Common use of Testing/Trouble Reporting Clause in Contracts

Testing/Trouble Reporting. 1.13.4.1 Conextel will be responsible for testing and isolating troubles on Network Elements. Conextel must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Conextel will be required to provide the results of the Conextel test which indicate a problem on the BellSouth network. 1.13.4.2 Once Conextel has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Conextel reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Conextel a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Conextel (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will xxxx Conextel for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Conextel Network PTS will be responsible for testing and isolating troubles on Network Elements. Conextel Network PTS must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Conextel Network PTS will be required to provide the results of the Conextel Network PTS test which indicate a problem on the BellSouth network. 1.13.4.2 Once Conextel Network PTS has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Conextel Network PTS reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Conextel Network PTS a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Conextel Network PTS (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will xxxx Conextel Network PTS for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Conextel Kinetix will be responsible for testing and isolating troubles on Network Elements. Conextel Kinetix must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Conextel Kinetix will be required to provide the results of the Conextel Kinetix test which indicate a problem on the BellSouth network. 1.13.4.2 Once Conextel Kinetix has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Conextel Kinetix reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Conextel Kinetix a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Conextel Kinetix (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will xxxx Conextel Kinetix for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Conextel Quality Telephone will be responsible for testing and isolating troubles on Network Elements. Conextel Quality Telephone must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Conextel Quality Telephone will be required to provide the results of the Conextel Quality Telephone test which indicate a problem on the BellSouth network. 1.13.4.2 Once Conextel Quality Telephone has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Conextel Quality Telephone reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Conextel Quality Telephone a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Conextel Quality Telephone (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will xxxx Conextel Quality Telephone for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Conextel Excel PCHP will be responsible for testing and isolating troubles on Network Elements. Conextel Excel PCHP must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Conextel Excel PCHP will be required to provide the results of the Conextel Excel PCHP test which indicate a problem on the BellSouth network. 1.13.4.2 Once Conextel Excel PCHP has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Conextel Excel PCHP reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Conextel Excel PCHP a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Conextel Excel PCHP (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will xxxx Conextel Excel PCHP for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Conextel Ring Connection will be responsible for testing and isolating troubles on Network Elements. Conextel Ring Connection must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Conextel Ring Connection will be required to provide the results of the Conextel Ring Connection test which indicate a problem on the BellSouth network. 1.13.4.2 Once Conextel Ring Connection has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Conextel Ring Connection reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Conextel Ring Connection a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Conextel Ring Connection (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will xxxx Conextel Xxxx Connection for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Conextel Cinergy will be responsible for testing and isolating troubles on Network Elements. Conextel Cinergy must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Conextel Cinergy will be required to provide the results of the Conextel Cinergy test which indicate a problem on the BellSouth network. 1.13.4.2 Once Conextel Cinergy has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Conextel Cinergy reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Conextel Cinergy a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Conextel Cinergy (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will xxxx Conextel Cinergy for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Conextel Deland Actel will be responsible for testing and isolating troubles on Network Elements. Conextel Deland Actel must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Conextel Deland Actel will be required to provide the results of the Conextel Deland Actel test which indicate a problem on the BellSouth network. 1.13.4.2 Once Conextel Deland Actel has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Conextel Deland Actel reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Conextel Deland Actel a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Conextel Deland Actel (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will xxxx Conextel Xxxxxx Actel for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Conextel Spectrotel will be responsible for testing and isolating troubles on Network Elements. Conextel Spectrotel must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Conextel Spectrotel will be required to provide the results of the Conextel Spectrotel test which indicate a problem on the BellSouth network. 1.13.4.2 Once Conextel Spectrotel has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Conextel Spectrotel reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Conextel Spectrotel a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Conextel Spectrotel (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will xxxx Conextel bill Spectrotel for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Conextel OnFiber will be responsible for testing and isolating troubles on Network Elements. Conextel OnFiber must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Conextel OnFiber will be required to provide the results of the Conextel OnFiber test which indicate a problem on the BellSouth network. 1.13.4.2 Once Conextel OnFiber has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Conextel OnFiber reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Conextel OnFiber a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Conextel OnFiber (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will xxxx Conextel OnFiber for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Conextel FLATEL will be responsible for testing and isolating troubles on Network Elements. Conextel FLATEL must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Conextel FLATEL will be required to provide the results of the Conextel FLATEL test which indicate a problem on the BellSouth network. 1.13.4.2 Once Conextel FLATEL has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Conextel FLATEL reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Conextel FLATEL a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Conextel FLATEL (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will xxxx Conextel FLATEL for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Conextel Seven Bridges will be responsible for testing and isolating troubles on Network Elements. Conextel Seven Bridges must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Conextel Seven Xxxxxxx will be required to provide the results of the Conextel Seven Bridges test which indicate a problem on the BellSouth network. 1.13.4.2 Once Conextel Seven Bridges has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Conextel Seven Bridges reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Conextel Seven Bridges a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth XxxxXxxxx in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Conextel Seven Bridges (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will xxxx Conextel bill Seven Bridges for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Conextel NGTelecom will be responsible for testing and isolating troubles on Network Elements. Conextel NGTelecom must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Conextel NGTelecom will be required to provide the results of the Conextel NGTelecom test which indicate a problem on the BellSouth network. 1.13.4.2 Once Conextel NGTelecom has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Conextel NGTelecom reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Conextel NGTelecom a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Conextel NGTelecom (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will xxxx Conextel NGTelecom for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Conextel Trinity Connect will be responsible for testing and isolating troubles on Network Elements. Conextel Trinity Connect must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Conextel Trinity Connect will be required to provide the results of the Conextel Trinity Connect test which indicate a problem on the BellSouth network. 1.13.4.2 Once Conextel Trinity Connect has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Conextel Trinity Connect reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Conextel Trinity Connect a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Conextel Trinity Connect (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will xxxx Conextel Trinity Connect for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.