Timber Designations Sample Clauses

Timber Designations. Timber designated for cutting shall be confined to Sale Area, except as provided in B2.131, B2.14, B2.15, B2.32, and B5. 1. Sale Area Map
AutoNDA by SimpleDocs
Timber Designations. Timber designated for cutting shall be confined to Contract Area, except as provided in C.1.3.1, C.1.4, C.1.5, C.3.2, and F. 1. Contract Area Map indicates subdivisions, if any, where Marking under C.3.5 is to be done after contract advertisement, except for construction clearing under C.3.2, minor changes under C.3.7, and damaged timber.
Timber Designations. Timber designated for cutting shall be confined to Contract Area, except as provided in B2.131, B2.14, B2.15, B2.32, and B5. 1. Contract Area Map indicates subdivisions, if any, where Marking under B2.35 is to be done after contract adver- tisement, except for construction clearing under B2.32, minor changes under B2.37, and damaged timber.‌ The boundaries of Clearcutting Units, Overstory Removal Units and Understory Removal Units were plainly Marked on ground before contract advertise- ment and are shown on Contract Area Map. Boundary trees shall not be cut. The number of units and approx- imate acreage of timber designations are stated in A3.‌‌‌
Timber Designations. Timber designated for cutting shall be confined to Contract Area, except as provided in CT.1.3.1, CT.1.4, CT.1.5, CT.3.2, and FT. 1. Contract Area Map indicates Payment Units, if any, where Marking under CT.3.5 is to be done after contract advertisement, except for construction clearing under CT.3.2, designation changes under CT.37, and damaged timber.
Timber Designations. Timber designated for cutting shall be confined to Contract Area, except as pro- vided in BT2.131, BT2.14, BT2.15, BT2.32, and BT5.1.
Timber Designations. Timber designated for cutting shall be confined to the Stewarship Project Area. No undesignated timber shall be cut without prior notification to and approval of the Forest Service. Prescriptions/timber designations are included later in this subsection. Number Acres Clearcutting Units Specified Road Clearing Overstory Removal Units Understory Removal Units Individual Trees Incompletely Marked Timber
Timber Designations. Timber designated for cutting shall be confined to Sale Area, except as provided in BT2.131, BT2.14, BT2.15, BT2.32, and BT5.1 . Sale Area Map indicates Payment Units, if any, where Marking under BT2.35 is to be done after timber sale advertise­ ment, except for construction clearing under BT2.32, des­ ignation changes under BT2.37, and damaged timber. The boundaries of Clearcutting Units, Overstory Re­ moval Units, and Understory Removal Units were plainly Marked on ground before timber sale advertisement and are shown on Sale Area Map. Boundary trees shall not be cut. Such units where Measuring is to be completed after date of timber sale advertisement are also shown. The number of units and approximate acreage of timber des­ ignations are stated in AT3.
AutoNDA by SimpleDocs
Timber Designations. Timber designated for cutting shall be confined to Sale Area, except as provided in B2.131, B2.14, B2.15, B2.32, and B5. 1. Sale Area Map B2.36 Incompletely Marked Timber. Trees within incompletely Marked subdivisions shown on Sale Area Map at time of timber sale advertisement shall be designated in accordance with C2.36. A representative sample of the timber to be designated has been Marked prior to timber sale advertisement in accordance with such rules. The approximate locations of the representa- tive sample areas are shown on Sale Area Map.
Timber Designations. Timber designated for cutting shall be confined to Sale Area, except as provided in BT2.131, BT2.14, BT2.32, and BT5.1. The boundaries of Clearcutting Units, Overstory Removal Units, and Understory Removal Units were plainly Marked on ground before timber sale advertisement and are shown on Sale Area Map. Boundary trees shall not be cut. The approximate acreage of timber designations is stated on Page 1.

Related to Timber Designations

  • Board Composition and Board Designations The Company shall ensure that: (i) the qualifications of the persons serving as members of the Board of Directors and the overall composition of the Board comply with the Sxxxxxxx-Xxxxx Act, with the Exchange Act and with the listing rules of the Exchange or any other national securities exchange, as the case may be, in the event the Company seeks to have its Public Securities listed on another exchange or quoted on an automated quotation system, and (ii) if applicable, at least one member of the Audit Committee of the Board of Directors qualifies as an “audit committee financial expert,” as such term is defined under Regulation S-K and the listing rules of the Exchange.

