Purchase of Products You agree to purchase from Us the hardware products, software licenses and services listed on the Order Form, together with all existing accessories, attachments, replacements, and additions (collectively the “Products”) upon the terms stated herein. For the avoidance of doubt, postage meters for use in mailing machines are excluded from the definition of Products. This Purchase Agreement is binding on You as of the date You sign it. This Purchase Agreement is not binding on Us until We sign it or until the Products are shipped, whichever happens first.
Payment for Forest Products Delivered Purchaser agrees to pay the State for delivered forest products at the following rate: $0.00/MBF $250.00/MBF for incorrect species delivery* $20/mbf for Utility logs (Adjusted Gross). Purchaser agrees to increase the above delivered payment rate as approved by the State in the event the location of delivery is changed per the G-026.2 clause. Purchaser will not be billed for any delivered logs that are scaled as containing metal. *When two or more log sorts from this project are delivered to the same destination, the species contained in them are not eligible for the species price reduction. Forest Products delivered that do not meet the sorting specifications in G-022.2 are considered mis-sorts. Purchaser receiving mis-sort Forest Products is required to pay the State at the bid price under this contract. However, when mis-sorted Forest Products amount to more than 5% of the total delivered sort volume, Purchaser may request approval for payment reduction for delivered volume exceeding the mis-sort threshold. Requests for payment reduction must be submitted to the State in writing prior to contract expiration. Eligibility for mis-sort payment reduction is subject to State approval and shall be determined by the State’s delivered product analysis. Forest Products determined by the State eligible for mis-sort price reduction are not eligible for any other price adjustments. Payment reduction for Forest Products deemed mis-sorted will be calculated as follows: Payment Reduction = (B x M) x R M = Mis-sorted volume exceeding threshold excluding utility R = Reduction factor* 0.2 for diameter mis-sort 0.3 for high quality mis-sort *Logs eligible for payment reduction based on multiple reduction factors will be calculated at the higher payment reduction factor. Third-party scaling organization information is required to determine Xxxxxxxx mbf for payment reduction purposes. Value will be derived from the applicable sort value as described in this contract. Scale information for determining mis-sort payment reduction eligibility must be obtained from roll-out scale. Truck-ramp, sample scaling, and/or bundle scaling information is not acceptable for determining eligibility. Purchaser’s exclusive remedy for mis-sorts shall be the payment reduction described in this clause, notwithstanding other provisions in the Uniform Commercial Code Forest Products delivered that do not meet preferred log length specifications or multiples or combinations of preferred lengths and Forest Products delivered not meeting manufacturing standards as described in clause G-024.2 are considered mis- manufactured. Purchaser receiving mis-manufactured Forest Products is required to pay the State at the bid price under this contract. However, when mis-manufactured Forest Products amount to more than 8% of the total delivered sort volume, Purchaser may request approval for payment reduction for delivered volume exceeding the mis-manufacture threshold. Requests for payment reduction must be submitted to the State in writing prior to contract expiration. Eligibility for mis-manufacture payment reduction is subject to State approval and shall be determined by the State’s delivered product analysis. Forest Products determined by the State eligible for mis-manufacture price reductions are not eligible for any other price adjustments. Payment reduction for Forest Products deemed mis-manufactured will be calculated as follows: Payment Reduction = (B x M) x (0.2) Where: B = Bid rate from P-028.2 clause M = Mis-manufactured volume exceeding threshold excluding utility Third-party scaling organization information is required to determine Xxxxxxxx mbf for payment reduction purposes. Value will be derived from the applicable sort value as described in this contract. Scale information for determining mis-manufacture payment reduction eligibility must be obtained from roll-out scale. Truck-ramp, sample scaling, and/or bundle scaling information is not acceptable for determining eligibility. Purchaser’s exclusive remedy for mis-manufacture shall be the payment reduction described in this clause, notwithstanding other provisions in the Uniform Commercial Code.
Additional Products and Services Subject to the allocation of funds, the CPO may add similar equipment, supplies, services, or locations, within the scope of this Agreement, to the list of equipment, supplies, services, or locations to be performed or provided by giving written notification to Contractor. For purposes of this Section, the “Effective Date” means the date specified in the notification from the CPO. As of the Effective Date, each item added is subject to this Agreement, as if it had originally been a part, but the charge for each item starts to accrue only on the Effective Date. In the event the additional equipment, supplies, services, or locations are not identical to the items(s) already under this Agreement, the charges therefor will then be Contractor’s normal and customary charges or rates for the equipment, supplies, services, or locations classified in the Fees and Costs (Exhibit “F”).
Third Party Suppliers If Licensee wishes to obtain the Compound, Product and/or Licensed Product from a Third Party source, Licensee shall notify Pfizer through MPP of the intended source prior to making any commitments to purchase the Compound, Product and/or Licensed Product. Pfizer will determine at its sole discretion whether and on what terms to grant a license to the intended source to produce the Compound, Product and/or Licensed Product or inform Licensee whether such license already exists.
