Member Access to Vendor Proposal Notwithstanding any other information provided in this solicitation or Vendor designation of certain documentation as confidential or proprietary, Vendor’s acceptance of this TIPS Contract constitutes Vendor’s consent to the disclosure of Vendor’s comprehensive proposal, including any information deemed confidential or proprietary, to TIPS Members. The proposing Vendor agrees that TIPS shall not be responsible or liable for any use or distribution of information or documentation by TIPS Members or any other party. By submitting this proposal, Vendor certifies the foregoing. Choice of Law clauses for TIPS Members If the vendor is awarded a contract with TIPS under this solicitation, the vendor agrees to make any Choice of Law clauses in any contract or agreement entered into between the awarded vendor and with a TIPS member entity to read as follows: "Choice of law shall be the laws of the state where the customer resides" or words to that effect. 2 Agreed Venue of dispute resolution with a TIPS Member In the event of litigation or use of any dispute resolution model when resolving disputes with a TIPS member entity as a result of a transaction between the vendor and TIPS or the TIPS member entity, the Venue for any litigation or other agreed upon model shall be in the state and county where the customer resides unless otherwise agreed by the parties at the time the dispute resolution model is decided by the parties. 3 Agreed Indemnity Limitation with TIPS Members Texas and other states restrict by law or state Constitution the ability of a governmental entity to indemnify others. TIPS requires that any contract entered into between a vendor and TIPS or a TIPS Member as a result of an award under this Solicitation limit the requirement that the Customer indemnify the Vendor by either eliminating any such indemnity requirement clauses in any agreements, contracts or other binding documents OR by prefacing all indemnity clauses required of TIPS or the TIPS Member entity with the following: "To the extent permitted by the laws or the Constitution of the state where the customer resides, ". Agreement is a required condition to award of a contract resulting from this Solicitation. Agreed
Review Procedures for Identifying Entity Accounts With Respect to Which Reporting Is Required For Preexisting Entity Accounts described in paragraph B of this section, the Reporting Finnish Financial Institution must apply the following review procedures to determine whether the account is held by one or more Specified U.S. Persons, by Passive NFFEs with one or more Controlling Persons who are U.S. citizens or residents, or by Nonparticipating Financial Institutions:
Member Access to Vendor Proposal Notwithstanding any other information provided in this solicitation or Vendor designation of certain documentation as confidential or proprietary, Vendor’s acceptance of this TIPS Contract constitutes Vendor’s consent to the disclosure of Vendor’s comprehensive proposal, including any information deemed confidential or proprietary, to TIPS Members. The proposing Vendor agrees that TIPS shall not be responsible or liable for any use or distribution of information or documentation by TIPS Members or any other party. By submitting this proposal, Vendor certifies the foregoing.
Entity Accounts With Respect to Which Reporting Is Required With respect to Preexisting Entity Accounts described in paragraph B of this section, only accounts that are held by one or more Entities that are Specified U.S. Persons, or by Passive NFFEs with one or more Controlling Persons who are U.S. citizens or residents, shall be treated as U.S. Accounts. In addition, accounts held by Nonparticipating Financial Institutions shall be treated as accounts for which aggregate payments are required to be reported under an FFI Agreement.
GENERAL COMPLIANCE WITH RESPECT TO THE APARTMENT Subject to Clause 12 above, the Allottee shall, after taking possession, be solely responsible to maintain the [Apartment/Plot] at his/her own cost, in good repair and condition and shall not do or suffer to be done anything in or to the Building, or the [Apartment/Plot], or the staircases, lifts, common passages, corridors, circulation areas, atrium or the compound which may be in violation of any laws or rules of any authority or change or alter or make additions to the [Apartment/Plot] and keep the [Apartment/Plot], its walls and partitions, sewers, drains, pipe and appurtenances thereto or belonging thereto, in good and tenantable repair and maintain the same in a fit and proper condition and ensure that the support, shelter etc. of the Building is not in any way damaged or jeopardized. The Allottee further undertakes, assures and guarantees that he/she would not put any sign-board / name-plate, neon light, publicity material or advertisement material etc. on the face / facade of the Building or anywhere on the exterior of the Project, buildings therein or Common Areas. The Allottees shall also not change the colour scheme of the outer walls or painting of the exterior side of the windows or carry out any change in the exterior elevation or design. Further the Allottee shall not store any hazardous or combustible goods in the [Apartment/Plot] or place any heavy material in the common passages or staircase of the Building. The Allottee shall also not remove any wall, including the outer and load bearing wall of the [Apartment/Plot]. The Allottee shall plan and distribute its electrical load in conformity with the electrical systems installed by the Promoter and thereafter the association of allottees and/or maintenance agency appointed by association of allottees. The Allottee shall be responsible for any loss or damages arising out of breach of any of the aforesaid conditions.