  • Series Designation The Series Designation establishing a Series may: (i) specify a name or names under which the business and affairs of such Series may be conducted; (ii) designate, fix and determine the relative rights, powers, authority, privileges, preferences, duties, responsibilities, liabilities and obligations in respect of Interests of such Series and the Members associated therewith (to the extent such terms differ from those set forth in this Agreement) and (iii) designate or authorize the designation of specific Officers to be associated with such Series. A Series Designation (or any resolution of the Managing Member amending any Series Designation) shall be effective when a duly executed original of the same is included by the Managing Member among the permanent records of the Company, and shall be annexed to, and constitute part of, this Agreement (it being understood and agreed that, upon such effective date, the Series described in such Series Designation shall be deemed to have been established and the Interests of such Series shall be deemed to have been authorized in accordance with the provisions thereof). The Series Designation establishing a Series may set forth specific provisions governing the rights of such Series against a Member associated with such Series who fails to comply with the applicable provisions of this Agreement (including, for the avoidance of doubt, the applicable provisions of such Series Designation). In the event of a conflict between the terms and conditions of this Agreement and a Series Designation, the terms and conditions of the Series Designation shall prevail.

  • Membership Meetings At the request of the Union the University agrees to grant a two (2) hour period twice a calendar year for purposes of a regular membership meeting. The University agrees to grant time off from work without loss of pay to those Employees regularly scheduled to work during that time.

  • Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Lightyear can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Lightyear may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Lightyear to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Lightyear may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

  • Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters). 2.4.2.2 A UCL-D will be 18,000 feet or less in length and is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 Ohms of resistance. 2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Telepak Networks. 2.4.2.4 These Loops are not intended to support any particular services and may be utilized by Telepak Networks to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire. 2.4.2.5 Upon the Effective Date of this Agreement, Unbundled Copper Loop – Long (UCL-L) elements will no longer be offered by BellSouth and no new orders for UCL-L will be accepted. Any existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement will be grandfathered at the rates set forth in the Parties’ interconnection agreement that was in effect immediately prior to the Effective Date of this Agreement. Existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement may remain connected, maintained and repaired according to BellSouth’s TR73600 and may remain connected until such time as they are disconnected by Telepak Networks or BellSouth provides ninety

  • Vacancies Whenever a vacancy in the Board of Trustees shall occur, the remaining Trustees may fill such vacancy by appointing an individual having the qualifications described in this Article by a written instrument signed by a majority of the Trustees then in office or may leave such vacancy unfilled or may reduce the number of Trustees; provided the aggregate number of Trustees after such reduction shall not be less than the minimum number required by Section 2.1 hereof; provided, further, that if the Shareholders of any class or series of Shares are entitled separately to elect one or more Trustees, a majority of the remaining Trustees or the sole remaining Trustee elected by that class or series may fill any vacancy among the number of Trustees elected by that class or series. Any vacancy created by an increase in Trustees may be filled by the appointment of an individual having the qualifications described in this Article made by a written instrument signed by a majority of the Trustees then in office. No vacancy shall operate to annul this Declaration or to revoke any existing agency created pursuant to the terms of this Declaration. Whenever a vacancy in the number of Trustees shall occur, until such vacancy is filled as provided herein, the Trustees in office, regardless of their number, shall have all the powers granted to the Trustees and shall discharge all the duties imposed upon the Trustees by this Declaration.

  • Preferred Stock Directors Whenever, at any time or times, dividends payable on the shares of Designated Preferred Stock have not been paid for an aggregate of six quarterly Dividend Periods or more, whether or not consecutive, the authorized number of directors of the Issuer shall automatically be increased by two and the holders of the Designated Preferred Stock shall have the right, with holders of shares of any one or more other classes or series of Voting Parity Stock outstanding at the time, voting together as a class, to elect two directors (hereinafter the “Preferred Directors” and each a “Preferred Director”) to fill such newly created directorships at the Issuer’s next annual meeting of stockholders (or at a special meeting called for that purpose prior to such next annual meeting) and at each subsequent annual meeting of stockholders until all accrued and unpaid dividends for all past Dividend Periods, including the latest completed Dividend Period (including, if applicable as provided in Section 3(a) above, dividends on such amount), on all outstanding shares of Designated Preferred Stock have been declared and paid in full at which time such right shall terminate with respect to the Designated Preferred Stock, except as herein or by law expressly provided, subject to revesting in the event of each and every subsequent default of the character above mentioned; provided that it shall be a qualification for election for any Preferred Director that the election of such Preferred Director shall not cause the Issuer to violate any corporate governance requirements of any securities exchange or other trading facility on which securities of the Issuer may then be listed or traded that listed or traded companies must have a majority of independent directors. Upon any termination of the right of the holders of shares of Designated Preferred Stock and Voting Parity Stock as a class to vote for directors as provided above, the Preferred Directors shall cease to be qualified as directors, the term of office of all Preferred Directors then in office shall terminate immediately and the authorized number of directors shall be reduced by the number of Preferred Directors elected pursuant hereto. Any Preferred Director may be removed at any time, with or without cause, and any vacancy created thereby may be filled, only by the affirmative vote of the holders a majority of the shares of Designated Preferred Stock at the time outstanding voting separately as a class together with the holders of shares of Voting Parity Stock, to the extent the voting rights of such holders described above are then exercisable. If the office of any Preferred Director becomes vacant for any reason other than removal from office as aforesaid, the remaining Preferred Director may choose a successor who shall hold office for the unexpired term in respect of which such vacancy occurred.