END USER AGREEMENTS (“EUA GAC acknowledges that the END USER may choose to enter into an End User Agreement (“EUA) with the Contractor through this Agreement, and that the term of the EUA may exceed the term of the current H-GAC Agreement. H-GAC’s acknowledgement is not an endorsement or approval of the End User Agreement’s terms and conditions. Contractor agrees not to offer, agree to or accept from the END USER, any terms or conditions that conflict with those in Contractor’s Agreement with H-GAC. Contractor affirms that termination of its Agreement with H-GAC for any reason shall not result in the termination of any underlying EUA, which shall in each instance, continue pursuant to the EUA’s stated terms and duration. Pursuant to the terms of this Agreement, termination of this Agreement will disallow the Contractor from entering into any new EUA with END USERS. Applicable H-GAC order processing charges will be due and payable to H-GAC
Indemnity for Underlying Sales and Supplemental Agreements Vendor shall be solely responsible for any customer claims or any disputes arising out of TIPS Sales or any Supplemental Agreement as if sold in the open-market. The Parties agree that TIPS shall not be liable for any claims arising out of Vendor’s TIPS Sales or Supplemental Agreements, including but not limited to: allegations of product defect or insufficiency, allegations of service defect or insufficiency, allegations regarding delivery defect or insufficiency, allegations of fraud or misrepresentation, allegations regarding pricing or amounts owed for TIPS sales, and/or allegations regarding payment, over-payment, under-payment, or non-payment for TIPS Sales. Payment/Drafting, overpayment/over-drafting, under- payment/under-drafting, or non-payment for TIPS Sales between customer and Vendor and inspections, rejections, or acceptance of such purchases shall be the exclusive respective obligations of Vendor/Customer, and disputes shall be handled in accordance with the terms of the underlying Supplemental Agreement(s) entered into between Vendor and Customer. Vendor acknowledges that TIPS is not a dealer, subcontractor, agent, or reseller of Vendor’s goods and services and shall not be responsible for any claims arising out of alleged insufficiencies or defects in Vendor’s goods and services, should any arise.
Supply Agreement Seller and Buyer, or their Affiliates, shall have executed the Supply Agreement.
Sale of Products (a) All shipments, services, sales and quotations between Axitec, LLC. (“Seller”) and the purchaser (“Purchaser”) of Products set forth herein (“Products”) shall be subject to these Terms and Conditions of Sale (these “Terms” or this “Agreement”). Purchaser acknowledges receipt hereof and accepts these Terms. ANY ADDITIONAL OR DIFFERENT TERMS OR CONDITIONS CONTAINED IN ANY RESPONSE HERETO BY PURCHASER OR IN PURCHASER’S INITIAL ORDER AND ANY ASSERTIONS BY THE SALES REPRESENTATIVE THAT ARE NOT EXPRESSLY DESCRIBED IN THESE TERMS AND CONDITIONS OF SALE OUTSIDE OF THESE EXPRESSED TERMS AND CONDITIONS ARE HEREBY REJECTED BY SELLER AND SHALL BE OF NO EFFECT NOR IN ANY CIRCUMSTANCES BINDING ON SELLER. Seller’s acceptance of any order offered by Purchaser is EXPRESSLY MADE CONDITIONAL on Purchaser’s assent to these Terms, and under no circumstances will any terms other than these Terms apply to Seller’s sale of the Products. (b) Seller’s quotations are not binding on Seller after 10 business days of submission of quotation. Each order of Products shall be in writing and no order of Purchaser shall be binding on Seller until the earlier of (i) payment of products has occurred or payment terms have been established and shipping arrangements have been made (ii) shipment to Purchaser of Products or (iii) transmittal of a written acceptance by Seller. Seller’s failure to respond to Purchaser’s order within two (2) weeks after receipt of the order shall be considered a rejection of the order. (c) Purchaser may cancel any order before it has become binding pursuant to subsection (b) above. Seller may cancel all accepted orders and deliveries of Products if (i) Purchaser makes an assignment for the benefit of creditors, (ii) becomes party to a voluntary or involuntary proceeding of insolvency, bankruptcy or reorganization, (iii) generally becomes unable to pay its debts as they become due, (iv) fails to remit payment to Seller in accordance with the terms hereof or under any other agreement between Seller and Purchaser, or (v) breaches any other term, provision or condition contained in these Terms. (vi) in cases where fraud and deceit is evident in the payment of products (d) All references in sales brochures, data sheets and offers as to specifications, price and other details of the Products are approximate and shall not be binding on the Seller unless expressly agreed to in writing. Seller may, from time to time, update and replace Products in its line. Seller reserves the right to substitute updated Products, provided that such updated Products meet the specifications of the ordered Products in all material respects and are sold for the same price as the ordered Products. (e) Purchaser acknowledges that Seller’s acceptance of any purchase order is dependent on Seller’s prior approval of Purchaser’s business credit and personal credit with personal guarantee where warranted. Purchaser acknowledges that Seller may demand assurances of Purchaser’s ability to pay by requesting such trade or banking references or a letter of credit or such other information as deemed adequate by Seller.
End User Agreement This publication is distributed under the terms of Article 25fa of the Dutch Copyright Act. This article entitles the maker of a short scientific work funded either wholly or partially by Dutch public funds to make that work publicly available for no consideration following a reasonable period of time after the work was first published, provided that clear reference is made to the source of the first publication of the work. Research outputs of researchers employed by Dutch Universities that comply with the legal requirements of Article 25fa of the Dutch Copyright Act, are distributed online and free of cost or other barriers in institutional repositories. Research outputs are distributed six months after their first online publication in the original published version and with proper attribution to the source of the original publication. You are permitted to download and use the publication for personal purposes. All rights remain with the author(s) and/or copyrights owner(s) of this work. Any use of the publication other than authorised under this licence or copyright law is prohibited. If you believe that digital publication of certain material infringes any of your rights or (privacy) interests, please let the University Library know, stating your reasons. In case of a legitimate complaint, the University Library will, as a precaution, make the material inaccessible and/or remove it from the website. Please contact the University Library through email: xxxxxxxxx@xxx.xx.xx. You will be contacted as soon as possible. University Library Radboud University
PRODUCT MANUFACTURER'S SUPPLIERS Only those dealers/distributors listed by the manufacturer will be considered authorized to act on behalf of the Product Manufacturer.
