Common use of Works Completion Certificate Clause in Contracts

Works Completion Certificate. Upon successful Completion of the Works, and prior to making an application to the Authority for issuance of Works Completion Certificates, the Contractor shall clear all plants, equipment, surplus materials, wreckage, rubbish and temporary work from the Site. The Authority shall, within 28 (twenty eight) days after receiving the Contractor’s notice and after being satisfied that the entire Works has been completed as per the terms of this Contract and more specifically in a manner and applying the criterion as set out in the Technical Specifications and further the Site has been cleared of all plants, equipment, surplus materials, wreckage, rubbish and temporary work by the Contractor: (i) issue Works Completion Certificates to the Contractor for its Works as specified under the Scope of Project, stating the date on which its Works was completed in accordance with this Contract, except for any minor outstanding works and defects which will not substantially affect the use of the Project or part thereof for its intended purpose; or (ii) reject the application, giving reasons and specifying the Works required to be done in order to enable it to issue Works Completion Certificates. The Contractor shall then complete the Works before applying further for Works Completion Certificate. (iii) If the Authority fails either to issue Works Completion Certificates or to reject the Contactor’s application within the period of 28 (twenty eight) days, and if the Completion of the Works or part thereof, as the case may be, covered under such application is substantially complete in accordance with the terms of this Contract, Works Completion Certificates shall be deemed to have been issued on the last day of that period. (iv) Once Works Completion Certificates has been issued in respect of the entire or any portion of the Works, the Contractor shall not be entitled to have any access to the relevant Site unless otherwise for rectifying any defects during the Defect Liability Period. After the Works Completion Certificate has been issued, each Party shall remain liable for the fulfilment of any obligation which remains unperformed at that time. For the purposes of determining the nature and extent of unperformed obligations, the Contract shall be deemed to remain in force.

Works Completion Certificate. (i) Upon successful Completion of the all Works, and prior the Contractor shall request Authority/DTA to making an application to the Authority for issuance of issue completion certificate (“Works Completion CertificatesCertificate”). Before making such request, the Contractor shall clear all plants, equipment, surplus materials, wreckage, rubbish rubbish, and temporary work from the Site. . (ii) The Authority shall, within 28 (twenty eight) days shall after receiving the Contractor’s notice and after being satisfied that the entire Works has been completed as per the terms of this Contract and more specifically in a manner and applying the criterion as set out in the Technical Specifications and further after determining that tests are successful, and the Site has been cleared of all plants, equipment, surplus materials, wreckage, rubbish rubbish, and temporary work by the Contractor: (ia) issue Works Completion Certificates to the Contractor for its Works as specified under the Scope of Project, stating the date on which its Works was completed in accordance with this Contract, except for any minor outstanding works and defects which will not substantially affect the use of the Project or part thereof for its intended purpose; or; (iib) reject the application, giving reasons and specifying the Works required to be done in order to enable it to issue Works Completion Certificates. The Contractor shall then complete the Works before applying further for Works Completion Certificate. (iiic) If the Authority fails either to issue Works Completion Certificates or to reject the Contactor’s application within the period of 28 (twenty eight) days, and if the Completion of the Works or part thereof, as the case may be, covered under such application is substantially complete in accordance with the terms of this Contract, Works Completion Certificates shall be deemed to have been issued on the last day of that period. (iv) Once Works Completion Certificates has been issued in respect of the entire or any portion of the Works, the Contractor shall not be entitled to have any access to the relevant Site unless otherwise for rectifying any defects during the Defect Liability Period. After the Works Completion Certificate has been issued, each Party shall remain liable for the fulfilment of any obligation which remains unperformed at that time. For the purposes of determining the nature and extent of unperformed obligations, the Contract shall be deemed to remain in force.

Works Completion Certificate. (i) Upon successful Completion of the all Works, and prior the Contractor shall request Authority/DTA to making an application to the Authority issue completion certificate for issuance of Animal House Facility (“Works Completion CertificatesCertificate”). Before making such request, the Contractor shall clear all plants, equipment, surplus materials, wreckage, rubbish rubbish, and temporary work from the Site. . (ii) The Authority shall, within 28 (twenty eight) days shall after receiving the Contractor’s notice and after being satisfied that the entire Works has been completed as per the terms of this Contract and more specifically in a manner and applying the criterion as set out in the Technical Specifications and further after determining that tests are successful, and the Site has been cleared of all plants, equipment, surplus materials, wreckage, rubbish rubbish, and temporary work by the Contractor: (ia) issue Works Completion Certificates to the Contractor for its Works as specified under the Scope of Project, stating the date on which its Works was completed in accordance with this Contract, except for any minor outstanding works and defects which will not substantially affect the use of the Project or part thereof for its intended purpose; or; (iib) reject the application, giving reasons and specifying the Works required to be done in order to enable it to issue Works Completion Certificates. The Contractor shall then complete the Works before applying further for Works Completion Certificate. (iiic) If the Authority fails either to issue Works Completion Certificates or to reject the Contactor’s application within the period of 28 30 (twenty eightthirty) days, and if the Completion of the Works or part thereof, as the case may be, covered under such application is substantially complete completed in accordance with the terms of this Contract, Works Completion Certificates shall be deemed to have been issued on the last day of that period. (ivd) Once Works Completion Certificates has been issued in respect of the entire or any portion of the Works, the Contractor shall not be entitled to have any access to the relevant Site unless otherwise for rectifying any defects during the Defect Liability Period. After the Works Completion Certificate has been issued, each Party shall remain liable for the fulfilment of any obligation which remains unperformed at that time. For the purposes of determining the nature and extent of unperformed obligations, the Contract shall be deemed to remain in force.

