Wafer Fabrication Sample Clauses

Wafer Fabrication. Process-control monitor (PCM) scribe-line test chip design and characterization, and electrical test for [***] of finished wafers
Sample 1Sample 2
Wafer Fabrication. The Company shall initially conduct wafer fabrication at Fab 25 in Austin, Texas. In addition, FASL (Japan) will initially conduct wafer fabrication by contract to the Company at JV1, JV2 and JV3.
Sample 1Sample 2
Wafer Fabrication. PSL will fabricate all Wafers at its Bloomington, Minnesota facility, using the process technologies stated in Appendix A. 2.1 PSL will provide Allegro with PQW or qualification reports to establish wafer fabrication processes with the following conditions: 2.1.1 Wafer lot sizes will be as specified in Appendix D; 2.1.2 Split Wafer lots for PQW will be mutually agreed upon by Allegro and PSL; 2.1.3 PQW processed to standard conditions shall meet optical and mutually agreed upon electrical specification(s); 2.1.4 PQW not processed to standard conditions will meet optical and mutually agreed upon electrical specification(s); 2.1.5 Allegro acknowledges that the sale of all PQW not processed to standard conditions, but processed correctly within practical limits according to the mutually agreed upon process flow, will be made “AS IS” and with all faults and without warranties, either express or implied, except as provided in Section 2.1.4; 2.1.6 Future Wafer processes, including modifications to current Wafer processes, that are developed by PSL may be added to this Agreement by mutual consent; 2.1.7 PSL may subcontract various wafer processes at an outside subcontractor subject to Allegro’s prior written consent; 2.1.8 PSL will not transfer Allegro product from one fabrication facility to another regardless of the process or technology being qualified at another fab without Allegro’s prior written consent; 2.1.9 Subject to Allegro’s prior written consent, PSL may terminate the use of a Wafer process at the PSL Fab. At least [XXX] prior to the date of the discontinuance of any process, PSL will provide Allegro with written notice of its intent to terminate such Wafer process and will cooperate with Allegro on a transition plan that allows Allegro to meet all of Allegro’s contractual obligations with Allegro’s customers that provides Allegro’s customer with a maximum supply of [XXX] of inventory. PSL will also reimburse Allegro for all expenses incurred to redesign and requal affected devices independent of whether the replacement design is manufactured at PSL. 2.2 PSL will accept Allegro’s purchase orders for Engineering Wafers for Device Types, based on qualified processes with the following conditions: 2.2.1 Wafer lot sizes will be as specified in Appendix D; 2.2.2 Split Wafer lots for Engineering Wafers will be mutually agreed upon by Allegro and PSL; 2.2.3 Special instructions for Engineering Wafers will be documented in Allegro purchase orders; 2.2.4 Engi...
Sample 1
Wafer Fabrication. The Company shall initially conduct wafer fabrication at Fab 00 xx Xxxxxx, Xxxxx. In addition, FASL (Japan) will initially conduct wafer fabrication by contract to the Company at JV1, JV2 and JV3.
Sample 1
Wafer Fabrication 
Sample 1

Related to Wafer Fabrication

  • Fabrication Making up data or results and recording or reporting them.

  • Manufacturing (a) The Supplier shall without limitation be responsible, at no additional cost to the Purchaser, for: sourcing and procuring all raw materials for the Products; obtaining all necessary approvals, permits and licenses for the manufacturing of the Products; providing sufficient qualified staff and workers to perform the obligations under this Purchase Agreement; implementing and maintaining effective inventory and production control procedures with respect to the Products; and handling other matters as reasonably requested by the Purchaser from time to time. (b) The Supplier shall not change any process, material, component, packaging or manufacturing location without the Purchaser’s express prior written approval.

  • RE-WEIGHING PRODUCT Deliveries are subject to re- weighing at the point of destination by the Authorized User. If shrinkage occurs which exceeds that normally allowable in the trade, the Authorized User shall have the option to require delivery of the difference in quantity or to reduce the payment accordingly. Such option shall be exercised in writing by the Authorized User.

  • Manufacture 2.1. The LED(s) on the LED module shall be equipped with suitable fixation elements. 2.2. The fixation elements shall be strong and firmly secured to the LED(s) and the LED module.

