Common use of Transition for DS1 and DS3 Loops Clause in Contracts

Transition for DS1 and DS3 Loops. 2.1.4.1 For purposes of this Section 2, the Transition Period for DS1 and DS3 Loops is the twelve (12) month period beginning March 11, 2005 and ending March 10, 2006. 2.1.4.2 For purposes of this Section 2, Embedded Base means DS1 and DS3 Loops that were in service for <customer_short_name> as of March 10, 2005. Subsequent disconnects or loss of End Users shall be removed from the Embedded Base. 2.1.4.3 For purposes of this Section 2, a Business Line is defined in 47 C.F.R. § 51.5. 2.1.4.4 BellSouth shall make available DS1 and DS3 Loops as defined in this Section 2. Notwithstanding anything to the contrary in this Agreement, BellSouth shall make available DS1 and DS3 Loops as described in this Section 2.1.4 only for <customer_short_name>’s Embedded Base during the Transition Period: 2.1.4.4.1 DS1 Loops at any location within the service area of a wire center containing 60,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.4.2 DS3 Loops at any location within the service area of a wire center containing 38,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.5 During the Transition Period, the rates for <customer_short_name>’s Embedded Base of DS1 and DS3 Loops described in this Section 2.1.4 shall be as set forth in Exhibit B. 2.1.4.6 The Transition Period shall apply only to <customer_short_name>’s Embedded Base and <customer_short_name> shall not add new DS1 or DS3 loops as described in this Section 2.1.4 pursuant to this Agreement. 2.1.4.7 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.1, no future DS1 Loop unbundling will be required in that wire center. 2.1.4.8 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.2, no future DS3 Loop unbundling will be required in that wire center. 2.1.4.9 At the end of the Transition Period any remaining Embedded Base will be disconnected.

Transition for DS1 and DS3 Loops. 2.1.4.1 For purposes of this Section 2, the Transition Period for DS1 and DS3 Loops is the twelve (12) month period beginning March 11, 2005 and ending March 10, 2006. 2.1.4.2 For purposes of this Section 2, Embedded Base means DS1 and DS3 Loops that were in service for <customer_short_name> AFN as of March 10, 2005. Subsequent disconnects or loss of End Users shall be removed from the Embedded Base. 2.1.4.3 For purposes of this Section 2, a Business Line is defined in 47 C.F.R. § 51.5. 2.1.4.4 BellSouth shall make available DS1 and DS3 Loops as defined in this Section 2. Notwithstanding anything to the contrary in this Agreement, BellSouth shall make available DS1 and DS3 Loops as described in this Section 2.1.4 only for <customer_short_name>AFN’s Embedded Base during the Transition Period: 2.1.4.4.1 DS1 Loops at any location within the service area of a wire center containing 60,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.4.2 DS3 Loops at any location within the service area of a wire center containing 38,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.5 During the Transition Period, the rates for <customer_short_name>AFN’s Embedded Base of DS1 and DS3 Loops described in this Section 2.1.4 shall be as set forth in Exhibit B. 2.1.4.6 The Transition Period shall apply only to <customer_short_name>AFN’s Embedded Base and <customer_short_name> AFN shall not add new DS1 or DS3 loops as described in this Section 2.1.4 pursuant to this Agreement. 2.1.4.7 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.1, no future DS1 Loop unbundling will be required in that wire center. 2.1.4.8 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.2, no future DS3 Loop unbundling will be required in that wire center. 2.1.4.9 At the end of the Transition Period any remaining Embedded Base will be disconnected.