Works Completion Certificate. (i) Upon successful Completion completion of the Works, and prior to making an application all Works relating to the Authority Greenhouse Facility, the Contractor shall request Authority/DTA to issue interim completion certificate for issuance of Works Greenhouse Facility (“Interim Completion CertificatesCertificate”). Before making such request, the Contractor shall clear all plants, equipment, surplus materials, wreckage, rubbish rubbish, and temporary work from the site of Greenhouse Facility. (ii) Upon successful Completion of all Works, the Contractor shall request Authority/DTA to issue completion certificate for Animal House Facility (“Works Completion Certificate”). Before making such request, the Contractor shall clear all plants, equipment, surplus materials, wreckage, rubbish, and temporary work from the Site. . (iii) The Authority shall, within 28 (twenty eight) days shall after receiving the Contractor’s notice and after being satisfied that the entire Works has been completed as per the terms of this Contract and more specifically in a manner and applying the criterion as set out in the Technical Specifications and further after determining that tests are successful, and the Site has been cleared of all plants, equipment, surplus materials, wreckage, rubbish rubbish, and temporary work by the Contractor: (ia) issue Works Completion Certificates to the Contractor for its Works as specified under the Scope of Project, stating the date on which its Works was completed in accordance with this Contract, except for any minor outstanding works and defects which will not substantially affect the use of the Project or part thereof for its intended purpose; or; (iib) reject the application, giving reasons and specifying the Works required to be done in order to enable it to issue Works Completion Certificates. The Contractor shall then complete the Works before applying further for Works Completion Certificate. (iiic) If the Authority fails either to issue Works Completion Certificates or to reject the Contactor’s application within the period of 28 30 (twenty eightthirty) days, and if the Completion of the Works or part thereof, as the case may be, covered under such application is substantially complete completed in accordance with the terms of this Contract, Works Completion Certificates shall be deemed to have been issued on the last day of that period. (ivd) Once Works Completion Certificates has been issued in respect of the entire or any portion of the Works, the Contractor shall not be entitled to have any access to the relevant Site unless otherwise for rectifying any defects during the Defect Liability Period. After the Works Completion Certificate has been issued, each Party shall remain liable for the fulfilment of any obligation which remains unperformed at that time. For the purposes of determining the nature and extent of unperformed obligations, the Contract shall be deemed to remain in force.

Works Completion Certificate. (i) Upon successful Completion of the all Works, and prior including the items of Punch List, the Developer shall request Authority/DTA to making an application to the Authority for issuance of issue completion certificate (“Works Completion CertificatesCertificate”). Before making such request, the Contractor Developer shall clear all plants, equipment, surplus materials, wreckage, rubbish rubbish, and temporary work from the Site. . (ii) The Authority shall, within 28 30 (twenty eightthirty) days after receiving the ContractorDeveloper’s notice and after being satisfied that the entire Works has been completed as per the terms of this Contract and more specifically in a manner and applying the criterion as set out in the Technical Specifications and further after determining that tests are successful, and the Site has been cleared of all plants, equipment, surplus materials, wreckage, rubbish rubbish, and temporary work by the ContractorDeveloper: (ia) issue Works Completion Certificates to the Contractor Developer for its Works as specified under the Scope of Project, stating the date on which its Works was completed in accordance with this Contract, except for any minor outstanding works and defects which will not substantially affect the use of the Project or part thereof for its intended purpose; or; (iib) reject the application, giving reasons and specifying the Works required to be done in order to enable it to issue Works Completion Certificates. The Contractor Developer shall then complete the Works before applying further for Works Completion Certificate. (iiic) If the Authority fails either to issue Works Completion Certificates or to reject the Contactor’s application within the period of 28 30 (twenty eightthirty) days, and if the Completion of the Works or part thereof, as the case may be, covered under such application is substantially complete completed in accordance with the terms of this Contract, Works Completion Certificates shall be deemed to have been issued on the last day of that period. (ivd) Once Works Completion Certificates has been issued in respect of the entire or any portion of the Works, the Contractor shall not be entitled to have any access to the relevant Site unless otherwise for rectifying any defects during the Defect Liability Period. After the Works Completion Certificate has been issued, each Party shall remain liable for the fulfilment of any obligation which remains unperformed at that time. For the purposes of determining the nature and extent of unperformed obligations, the Contract shall be deemed to remain in force.