Common use of TERMINATION OR REASSIGNMENT OF PERSONNEL Clause in Contracts

TERMINATION OR REASSIGNMENT OF PERSONNEL. The Lessor shall (a) notify immediately the SDR if any Lessor employees assigned to work in the Premises are terminated for any reason or are assigned to other non- Sandia work and will not work in the Premises in the future, and (b) ensure that any Lessor employees identified under this paragraph surrender to the SDR any decals or other access documents within five days of termination or reassignment. CL41 - ES&H SERVICES Lessor shall provide all ES&H services for Lessor or Lessor subcontractor employees performing work in the Premises. CL42 - HAZARDOUS MATERIALS HANDLING For Leases that require the performance of work in the Premises, the Lessor shall coordinate with the SDR all activities associated with the acquisition (including reporting hazardous materials used in the Premises, handling, storage, accidental spills, and/or disposal of hazardous materials and/or waste. The Lessor shall notify the SDR of all hazardous and/or radioactive waste generated during performance of work. Such materials become Sandia-owned waste and the Lessor shall notify the SDR for proper disposal by Sandia. Xxxxxx's assistance in disposal may be required by Xxxxxx. CL43 - HAZARDOUS MATERIALS REMOVAL Those hazardous materials brought in to the Premises by the Lessor which are job- related consumables and have not been removed from their original packaging and which have not been purchased by Xxxxxx, shall remain the property of the Lessor and shall be removed from the Premises after completion of the work. Hazardous materials in the original, labeled container are not hazardous waste if the material is usable and the full or partially full container is intact and properly closed. Those scrap items which are not hazardous and which have not become hazardous through co- mingling with hazardous items are owned by the Lessor and shall also be removed. CL44 - VEHICLE MARKINGS All vehicles used by either the Lessor or its subcontractors in and around the Premises shall be marked clearly to indicate company name of user. Vehicles which do not bear permanent markings may be temporarily marked as follows. Signs, no longer than the vehicle door is wide, with a white or lighter background, showing the Lessor's name in one inch high, or larger, dark colored letters, may be temporarily attached to the vehicle's front door panels so that the signs appear in the approximate center of each door panel.

TERMINATION OR REASSIGNMENT OF PERSONNEL. The Lessor shall Contractor shall: (ai) notify immediately the SDR SCR and the Sandia Access Control and Administration Division at Albuquerque (Sandia Physical Security Division at Livermore; Tonopah Test Range Manager at Tonopah) if any Lessor Contractor employees assigned to work in the Premises under this Contract are terminated for any reason or are assigned to other non- Contractor non-Sandia work and will not work in the Premises under this Contract in the future, and (bii) ensure that any Lessor Contractor employees identified under this paragraph surrender to the SDR Sandia Access Control and Administration Division (Sandia Physical Security Division at Livermore; Tonopah Test Range Manager at Tonopah) any Sandia badge, Kirtland Air Force Base decals or other access documents within five two days of termination or reassignment. CL41 EI36 - ES&H TRAINING Any Contractor personnel who will enter a Government site to perform work shall have completed all of the ES&H training required by the Statement of Work prior to any attempts to enter a Government site as shown by written records of such training furnished to the SDR or to the Requester if no SDR is named in Section I of this Contract. Contractor shall certify to Sandia completion of all required training on the Completion Record for Contractor Administered Training form. This Form can be found on the Web at xxxx://xxx.xxxxxx.xxx/bus-ops/scm/Contractor/Contractor-info.html or obtained from the SDR. Contractor shall provide the completion record form for the initial ESH100 training to the SDR on the first day of work. Contractor shall provide the completion records for any other training required above to the SDR before starting the affected work activity. EI37 - ES&H SERVICES Lessor For Contractor employees performing Sandia-Directed work, Sandia shall provide those workers with any and all necessary safety authorization documents, personal protective equipment, industrial hygiene monitoring, medical surveillance, and radiation protection services. For Contractor employees performing Contractor-Directed work, Contractor shall provide its workers with all ES&H services for Lessor or Lessor subcontractor services, with the exception of Contractor employees performing Contractor-Directed work in the Premises. CL42 - HAZARDOUS MATERIALS HANDLING For Leases that require the performance on Government sites for whom Sandia shall provide radiation dosimetry services and survey of work in the Premisesrecord, the Lessor shall coordinate with the SDR all activities associated with the acquisition (including reporting hazardous materials used in the Premises, handling, storage, accidental spills, and/or disposal of hazardous materials and/or waste. The Lessor shall notify the SDR of all hazardous and/or radioactive waste generated during performance of work. Such materials become Sandia-owned waste and the Lessor shall notify the SDR for proper disposal by Sandia. Xxxxxx's assistance in disposal may be required by Xxxxxx. CL43 - HAZARDOUS MATERIALS REMOVAL Those hazardous materials brought in to the Premises by the Lessor which are job- related consumables and have not been removed from their original packaging and which have not been purchased by Xxxxxx, shall remain the property of the Lessor and shall be removed from the Premises after completion of the work. Hazardous materials in the original, labeled container are not hazardous waste if the material is usable and the full or partially full container is intact and properly closed. Those scrap items which are not hazardous and which have not become hazardous through co- mingling with hazardous items are owned by the Lessor and shall also be removed. CL44 - VEHICLE MARKINGS All vehicles used by either the Lessor or its subcontractors in and around the Premises shall be marked clearly to indicate company name of user. Vehicles which do not bear permanent markings may be temporarily marked as follows. Signs, no longer than the vehicle door is wide, with a white or lighter background, showing the Lessor's name in one inch high, or larger, dark colored letters, may be temporarily attached to the vehicle's front door panels so that the signs appear in the approximate center of each door panelappropriate.

TERMINATION OR REASSIGNMENT OF PERSONNEL. The Lessor Contractor shall (aI) notify immediately the SDR SCR and the Sandia Access Control and Administration Division at Albuquerque (Sandia Physical Security Division at Livermore; Tonopah Test Range Manager at Tonopah) if any Lessor Contractor employees assigned to work in the Premises under this contract are terminated for any reason or are assigned to other non- Contractor non-Sandia work and will not work in the Premises under this contract in the future, and (bii) ensure that any Lessor Contractor employees identified under this paragraph surrender to the SDR Sandia Access Control and Administration Division (Sandia Physical Security Division at Livermore; Tonopah Test Range Manager at Tonopah) any Sandia badge, Kirtland Air Force Base decals or other access documents within five two days of termination or reassignment. CL41 CI39 - ES&H TRAINING Any contractor personnel who will enter a Government site to perform work shall have completed all of the ES&H training required by the Statement of Work prior to any attempts to enter a Government site as shown by written records of such training furnished to the SDR or to the Requester if no SDR is named in Section I of this Contract. Contractor shall certify to Sandia completion of all required training on the Completion Record for Contractor Administered Training form. This Form is located on the Web at xxxx://xxx.xxxxxx.xxx/bus-ops/scm/Contractor/Contractor-info.html or obtained from the SDR. Contractor shall provide the completion record form for the initial ESH100 training to the SDR on the first day of work. Contractor shall provide the completion records for any other training required above to the SDR before starting the affected work activity. Any person not having completed all ES&H training requirements may be denied access to any Government site and Contractor may be terminated for default of this contract as well as every other contract the contractor has with Sandia. CI40 - ES&H SERVICES Lessor For Contractor employees performing Sandia-Directed work, Sandia shall provide those workers with any and all necessary safety authorization documents, personal protective equipment, industrial hygiene monitoring, medical surveillance, and radiation protection services. For Contractor employees performing Contractor-Directed work, Contractor shall provide its workers with all ES&H services for Lessor or Lessor subcontractor services, with the exception of Contractor employees performing Contractor-Directed work in the Premiseson Government sites for whom Sandia shall provide radiation dosimetry services and survey of record, as appropriate. CL42 CI41 - HANDLING OF HAZARDOUS MATERIALS HANDLING For Leases contracts that require the performance of work in the Premiseson Government sites, the Lessor Contractor shall coordinate with the SDR all activities