Right to verify compliance You are required to keep records (including proof of purchase) relating to the software you use under this agreement. Microsoft has the right to verify compliance with this agreement, at Microsoft’s expense. You agree to provide reasonable cooperation in the event of a compliance audit, including by allowing Microsoft, on request, to access the usage report as a tool in conducting the audit.
Your Guide to Selecting a Primary Care Provider (PCP) and Other Providers Quality healthcare begins with a partnership between you and your primary care provider (PCP). When you need care, call your PCP, who will help coordinate your care. Your healthcare coverage under this plan is provided or arranged through our network of PCPs, specialists, and other providers. You’re encouraged to: • become involved in your healthcare by asking providers about all treatment plans available and their costs; • take advantage of the preventive health services offered under this plan to help you stay healthy and find problems before they become serious. Each member is required to provide the name of his or her PCP. However, if the name of a PCP is not provided with the application, your enrollment will not be delayed and your coverage will not be cancelled. How to Find a PCP or Other Providers Finding a PCP in our network is easy. To select a provider, or to check that a provider is in our network, please use the “Find a Doctor” tool on our website or call Customer Service. Please note: We are not obligated to provide you with a provider. We are not liable for anything your provider does or does not do. We are not a healthcare provider and do not practice medicine, dentistry, furnish health care, or make medical judgments.
Agreement with Respect to Safe Deposit Business The Assuming Institution assumes and agrees to discharge, from and after Bank Closing, in the usual course of conducting a banking business, the duties and obligations of the Failed Bank with respect to all Safe Deposit Boxes, if any, of the Failed Bank and to maintain all of the necessary facilities for the use of such boxes by the renters thereof during the period for which such boxes have been rented and the rent therefore paid to the Failed Bank, subject to the provisions of the rental agreements between the Failed Bank and the respective renters of such boxes; provided, that the Assuming Institution may relocate the Safe Deposit Boxes of the Failed Bank to any office of the Assuming Institution located in the trade area of the Failed Bank. The Safe Deposit Boxes shall be located and maintained in the trade area of the Failed Bank for a minimum of one year from Bank Closing. The trade area shall be determined by the Receiver. Fees related to the safe deposit business earned prior to the Bank Closing Date shall be for the benefit of the Receiver and fees earned after the Bank Closing Date shall be for the benefit of the Assuming Institution.
Agreement with Respect to Leased Data Processing Equipment (a) The Receiver hereby grants to the Assuming Bank an exclusive option for the period of ninety (90) days commencing the day after Bank Closing to accept an assignment from the Receiver of any or all Data Processing Leases to the extent that such Data Processing Leases can be assigned.
Please see the current Washtenaw Community College catalog for up-to-date program requirements Secondary / Post-Secondary Program Alignment Welding HIGH SCHOOL COURSE SEQUENCE 9th Grade 10th Grade 11th Grade 12th Grade English 9 Algebra I World History/Geography Biology World Language Phys Ed/Health English 10 Geometry U.S. History/Geography Physics or Chemistry World Language Visual/Performing/Applied Arts English 11 Algebra II Civics/Economics Welding English 12 Math Credit Science Credit Welding WASHTENAW COMMUNITY COLLEGE Welding Associate in Applied Science Semester 1 Math Elective(s)* 3 WAF 105 Introduction to Welding Processes 2 WAF 111 Oxy-fuel Welding 4 WAF 112 Shielded Metal Arc Welding 4 Semester Total 13 Semester 2 Speech Elective(s) 3 WAF 106 Blueprint Reading for Welders 3 WAF 123 Advanced Oxy-fuel Welding 4 WAF 124 Advanced Shielded Metal Arc Welding 4 Semester Total 14 Semester 3 Arts/Human. Elective(s) 3 Computer Lit. Elective(s) 3 WAF 215 Advanced Gas Tungsten Arc Welding 4 WAF 288 Gas Metal Arc Welding 4 Semester Total 14 Semester 4 WAF 200 Layout Theory Welding 3 WAF 210 Welding Metallurgy 3 Soc. Sci. Elective(s) 3 WAF 226 Specialized Welding Procedures 4 Semester Total 13 Semester 5 Nat. Sci. Elective(s) 4 WAF 227 Basic Fabrication 3 WAF 229 Shape Cutting Operations 3 Writing Elective(s) 3 Semester Total 13 Program Totals 67
