior to such assignment. Except as provided in the immediately preceding sentence, MedCo shall be solely responsible for contracting with such Third Party manufacturer (and any other Third Party manufacture to whom Alnylam has initiated technology transfer as set forth in this Section 5.3) for the supply of such Licensed Product and Alnylam shall have no obligations under such agreement between MedCo and such Third Party manufacturer. Alnylam shall use Commercially Reasonable Efforts to obtain any such consent in a form reasonably acceptable to MedCo.

  • Manufacturing Technology Transfer With respect to each Technology Transfer Product, upon AbbVie’s written request after the Inclusion Date for the Included Target to which such Technology Transfer Product is Directed, Morphic shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party manufacturer) of all Morphic Know-How and Joint Know-How relating to the then-current process for the Manufacture of such Technology Transfer Product (the “Manufacturing Process”) and to implement the Manufacturing Process at facilities designated by AbbVie (such transfer and implementation, as more fully described in this Section 5.3, the “Manufacturing Technology Transfer”). To assist with the Manufacturing Technology Transfer, Morphic will make its personnel reasonably available to AbbVie during normal business hours for up to [***] FTE hours with respect to each Included Target (in each case, free of charge to AbbVie) to transfer and implement the Manufacturing Process under this Section 5.3. Thereafter, if requested by AbbVie, Morphic shall continue to perform such obligations; provided, that AbbVie will reimburse Morphic for its full-time equivalent (FTE) costs (for clarity, in excess of [***] FTE hours) and any reasonable and verifiable out-of-pocket costs incurred in providing such assistance. CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY [***], HAS BEEN OMITTED BECAUSE IT IS NOT MATERIAL AND WOULD LIKELY CAUSE COMPETITIVE HARM TO THE COMPANY IF PUBLICLY DISCLOSED.

  • Development Agreement As soon as reasonably practicable following the ISO’s selection of a transmission Generator Deactivation Solution, the ISO shall tender to the Developer that proposed the selected transmission Generator Deactivation Solution a draft Development Agreement, with draft appendices completed by the ISO to the extent practicable, for review and completion by the Developer. The draft Development Agreement shall be in the form of the ISO’s Commission-approved Development Agreement for its reliability planning process, which is in Appendix C in Section 31.7 of Attachment Y of the ISO OATT, as amended by the ISO to reflect the Generator Deactivation Process. The ISO and the Developer shall finalize the Development Agreement and appendices as soon as reasonably practicable after the ISO’s tendering of the draft Development Agreement. For purposes of finalizing the Development Agreement, the ISO and Developer shall develop the description and dates for the milestones necessary to develop and construct the selected project by the required in-service date identified in the Generator Deactivation Assessment, including the milestones for obtaining all necessary authorizations. Any milestone that requires action by a Connecting Transmission Owner or Affected System Operator identified pursuant to Attachment P of the ISO OATT to complete must be included as an Advisory Milestone, as that term is defined in the Development Agreement. If the ISO or the Developer determines that negotiations are at an impasse, the ISO may file the Development Agreement in unexecuted form with the Commission on its own, or following the Developer’s request in writing that the agreement be filed unexecuted. If the Development Agreement is executed by both parties, the ISO shall file the agreement with the Commission for its acceptance within ten (10) Business Days after the execution of the Development Agreement by both parties. If the Developer requests that the Development Agreement be filed unexecuted, the ISO shall file the agreement at the Commission within ten (10) Business Days of receipt of the request from the Developer. The ISO will draft, to the extent practicable, the portions of the Development Agreement and appendices that are in dispute and will provide an explanation to the Commission of any matters as to which the parties disagree. The Developer will provide in a separate filing any comments that it has on the unexecuted agreement, including any alternative positions it may have with respect to the disputed provisions. Upon the ISO’s and the Developer’s execution of the Development Agreement or the ISO’s filing of an unexecuted Development Agreement with the Commission, the ISO and the Developer shall perform their respective obligations in accordance with the terms of the Development Agreement that are not in dispute, subject to modification by the Commission. The Connecting Transmission Owner(s) and Affected System Operator(s) that are identified in Attachment P of the ISO OATT in connection with the selected transmission Generator Deactivation Solution shall act in good faith in timely performing their obligations that are required for the Developer to satisfy its obligations under the Development Agreement.

  • Manufacturing Agreement Each of the Sellers (as applicable) shall have executed and delivered to the Buyer the Manufacturing Agreement with respect to the portion of the Business conducted at the applicable Facility.

  • Assignment of Developments I agree that I will, without additional compensation, promptly make full written disclosure to the Company, and will hold in trust for the sole right and benefit of the Company all developments, original works of authorship, inventions, concepts, know-how, improvements, trade secrets, and similar proprietary rights, whether or not patentable or registrable under copyright or similar laws, which I may solely or jointly conceive or develop or reduce to practice, or have solely or jointly conceived or developed or reduced to practice, or have caused or may cause to be conceived or developed or reduced to practice, during the Assignment Period, whether or not during regular working hours, provided they either (i) relate at the time of conception, development or reduction to practice to the business of any member of the Company Group, or the actual or anticipated research or development of any member of the Company Group; (ii) result from or relate to any work performed for any member of the Company Group; or (iii) are developed through the use of equipment, supplies, or facilities of any member of the Company Group, or any Confidential Information, or in consultation with personnel of any member of the Company Group (collectively referred to as “Developments”). I further acknowledge that all Developments made by me (solely or jointly with others) within the scope of and during the Assignment Period are “works made for hire” (to the greatest extent permitted by applicable law) for which I am, in part, compensated by my salary, unless regulated otherwise by law, but that, in the event any such Development is deemed not to be a work made for hire, I hereby assign to the Company, or its designee, all my right, title, and interest throughout the world in and to any such Development.

  • Marketing Agreement The Company shall have entered into, ------------------- executed and delivered the Marketing Agreement.

  • Technology License 4.1 Unless any event described in Article 2.2 or 2.3 of this Agreement occurs, all of the technology required to be licensed for any of Party B’s business shall be provided by Party A on an exclusive basis. Party A will try its best to license Party B to use the technology owned by Party A, or re-license Party B to use the technology as approved by the owner.

  • License Agreement The Trust shall have the non-exclusive right to use the name "Invesco" to designate any current or future series of shares only so long as Invesco Advisers, Inc. serves as investment manager or adviser to the Trust with respect to such series of shares.

  • Collaboration Agreement The Collaboration Agreement shall not have been terminated in accordance with its terms and shall be in full force and effect.

  • Transfer Agreement Exhibit B, Transfer Agreement, between the Bureau, CONTRACTOR, and the Florida Department of Corrections (the FDC) which establishes guidelines for transfer of inmates between the Bay Correctional Facility and facilities operated by the FDC.

Time is Money Join Law Insider Premium to draft better contracts faster.