Transition for DS1 and DS3 Loops. 2.1.4.1 For purposes of this Section 2, the Transition Period for DS1 and DS3 Loops is the twelve (12) month period beginning March 11, 2005 and ending March 10, 2006. 2.1.4.2 For purposes of this Section 2, Embedded Base means DS1 and DS3 Loops that were in service for <customer_short_name> CBX One-Stop as of March 10, 2005. Subsequent disconnects or loss of End Users shall be removed from the Embedded Base. 2.1.4.3 For purposes of this Section 2, a Business Line is defined in 47 C.F.R. § 51.5. 2.1.4.4 BellSouth shall make available DS1 and DS3 Loops as defined in this Section 2. Notwithstanding anything to the contrary in this Agreement, BellSouth shall make available DS1 and DS3 Loops as described in this Section 2.1.4 only for <customer_short_name>CBX One-Stop’s Embedded Base during the Transition Period: 2.1.4.4.1 DS1 Loops at any location within the service area of a wire center containing 60,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.4.2 DS3 Loops at any location within the service area of a wire center containing 38,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.5 During the Transition Period, the rates for <customer_short_name>CBX One-Stop’s Embedded Base of DS1 and DS3 Loops described in this Section 2.1.4 shall be as set forth in Exhibit B. 2.1.4.6 The Transition Period shall apply only to <customer_short_name>CBX One-Stop’s Embedded Base and <customer_short_name> CBX One-Stop shall not add new DS1 or DS3 loops as described in this Section 2.1.4 pursuant to this Agreement. 2.1.4.7 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.1, no future DS1 Loop unbundling will be required in that wire center. 2.1.4.8 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.2, no future DS3 Loop unbundling will be required in that wire center. 2.1.4.9 At the end of the Transition Period any remaining Embedded Base will be disconnected.

Transition for DS1 and DS3 Loops. 2.1.4.1 For purposes of this Section 2, the Transition Period for DS1 and DS3 Loops is the twelve (12) month period beginning March 11, 2005 and ending March 10, 2006. 2.1.4.2 For purposes of this Section 2, Embedded Base means DS1 and DS3 Loops that were in service for <customer_short_name> CCI as of March 10, 2005. Subsequent disconnects or loss of End Users shall be removed from the Embedded Base. 2.1.4.3 For purposes of this Section 2, a Business Line is defined in 47 C.F.R. § 51.5. 2.1.4.4 BellSouth shall make available DS1 and DS3 Loops as defined in this Section 2. Notwithstanding anything to the contrary in this Agreement, BellSouth shall make available DS1 and DS3 Loops as described in this Section 2.1.4 only for <customer_short_name>CCI’s Embedded Base during the Transition Period: 2.1.4.4.1 DS1 Loops at any location within the service area of a wire center containing 60,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.4.2 DS3 Loops at any location within the service area of a wire center containing 38,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.5 During the Transition Period, the rates for <customer_short_name>CCI’s Embedded Base of DS1 and DS3 Loops described in this Section 2.1.4 shall be as set forth in Exhibit B. 2.1.4.6 The Transition Period shall apply only to <customer_short_name>CCI’s Embedded Base and <customer_short_name> CCI shall not add new DS1 or DS3 loops as described in this Section 2.1.4 pursuant to this Agreement. 2.1.4.7 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.1, no future DS1 Loop unbundling will be required in that wire center. 2.1.4.8 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.2, no future DS3 Loop unbundling will be required in that wire center. 2.1.4.9 At the end of the Transition Period any remaining Embedded Base will be disconnected.