  • Purchase Order Pricing/Product Deviation If a deviation of pricing/product on a Purchase Order or contract modification occurs between the Vendor and the TIPS Member, TIPS must be notified within five (5) business days of receipt of change order. TIPS reserves the right to terminate this agreement for cause or no cause for convenience with a thirty (30) days prior written notice. Termination for convenience is conditionally required under Federal Regulations 2 CFR part 200 if the customer is using federal funds for the procurement. All purchase orders presented to the Vendor, but not fulfilled by the Vendor, by a TIPS Member prior to the actual termination of this agreement shall be honored at the option of the TIPS Member. The awarded Vendor may terminate the agreement with ninety (90) days prior written notice to TIPS 0000 XX Xxx Xxxxx, Xxxxxxxxx, Xxxxx 00000. The vendor will be paid for goods and services delivered prior to the termination provided that the goods and services were delivered in accordance with the terms and conditions of the terminated agreement. This termination clause does not affect the sales agreements executed by the Vendor and the TIPS Member customer pursuant to this agreement. TIPS Members may negotiate a termination for convenience clause that meets the needs of the transaction based on applicable factors, such as funding sources or other needs. Usually, purchase orders or their equal are issued by participating TIPS Member to the awarded vendor and should indicate on the order that the purchase is per the applicable TIPS Agreement Number. Orders are typically emailed to TIPS at xxxxxx@xxxx-xxx.xxx. • Awarded Vendor delivers goods/services directly to the participating member. • Awarded Vendor invoices the participating TIPS Member directly. • Awarded Vendor receives payment directly from the participating member. • Fees are due to TIPS upon payment by the Member to the Vendor. Vendor agrees to pay the participation fee to TIPS for all Agreement sales upon receipt of payment including partial payment, from the Member Entity or as otherwise agreed by TIPS in writing and signed by an authorized signatory of TIPS.

  • API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.

  • Consumables During the design phase, Purchaser may participate in the selection of suppliers of consumables of the Supplier. In such case, the choice regarding the final selection of the said suppliers shall be mutually agreed between the Parties. Two suppliers shall be identified and selected for each type of consumables.

  • Assembly (a) The Contracting Parties shall have an Assembly. (b) Each Contracting Party shall be represented by one delegate who may be assisted by alternate delegates, advisors and experts. (c) The expenses of each delegation shall be borne by the Contracting Party that has appointed the delegation. The Assembly may ask WIPO to grant financial assistance to facilitate the participation of delegations of Contracting Parties that are regarded as developing countries in conformity with the established practice of the General Assembly of the United Nations or that are countries in transition to a market economy. (a) The Assembly shall deal with matters concerning the maintenance and development of this Treaty and the application and operation of this Treaty. (b) The Assembly shall perform the function allocated to it under Article 26(2) in respect of the admission of certain intergovernmental organizations to become party to this Treaty. (c) The Assembly shall decide the convocation of any diplomatic conference for the revision of this Treaty and give the necessary instructions to the Director General of WIPO for the preparation of such diplomatic conference. (a) Each Contracting Party that is a State shall have one vote and shall vote only in its own name. (b) Any Contracting Party that is an intergovernmental organization may participate in the vote, in place of its Member States, with a number of votes equal to the number of its Member States which are party to this Treaty. No such intergovernmental organization shall participate in the vote if any one of its Member States exercises its right to vote and vice versa. (4) The Assembly shall meet in ordinary session once every two years upon convocation by the Director General of WIPO. (5) The Assembly shall establish its own rules of procedure, including the convocation of extraordinary sessions, the requirements of a quorum and, subject to the provisions of this Treaty, the required majority for various kinds of decisions.

  • Tooling Unless otherwise specified in this Agreement, all tooling and/or all other articles required for the performance hereof shall be furnished by Seller, maintained in good condition and replaced when necessary at Seller's expense. If NETAPP agrees to pay Seller for special tooling or other items either separately or as a stated part of the unit price of Goods purchased herein, title to same shall be and remain in NETAPP upon payment therefore.

  • OPEN SOURCE COMPONENTS The DS Offerings may include open source components. Whenever notices (such as acknowledgment, copies of licenses or attribution notice) are required by the original licensor, such notices are included in the Documentation of the DS Offerings. Moreover, some open source components may not be distributed and licensed under the terms of the Agreement but under the terms of their original licenses as set forth in the Documentation of the DS Offerings themselves. Source code for open source software components is available upon request. Except for components mentioned in the section EXCLUSIONS below, the warranty and indemnification provided by DS under the Agreement apply to all open source software components and shall be provided by DS and not by the original licensor, but only for the use of the DS Offerings that is in compliance with the terms of the Agreement, and in conjunction with the DS Offerings. The original licensors of said open source software components provide them on an “as is” basis and without any liability whatsoever to Customer.

Most Referenced Clauses

Most Referenced Definitions