associated with the acquisition (including reporting hazardous materials used in the Premiseson Government sites), handling, storage, accidental spills, and/or disposal of hazardous materials and/or waste. The Lessor Contractor shall notify the SDR of all hazardous and/or radioactive waste generated during performance of work. Such materials become Sandia-owned waste and the Lessor Contractor shall notify the SDR for proper disposal by Sandia. XxxxxxContractor's assistance in disposal may be required by XxxxxxSandia. CL43 CI42 - REMOVAL OF HAZARDOUS MATERIALS REMOVAL Those hazardous materials brought in to the Premises onto Sandia-controlled premises by the Lessor Contractor which are job- job-related consumables and have not been removed from their original packaging and which have not been purchased by XxxxxxSandia, shall remain the property of the Lessor Contractor and shall be removed from the Premises Sandia after completion of the work. Hazardous materials in the original, labeled container are not hazardous waste if the material is usable and the full or partially full container is intact and properly closed. Those scrap items which are not hazardous and which have not become hazardous through co- co-mingling with hazardous items are owned by the Lessor Contractor and shall also be removed. CL44 - VEHICLE MARKINGS All vehicles used by either the Lessor or its subcontractors in and around the Premises shall be marked clearly to indicate company name of user. Vehicles which do not bear permanent markings may be temporarily marked as follows. Signs, no longer than the vehicle door is wide, with a white or lighter background, showing the Lessor's name in one inch high, or larger, dark colored letters, may be temporarily attached to the vehicle's front door panels so that the signs appear in the approximate center of each door panel.

TERMINATION OR REASSIGNMENT OF PERSONNEL. The Lessor shall shall: (a) notify immediately the SDR if any Lessor employees assigned to work in the Premises premises are terminated for any reason or are assigned to other non- Sandia work and will not work in the Premises premises in the future, and (b) ensure that any Lessor employees identified under this paragraph surrender to the SDR any decals or other access documents within five two (2) days of termination or reassignment. CL41 - ES&H ENVIRONMENTAL, SAFETY, AND HEALTH (ES&H) SERVICES Lessor shall provide all ES&H services for Lessor or Lessor subcontractor employees performing work in the Premisespremises. CL42 - HAZARDOUS MATERIALS HANDLING For Leases leases that require the performance of work in the Premisespremises, the Lessor shall coordinate with the SDR all activities associated with the acquisition (including reporting hazardous materials used in the Premisespremises, handling, storage, accidental spills, and/or disposal of hazardous materials and/or waste. The Lessor shall notify the SDR of all hazardous and/or radioactive waste generated during performance of work. Such materials become Sandia-owned waste and the Lessor shall notify the SDR for proper disposal by Sandia. Xxxxxx's assistance in disposal may be required by Xxxxxx. CL43 - HAZARDOUS MATERIALS REMOVAL Those hazardous materials brought in to the Premises premises by the Lessor which are job- job-related consumables and have not been removed from their original packaging and which have not been purchased by Xxxxxx, shall remain the property of the Lessor and shall be removed from the Premises premises after completion of the work. Hazardous materials in the original, labeled container are not hazardous waste if the material is usable and the full or partially full container is intact and properly closed. Those scrap items which are not hazardous and which have not become hazardous through co- co-mingling with hazardous items are owned by the Lessor and shall also be removed. CL44 - VEHICLE MARKINGS All vehicles used by either the Lessor or its subcontractors in and around the Premises premises shall be marked clearly to indicate company name of user. Vehicles which do not bear permanent markings may be temporarily marked as follows. Signs, no longer than the vehicle door is wide, with a white or lighter background, showing the Lessor's name in one inch high, or larger, dark colored letters, may be temporarily attached to the vehicle's front door panels so that the signs appear in the approximate center of each door panel. CL45 - ACCESS TO SANDIA INFORMATION Lessor or subcontractor personnel who enter the premises may be exposed to Sandia or third party information and as part of the access requirements shall cause each person assigned to work in the premises to execute a proprietary information agreement that will be furnished by the SDR to Lessor or their subcontractors before such persons will be allowed to enter the premises.