Transition for DS1 and DS3 Loops. 2.1.4.1 For purposes of this Section 2, the Transition Period for DS1 and DS3 Loops is the twelve (12) month period beginning March 11, 2005 and ending March 10, 2006. 2.1.4.2 For purposes of this Section 2, Embedded Base means DS1 and DS3 Loops that were in service for <customer_short_name> Xxxxxxx Telephone as of March 10, 2005. Subsequent disconnects or loss of End Users shall be removed from the Embedded Base. 2.1.4.3 For purposes of this Section 2, a Business Line is defined in 47 C.F.R. § 51.5. 2.1.4.4 BellSouth shall make available DS1 and DS3 Loops as defined in this Section 2. Notwithstanding anything to the contrary in this Agreement, BellSouth shall make available DS1 and DS3 Loops as described in this Section 2.1.4 only for <customer_short_name>Xxxxxxx Telephone’s Embedded Base during the Transition Period: 2.1.4.4.1 DS1 Loops at any location within the service area of a wire center containing 60,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.4.2 DS3 Loops at any location within the service area of a wire center containing 38,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.5 During the Transition Period, the rates for <customer_short_name>Xxxxxxx Telephone’s Embedded Base of DS1 and DS3 Loops described in this Section 2.1.4 shall be as set forth in Exhibit B. 2.1.4.6 The Transition Period shall apply only to <customer_short_name>Xxxxxxx Telephone’s Embedded Base and <customer_short_name> Xxxxxxx Telephone shall not add new DS1 or DS3 loops as described in this Section 2.1.4 pursuant to this Agreement. 2.1.4.7 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.1, no future DS1 Loop unbundling will be required in that wire center. 2.1.4.8 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.2, no future DS3 Loop unbundling will be required in that wire center. 2.1.4.9 At the end of the Transition Period any remaining Embedded Base will be disconnected.

Transition for DS1 and DS3 Loops. 2.1.4.1 For purposes of this Section 2, the Transition Period for DS1 and DS3 Loops is the twelve (12) month period beginning March 11, 2005 and ending March 10, 2006. 2.1.4.2 For purposes of this Section 2, Embedded Base means DS1 and DS3 Loops that were in service for <customer_short_name> 1-800-RECONEX as of March 10, 2005. Subsequent disconnects or loss of End Users shall be removed from the Embedded Base. 2.1.4.3 For purposes of this Section 2, a Business Line is defined in 47 C.F.R. § 51.5. 2.1.4.4 BellSouth shall make available DS1 and DS3 Loops as defined in this Section 2. Notwithstanding anything to the contrary in this Agreement, BellSouth shall make available DS1 and DS3 Loops as described in this Section 2.1.4 only for <customer_short_name>1-800- RECONEX’s Embedded Base during the Transition Period: 2.1.4.4.1 DS1 Loops at any location within the service area of a wire center containing 60,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.4.2 DS3 Loops at any location within the service area of a wire center containing 38,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.5 During the Transition Period, the rates for <customer_short_name>1-800-RECONEX’s Embedded Base of DS1 and DS3 Loops described in this Section 2.1.4 shall be as set forth in Exhibit B. 2.1.4.6 The Transition Period shall apply only to <customer_short_name>1-800-RECONEX’s Embedded Base and <customer_short_name> 1-800-RECONEX shall not add new DS1 or DS3 loops as described in this Section 2.1.4 pursuant to this Agreement. 2.1.4.7 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.1, no future DS1 Loop unbundling will be required in that wire center. 2.1.4.8 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.2, no future DS3 Loop unbundling will be required in that wire center. 2.1.4.9 At the end of the Transition Period any remaining Embedded Base will be disconnected.

Transition for DS1 and DS3 Loops. 2.1.4.1 For purposes of this Section 2, the Transition Period for DS1 and DS3 Loops is the twelve (12) month period beginning March 11, 2005 and ending March 10, 2006. 2.1.4.2 For purposes of this Section 2, Embedded Base means DS1 and DS3 Loops that were in service for <customer_short_name> InterGlobe as of March 10, 2005. Subsequent disconnects or loss of End Users shall be removed from the Embedded Base. 2.1.4.3 For purposes of this Section 2, a Business Line is defined in 47 C.F.R. § 51.5. 2.1.4.4 BellSouth shall make available DS1 and DS3 Loops as defined in this Section 2. Notwithstanding anything to the contrary in this Agreement, BellSouth shall make available DS1 and DS3 Loops as described in this Section 2.1.4 only for <customer_short_name>InterGlobe’s Embedded Base during the Transition Period: 2.1.4.4.1 DS1 Loops at any location within the service area of a wire center containing 60,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.4.2 DS3 Loops at any location within the service area of a wire center containing 38,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.5 During the Transition Period, the rates for <customer_short_name>InterGlobe’s Embedded Base of DS1 and DS3 Loops described in this Section 2.1.4 shall be as set forth in Exhibit B. 2.1.4.6 The Transition Period shall apply only to <customer_short_name>InterGlobe’s Embedded Base and <customer_short_name> InterGlobe shall not add new DS1 or DS3 loops as described in this Section 2.1.4 pursuant to this Agreement. 2.1.4.7 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.1, no future DS1 Loop unbundling will be required in that wire center. 2.1.4.8 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.2, no future DS3 Loop unbundling will be required in that wire center. 2.1.4.9 At the end of the Transition Period any remaining Embedded Base will be disconnected.

