Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.
PRICE LISTS AND PRODUCT INFORMATION Contractors should provide an electronic version of the proposed price list in an Excel format or pdf on a jump drive. Also provide a dealer list, if applicable in an Excel format with "read and write" capabilities on the same jump drive. No costs or expenses associated with providing this information in the required format shall be charged to the State of Arkansas. At the time of contract renewal contractor will furnish OSP with an updated dealer list and published price list.
Products Products available under this Contract are limited to Software, including Software as a Service, products and related products as specified in Appendix C, Pricing Index. Vendor may incorporate changes to their product offering; however, any changes must be within the scope of products awarded based on the posting described in Section 1.B above. Vendor may not add a manufacturer’s product line which was not included in the Vendor’s response to the solicitation described in Section 1.B above.
Custom Products Effective upon creation of Custom Products, Contractor hereby conveys, assigns and transfers to Authorized User the sole and exclusive rights, title and interest in Custom Product(s), whether preliminary, final or otherwise, including all trademark and copyrights. Contractor hereby agrees to take all necessary and appropriate steps to ensure that the Custom Products are protected against unauthorized copying, reproduction and marketing by or through Contractor, its agents, employees, or Subcontractors. Nothing herein shall preclude the Contractor from otherwise using the related or underlying general knowledge, skills, ideas, concepts, techniques and experience developed under a Purchase Order, project definition or work order in the course of Contractor’s business. Authorized User may, by providing written notice thereof to the Contractor, elect in the alternative to take a non-exclusive perpetual license to Custom Products in lieu of Authorized User taking exclusive ownership and title to such Products. In such case, Licensee on behalf of all Authorized Users shall be granted a non-exclusive perpetual license to use, execute, reproduce, display, perform, adapt and distribute Custom Product as necessary to fully effect the general business purpose(s) as stated in paragraph (b)(i)(2), above.
Customers (a) Not later than sixty (60) calendar days following the date hereof (except as otherwise required by applicable law): (i) Seller will notify the holders of Deposits to be transferred on the Closing Date that, subject to the terms and conditions of this Agreement, Purchaser will be assuming liability for such Deposits; and (ii) each of Seller and Purchaser shall provide, or join in providing where appropriate, all notices to customers of the Branches and other Persons that either Seller or Purchaser, as the case may be, is required to give under applicable law or the terms of any agreement between Seller and any customer in connection with the transactions contemplated hereby, or, to the extent permitted by applicable law and the terms of any agreement between Seller and any customer, will further an efficient transition of the Deposit and Loan relationships to Purchaser; provided that Seller and Purchaser agree that any joint notices shall not include any dual-branded letters but instead shall include individual bank inserts for each of Seller and Purchaser. A party proposing to send or publish any notice or communication pursuant to this Section 4.2 shall furnish to the other party a copy of the proposed form of such notice or communication at least five (5) Business Days in advance of the proposed date of the first mailing, posting, or other dissemination thereof to customers, and shall not unreasonably refuse to amend such notice to incorporate any changes that the other such party proposes as necessary to comply with applicable law. Seller shall have the right to add customer transition information to any customer notifications to be sent by Purchaser pursuant to this Section 4.2 and such information may, at Seller’s option, be included either directly in Purchaser’s notification or in an additional insert that shall accompany the applicable Purchaser notification. Any customer notifications sent by Purchaser pursuant to this Section 4.2 shall only include the last four digits of any account number of Seller. All costs and expenses of any notice or communication sent or published by Purchaser or Seller shall be the responsibility of the party sending such notice or communication and all costs and expenses of any joint notice or communication shall be shared equally by Seller and Purchaser. As soon as reasonably practicable and in any event within forty five (45) calendar days after the date hereof, Seller shall provide to Purchaser a report of the names and addresses of the owners of the Deposits, the borrowers on the Loans and the lessees of the safe deposit boxes as of a recent date hereof in connection with the mailing of such materials and Seller shall provide updates to such report at reasonable intervals thereafter upon the reasonable request of Purchaser from time to time. No communications by Purchaser, and no communications by Seller outside the ordinary course of business, to any such owners, borrowers, customers or lessees as such shall be made prior to the Closing Date except as provided in this Agreement or otherwise agreed to by the parties in writing, not to be unreasonably withheld in the case of communications compliant with applicable law and agreements between Seller and such owners, borrowers, customers or lessees that are appropriate to further an efficient transition of Deposit and Loan relationships to Purchaser. (b) Following the giving of any notice described in Section 4.2(a), Purchaser and Seller shall deliver to each new customer at any of the Branches such notice or notices as may be reasonably necessary to notify such new customers of Purchaser’s pending assumption of liability for the Deposits and to comply with applicable law. (c) Neither Purchaser nor Seller shall object to the use, by depositors of the Deposits, of payment orders or cashier’s checks issued to or ordered by such depositors on or prior to the Closing Date, which payment orders bear the name, or any logo, trademark, service xxxx or the proprietary xxxx of Seller or any of its respective Affiliates. (d) Purchaser shall notify Deposit account customers and Loan account customers that, upon the expiration of a post-Closing processing period, which shall be sixty (60) calendar days after the Closing Date, any Items that are drawn on Seller shall not thereafter be honored by Seller. Such notice shall be given by delivering written instructions to such effect to such Deposit account customers and Loan account customers in accordance with this Section 4.2.