  • Additional Members One or more additional members may be admitted to the Company with the consent of the Member. Prior to the admission of any such additional members to the Company, the Member shall amend this Agreement to make such changes as the Member shall determine to reflect the fact that the Company shall have such additional members. Each additional member shall execute and deliver a supplement or counterpart to this Agreement, as necessary.

  • Board Observer Rights (a) The Company agrees that it will invite Observer to attend, in a non-voting observer capacity, all meetings of the Board and any and all Committees for the purposes of permitting Observer to have current information with respect to the affairs of the Company and the actions taken by the Board and Observer to provide input and advice with respect thereto (the “Approved Purposes”). Observer shall have the right to be heard at any such meeting, but in no event shall Observer: (i) be deemed to be a member of the Board or such Committees; (ii) have the right to vote on any matter under consideration by the Board or such Committees or otherwise have any power to cause the Company to take, or not to take, any action; or (iii) except as expressly set forth in this Agreement, have or be deemed to have, or otherwise be subject to, any duties (fiduciary or otherwise) to the Company or its stockholders or any duties (fiduciary or otherwise) otherwise applicable to the directors of the Company. As a non-voting observer, Observer will also be provided (concurrently with delivery to the directors of the Company and in the same manner delivery is made to them) copies of all notices, minutes, consents, and all other materials or information (financial or otherwise) that are provided to the directors with respect to a meeting or any written consent in lieu of meeting (except to the extent Observer has been excluded therefrom pursuant to clause (c) below). (b) If a meeting of the Board or any of the Committees is conducted via telephone or other electronic medium (e.g., videoconference), Observer may attend such meeting via the same medium; provided, however, that it shall be a material breach of this Agreement by Observer to provide any other person access to such meeting without the Company’s express prior written consent (which consent may be by e-mail). (c) Notwithstanding the foregoing, the Company may exclude Observer from access to any material or meeting or portion thereof if: (i) the Board concludes in good faith, upon advice of the Company’s counsel, that such exclusion is reasonably necessary to preserve the attorney-client privilege between the Company and such counsel; provided, however, that any such exclusion shall apply only to such portion of the material or such portion of the meeting which would be required to preserve such privilege and not to any other portion thereof; or (ii) such portion of a meeting is an executive session limited solely to independent director members of the Board, independent auditors and/or legal counsel, as the Board may designate, and Observer (assuming Observer were a member of the Board) would not meet the then-applicable standards for independence adopted by the New York Stock Exchange, or such other exchange on which the Company’s securities are then traded. (d) The Company shall compensate Observer in the same amount of all cash retainers, meeting fees and any other cash fees as if Observer were an independent director member of the Board and a member of each of the committees thereof, as such cash compensation may be modified from time to time. Further, the Company shall reimburse Observer for all reasonable out-of-pocket expenses incurred by Observer in connection with attendance at Board and Committee meetings. All compensation and reimbursements payable by the Company pursuant to this Section 1(d) shall be paid to Observer in accordance with the Company’s policies and practices with respect to director compensation and expense reimbursement then in effect; provided, however, that any such compensation or reimbursement shall be paid to Observer no later than comparable compensation or reimbursement is paid to the members of the Board. (e) The rights described in this Section 1 shall terminate upon: (i) the end of the Observer Period, as described in the Merger Agreement; (ii) any material violation of the terms of this Agreement by Observer which (A) remains uncured within ten business days after receipt of notice thereof, or (B) if such violation is not subject to cure, directly causes harm to the Company in the Board’s sole and absolute discretion; or (iii) the death or disability of Observer.

  • Filling Vacancies In the filling of vacancies, new positions, transfers or promotions, appointments shall be made to the employee with the required qualifications, and level of competency and efficiency as required by the position specifications, and where such requirements are equal, seniority shall be the determining factor.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!