Transition for DS1 and DS3 Loops. 2.1.4.1 For purposes of this Section 2, the Transition Period for DS1 and DS3 Loops is the twelve (12) month period beginning March 11, 2005 and ending March 10, 2006. 2.1.4.2 For purposes of this Section 2, Embedded Base means DS1 and DS3 Loops that were in service for <customer_short_name> Deland Actel as of March 10, 2005. Subsequent disconnects or loss of End Users shall be removed from the Embedded Base. 2.1.4.3 For purposes of this Section 2, a Business Line is defined in 47 C.F.R. § 51.5. 2.1.4.4 BellSouth shall make available DS1 and DS3 Loops as defined in this Section 2. Notwithstanding anything to the contrary in this Agreement, BellSouth shall make available DS1 and DS3 Loops as described in this Section 2.1.4 only for <customer_short_name>Deland Actel’s Embedded Base during the Transition Period: 2.1.4.4.1 DS1 Loops at any location within the service area of a wire center containing 60,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.4.2 DS3 Loops at any location within the service area of a wire center containing 38,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.5 During the Transition Period, the rates for <customer_short_name>Deland Actel’s Embedded Base of DS1 and DS3 Loops described in this Section 2.1.4 shall be as set forth in Exhibit B. 2.1.4.6 The Transition Period shall apply only to <customer_short_name>Deland Actel’s Embedded Base and <customer_short_name> Deland Actel shall not add new DS1 or DS3 loops as described in this Section 2.1.4 pursuant to this Agreement. 2.1.4.7 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.1, no future DS1 Loop unbundling will be required in that wire center. 2.1.4.8 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.2, no future DS3 Loop unbundling will be required in that wire center. 2.1.4.9 At the end of the Transition Period any remaining Embedded Base will be disconnected.

Transition for DS1 and DS3 Loops. 2.1.4.1 For purposes of this Section 2, the Transition Period for DS1 and DS3 Loops is the twelve (12) month period beginning March 11, 2005 and ending March 10, 2006. 2.1.4.2 For purposes of this Section 2, Embedded Base means DS1 and DS3 Loops that were in service for <customer_short_name> Micro-Comm as of March 10, 2005. Subsequent disconnects or loss of End Users shall be removed from the Embedded Base. 2.1.4.3 For purposes of this Section 2, a Business Line is defined in 47 C.F.R. § 51.5. 2.1.4.4 BellSouth shall make available DS1 and DS3 Loops as defined in this Section 2. Notwithstanding anything to the contrary in this Agreement, BellSouth shall make available DS1 and DS3 Loops as described in this Section 2.1.4 only for <customer_short_name>Micro- Comm’s Embedded Base during the Transition Period: 2.1.4.4.1 DS1 Loops at any location within the service area of a wire center containing 60,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.4.2 DS3 Loops at any location within the service area of a wire center containing 38,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.5 During the Transition Period, the rates for <customer_short_name>Micro-Comm’s Embedded Base of DS1 and DS3 Loops described in this Section 2.1.4 shall be as set forth in Exhibit B. 2.1.4.6 The Transition Period shall apply only to <customer_short_name>Micro-Comm’s Embedded Base and <customer_short_name> Micro-Comm shall not add new DS1 or DS3 loops as described in this Section 2.1.4 pursuant to this Agreement. 2.1.4.7 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.1, no future DS1 Loop unbundling will be required in that wire center. 2.1.4.8 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.2, no future DS3 Loop unbundling will be required in that wire center. 2.1.4.9 At the end of the Transition Period any remaining Embedded Base will be disconnected.