Product Sales Subject to Sections 10.3(c) and 10.3(d), Licensee agrees that it will not sell, offer for sale, or assist third parties (including Affiliates) in selling Product except for the sale and offer for sale of (A) TAF Product, TAF Combination Product, TDF Product and TDF Combination Product for use in the Field and in the countries of the TDF-TAF Territory, (B) COBI Product and COBI Combination Product for use in the Field and in the countries of the COBI Territory, and (C) EVG Product, EVG Combination Product and Quad Product for use in the Field and in the countries of the EVG-Quad Territory. (i) Licensee agrees that during the period in which the Patents are valid and enforceable (on a Product-by-Product basis) it will prohibit its Distributors from selling Product (A) to any other wholesaler or distributor, (B) outside the Territory for which Licensee is licensed for sale of such Product pursuant to Section 2.2, or (C) for any purpose outside the Field. (ii) Licensee agrees that it will not administer the TAF Quad to humans, or sell the TAF Quad until Gilead has obtained marketing approval for the TAF Quad from the FDA. Licensee agrees that it will not administer EVG to humans, or sell Products containing EVG until Gilead has obtained marketing approval for an EVG Product from the FDA. Licensee agrees that it will not administer COBI to humans, or sell Products containing COBI until Gilead has obtained marketing approval for a COBI Product from the FDA. Licensee agrees that it will not administer TAF to humans, or sell Products containing TAF until Gilead has obtained marketing approval for a TAF Product from the FDA. If Gilead obtains marketing approval from the FDA for any Quad Product or a Combination Product containing TAF, COBI or EVG (“Approved Combination Product”) prior to obtaining marketing approval for a TAF Product, EVG Product or COBI Product from the FDA, then Licensee will be allowed to administer such Quad Product or such Approved Combination Product to humans, and sell such Quad Product or such Approved Combination Product from and after the date of such marketing approval from the FDA, but will not (A) administer to humans or sell Combination Products containing EVG other than such Quad Product or such Approved Combination Product until Gilead has obtained marketing approval from the FDA for an EVG Product, or (B) administer to humans or sell Combination Products containing COBI other than such Quad Product or such Approved Combination Product until Gilead has obtained marketing approval from the FDA for a COBI Product or (C) administer to humans or sell Combination Products containing TAF other than such Quad Product or such Approved Combination Product until Gilead has obtained marketing approval from the FDA for a TAF Product.
API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.
Supplier A manufacturer, fabricator, distributor, supplier, or vendor of goods or equipment in connection with the Work, or any other party having a Contract or Purchase Order with the Contractor or with a Subcontractor to furnish materials or equipment to be incorporated in the Work by the Contractor or a Subcontractor.
PRODUCT MANUFACTURER'S SUPPLIERS Only those dealers/distributors listed by the manufacturer will be considered authorized to act on behalf of the Product Manufacturer.
Recycled Products The Contractor agrees to comply with all the requirements of Section 6002 of the Resource Conservation and Recovery Act (RCRA), as amended (42 U.S.C. 6962), including but not limited to the regulatory provisions of 40 CFR Part 247, and Executive Order 12873, as they apply to the procurement of the items designated in Subpart B of 40 CFR Part 247. References: 42 U.S.C. 6962, 40 CFR Part 247, Executive Order 12873 (More than $10,000)