Transition for DS1 and DS3 Loops. 2.1.4.1 For purposes of this Section 2, the Transition Period for DS1 and DS3 Loops is the twelve (12) month period beginning March 11, 2005 and ending March 10, 2006. 2.1.4.2 For purposes of this Section 2, Embedded Base means DS1 and DS3 Loops that were in service for <customer_short_name> FeroNetworks as of March 10, 2005. Subsequent disconnects or loss of End Users shall be removed from the Embedded Base. 2.1.4.3 For purposes of this Section 2, a Business Line is defined in 47 C.F.R. § 51.5. 2.1.4.4 BellSouth shall make available DS1 and DS3 Loops as defined in this Section 2. Notwithstanding anything to the contrary in this Agreement, BellSouth shall make available DS1 and DS3 Loops as described in this Section 2.1.4 only for <customer_short_name>FeroNetworks’s Embedded Base during the Transition Period: 2.1.4.4.1 DS1 Loops at any location within the service area of a wire center containing 60,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.4.2 DS3 Loops at any location within the service area of a wire center containing 38,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.5 During the Transition Period, the rates for <customer_short_name>FeroNetworks’s Embedded Base of DS1 and DS3 Loops described in this Section 2.1.4 shall be as set forth in Exhibit B. 2.1.4.6 The Transition Period shall apply only to <customer_short_name>FeroNetworks’s Embedded Base and <customer_short_name> FeroNetworks shall not add new DS1 or DS3 loops as described in this Section 2.1.4 pursuant to this Agreement. 2.1.4.7 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.1, no future DS1 Loop unbundling will be required in that wire center. 2.1.4.8 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.2, no future DS3 Loop unbundling will be required in that wire center. 2.1.4.9 At the end of the Transition Period any remaining Embedded Base will be disconnected.

Transition for DS1 and DS3 Loops. 2.1.4.1 For purposes of this Section 2, the Transition Period for DS1 and DS3 Loops is the twelve (12) month period beginning March 11, 2005 and ending March 10, 2006. 2.1.4.2 For purposes of this Section 2, Embedded Base means DS1 and DS3 Loops that were in service for <customer_short_name> Speedy Reconnect as of March 10, 2005. Subsequent disconnects or loss of End Users shall be removed from the Embedded Base. 2.1.4.3 For purposes of this Section 2, a Business Line is defined in 47 C.F.R. § 51.5. 2.1.4.4 BellSouth shall make available DS1 and DS3 Loops as defined in this Section 2. Notwithstanding anything to the contrary in this Agreement, BellSouth shall make available DS1 and DS3 Loops as described in this Section 2.1.4 only for <customer_short_name>Speedy Reconnect’s Embedded Base during the Transition Period: 2.1.4.4.1 DS1 Loops at any location within the service area of a wire center containing 60,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.4.2 DS3 Loops at any location within the service area of a wire center containing 38,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.5 During the Transition Period, the rates for <customer_short_name>Speedy Reconnect’s Embedded Base of DS1 and DS3 Loops described in this Section 2.1.4 shall be as set forth in Exhibit B. 2.1.4.6 The Transition Period shall apply only to <customer_short_name>Speedy Reconnect’s Embedded Base and <customer_short_name> Speedy Reconnect shall not add new DS1 or DS3 loops as described in this Section 2.1.4 pursuant to this Agreement. 2.1.4.7 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.1, no future DS1 Loop unbundling will be required in that wire center. 2.1.4.8 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.2, no future DS3 Loop unbundling will be required in that wire center. 2.1.4.9 At the end of the Transition Period any remaining Embedded Base will be disconnected.

Transition for DS1 and DS3 Loops. 2.1.4.1 For purposes of this Section 2, the Transition Period for DS1 and DS3 Loops is the twelve (12) month period beginning March 11, 2005 and ending March 10, 2006. 2.1.4.2 For purposes of this Section 2, Embedded Base means DS1 and DS3 Loops that were in service for <customer_short_name> Nex-Phon as of March 10, 2005. Subsequent disconnects or loss of End Users shall be removed from the Embedded Base. 2.1.4.3 For purposes of this Section 2, a Business Line is defined in 47 C.F.R. § 51.5. 2.1.4.4 BellSouth shall make available DS1 and DS3 Loops as defined in this Section 2. Notwithstanding anything to the contrary in this Agreement, BellSouth shall make available DS1 and DS3 Loops as described in this Section 2.1.4 only for <customer_short_name>Nex- Phon’s Embedded Base during the Transition Period: 2.1.4.4.1 DS1 Loops at any location within the service area of a wire center containing 60,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.4.2 DS3 Loops at any location within the service area of a wire center containing 38,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.5 During the Transition Period, the rates for <customer_short_name>Nex-Phon’s Embedded Base of DS1 and DS3 Loops described in this Section 2.1.4 shall be as set forth in Exhibit B. 2.1.4.6 The Transition Period shall apply only to <customer_short_name>Nex-Phon’s Embedded Base and <customer_short_name> Nex- Phon shall not add new DS1 or DS3 loops as described in this Section 2.1.4 pursuant to this Agreement. 2.1.4.7 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.1, no future DS1 Loop unbundling will be required in that wire center. 2.1.4.8 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.2, no future DS3 Loop unbundling will be required in that wire center. 2.1.4.9 At the end of the Transition Period any remaining Embedded Base will be disconnected.

Transition for DS1 and DS3 Loops. 2.1.4.1 For purposes of this Section 2, the Transition Period for DS1 and DS3 Loops is the twelve (12) month period beginning March 11, 2005 and ending March 10, 2006. 2.1.4.2 For purposes of this Section 2, Embedded Base means DS1 and DS3 Loops that were in service for <customer_short_name> Rent-A-Line as of March 10, 2005. Subsequent disconnects or loss of End Users shall be removed from the Embedded Base. 2.1.4.3 For purposes of this Section 2, a Business Line is defined in 47 C.F.R. § 51.5. 2.1.4.4 BellSouth shall make available DS1 and DS3 Loops as defined in this Section 2. Notwithstanding anything to the contrary in this Agreement, BellSouth shall make available DS1 and DS3 Loops as described in this Section 2.1.4 only for <customer_short_name>Rent-A- Line’s Embedded Base during the Transition Period: 2.1.4.4.1 DS1 Loops at any location within the service area of a wire center containing 60,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.4.2 DS3 Loops at any location within the service area of a wire center containing 38,000 or more Business Lines and four (4) or more fiber-based collocators. 2.1.4.5 During the Transition Period, the rates for <customer_short_name>Rent-A-Line’s Embedded Base of DS1 and DS3 Loops described in this Section 2.1.4 shall be as set forth in Exhibit B. 2.1.4.6 The Transition Period shall apply only to <customer_short_name>Rent-A-Line’s Embedded Base and <customer_short_name> Rent- A-Line shall not add new DS1 or DS3 loops as described in this Section 2.1.4 pursuant to this Agreement. 2.1.4.7 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.1, no future DS1 Loop unbundling will be required in that wire center. 2.1.4.8 Once a wire center exceeds both of the thresholds set forth in Section 2.1.4.4.2, no future DS3 Loop unbundling will be required in that wire center. 2.1.4.9 At the end of the Transition Period any remaining Embedded Base will be disconnected.